qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
With this compiler, external functions declared inside other functions
will end up in the wrong namespace.
Change-Id: Ia37283d632dbc2ee0c269aeffa1f045b3e60148e
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reimplementations of connectNotify() and disconnectNotify() can
assume that the signal argument is in normalized form, but after the
introduction of the Qt5 meta-object format, it could happen that it's
not.
The problem is that the internal QArgumentType class, which attempts
to resolve a typename to a type id, was calling QMetaType::type().
QMetaType::type() falls back to trying the normalized form of the
typename if the original argument can't be resolved as a type (this
behavior isn't documented, but that's how it works). This means that
e.g. QMetaType::type("const QString &") returns QMetaType::QString.
Since QMetaObjectPrivate::indexOfMethodRelative() (more specifically,
the methodMatch() helper function) prefers to compare type ids
over typenames (since the type ids are stored directly in the meta-
object data for built-in types), the method lookup would *succeed*
for signatures with non-normalized built-in typenames as parameters.
QObject::connect() would then think that it did not have to
normalize the signature (see "// check for normalized signatures").
The consequence was that the original, non-normalized form got
passed to connectNotify().
This commit introduces an internal typename-to-type function that
is the same as QMetaType::type(), except it doesn't try to normalize
the name. This way, the only place where normalization can occur in
the signature-to-meta-method processing is through the calls to
QMetaObject::normalizedSignature() in QObject::connect() itself.
The implication is that there are now cases where the method
signature will be decoded and processed twice, where processing it
once was sufficient before. On the other hand, it is consistent with
the pre-Qt5-meta-object behavior, where we predict that the
signature is already normalized, and only perform (comparatively
costly) normalization if the initial lookup fails.
Change-Id: Ie6b60f60b0f9a57ebd378d980329dac62d57bbd9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The QNetworkProxyFactory class considered the http_proxy environment
variable, but not the no_proxy one. This commit adds no_proxy handling,
loosely modeled after the way curl does it.
Change-Id: Ibb9e5ffcb30fed5c95dc9fc3bc4177e20d025a50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Q_DECLARE_METATYPE must be outside of the qt namespace.
System headers must be included outside of the qt namespace.
Change-Id: I2f48b1df87e5edae2baee6ce813af08d3e011dc0
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
static_metacall was never set on the metaobject written by
QMetaObjectBuilder::fromRelocatableData, sometimes causing a crash. It
should be initialized to 0.
Change-Id: I79373d895e131f0cc2ff1af6d2177a0c1a282be7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Such as
qdialogbuttonbox.cpp:259:1: warning: narrowing conversion of
‘2147483650u’ from ‘unsigned int’ to ‘const int’ inside { }
[-Wnarrowing]
Change-Id: I00d66d96ef3af1a46935a58119668a20f8fd58c7
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: I37b5de4bf1e9f9bbe53910eb5e3f490172b28371
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Delegates actual event inspection and reaction to the screen event
handler class already used by the PPS screen event handler
Change-Id: Ic07efa1de3f6b452f3091e901bd8a577175e3cf0
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Static plugins could so far not get loaded by
index. Implement the missing support for this.
Task-number: QTBUG-25274
Change-Id: I901b08bfaf4f9fc3cb9fcea0b47f3ed89588a27b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
set m_textureResource to 0 after freeing it, to
ensure we allocate a new one two lines below before
using it again 5 lines below.
Change-Id: Ib9c4de94aefed91f15d0fab0cd3c774a64f2f891
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This should help to silence coverity which was complaining
hundreds of times about Qt not initializing h and next in
QHashNode.
Change-Id: Ib7977693e9786d4b310799e4f428115c65bb3fee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Qt buildsystem is creating the config files for it even
when it is not building QtDBus, so Qt5DBus_FOUND = True.
Re-enable the CI testing on mac with this change.
Task-number: QTBUG-25522
Change-Id: I5d2690d17fde6c5aabcbdd3e2eef9f0846edd97d
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest fails to build after the introduction of the
QMetaMethod-based connect/disconnectNotify() functions; we are
intentionally keeping the old const char * versions (overloads) for
a limited time, to avoid disrupting other modules.
This commit will be reverted as soon as the compatibility overloads
have been removed.
Change-Id: I9b5a40b51ffa3bfa3d185410389678c262ca7b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The const char *-based API is deprecated and will be removed in Qt5.
Some of the reimplementations were commented out since the signals
being checked for aren't even declared by the relevant classes.
Change-Id: I4486d1f3242db21cebd55fb53def3904f7c236ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The const char *-based API is deprecated and will be removed in Qt5.
Change-Id: I1c7f0e46149964367f42faccfff4b89acbf16511
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The const char *-based API is deprecated and will be removed in Qt5.
Change-Id: I36f6dc761e3b5a087e38db29b761c3e9237958b4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The const char *-based API is deprecated and will be removed in Qt5.
Also fix a bug in the disconnectNotify() reimplementation; when all
signals are disconnected at once, disconnectNotify() is only called
a single time, with an invalid method as argument. Thus, the signal
connection count should be set to 0, instead of decremented.
Change-Id: Ieee92293777bff87f8b28e56e23ab55d0b8b8101
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The const char *-based API is deprecated and will be removed in Qt5.
Change-Id: Ica5b2c5020adf972db5005be8c062ddcdae8c0b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
warning: always_inline function might not be inlinable [-Wattributes]
Those function are only used in array of function pointers. They
cannot be inlined.
Change-Id: I82b10d82ac8915129dc8921b1a74d42d8547bc40
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Modality is not a boolean property in Qt. There are 2 types: window
modality and application modality. Native dialogs can support both of
these types as well (e.g. on Cocoa, a window modal file dialog should be
displayed as a Sheet). Remove the QPlatformDialogHelper::ShowFlags enum
and instead pass a Qt::WindowModality parameter to
QPlatformDialogHelper::show_sys().
The Windows implementation has been updated to check for
Qt::ApplicationModal instead of the ShowModal flag (since only
Qt::ApplicationModal dialogs are blocking).
The Cocoa implementation has been updated to only use non-modal and
application modal native color and font dialogs (which restores Qt 4
behavior). These are shared Cocoa panels that cannot be shown as sheets,
however. If the programmer asks for window modal color/font dialogs, we
use the Qt versions, not the native ones. The file dialog can be shown
either as a Sheet (but we need to pass an NSWindow parent for it to work
properly) or as an application modal dialog.
This change has been tested on Mac OS X with
tests/manual/windowmodality.
Change-Id: I9064987433895c55f68aac979ef8e8207fb24bbe
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Mostly straightforward porting: Add configure test from Qt 4. Add X11
include to qgtkstyle_p.cpp. Use renamed QGuiApplicationPrivate::showModalWindow.
Change-Id: I83020e13ec00b49f3fe346814f881bce19a6f602
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Maintain a current window state variable in QCocoaWindnow
and use it when setting the new window state on the
NSWindow.
The NSWindow state accessors can apparently not be
trusted, in particular isZoomed always returns true
for the Creator popup menu.
Change-Id: I78f13de251f3730752813bba17459011f8558aee
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Change-Id: I185db2361990dd1d503488a364826738270388b5
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Martin Smith <martin.smith@nokia.com>
The force_align_arg_pointer function attribute is not necessary for
MinGW-w64 to align stack for SSE and generates a compiler warning as
it is ignored. Do not use force_align_arg_pointer with MinGW-w64 to
silence the warning.
Change-Id: I58a754dc3ec01b36a1d3c9490f45ccf0824468ba
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QWindowsGLContext was returning always false for isSharing() query,
as it was falling back to default implementation.
Task-number: QTBUG-24192
Change-Id: I884d559d69545ef85a0d07d7287bc50ce459c1bd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Create a QPA specific subclass of the blackberry event dispatcher
(basically the BPS equivalent to the QUnixEventDispatcherQPA created
by createUnixEventDispatcher()).
Create an event dispatcher event filter that will receive all BPS events
and then either handle them itself or delegate to event subtype
specific handlers.
Change-Id: I112e0274156727d3aa9e5693b59d041c65be4daf
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
There is no implementation for this function so might as well remove
the declaration. The function is actually implemented by
QWindowsFontDatabase class, where it is also properly declared.
Change-Id: I8f5c050fa3f3c48b07e10f205eb0f7b16e12b737
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The test is passing in CI for both Mac and Windows, so removed the
insignification from it.
Task-number: QTBUG-24885
Change-Id: Ida39d98b72e49fc82358d016b8de725bbfc5d6de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Documentation for the 'more mouse buttons' feature has a Typo on
Qt::ExtraButton24 (is shown as "Qt::ExtraButton44", no value.)
Also, the order of BackButton/Xbutton1/ExtraButton1 causes the
'BackButton' value to be a forward reference to XButton1, which
makes it awkward and hard to understand. Same with ForwardButton/
XButton2/ExtraButton2.
Task-number: QTBUG-25529
Change-Id: I04b76d91d7a2155c1917a809a51700059320f510
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This test has been passing consistently since the previous crash was
skipped in commit 6dbd00b120.
Task-number: QTBUG-22792
Change-Id: I41ac001a3b9e16cde4d674dc9f34ab2dffb848cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has been passing consistently since it started running in CI.
Task-number: QTBUG-24295
Change-Id: If2a163607ae72cae9e28619dd5de1b333aea4ed9
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests have been passing consistently since they started running
on Windows in CI.
Change-Id: I4505497afc477a7f4fbda0acc29987d0d0cf220a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has been passing consistently since starting to run in CI.
Task-number: QTBUG-25445
Change-Id: Id024921b18ea4ef94ad2f47d9db2ccda3212eaaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has a single stable failure on both of these platforms. Mark
the failure with QEXPECT_FAIL (that was already the case on Ubuntu
11.10) and re-enable the test.
Note also the elimination of duplicate bug numbers.
Task-number: QTBUG-24234
Change-Id: Ica11e7d1f3cd9487647127984fef7c75e0e764fe
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Use qintptr and quintptr for exchanging data with registers for cpuid
as the size of long does not match the size of the register on Win64
which uses the LLP64 data model.
Change-Id: I23b8c8e0977166f7e62795c16e9080e44d9f25f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This only works with CMake 2.8.8, but it is no harm to earlier versions.
Change-Id: I62c220e4b24f951e83c23eb57d5f833de4d181c5
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I319b04cdb21860652658ee8d3e577d41a913ed5a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I30ca05d3c692a707cfe829ad5fee099549bab540
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
