Test requires that tst_qiodevice.cpp is available on file system,
but since we're not able to deploy directly to the file system
on Android and since we want to actually test file system access,
we bundle it in qrc and copy it out during initialization.
Change-Id: Ida2b5bf6f1dcd43bc740a2b9380352bab5eb6c62
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Some of the tests expect QDir::homePath() and QDir::currentPath()
to be different, so we just set the current path to something
other than QDir::homePath().
Change-Id: Ib048d323f4745369821765230b995a73b8a97145
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test may not be possible on Android, since the file system
can be mounted with noatime or relatime which means read access
will not be registered.
Change-Id: I40f587e1a1f131ee06f0e3700e908ccaa19c83ce
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Since there's no way to deploy files directly to the file file
system on Android, we put them in a qrc file and extract them
on startup.
Change-Id: I6a42aa5e0372bfd9fb2f7ccfea964c9c3c2e45d8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires that the resources are also available
in the file system. Since it's not possible to deploy directly
to the file system using Android, we extract the files on
startup instead.
Change-Id: I1d1fe7d62c4c618a89713e3a7d1903e42bfb10b8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
There's no way to install files automatically into the file
system on Android, so to test QDir on the file system, we have
to bundle the files in qrc and then copy them into the file system
on startup. This adds some complexity, but at least it will detect
regressions.
We also need to make sure the current directory is the same as
the data path, since the test assumes this, and /usr/ does not
exist on Android, so we have to use a different path to find the
root path.
Change-Id: I18d79b5ed99a0afff573beb30c61745c403f8991
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This will arbitrarily fail at certain points. Adjusting the
timeouts helps, but it's very unpredictable, so it's better
to do what we do on Windows and just expect-fail the results
that we get.
Change-Id: Ie6033c73539c2dd69115b06096919e173f097367
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add all test data to resources.
Change-Id: Id42a4c033b75409f65cb4d56ebf1161336b93832
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: Ic12f8fce9afb965aff32e7141516c8d223e64491
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I7f9e7650156b174b7c16270d86b78e9408dff254
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add test data to resources.
Change-Id: Ib8a5688e7caab8434b8f0676f53a2a79ec94b264
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Wait for the subprocess to print "ready" before assuming that it is
ready to receive calls. waitForStarted() will return as soon as the
child is running, but it may not have registered on D-Bus yet.
This also solves the synchronization problem more elegantly than how
tst_qdbusmarshall.cpp was trying to do it.
Change-Id: I548dfba2677cc5a34ba50f4310c4d5baa98093b2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The executables are not in the same dir as on Unix, so we need to use
QFINDTESTDATA to find them. The DESTDIR setting prevents qmake from
placing the executables in a "debug/" subdir.
Change-Id: I1d6d10e6f6f109f55fd9809dcf83da0386f38772
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Rohan was right in e88f9a92b7 to stabilize
the test and reset the state, but killing the subprocess is overkill.
All we need is to reset the state in both applications, which includes
disconnecting and reconnecting to the peer, to discard any sent but not
yet received messages.
Change-Id: Ie01392e6e63bd70ef8345217d3fc641ed63c7aba
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QDBusServer::address() will return an empty QString, which caused the
tests to fail later with no apparent reason.
Change-Id: I86f448dfc67a6cdb27ecda2d490f335766cfaf4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows the tests to be run on Windows too by using TCP socket
connections instead of requiring Unix sockets. The tests shouldn't have
hardcoded the path, which came from QDBusServer anyway. Now the tests
simply defer to QDBusServer.
This is a slight behavior change for Windows, but not one that should
matter since anyone who was using the default constructor resulted in a
QDBusServer that failed to listen.
[ChangeLog][QtDBus][QDBusServer] Fixed a bug that made QDBusServer's
default constructor try to bind to a Unix socket on non-Unix systems.
Now QDBusServer will attempt to bind to a TCP socket instead.
Change-Id: I2a126019671c2d90257e739ed3aff7938d1fe946
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QLibrary does not append the version suffix on Windows by itself, since
there's no established practice on how to do this. The MinGW builds of
dbus-1 call it "libdbus-1-3.dll", so we need append the suffix
ourselves.
Unfortunately, other names like "dbus-1.dll" have been seen in the wild,
so we need to try both basenames (Windows doesn't prepend the "lib"
prefix). Both basenames work on Unix, so give "libdbus-1" on Unix since
that will result in one fewer stat.
Change-Id: I92506df5fd30c7674216568406bf86b25bf646b8
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
No need to loop twice to add the "native" entries, since they are added
by the helper function anyway.
Change-Id: I9caabc6fc4973a90b483840815769b1351947a89
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The cookies may contain sensitive information. so we should not store cookies in disk cache.
Task-number: QTBUG-42546
Change-Id: I6331bdd766445af41f55bfaf0e9132b75dd7957f
Reviewed-by: Jeongmin Kim <jm86.kim@lge.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Glibc will use the intrinsics for 32- and 64-bit, but didn't for 16-bit
(probably because GCC didn't document it until version 4.8), so this
commit will make us access the intrinsics directly the intrisincs for
all type sizes.
Additionally, this will get us access to the compiler intrisics even
without Glibc, such as when building against uclibc or Bionic.
Another benefit is that both Clang and ICC will use the MOVBE
instruction on Atom and Haswell architectures.
Change-Id: I39d1891f479887d719d69ebe4ac92ac9bfeda8af
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QFile::readAll could be asked to read a file that is over 1 GB in size
and thus cause an assertion:
ASSERT failure in qAllocMore: "Requested size is too large!", ...
The idea behind the existing code was correct, but the value was wrong.
It prevented overflow of the integer size request, but didn't prevent
overflowing the storage size.
Change-Id: I072e6e419f47b639454f3fd96deb0f88d03e960c
Reviewed-by: Martin Smith <martin.smith@digia.com>
The BSD4 code (including OS X) calls sysctl and if that fails, it sets
cores to -1. Similarly, the generic Unix code calls sysconf() and
assigns the returned value to cores, but sysconf can return -1 on
failure.
Change-Id: I9e521d366e9c42f36c2ba20a37e7a74539ddb8f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Put also processing of control activation into initial timer check for possibly
pending mouse release event.
[ChangeLog][QtWidgets][QScrollBar] Fixed a bug where the valueChanged() signal
was emitted twice if a connected slot took too much time.
Task-number: QTBUG-42871
Change-Id: I7bad5279ef84463a033b55256d241d4445374081
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Add a functions to dump out texts character by character and
as code.
Task-number: QTBUG-43191
Change-Id: I1ac17f2485563f909b71bb1fbd1fd595d1d94223
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On Android, none of the file system paths used for QFINDTESTDATA
currently are suitable. We do have the possibility of putting
test data in qrc, but in cases where the test is specifically
testing access to the regular file system, we need a way to
find files there as well. We add a fifth step when all other
fail, which searches the current active directory for the data.
Change-Id: I4f02f8530b5843eb282bd112ea03ed6a476593d6
Reviewed-by: BogDan Vatra <bogdan@kde.org>
QStandardPaths::writableLocation() is documented to return the
empty string if no matching writable location can be determined.
This is the case for e.g. FontsLocation and ApplicationsLocation on
Android. We need to still accept this as a valid response.
Change-Id: I2824e9dcfd41b1c24dbf3896b7ae9b5260e9accd
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The test expects all the files to reside in the file system,
both for loading the runtime resources and for comparisons.
Since we can't deploy directly to the file system on Android,
we go via qrc and extract the files on startup instead.
Change-Id: I17ff8985cb17dbfc45f0fb692ca46558bb5c5cdc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This fixes a regression introduced with
c09e9f71173a698670d6c728291ee24f53d50800 which caused the lineedit to
clear the whole text when an invalid character was entered into a lineedit
with an echo mode that was not Normal and a validator was set.
Now if undo() is called directly then it will still clear the text as it
is considered to be called as a user. Whereas the validation will take
care of the invalid entry by using internalUndo() as before which avoids
the clearing of the entire text.
Task-number: QTBUG-29318
Change-Id: I5ff5777a75ab864de2217441b5f518f50646bd8f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
They were made 'private' as a side effect of a change enabling
support of template friends for MSVC. However, accessibility
is part of the MSVC's name mangling and thus BC was broken.
[ChangeLog][Important Behavior Changes] Restored binary
compatibility with Qt 5.3.2 on Windows when using MSVC 2012 or
MSVC 2013. This means that Qt 5.4.1 is no longer binary compatible
with Qt 5.4.0 when using either of those compilers.
Change-Id: I18679aa15821a7365606dc80fdc8411641573820
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This update fixes some links in the table of contents on class
reference pages. Links to sections of reimplemented functions did not
work because the word 'reimplemented' was not included in the anchor.
This update fixes that bug.
Change-Id: Ifae972c45ebf6c81e865cfb36f645ea42d74cf55
Task-number: QTBUG-42237
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reported on qt-interest: should say "true" instead of "false".
Change-Id: Ic9d2608631679896179ae8601790847163a9224c
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Since those are unpredictable, there's little we can match, besides the
"0x" for the QThread pointer. For the PID, at least we can compare it to
the value from QProcess.
Change-Id: I89420306863b95c82be761baabd733a7f17eba5e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This test fails if the environment has the variable set.
Change-Id: Ibd54ff3e6e22a885341898889088ac56e84282b1
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Our theory for the failure of framePosition() not having the expected
value after setFramePosition towards the end of the test is that we try
to call setFramePosition() while the getting-back-from-fullscreen-to-normal
window animation is still running, at which point the compositor may
just choose to ignore our move request.
Similarly to when going fullscreen, also wait when coming back from it.
Change-Id: Icfc92f277d96dccdfad772c4aac252b2a20c6196
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
It appears that there is no code in the plugin that actually uses dbus.
Change-Id: I654cf0b8f5ecc018f2c6ae8701220f7496915a60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The patch was incorrect and caused semi-transparent images
have inversed colors instead of fixing it.
This reverts commit 624740cdcd.
Change-Id: I3f1fa17309fcb53995520843449aae972e0090b8
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Screen sometimes returns a refresh rate of 0. This has been observed
on VMWare though it is unknown if this is always the case and whether
it happens on other platforms as well. Returning a refresh rate of
0 causes animations to fail so we're better off returning a value that
might be wrong than returning 0.
Change-Id: I4846017bcb0d6bd52faad727df4ef6dac1a6250f
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This method is not being called anywhere.
Change-Id: Ia32e8b48d324e4848db666de4d274a260d22b06d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
It's possible to get 0 for baseQtKey in case Caps Lock is used as
a layout switcher. So don't include this value in the result.
Similar fix was in commit d904533acb.
Task-number: QTCREATORBUG-9589
Change-Id: I46fc91f9faf6fd0699f062a72fd2ca3187232f5a
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The extra character was added in 5.4.0 to allow web browsers to
break up long function signatures in a nice manner. However, not
every browser supports it, and it causes problems in some code
editors when copy-pasting the code.
Change-Id: If6a52b92d683788c5e32f40bb8c280d76112723e
Reviewed-by: Martin Smith <martin.smith@digia.com>
What gets passed to this function is in milliseconds, not seconds (see
QSystemTrayIconPrivate::showMessage_sys_qpa implementation), and the only
currently existing implementation (in KDE frameworkintegration) expects
milliseconds as well.
Change-Id: I7a2c847530391aa73183704251c996664668a740
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Fixed regression bug of the commit #fc11798
Change-Id: I3d64fd67dfe2196a726886a19b9510dd12ff255d
Task-number: QTBUG-43392
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add the source widget to the texture list (may be null for custom
compositor implementations that add textures not belonging to actual
widgets). This allows us to do proper checks with the
dirtyRenderToTextureWidgets list.
As a result paint events are only sent to a QOpenGLWidget if (1) there
was an update() for it or (2) it was actually marked dirty. (2) was
previously behaving differently: the widget got a paint event when
anything in the window has changed. This is fine for naive animating
OpenGL code but less ideal for QGraphicsView.
Bool properties like stacksOnTop are now stored in a flags value to
prevent future explosion of texture list fields and parameters.
Task-number: QTBUG-43178
Change-Id: I48cbcf93df72ac682c9b5d64982a8b648fe21ef3
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
