Replaced the ullong with Modulebitsets for when the number of modules
exceeds 64
Pick-to: 6.4
Change-Id: I489d35bc53d6aacf7907f75957bd8c6d21fbeb60
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Both clang-cl and clang-mingw supports WinRT facilities now, so
there's no need to limit WinRT usages to MSVC only.
Change-Id: Ib3019db62a038f0ebb5f20210c0a12ee296e7f71
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QWidgetWindow dispatched only tablet presses to the toplevel widget if
no child was found at the position; other events, such as hover events,
were discarded. The tabletTracking test case even documented that
shortcoming in a comment.
Fix that by falling back to the toplevel widget for any event. As
before, only press events initialize the tablet grabbing target widget.
Remove the now unneeded parent widget from the test case, and move the
test class into the only test function that uses it.
Amends ea615b421b and
8fd6cef372.
Pick-to: 6.4
Fixes: QTBUG-108747
Change-Id: I79050f1e063931e439945f64b50712dcc1ecb18c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make the code snippets consistent, update the comparison table
and fix some sentences.
Pick-to: 6.4 6.2
Change-Id: Ic8baaa56805392855736164efa03d065330309fa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For QSet, the key_type is const, so can't test assiging to it.
Pick-to: 6.4
Change-Id: I9d363ef3fe52646b937d6a422227b19c48fdaf1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Because they are too convenient to leave out.
Change-Id: I844cfb794ce0f575c2c65075d9051b0b878a434f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure that touching any file that is part of a qrc resource
actually rebuilds the resource and the target that depends on the
resource.
Pick-to: 6.4
Task-number: QTBUG-107687
Task-number: QTBUG-108113
Change-Id: I1153dc13fee44ffe59d2685a8cb33303538b026c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
There seems to be some confusion from back when the example were
mass-ported to the QOpenGL stuff in Qt 5 times.
Pick-to: 6.4 6.2
Fixes: QTBUG-109119
Change-Id: Ic4bcd010df3fcf82e16385ce241b379f0c351788
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Overloading insert is a bit tricky since the size might change after
the conversion so either the tail has to be moved twice or a temporary
buffer is needed. For now, add an ineffective but simple overload as in
the case of the const char *s overload, and do the performance
optimization in a follow-up task (QTBUG-108546).
[ChangeLog][QtCore][QString] Added insert(QUtf8StringView) overload.
Task-number: QTBUG-103302
Change-Id: If01c216ff626da29abb43eb68d4de82824f3bfba
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The += operator is already overloaded to handle QStringView and
QLatin1String - add the missing QUtf8StringView overload.
[ChangeLog][QtCore][QString] Added operator+=(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: Iec6940bad7866310c826a130b98accebc3c82aa8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add the missing overload, among other things it is needed to
implement QTBUG-103302.
[ChangeLog][QtCore][QString] Added append(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: I576f73c1919e3a1f1a315d0f82c708e835686eb1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
For the case of static builds. Also, remove somewhat funny comment
from the shared tlshelpers.h file.
Fixes: QTBUG-105046
Pick-to: 6.4 6.2
Change-Id: I2fd677a11b64df89c0ad0237e1014f5e80144c24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To prevent validation errors with VUID-VkMappedMemoryRange-memory-00684
although I cannot actually trigger this on Windows. Based on the spec
however the right thing seems to be to flush before unmap.
Pick-to: 6.4 6.2
Fixes: QTBUG-109123
Change-Id: I34fedea22a6e6e2a14f9b95fea49af05985ec4cb
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The convenience of having a QErrorMessage pop up a dialog when a log
message is emitted should not prevent the existing message handler
(typically the default handler, logging to console e.g.) from getting
a stab at the messages.
Change-Id: I45ba9128f509e85cd60f4e678cf8ec50bb0f93f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The class was not written to handle categorized logging, which was
added after its inception. Processing categorized logging can quickly
lead to issues, as showing the QErrorMessage may trigger categorized
logging in itself.
Change-Id: Id1d3a75acc1e6d1a69493fa722a733ae2f1f5f63
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The API is supported on macOS, iOS, and Windows. On Android no official
API exists for badging the application icon, and we don't want to take
on dependencies like ShortcutBadger [1].
The macOS and iOS implementations are trivial. The same goes for
the WinRT based implementation on Windows, but this API is only
available for applications that have a so called "package identity",
and does not seem to be stable for Windows 10.
To cover the cases where this API is not available we fall back to
drawing the badge manually, and set it as an overlay icon on the task
bar using ITaskbarList3. The look of this badge has been tweaked to
match the Windows 11/10 styles, and will pick up the user's choice of
dark/light mode and accent color if available.
[1] https://github.com/leolin310148/ShortcutBadger/
[ChangeLog][QtGui] Added QGuiApplication::setBadgeNumber() to inform
the user about e.g. the number of unread e-mail or queued tasks.
The badge will be overlaid on the application's icon in the Dock
on macOS, the home screen icon on iOS, or the task bar on Windows.
Task-number: QTBUG-94009
Change-Id: I6447d55177f9987b0dfcd93caf63c6167f7224c7
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test functions tst_QWidget::optimizedResizeMove and
tst_QWidget::optimizedResize_topLevel use a custom widget to record
paint events in a boolean.
Using QTRY_* or qWait() to wait for the boolean to become true stops
event processing upon consumption of the first paint event.
In case of multiple paint events, the next paint event will be recorded
in the next check and may lead to a wrong result.
This leads to flakiness on platforms generating multiple paint events,
openSuSE Leap 15.4 / XCB being one of them.
This patch replaces the boolean with a counter. It adds a
waitForPaintEvents method to the custom class, which processes events,
until the counter stops increasing. It returns true when paint events
have been recorded and false otherwise. It resets the counter after
each call.
It also removes the QSKIP on wayland, as the failure results from the
same reason.
Fixes: QTBUG-109093
Pick-to: 6.4
Change-Id: I59ee8bb4efeaf5417d5749d21e384bee89301ae0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][iOS] Added native font dialog support for iOS.
Task-number: QTBUG-109059
Change-Id: If38e990e1c5e9fc1a303fce3e79c09c2d45daaa0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We need to redirect the console output to the parent process
for GUI applications on Windows, otherwise we won't get any
output if we start the application from the console, because
the SUBSYSTEM of GUI applications is not CONSOLE by default.
But we don't want to change the default behavior of Qt, so
we control this feature through an environment variable
"QT_WIN_DEBUG_CONSOLE". It accepts two string values:
(1) "new": the application will try to create a separate
console window and redirect everything (cin/cout/clog/cerr)
to it. If you are running the application in an IDE, you
won't be able to get anything from the IDE's console anymore.
(2) "attach": the application will try to attach to the parent
process's console, if there is one. When we attached to it
successfully, we'll redirect everything to it.
Change-Id: I3ef98f6c0603f64fcc4e8e974411c5ed83c5d36f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also add optimizations for more string comparisons and add tests and
benchmarks.
[ChangeLog][QtCore][QString] Added utf-8 case-insensitive comparisons
Fixes: QTBUG-100235
Change-Id: I7c0809c6d80c00e9a5d0e8ac3ebb045cf7004a30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On each run of androiddeployqt involving gradle, the "merging" of
gradle's *.properties files inserted empty lines.
Change-Id: I7a8314cd0adf4d85663f17ac22967a08cab42b91
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I981213c296bafc81663b08c0f1f339bbd8a96485
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I3d81cf10b7eb74433ce5bea9b92ce6bce1230dcd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Note that this also affects operator_pluseq_data, which is basically
a wrapper around append_data.
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I09ed950e3f0e71ae9ae85a455f42e130887f1109
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
For some reason, it wasn't documented.
Pick-to: 6.4 6.2
Change-Id: I480623398dc33be91e82b24ac2616bcdd20da34b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Add Android templates, bindings and gradle wrapper files to custom
targets so they can be easily tracked by the project tree when using
Qt Creator for example.
Change-Id: I4144b9ee461139a9f768c57b14139e0fc21d4c28
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add the flag to enable the verbose output of QtCompressMimeDatabase
script. Disable the verbose output by default.
Change-Id: I781037b126bef5e3aff69c0738aaea99b932b7e7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Given the growing adoption of Wayland calling X11 regular is becoming less and less true
Make the description more neutral in that regard
Change-Id: Iac2b5dd7f80f019df5d046c90ab3466c9fa02bff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch adds a manual test and the required work in graphicsview and
qwidget private apis to support stereoscopic rendeing. Basically it
works by doing the drawing in QGraphicsView::paintEvent twice, once for
each buffer. This way the scene items are rendered to both buffers.
There's also an update to resolvement in QOpenGLWidgetPrivate
so that multisampling works correctly.
[ChangeLog][Widgets][QGraphicsView] Added support for
stereoscopic rendering.
Task-number: QTBUG-64587
Change-Id: I20650682daa805b64fe7f0d2ba086917d3f12229
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
m_context2d in QWasmWindow might be null if the window uses OpenGL
for rendering. It is dereferenced nevertheless in ::paint(), which
should be avoided.
Change-Id: Id817f3663bb475d55dfc916b4b7eb255a88cea9d
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
const return types prevent move semantics, so drop the const.
This is BC, because the operators are all inline free functions. In
particular, they're not exported (MSVC mangles the return type).
[ChangeLog][QtCore][QString/QByteArray] operator+ no longer returns
a const object, enabling move-semantics on the return value, but also
hidden detaches.
Change-Id: Ifc18f6b1df1e3840f57b2521949dbade8e11fd76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce the variable QT_SKIP_SETUP_DEPLOYMENT to turn off the
generation of deployment support files. Set this variable when building
Qt - but only if we're not building examples.
This avoids a warning about missing patchelf when building Qt with CMake
< 3.21.
Change-Id: I8ff5491eb314ff870c210884fbf90dd4c9ad0219
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Turn the FATAL_ERROR into a WARNING and explain what patchelf would be
used for.
Also, store the patchelf executable just as "patchelf" if it could not
be found. Now it's possible to install patchelf after configuring a
project.
Fixes: QTBUG-109004
Change-Id: I1e89b4c5851f341e000e563d1437398b454c68f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
An MSVC debug-and-release build of Qt with the MySQL plugin requires
separate builds of the MySQL client library: a debug and a release
build. There was no way to specify the debug version of the library.
Now, it's possible to configure Qt like this:
cmake ... \
-DMySQL_ROOT=D:\mysql-connector-c-6.1.11-winx64 \
-DMySQL_LIBRARY_DIR=D:\mysql-connector-c-6.1.11-winx64\lib\vs14
This will automatically detect the include dir and the debug and release
library files. We expect that the debug build of the MySQL client
library resides in a "debug" subdirectory below MySQL_LIBRARY_DIR.
If the automatic detection doesn't work to due a different layout on the
build machine, one can set the variable MySQL_LIBRARY_DEBUG to specify
the debug variant of the MySQL client library.
[ChangeLog][CMake] If pkg-config is not used, a debug build of the MySQL
client library can be specified with
-DMySQL_LIBRARY_DEBUG=<path-to-library>. The debug and release variants
of the library are automatically detected. Setting MySQL_ROOT and
MySQL_LIBRARY_DIR is sufficient in most cases.
Pick-to: 6.2 6.4
Task-number: QTQAINFRA-4999
Change-Id: I663fb8ac1dbd07bc73484791be9cc21bff2f4a9b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This is done to avoid cmake syntax errors when adding new tests.
Change-Id: I8106b13a865b990c52e09573488881bd18e64c7f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It looks like these targets used to manage some custom commands that
belong to HEADER_MODULES. We don't currently have a need to use them,
so we clean up the code.
Change-Id: I8095f4de2c91a6c310cccb9b89514c2ce77e32f0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no reason for adding dependency to the custom
'_pri_dep_timestamp' target instead of the INTERFACE_LIBRARY target
itself. This will close the chains of dependency between repo targets
and the HEADER_MODULE dependencies.
Pick-to: 6.4 6.2
Fixes: QTBUG-108815
Change-Id: I0e170d3e0e42d342881beb8aca1cc5a764425826
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Building repo targets may be incomplete as we skip adding
INTERFACE_LIBRARIES as dependencies. This leads to the missing
artifacts belonging to HEADER_MODULES. It seems reasonable and safe to
include INTERFACE_LIBRARIES in the list of dependencies of the repo targets.
Pick-to: 6.4 6.2
Task-number: QTBUG-108815
Change-Id: I83f44018f42dcf2fb1e3299461e17ef53e79c2e5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The values should come from android-clang mkspecs. The hardcoded
values don't work correctly with recent Android NDKs.
Pick-to: 6.4 6.2 5.15
Fixes: QTBUG-108662
Change-Id: Ie153a50ee0c49bd4f0704b588a4e2c87a05c1063
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Add the '-mimetype-database-compression' command line argument that
allows to select the preferred compression type for the mime type
database, including 'none' compression type, which avoids mime type
database compression even if respective compression APIs are present
in the system. The argument has the CMake alias called
'INPUT_mimetype_database_compression'.
Change-Id: I66daddae7014d109fa175a5f397e984928f4ee47
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use tools that compress mimetypes database directly from CMake as
a fallback mechanism instead of using perl and batch scripts.
Move the generating of the mimetype database resources to build-time.
This removes the perl-based compression from the possible compression
options. But assume that CMake-based compression should fill this gap.
CMake versions less than 3.26 don't support the value of the zstd
compression level higher than 9, so we prefer to use the External API.
Task-number: QTBUG-108438
Change-Id: I5686a53b766a243052cfee320f570e2c3b385726
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Adding the list definition to BUILD_OPTIONS requires unpleasant
escapting. This avoids an extra expanding of the BUILD_OPTIONS
argument and allows using the bracket-based escaping for semicolons.
Pick-to: 6.4
Change-Id: Ic5ff97c011fb67f61c66ad4e1a2ba43f44462932
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
