If one doesn't set CONFIG+=neon in it's mkspec but the compiler enables
it, Qt fails during linking of libQtGui,
because simd.prf isn't executed as needed (doesn't run into neon{..}).
Although a mkspec which enabled neon (-mfpu=neon) without CONFIG+=neon
could be considered broken,
it's still simpler to just 'fix' Qt to not fail unexpected.
Follow-up to e5066a3a2e
Task-number: QTBUG-37264
Change-Id: I3aa0afbe430547971e76c2c988697c133d69796b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Platforms like eglfs will not allow opening more than one OpenGL-based
window. To prevent aborting the hellowindow example when invoked without
--single, enhance the capability check to include also WindowManagement
in addition to ThreadedOpenGL.
Change-Id: I147d90b31d9fd94912c36339d36af3f311aaa874
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
This patch adds a new config option to qmake to enable full optimization
where it makes sense. This currently is supported on all gcc like
compilers by exchanging -O2 for -O3.
In qtbase it is used to enable full optimizations on qtcore and qtgui
and in a later patch can be used to replace similar existing logic in
QtWebKit's WTF and JavaScriptCore modules.
This fixes a performance regression from gcc 4.7 to 4.8 in the software
renderer.
An aliasing error in qregion.cpp which was exposed by more aggresive
optimization has been solved as well.
Change-Id: Ic2c6c41b79cb3846212b40e7bcc11ff492beb27f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We should not accept or process messages on closed streams, and unless
we are in a half-closed state (having initiated close ourselves), we
should respond to FIN with a FIN of our own.
This patch means we no longer trigger all the corner case teardown on
common sites that were fixed in earlier patches.
Change-Id: I0d2bab62700a0022a959e66c7053afbad07a9f7e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
sub-attaq/boat_p.h:134:9: warning: private field 'key' is not used [-Wunused-private-field]
Change-Id: I3f4cb1325aaac71d2bf0e7807381742937d173f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Relevant part from libxkbcommon's configure.ac file:
xkb_base=`$PKG_CONFIG --variable=xkb_base xkeyboard-config`
if test "x$xkb_base" = x; then
xkb_base=$datadir/X11/xkb
fi
AC_ARG_WITH([xkb_config_root],
[AS_HELP_STRING([--with-xkb-config-root=<path>],
[Set default XKB config root (default: xkeyboard-config install path)])],
[XKBCONFIGROOT="$withval"],
[XKBCONFIGROOT="$xkb_base"])
AC_SUBST([XKBCONFIGROOT])
This patch implements an equivalent logic in Qt's configure script (with some
additions).
Change-Id: I25968f76021e120e2439d2756121bbe3c5e18c98
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On FreeBSD Compose files are stored in different place than on Linux
distributions, this patch adds new search paths.
Change-Id: Ic1e745801a2f9a53d1af058be8a1dfaced5032a7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Instead of checking for dynamicgl in QT_CONFIG, which is apparently
not possible, revert them and do it in opengl.prf instead.
Dynamic GL is Windows-only for the time being so this should be sufficient.
Change-Id: If293ea4c9b024df52257086c8b6250602a44724d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
GLX_NONE is not 0, so it doesn't work as end-of-list marker
The documentation explicitly mentions to use None or NULL
Fixes valgrind warning
==22686== Conditional jump or move depends on uninitialised value(s)
==22686== at 0x78949AF: glXCreatePbuffer (glx_pbuffer.c:709)
==22686== by 0xDD7F0E1: QGLXPbuffer::QGLXPbuffer(QOffscreenSurface*) (qglxintegration.cpp:515)
==22686== by 0xDD624B0: QXcbIntegration::createPlatformOffscreenSurface(QOffscreenSurface*) const (qxcbintegration.cpp:259)
==22686== by 0x4F1D6A2: QOffscreenSurface::create() (in /usr/lib/x86_64-linux-gnu/libQt5Gui.so.5.2.1)
==22686== by 0xDD80248: QGLXContext::queryDummyContext() (qglxintegration.cpp:454)
==22686== by 0xDD803F0: QGLXContext::supportsThreading() (qglxintegration.cpp:488)
==22686== by 0x5BD9927: QSGRenderLoop::instance() (in /usr/lib/x86_64-linux-gnu/libQt5Quick.so.5.2.1)
==22686== by 0x5BF969E: QQuickWindowPrivate::init(QQuickWindow*) (in /usr/lib/x86_64-linux-gnu/libQt5Quick.so.5.2.1)
==22686== by 0x5C97BFC: QQuickView::QQuickView(QWindow*) (in /usr/lib/x86_64-linux-gnu/libQt5Quick.so.5.2.1)
==22686== by 0x40636F: startShell(int, char const**, void*) (main.cpp:91)
==22686== by 0x407125: main (main.cpp:193)
Change-Id: Ib4f5ae50f7e31d3fbeb5acf67753e1d8b9e434b0
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
At least if the platform plugin's QPlatformOpenGLContext implementation
supports it.
This completes the QOpenGLFunction changes necessary for dynamic loading
of the OpenGL implementation. Everything else is up to the platform plugin.
Change-Id: I710e6fbee3005360ecf02bc6ef976e1beb513819
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
In this scenario there is a widget with a QPushButton inside, and you
click the pushbutton with the tablet. The target of the event is the
pushbutton, but when you click it, the window is destroyed. The
widgetwindow destructor cannot check the pushbutton's window() because
it has already been destroyed. So it seems we have to store both
widgets: the actual target and the parent widget which has the window.
Task-number: QTBUG-36848
Change-Id: I37d8fb03743f3e501d695342edc42de104777b18
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
- QVariant can store (U)Int, (U)LongLong, Float and Double numbers.
Previously, QJsonValue::fromVariant() converted Floats into Strings
while converting the others to Doubles.
- Add unit tests for QJsonValue::fromVariant()
[ChangeLog][QtCore][JSON] QJsonValue::fromVariant() will now convert
single-precision Floats into Doubles instead of Strings
Change-Id: I457adbe29c37ada611d1c6d711c42866d63d4024
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
If you tried to demarshall in a write-only QDBusArgument, the class
would print a warning, but will continue running nonetheless. So instead
just initialize everything, despite the warning.
qdbusargument.cpp:1138:30: error: ‘d’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
qdbusargument.cpp:1165:33: error: ‘s’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
qdbusargument.cpp:1301:15: error: ‘y’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
etc.
Change-Id: I6d713b4a7b7639e31f3b39bb488ad3ed3ab3fa4a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Qt 4 used to have it called LICENSE.GPL3 since we used to have GPLv2 as
an option before Qt 4.5 (which is when we added the LGPL v2.1). Looks
like no one realized that the configure script looks for that file when
LICENSE.GPL was added to the modularized repositories...
Task-number: QTBUG-37175
Change-Id: Iffb35adf128c3e49a7a0c12dbccd5ebe9bccf3f2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch aims to fix a memory leak that occurs when the platform
clipboard is used on Android. The QMimeData from the clipboard is
recreated each time mimeData is called
[ChangeLog][QtCore][QPA/Android] Fixed a memory leak in the clipboard
Task-number: QTBUG-36025
Change-Id: I241f586589ff256885caee5e5f737313d24d942d
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The platform font database is populated from QFontDatabase, through the
static initializeDb() function, whenever the font database determines
that the platform database has not been initialized (by checking if the
font database is empty).
There are other clients of QPlatformFontDatabase though, such as QFont,
which uses the platform font database to check for the default family.
The CoreText implementation of determining the default family relies
on data that is computed during font population, and hence does an
internal (self-triggered) populate.
To prevent repeated populates as a result of calling QFont::defaultFamily()
we guard the populate by a similar isEmpty() check as QFontDatabase does,
but to ensure that this check works in the case of an invalidated font
database, we need to propagate the font database invalidation down to
the platform font database.
Change-Id: I8d06c6f6fc5da6353c087335859eaca008c2f6a6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It was only used in QFontCache debug output,
and some engines weren't even report a name.
Change-Id: I6cec4b75f105f5a4e1405f50188bebb3a3f04e33
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use recently introduced glyphIndex() method and only recalc advances
if the glyph is present in the font. This allows to avoid restoring
the old advance when the glyph was not found in the fallback fonts.
Change-Id: I3e0aa549961767e5448816327328101cf6a78873
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
There's no point in separating them anymore, and it just makes editing
and reasoning about the QFontDatabase code harder.
Change-Id: I6bc8cb5e5daac26293e75553639e4a4d34eba3bd
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
And takes a very long time to build if it doesn't run out of memory.
Task-number: QTBUG-37237
Change-Id: I8c7fae4d2d99ad59c6d6306da2df554a05955446
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This introduces the ability to indirectly invoke all common GL1-GLES2
functions via QOpenGLFunctions. The GL1 functions are not yet resolved,
since this would not work anyway when linking to an OpenGL implementation
directly. However this may change later but that will be a completely
internal change without affecting any public APIs.
Also migrate some of the opengl examples to use QOpenGLFunctions for
everything. Once dynamic GL loading becomes available on some platforms,
these examples should continue to function without any changes since they
do not anymore invoke any OpenGL functions directly.
Task-number: QTBUG-36483
Change-Id: Ie630029651e5a4863a480aac5306edd67ee36813
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
A QBasicDrag is started from QBasicDrag::drag() through the drag manager,
which may happen from e.g a widget. The event filter needs to look at
events to more than just QWindows, otherwise the filter will miss eg.
mouse release events that are sent to QWidget and not to the QWindow
handle, and the drag goes on forever, causing invalid internal state
when a new drag is then started.
Change-Id: I5cee250e2c7552817bda0895d4c5794e12d26592
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
In the original change - cfb44c6528 - when
querying for the path of a file that did not contain a slash after the
drive indicator it would get the current path and return that as the path
that the file resided on.
However this meant that it would take the current path at that time which
may not be the actual path that was expected. So it was decided that
it should revert back to the original behavior which was to just return
the drive letter followed by the colon which would thus indicate still
that it represented whatever the current path was on that drive.
Change-Id: Ic57ae9227882a66e9a4c4d6537d7f2cae829165a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove the opengl proxy for now. Later it will either be moved into
a separate library or replaced by a QOpenGLFunctions-based approach.
This means that the -opengl dynamic configuration is not usable
for the time being. The rest of the enablers remain in place.
The convenience function QOpenGLFunctions::isES() is now moved to
QOpenGLContext and is changed to check the renderable type. This is
extremely useful since besides supporting dynamic GL it solves also
the problem of GL_ARB_ES2_compatibility (i.e. it triggers the real ES
path when creating an ES-compatible context with a desktop OpenGL
implementation).
Task-number: QTBUG-36483
Task-number: QTBUG-37172
Change-Id: I045be3fc16e9043e1528cf48e6bf0903da4fa7ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
It wasn't obvious before that many QMetaType types get converted to the
same QJsonValue type.
Change-Id: I7bb02cb10b6c8a873e291cdf1e16c6c821d51208
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The code in QSimpleDrag::startDrag() checks for the validity of the
current window before passing it on to QWindowSystemInterface::handleDrag(),
and so should QSimpleDrag::cancel().
Change-Id: I2228d86ede2a0b8379a55000a5c1d830cab44d45
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
For some reason, the [] access into NSDictionary causes
a crash on iOS 5. So instead use the API as listed in
the documentation: objectForKey.
Task-number: QTBUG-36532
Change-Id: I19fdf0f4ba1aebaf9477e2bd45040c389923605d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The WS/OS was obviously incorrect and the hack seems not to be
needed any more.
[ChangeLog][QtWidgets][Mac] Fixed incorrect appearance
of QDateEdit with calendarPopup enabled.
Task-number: QTBUG-36692
Change-Id: Ic62c9993dc13e783c00fcb56f75d92967eb5074d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When a child of a widget is spontaneously revealed due to a call to
the parent 'resize' method, the child will not receive a paint event
if it has the WA_StaticContents and WA_OpaquePaintEvent flags set.
This is caused by the backing store being pre-emptively resized by the
call to setGeometry_sys, which causes QWidgetBackingStore::sync to skip
the block which handles the static contents.
There doesn't appear to be any reason to preemptively resize the backing
store, since it is always resized as-needed during the the 'sync' method.
This change-set removes the code which preemptively resizes the backing
store.
Task-number: QTBUG-35282
Change-Id: Ie9942854ca5322dfe0f98ed8100810161576be80
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Files with same base name cause extra trouble for debuggers.
It can be avoided here.
Change-Id: I1b7a6f28ac41bacbfd2603feb8b786c31d3769e3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
MSVC 2008 is confused by TypeInStruct being a template, resulting in
\tst_qatomicinteger.cpp(189) : error C2027: use of undefined type 'QStaticAssertFailure<Test>'
with
[
Test=false
]
for int (and thus for all unsupported types). This appears to be a real
Heisenbug-nature compiler bug as it can also be fixed by adding
qDebug() << Q_ALIGNOF(TypeInStruct<T>)
before the static assert.
Task-number: QTBUG-37195
Change-Id: Ib2b60f3c1ffeb0b8bdeb1fb0c659655ce4ab10d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Hide the forwarder function from QDoc.
Change-Id: I2ea5cce0e68a5803cd4a24cefbbd50fc6c5ffb94
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
