- No need to use QSignalMapper here, replace its uses with lambdas.
- Replace index 'for' loop with iterator loop, to simplify the code.
Change-Id: Ide3d2db99a074c0233eb5c2fd7a9b217d804973f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Leftover from the migration to QColor as color clear value.
Change-Id: Ibf49d65234a1e14d53035b46249753a5929ca22b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The Quick render loops do SkipPresent occasionally, and it all seemed
to work with the threaded one because we lack an autorelease pool on
the SG render thread. (to be corrected separately) The basic one ended
up crashing sometimes, however. Holding on to the drawable is incorrect.
Fixes: QTBUG-76953
Change-Id: I0d0ec6d09aa209d2c848d7a9dbd9b15916fe23ab
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simplistic console application with one test for each of the two
classes. Simply tests that we receive the signal when the connection
is disrupted in some way.
This patch also exports the classes for tests/developer builds
so that we can actually link with them.
Change-Id: I8066312274350984110c3f3ad3e94854adca7c2a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Have feature flags as appropriate. OpenGL is causing a mess here
but let's support what we can since some of this will become relevant
in more sophisticated mesh drawing cases with 3D in particular.
Change-Id: Idfa7b4642ec87147978e03d78d6233efbd151491
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Draws 1024 cubes at random x,y positions with varying color with
a single instanced draw call.
Change-Id: I8737503acf23866ad4734b1d88753415a3b93445
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...but this will vary between backends, or in some cases
even between implementations of the same API.
Point size is settable only via the vertex shader (gl_PointSize).
It is silently ignored with D3D and HLSL.
Line widths other than 1 are supported only on OpenGL and Vulkan.
(but this is in fact deprecated with GL and optional with Vulkan)
Add QRhi::Feature values for both.
The line width is now settable on QRhiGraphicsPipeline. It is not a
dynamic state since the static, per-pipeline width is good enough for
most cases. (and the feature is not supported on half of the backends
anyways so it will get limited use in practice).
Change-Id: I6d3a32269527c452b794b2cb8b0f03101eab40b2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix most clang warnings about override, nullptr, range-based for loops.
Change-Id: Id47e57adb63a38e2f397a31511b788a2432c97cf
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
D3D11 and GL (4.3+, ES 3.1+) will come separately at a
later time.
Change-Id: If30f2f3d062fa27e57e9912674669225b82a7b93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I0bb1d1409cb0c8f38b7582bb5ce6bbc2b047b6fc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The class used the default debug operator for QObject, which outputs
the object's address. This makes it hard to compare the log output.
Make the existing QObject formatting helper from the EventFilter
publicly usable by providing a helper with a stream operator.
Change-Id: Ifab83e23cc792a5efe231fd9ae84e0439ab0d609
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Comes with backends for Vulkan, Metal, Direct3D 11.1, and OpenGL (ES).
All APIs are private for now.
Shader conditioning (i.e. generating a QRhiShader in memory or on disk
from some shader source code) is done via the tools and APIs provided
by qt-labs/qtshadertools.
The OpenGL support follows the cross-platform tradition of requiring
ES 2.0 only, while optionally using some (ES) 3.x features. It can
operate in core profile contexts as well.
Task-number: QTBUG-70287
Change-Id: I246f2e36d562e404012c05db2aa72487108aa7cc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Set AA_UseHighDpiPixmaps.
Task-number: QTBUG-52622
Change-Id: Ic4373a9c94952f50bc1ad36bcc0dec850efc124a
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the toolbar was moved from one position to another it could end up
increasing the size of the saveState data due to extra lines. This
removes any needless ones that should not be included.
Change-Id: I1c5d094ae1405d6a82db5fcdc3cd081904706837
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Fix QOverload<void>::of(), causing
../../../../include/QtCore/../../src/corelib/global/qglobal.h: In instantiation of ‘struct QConstOverload<void>’:
Q_DECL_CONSTEXPR auto operator()(R (T::*ptr)(Args...) const) const Q_DECL_NOTHROW -> decltype(ptr)
and add a missing .pro-file.
Change-Id: I19597adc33f2323a9f7dea9ee5ce94546f0e8f12
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fix:
gestures.cpp:46:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
gestures.cpp:47:5: note: here
gestures.cpp:48:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
gestures.cpp:52:5: note: here
main.cpp: In function 'QByteArray windowsVersionToString(QSysInfo::WinVersion)':
main.cpp:40:12: warning: enumeration value 'WV_CE' not handled in switch [-Wswitch]
...
main.cpp: In function 'QByteArray macVersionToString(QSysInfo::MacVersion)':
main.cpp:68:12: warning: enumeration value 'MV_10_12' not handled in switch [-Wswitch]
...
widget.cpp: In member function 'CustomItem* Widget::checkedItem() const':
widget.cpp:238:12: warning: 'item' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I434784e86d127e56b92663cb45eba7d60d8f8eaf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The following enumerations were obsolete for a log time but not marked
as deprecated:
- WA_NoBackground
- WA_MacNoClickThrough
- WA_MacBrushedMetal
- WA_MacMetalStyle
- WA_MSWindowsUseDirect3D
- WA_MacFrameworkScaled
- AA_MSWindowsUseDirect3DByDefault
- AA_X11InitThreads
- ImMicroFocus
mark them as deprecated and remove the usage inside QtBase so they can
be removed with Qt6
Change-Id: Ia087a7e1d0ff1945286895be6425a6cceaa483fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A QTextDocument can now be written out in Markdown format.
- Add the QTextMarkdownWriter as a private class for now
- Add QTextDocument::toMarkdown()
- QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown")
is called or if the file suffix is .md or .mkd
- Add QTextEdit::toMarkdown() and the markdown property
[ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now
a supported format for reading into and writing from QTextDocument.
Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Some of the spdy/3 tests don't pass anymore because those services
no longer support spdy/3. Solve this by updating it to HTTP/2 (h2).
Change-Id: Ib3ef6109b75f4298fed15c1c7922deca35459df9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
The grayscale font-smoothing doesn't expect to be linearly blended,
as first assumed.
Amended nativetext manual test to better diagnose the native Core
Text behavior. Non-linear blending will result in the magenta
text having a dark outline against the green background.
Change-Id: I24a5f04eb1bd66fb98d621078d80ee9b80800827
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The Qt and CoreText positioning is now in sync.
Change-Id: I0cbb5b150d1bef732674b8d42c64a040773a62ab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On Linux, the printer panel impacts the application startup time,which
can be annoying when testing other dialogs.
Change-Id: Id13446047cf50765951a6bb5182ee50cae983457
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add an option that moves windows back to the top left corner,
which is useful when some window (of some application saving its
position) is lost after changing the monitor setup.
Change-Id: If358b1ed7f481f2bb98e375e88f11049f97a4a91
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It takes multiple source models and concatenates their rows into a single model.
With full unit tests.
[ChangeLog][QtCore] New class QConcatenateTablesProxyModel, to
concatenate the rows from multiple source models.
Change-Id: Iaf4f325473adef106f423677fdc5ee0e35e87d35
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
When a screen is positioned to be above another, then the toolbutton
menu could be shown on the wrong screen if it was deemed to not fit
below the button the same screen. This ensures that it shows it on the
right screen when there is sufficient space to do so.
Change-Id: Ia626b28f74c1931904ff5b30cca17e63914d3c79
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If a display is placed above a primary screen which has the top left set
to be 0x0, then menus that are defaulting to go up can still be
displayed on that screen when the menubar is placed on the bottom of it.
This ensures that this is the case and also adds a manual test to aid
verification of it in the future.
Change-Id: Ib657ccdc1aabfe1586c72585c087ac80a6c632c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since we moved the menu items validation and target/action to
QNSView (thus relying on the responder chain), we need to take
care of case when the applications that doesn't have any window
open. By adding similar methods to QCocoaApplicationDelegate,
the last responder, we ensure the menu items will be validated
and will trigger properly. This is particularly necessary for
dock menu items, which live separately from any top-level widget.
Dock menu added to Menurama which won't quit when its last window
is closed. This way we can test that dock menu items will trigger
in the absence of any window.
Change-Id: I56d864eb9da1f8dd5adb2a3b6c3dd5304c723117
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- Add a display label showing the screen parameters.
- Add a menu option to launch secondary windows and restructure
the code accordingly
Change-Id: I2bdb76da0b0a00e62db41e674aa93cef9598fe67
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Introduce C++11, nullptr, for, port to Qt 5 connection syntax.
Change-Id: I2d233ccd68bad533af8d4674d91236b2c049e997
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Implement more consistent behavior for drawTiledPixmap(),
which should produce the same visual tiling pattern
independent of display devicePixelRatio
Consider the following pixmaps and draw calls:
QPixmap px32; // 32x32
QPixmap px64; // 64x64
drawTiledPixmap(QRect(0, 0, 128, 128), px32);
drawTiledPixmap(QRect(0, 0, 128, 128), px64);
On 1x displays this will produce 4x4 and 2x2 tiles,
respectively.
On 2x displays this would previously produce a different
tiling pattern, where the paint engine would tile in
the device pixel coordinate system. Change this to
tile in the device independent coordinate system,
producing the same visual tiling pattern as the 1x case.
It is possible to produce a 4x4 tiling pattern with
high-resolution output from the 64x64 pixmap by setting
the devicePixelRatio:
QPixmap px64;
px64.setDevicePixelRatio(2);
drawTiledPixmap(QRect(0, 0, 128, 128), px64);
This change adds an inverse scale to the image filler
transform that accounts for the pixmap devicePixelRatio.
[ChangeLog][QtGui] QPainter::drawTiledPixmap() now
tiles in the device independent coordinate system.
Change-Id: I4918d274192967f222f181b374571c7c597dcd76
Reviewed-by: Jonathan Courtois <jonathan.courtois@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: 石博文 <sbw@sbw.so>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Without any content it was hard to see the window. Put some lipstick on it.
Change-Id: I0fefffb0a4deba7ac91e67a6153a9a27308fe493
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The latter would allow one final resize that would immediately
jump to 300x300.
Change-Id: I566e5e9dc1fb07f748f528f002166a8438344173
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Move ivars into @implementation
- Use instancetype where applicable
- Use dot notation for property access
- Use subscript operator for dictionaries and arrays
- Format selectors consistently
- Use proper style for init methods
- Use generics instead of void pointers where possible
- Use "range for" loops instead of indexing
- Replace or replace IBAction/IBOutlet with void
Change-Id: I1667812a51d4dfe44ae80fe337cb1f4bc9699d92
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.
Also add a manual test for visually checking the ellipse diameters on
various devices.
Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add information about mouse tracking/grabbing for widgets
and window where applicable.
Change-Id: Idfe8bef6d146ff06dfe95c0bad5e29e7a4ea7adc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Refactor the page displaying the standard pixmaps of a style:
- Use a QGroupBox
- Sort items by enumeration name
Add a page displaying the standard icons along with the list of
sizes.
This allows for conveniently checking which resolutions are available.
Change-Id: I2d7f655456fc3e7013c2582ad520b6ac582951e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Extract a helper function to determine the window title from QXcbConnection
and add an invokable function to the native interface that dumps the window
tree similar to existing functionality on Windows.
Change-Id: I5544d69ea2b801eb16d3b5b8d64021b3e567b0d8
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can use the D-Bus / systemd machine-id file (which is a UUID without
the dashes) on systems with D-Bus. On Windows, there's a value in the
registry that is filled when Windows is installed, like on Linux. For
BSD systems, the kernel has a UUID we can use too, so extract that.
Task-number: QTBUG-63425
Change-Id: I27eaacb532114dd188c4ffff13d32f2e3c1d74bb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
We have found that there are three important operations
when it comes to menu creation and putting it up in the
native menubar:
* Adding the action to its parent menu
* Setting the submenu as the action's menu
* Populating the actual submenu
This application tests all possible permutations for these
three operations, starting from the menubar and down two
more menu levels.
Two command-line options allow, first, to create a late
menubar that will replace the original menubar from the main
window form (--new-menubar) with, second, the option of
creating it parentless (--no-parent) before setting it as
the new main window menubar.
While mostly interesting for platforms supporting QPA menus
and menubars, this could be useful as a trivial check for
QMenu and QMenuBar in a pure QWidget environment.
As of today, the application shows at least three issues on
macOS which will be fixed in upcoming patches.
Change-Id: Id3c1e0f346c6fe27ab4656ff045b88a0a8623740
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We need to ensure that simultaneous touch and tablet input is possible.
Change-Id: I0c0d06e382b6b89e11ed06c1e4ad0db63b3b7c82
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Before this patch a very accurate drop position below
or above an index was needed. Therefore it was not that
easy to do.
This patch increases the above/below area to be about
18% of the item (still leaving the most space for the item).
An average user will likely be 2-3x faster with dropping
below or above (while not losing much when dropping on items).
[ChangeLog][QtWidgets][ItemViews] Made it easier to
drop above and below items.
Change-Id: I47f0f80c76878c17ebf3f93d0a0cc82755971c2a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Proximit events are sent to the QGuiApplication, catch them via
event filter.
Change-Id: I7f896e7d9f5c90347b9e3c708feb69abd1c5fc95
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Add view to contentView, to allow checking parent view interaction
- Render via requestUpdate instead of manual timer
- Add two windows to check subview interaction
Change-Id: Ib028e62f585d45e42c0429e69ea6f45c8a90fe54
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Change c12072c685 fixed a problem
where tab labels would overlap with the icons if the tab became
too small to contain the text. But it did not properly account
for the full area occupied by the icon, because the horizontal
padding is hardcoded to 4 in the mac style, whereas in the
common style (where the icon is drawn) it uses the pixel metric
for this.
In addition, the change only allocated space on the left side,
causing the label to no longer be centered.
Task-number: QTBUG-61235
Change-Id: Ieec4f7044584361f92045addbc8bbd81bd5c9fc7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Calling -[NSMenu update] every time we add a new item can result in
a quadratic behavior since the function itself will iterate over all
the items in the menu. We solve this by using a 0-timer which will
trigger the call to update the next time the event loop spins.
Menurama manual test updated.
Change-Id: Ic155d364515cc93eb81b1c8085c8e44c93799954
Task-number: QTBUG-62396
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
It was working on Linux because _GNU_SOURCE gets us POSIX.1-2008
compatibility, but not on macOS or the BSDs. There, we were still stuck
to full second precision.
This commit uses the template trick introduced by the futimes code
(which itself was inspired by commit 2fb42eb4af
in QtNetwork). Also note how it adds support for birth time, if the
system's stat struct has that information.
Tested to work on MacOS and FreeBSD. The manual filetest produces:
Name: .
Path: . (/usr/home/tjmaciei/src/qt/qt5)
Size: 1536 Type: Directory
Attrs: readable writable executable hidden nativepath
Mode: drwxr-xr-x
Owner: tjmaciei (1001) Group: tjmaciei (1001)
Access: 2017-07-13T20:03:47.916
Birth: 2017-07-13T20:03:47.916
Change: 2017-07-13T20:04:41.648
Modified: 2017-07-13T20:04:41.648
Linux will require support for statx(2).
Change-Id: I8d96dea9955d4c749b99fffd14cd97d7a8c6d45d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit 32a94e54 changed the API of the QPS engine (PaintCommands
class). Update the usage accordingly.
Change-Id: Ide57609e636dad0aa434d1049b600b72f731bc30
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Covers non-document mode, tab icon, and adds a more
useable interface. Some parts are still missing, like
tab orientation and long tab titles.
Task-number: QTBUG-61092
Change-Id: Idbda84f513e3ff7f87fa04ae4476b11bd8bb6bf2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fix regression introduced by 175f33ed8. 'expanding' property set to true
was ignored when QStyle::styleHint() returned Qt::AlignRight for
SH_TabBar_Alignment.
When we calculate tabs geometry, we put an empty tab at the front and
back and set its expansive attribute depending on tab alignment AND
'expanding' property.
Task-number: QTBUG-61480
Change-Id: I6a1827ae8a3f2c6bee5124c18c7f2b1c0a7862f3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Change-Id: Ia0eddcb385207ada8c3df59d49ff1de27a2aeb71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In FileDialogPanel::options(), QFileDialog::DontUseCustomDirectoryIcons
was set when the "Don't use custom directory icons" box wasn't checked.
Change-Id: I6e9d9b41cf91f4abcc98c02bed44675908a8391d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We have been noticing several menu popup sizing issues
in the presence of multiple, heterogenous displays.
Most remarkably, we'd often pick the primary display's
geometry when computing the menu's size hint. This results
in usability issues if the primary display is smaller than
the display onto which the menu popup is being displayed.
This manual test covers menu bar, context and push button
menus. Torn-off menus are also enabled. We turn off the use
of native menu bars to cover a few more cases.
Change-Id: I29658ebdc56e41aa1bf99d06d96aed6bfb5461b3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
For Android, Windows and xcb. Verified on Win10 with NVIDIA, Win10
with AMD, Android with Tegra K1, Android aarch64 with Tegra X1, and
Linux aarch64 with Tegra X1 (Jetson TX1, L4T).
Introduce QPA-based Vulkan library loader, core function resolver, and
instance creation support. In addition to creating a new VkInstance,
adopting an existing one from an external engine is supported as well.
The WSI specifics are hidden in the platform plugins. Vulkan-capable
windows use the new surface type VulkanSurface and are associated with
a QVulkanInstance.
On Windows VULKAN_SDK is picked up automatically so finding vulkan.h
needs no additional manual steps once the LunarG SDK is installed.
[ChangeLog][QtGui] Added support for rendering to QWindow via the Vulkan
graphics API.
Task-number: QTBUG-55981
Change-Id: I50fa92d313fa440e0cc73939c6d7510ca317fbc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The controls need to reflect the facts that e.g. maximized and fullscreen
can both be set at the same time, the same way a window can be minimized
and fullscreen.
Change-Id: I7f3e354a5efaefb9f51e6b1f24fa35980fe35899
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes operations like minimizing a window happen "behind the scenes"
because the window is hidden during the state change.
Change-Id: I01a00661e57f2dcfa6aef78ee0cfa36fbed1bb03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Have a widget-based application that uses qTriangulate for fills
and QTriangulatingStroker (and optionally the dash stroke processor)
for strokes.
The resulting triangle (strip) set is visualized on a simple QPainter
canvas, offering the ability to zoom in and examine how the triangulator
behaves on a number of example shapes. It is also possible to step through
and only have the first N set of triangles drawn.
Change-Id: I3a27d86d4ea13a63dd4be0fe81dd4b5ed6e4fa75
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix warning about unused variable printer in auto-test and redirects
output to qInfo() as intended.
Amends change a26435d65c.
Change-Id: Ia72a93267a54b9c4f9ef37fa058b95ef586ecc75
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change the main window to contain a QTabWidget and add a log widget
logging relevant events on the top level widgets for testing changes.
In the preview window, add new window flags of Qt 5 and output
geometry, margins and window state in addition.
Change-Id: Icec366223b6c163d58a69034687f3d9323a91533
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The existing cursor logic had a couple of issues:
- It made the faulty assumption that we could not use
the NSWindow invalidateCursorRectsForView API for
child NSViews.
- It used NSWindow invalidateCursorRectsForView and
NSView resetCursorRects. This API has been replaced
by the more general NSTrackingArea API.
- It did not implement falling back to the parent
window cursor if the current window has no cursor
set.
Document that QWindow cursors work the same way as
QWidget cursors in that a QWindow with no set cursor
will fall back to the parent window cursor.
Change the cocoa platform code to use NSTrackingArea
exclusively and implement NSView cursorUpdate which
sets the cursor. Handle immediate change on QWindow::
setCursor() manually.
Add QWindow::effectiveWindowCursor() and
applyEffectiveWindowCursor() which finds the correct
window cursor.
Add a manual test for the child window, child widget,
and QWidget::createWindowChild cases.
Task-number: QTBUG-33479
Task-number: QTBUG-52023
Change-Id: I0370e11bbadb2da95e8632e61be6228ec2cd5e9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This leaves a clearer separation between the foreign-window and non-foreign
window use-cases, where a single QCococaWindow can only be in one mode,
which is determined in the constructor and doesn't change after that.
There are no source or binary compatibility guarantees for the QPA classes,
meaning the helper function in QPlatformNativeInterface can be removed.
Change-Id: I3232aedca1d98c49a8f54e16750832187f9dc69a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QSysInfo::WinVersion, QSysInfo::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::MacVersion,
QSysInfo::MacintoshVersion, and QSysInfo::macVersion() are now
deprecated.
QOperatingSystemVersion exists as a more flexible replacement.
Change-Id: Ib97d1bfb260f2595ba3c06ff8fd251c5de41cedc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to detect cases where the requested vsync combination was
not possible to fulfill.
Change-Id: Ie8f3665129f7a1ab7fcefb94b2298d54520b753a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The FPS is now calculated and output on the command line in a single
place. The animated fps counter has been replaced with a vertical line
which should make it easier to observe tearing issues when vsync is
disabled.
Change-Id: Id356fc1958c048d85aba48edfed59124454038d4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The animated FPS counter should be enough to observe smooth animations,
so we use the color of the window to visualize frame latency.
Change-Id: I1171a1c4bdc261ca8655771290c6735357821781
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QStorageInfo] Added QStorageInfo::subvolume(), which
returns the name of the subvolume of a volume that was mounted, if one
was detected. This is currently implemented only for btrfs on Linux.
Change-Id: Ib57b52598e2f452985e9fffd1459f3145d733ce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Use the correct method of QMetaEnum to convert enum values to names.
QMetaEnum::valueToKey() should be used, because it takes an enum value
as an argument, while QMetaEnum::key() takes an index of the enum value.
Change-Id: Ie895fcc935e8835e3d9c416ca34be8bfe82fd74e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Changes the --extrawindows option to --numwindows with a default of 3,
and layouts all windows in rows and columns so that they are all
exposed at startup.
Change-Id: I5e8d63a14b778bcddc2fee3bf7e78d6664532b5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Change QOpenGLTextureBlitter to be a public API, as it was originally intended.
There are now significant external uses outside qtbase (C++ compositor examples
in QtWayland), and the API is considered proven enough.
[ChangeLog][QtGui] QOpenGLTextureBlitter, a utility class to draw textured quads,
has been made public.
Change-Id: If7a2c94e1494195e2aa375d214932fa7b4c78321
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add a test for embedding Qt windows into foreign windows.
Complements the existing "foreignwindows" test (which embeds
foreign windows into Qt).
The test has a simple UI based on QRasterWindow allowing
for checking events and geometries.
Task-number: QTBUG-41186
Change-Id: Ie62a3e250ca666e2fa5c2e3ef37ef0654829397c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
