There should be no blank lines in \value content, otherwise qdoc
ends the list and starts a new one.
Change-Id: Idddc7992317894487445aea36397136df40b9691
Reviewed-by: Martin Smith <martin.smith@qt.io>
Change 333f641622 modified
QGuiApplication::topLevelWindows() to no longer include embedded windows.
This causes the blocked handling in Active Qt to no longer be triggered.
Fix this by iterating over the list using the same condition as before,
avoiding the construction of a temporary list as a side effect.
Task-number: QTBUG-18099
Change-Id: I06a1a4e324fea9f543ceb5274bb064734f8d56af
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
waitForWrite can emit a signal outside QLocalSocket and pipeWriter
could be deleted there.
Change-Id: Ic35ec6455bd05402fd38fb3e1b219aa4534a0ff6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QOpenGLContext pointer was dereferenced before checking if it valid.
Coverity-Id: 11370
Change-Id: I87d83a87d88ad7c055f3ed32096bfda036224ca9
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Without this, building a project with qmake -Wall will
always produce the following warning:
mkspecs/features/resources.prf:22: Unescaped backslashes are deprecated
Change-Id: I0aeedbf470958ab458651a263e3f804ea2d1a0f0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The following is safe:
QOpenGLVertexArrayObject *vao = ...
vao->create();
switch the current context
delete vao;
because the QOpenGLVAO dtor recognizes that the wrong context
is current, and will temporarily restore the VAO's associated
one in order to safely destroy the vao object.
However, the following has been problematic:
vao.create();
switch the current context
vao.destroy();
simply because all the logic was in the dtor and destroy()
blindly deleted the vao object in whatever context was current.
This can lead to releasing a completely unrelated vao object
that happens to have the same name in another context.
The expectation is for context-dependent wrappers is that a
ctor-create-dtor-ctor-create-dtor-... sequence is equivalent to
create-destroy-create-destroy-..., so move the safe cleanup logic
from the dtor to destroy().
Change-Id: Ie3bddbf4bfeb8629948c4783cc88422c9df03e65
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Use QTRY_COMPARE with a timeout to check for the stopped state
unless BAD_TIMER_RESOLUTION is defined.
This speeds up the test by 1s and prints diagnostic information
should an interval be too short (as seems to be the case on macOS,
currently).
Change-Id: I8f884cd66ad33314124d3130d9f49606e6dfe9f3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The regression was introduced during refactoring by 820e69d6c and the
initial change that added this logic is adc3ef97d.
This condition had become redundant and wrong after refactoring because
m_sendUpAsRightButton flag is set in the proper way in
QNSView::mouseDown() which later calls QNSView::handleMouseEvent()
anyway.
Task-number: QTBUG-58219
Change-Id: I1951cf4067af6f0c1837c1c15b8a09dfe7939493
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Pavol Markovic
QQuickWidget did not receive mouse release events after drag and drop
because the logic was so:
1) QWidgetWindow::handleMouseEvent() was called on press and
qt_button_down was set to the corresponding QQuickWidget;
2) After drag started, qt_button_down was set to 0 in
QApplicationPrivate::notifyDragStarted();
3) On mouse release QWidgetWindow::handleMouseEvent() was called again,
but because qt_button_down was 0
QApplicationPrivate::pickMouseReceiver() returned 0 and as a result
QWidgetWindow ignored the event and did not propagate it to QQuickWidget
for further processing.
The step 2 is a widgets-specific fix for QTBUG-26145 that does not work
for QQuickWidget (QtQuick has its own focus system).
Note that because Widgets and QtQuick do not share the sources, there is
no possibility to cast the pointer to check whether qt_button_down is
a QQuickWidget or some other QWidget-derived class object, so we have to
use QObject::inherits() method to check that.
Task-number: QTBUG-56713
Change-Id: I599b843e903c64329e6178752e0dc49f674bb890
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
don't ignore detected features for host tools when we're not actually
cross-building.
Change-Id: Id62a3c1c6b7ae422b14efb4fbea0892b05a047cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com>
This was missed in dd9ec1564, leading to errors for example when building
with separate_debug_info.
Change-Id: Ibeb8020abe32690bcc691c1ca139508775c91db2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
prelink was not supported at all for ar.
postlink was done for most cases, but missing in one particular ar
invocation.
Task-number: QTBUG-57276
Change-Id: Ic72c42a9502c97d7111b3f3941b387024d46a27d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there isn't a point to determining the values separately if they are
actually the same things.
Change-Id: I74cd2bf39e96d559630709559602c234c38b0c47
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
note that in principle this leaves room for a race condition, as the
first project to determine the host config is not going to be the
top-level one.
in qtbase and qtdeclarative, this is naturally serialized via the common
bootstrapped libraries (bootstrap resp. qmldevtools). activeqt, qt3d,
qtscxml, and qtwayland all build only one bootstrapped tool each.
qtwebengine makes a fake host build to create files for gyp/gn; the
convert_dict tool is declared a host tool, but isn't actually built when
x-building anyway, and even if, it's serialized on the former. qttools
needs explicit serialization, though. no other host builds exist within
qt as of now.
Task-number: QTBUG-58126
Change-Id: I81a02a2d98f2bfe5d6aaa51119d5e7919549f119
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in cross-builds, toolchain.prf was loaded before CROSS_COMPILE was set
up, leading to caching of possibly nonsensical values.
this change also necessitated that msvc-version.conf is loaded only when
toolchain.prf is, which is best done by loading the former from within
the latter. that seems quite appropriate in the first place.
Change-Id: I62577e827a75e335e03df016bd1aa1932643fd6c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Carbon port has been removed since 5.0, so there's
only one framework against which we can build Qt.
Change-Id: I38ce410f50cd4eda7abcc50ac4c4c7a23b3e1f45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
instead of forcing an early load and discarding its contents again
before they could cause harm, trick qmake into not loading it at all.
Change-Id: I672ca9de362b1f23bf5cfea007053570c8534fc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
move the code before the linking of qt modules - dependency resolution
would re-order them anyway (or static linking would fail).
on the way, fix up the coding style and rename some variables.
the code to de-duplicate/normalize QTPLUGIN is pulled ahead, which means
that the automatic plugin importing wouldn't make a mess of it any more.
but this is mostly legacy anyway.
Change-Id: Id135470d027f5d84b7f30531425a65efa230f278
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it has a dependency on zlib, which needs to be explicitly linked when
linking statically.
Task-number: QTBUG-56163
Change-Id: I4564844e8a35686db48c429b259e78558d312819
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
freetype has no dependency on gui, so it needs to pull in gui's
configuration manually, as that's where the system libpng is found.
Task-number: QTBUG-58038
Change-Id: I881495f7d2a8f7c1a45d7d4c9e7698ff1d30f2a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Joni Poikelin <joni.poikelin@qt.io>
that makes the log file mostly self-contained.
for code re-use, the qtSystemQuote() function was factored out.
Change-Id: Ie3469518ba384131b69f5f15c577240e2674d507
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the options may need to take effect before the regular test processing
commences (which is actually going to be the case in the next commit).
the indirection via the callback only obfuscated the code anyway.
Change-Id: I5307b0be15cf4cc2c2db391ce5b5a93f81076b5c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Bring back the call to InvalidateRect() removed by change
6086c81e4d since it seems that GL Software rendering
requires it (also for single buffer mode).
Task-number: QTBUG-58178
Change-Id: I197a1b3c3906c4afa43943db30dbc07dfb656cc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We enforce the check of saving the icon when the indicator
process name isn't available (as we might be running in a
confined world), but we're running in Unity.
Change-Id: I80d3be1a8c6eba8c391364260746e78cf89a5b98
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The regression was introduced by 593ab63860 which fixed another bug
related to window modality. To determine whether the window needs to be
(made key and ordered front) or just (ordered front), instead of calling
currentModalSession() which might change internal state of event
dispatcher we just check if cocoaModalSessionStack is empty or not.
Task-number: QTBUG-57991
Task-number: QTBUG-56166
Change-Id: I6c4f92860d8c93decd44e572af1690ed7be6f1f0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When a platform menu bar is used, the QMenuBar is hidden, so shortcuts
for QActions attached only to it do not work.
Extend the macOS-specific code to treat such menubars as visible to
other platforms, to make the shortcuts work.
The exception is made for internal QMenuBar shortcuts, which are
forwarded to the platform menu. A follow-up change will add support
for this to QDBusPlatformMenu. The updateGeometries() method is called
for platform menu bars too to make sure the internal shortcuts are
registered even if the global menu is in use.
Add two cases to the tst_QMenuBar::activatedCount() test to test
both native and non-native menu bars when possible (it now passes with
native menu bars too).
Change-Id: I2d7128512719ac199cd3f8f7ba28333d04d84ed4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This way the Qt accelerator shortcuts (i.e. Alt+F for the File menu)
will cause the matching menu to be opened on the server side.
Change-Id: I02a5b3c20c6eae130d0f133b33c9e247cff38d44
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The hint is not appropriate for Windows 10 tablet mode as it affects
only main windows. Dialogs should still show up in normal size.
Partially reverts change d377f14fd5.
Task-number: QTBUG-58227
Change-Id: If9cf4990eb40913904cd97e17a7622bc6cbe84ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
QPlatformFontDatabase::resolveFontFamilyAlias returns the input
unchanged if the font-name is not found. This means we never register
the system default font when it is only a virtual font name.
Task-number: QTBUG-58225
Change-Id: Ib4f80bb758aa66a163d223573bfe624bb3c134ab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QRect::setX/setY will change both position and size. In this case,
the width and/or height of the input rectangle could end up
negative. The correct functions to use are moveLeft/moveTop which
will preserve the size when changing the position.
Task-number: QTBUG-58179
Change-Id: I71a2e38958754dc53e062ad1c780e2337f72ec32
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Previously, the code grabbed the client rectangle of GetDesktopWindow(),
which is always the primary screen. Fix by using the geometry of
the QPlatformScreen. In addition, subtract x, y from the effective
size when sizes < 0 were passed in as does XCB.
Task-number: QTBUG-58110
Change-Id: I6ed439d2e1da8affd0a1475717d5570017fb1f2b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The size of flowPositions is larger by one than the number
of rows in the model so the last correct row number is
flowPositions.count()-2, not flowPositions.count()-1.
Change-Id: Idf8bbd155151d553947d5d299dd01ffaff0c95fa
Task-number: QTBUG-47694
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: David Faure <david.faure@kdab.com>
Check on QMAKE_TARGET_PRODUCT/QMAKE_TARGET_DESCRIPTION before assigning
values. This enables providing other values by for example the
Qt tool applications.
Change-Id: I62270ca38b7a9110185f6163b280409dbaf395f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When triggering a combination of keys which is causing a dead key then
it will send Key_unknown which is not a valid key to be used in a
shortcut so it should just skip past it as if it were a modifier key.
Task-number: QTBUG-57932
Change-Id: I16e004b84f3aa854f8f8f2bbdf86beb6d764de48
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To work around qmake deficiencies src/angle/src/compiler/translator.pro
contains a no-op extra compiler that "creates" glslang_tab.cpp and adds
a dependency to glslang_tab.h.
However, both files are created in one bison call, and for some reason
the .cpp file is created before the .h file. Then the dependency
glslang_tab.cpp -> glslang_tab.h results in recompiling glslang_tab.cpp
on every incremental build.
Ensure that glslang_tab.cpp is newer than glslang_tab.h.
Change-Id: I6f59e213c84af85c59c02d90ac220bd347faddd1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
