This is in preparation to adding CBOR support. We don't need yet another
dir for CBOR and placing it in src/corelib/json is just wrong.
Change-Id: I9741f017961b410c910dfffd14ffb9d870340fa6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-53141
Change-Id: I73d8787241291ae6230861a89b38e91d900fede0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-46857
Change-Id: Ie323798df09cdbebc67eb617a7e0ec4c66cb2357
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QAbstractItemModel::beginRemoveRows() must not take a negative value
for first or last. It will assert so we should make sure the examples
are correct.
The assertion was added in 00c09e752f
Change-Id: I539175c0597ed6f0ae76b7493fd3dca40638714e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Martin Smith <martin.smith@qt.io>
QTreeView makes columns movable except for the first one
(since Qt 5.0, see commit e0fc088c0c). This is indeed best
for actual trees, but not when using QTreeView as a flat
multi-column list (with no "root decoration"). Then it should
be possible to move the first column.
[ChangeLog][QtWidgets][QHeaderView] Flat treeviews can now allow
the user to move the first column (like in Qt 4.x) using the new
method QHeaderView::setFirstSectionMovable().
Change-Id: I6b5025e40850bf5c4c373124ee81f657f3f09d29
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
In MainWindow ctor some member values were allocated without a parent
and not cleaned up in dtor. Fixed it by give them a valid parent so they
get automatically cleaned up. Also m_treeView was initialized twice.
Task-number: QTBUG-61862
Change-Id: I5590b87bb517c55db6eb58e700a5d419c0acdba2
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
It hasn't been necessary for a long time now to write the recursive
file-find function manually. It has just been an obscurely documented
feature of QDirIterator for far too long.
Demonstrate the new QLocale::formattedDataSize() function.
Also sync up the qdoc description of this example with the recent changes.
Change-Id: I9c2bb15bb5ec353d38181b160f0be198774cbea2
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It's the right thing to do, as we're in 2017, not 1997. Also, this takes
care to indicate that QAbstractSocket::MulticastTtlOption makes sense
mostly for IPv4, even though it's implemented for both families. In
IPv4, it's used to indicatae the scope, whereas in IPv6 it's stored in
bits 12-15 of the address.
Task-number: QTBUG-46046
Change-Id: I9741f017961b410c910dfffd14ffaabe0a2024d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The Main Window example generates icons programmatically for its
toolbars. However, these icons are shown with low resolution in a
high-DPI display because the application is not enabling high-DPI
pixmap support.
Change-Id: Id763b707105d02f63162fff2efeb607eb5b59ed1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- Edited gettingstartedqt.qdoc
- update .pro files
- replaced snippet statements by \quotefromfile
- removed second version of notepad.h and notepad.cpp
that were made only for quoting snippets
(\quotefromfile reads from the program code)
- show current filename in header of window
- added checking routine on filename in Save method
Task-number: QTBUG-63984
Change-Id: I5298d761763a4dfeb705a1d9b77354be853ada88
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also drops a few instances where the dependency was purely runtime,
especially for examples.
Change-Id: I2a0476f79928143596bdb3b8f01193af90574ae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I1972da2ead51274771ff24b4c506c2b581ee6abe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
There are plenty of other examples showing how to use QStateMachine
Task-number: QTBUG-60635
Change-Id: I82300b2a0f4e7733f08579a2aa9b548cb7d87efa
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I updated signals and slots and for each loops to the new syntax and
replaced most free functions with std::function.
Task-number: QTBUG-60641
Change-Id: I7693f81f71c7f53fcbe83189a0de2fb76ddf99a8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They are not updated after switching tabs. Thus they can be enabled even
when no entry is selected: select an entry on the current tab and then
switch to an empty tab.
Emit AddressWidget::selectionChanged() signal after changing the current tab
to update these actions.
Change-Id: I00da15ed6c3d3839210ae3ffbe1436e234695522
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce nullptr and replace foreach with new C++11 range based for
loops. Minor fixups of signals, file dialog usage.
Apply the same changes to the ItemViews/puzzle example since it
shares parts of the code with DragAndDrop/puzzle. Make some
changes to both examples to that the diff of the two becomes
small for easier comparison.
Task-number: QTBUG-60635
Change-Id: I8af824229ebac24d6ec151eae92176d227695490
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Introduce Contact struct to store contact data and use it
instead of QPair<QString, QString>. Proper naming really
clarifies the code.
Task-number: QTBUG-60635
Change-Id: Ibfb421dfc854accc382212b0da46e7aafc0d528a
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Upgrading to a recent Vulkan SDK (e.g. 1.0.61) leads to getting
a few previously unseen warnings from the validation layers.
Fix these:
vkDebug: ParameterValidation: 8: vkCreateSampler(): The
samplerAnisotropy feature was not enabled at device-creation
time, so the maxAnisotropy member of the VkSamplerCreateInfo
structure must be 1.0 but is 0.000000.
vkDebug: DS: 461375808: vkCmdPipelineBarrier():
pImageMemBarriers[0].srcAccessMask (0x4000) is not supported by
srcStageMask (0x1). The spec valid usage text states 'Any given
element of pMemoryBarriers, pBufferMemoryBarriers or
pImageMemoryBarriers must not have any access flag included in
its srcAccessMask member if that bit is not supported by any of
the pipeline stages in srcStageMask, as specified in the table of
supported access types.'
vkDebug: DS: 6: vkCmdDraw(): Cannot use image 0x7 with specific
layout VK_IMAGE_LAYOUT_GENERAL that doesn't match the actual
current layout VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL.
vkDebug: DS: 61: Descriptor set 0xc encountered the following
validation error at vkCmdDraw() time: Image layout specified at
vkUpdateDescriptorSets() time doesn't match actual image layout
at time descriptor is used. See previous error callback for
specific details.
Change-Id: I1a3200221ac725c2fa661eff3ac075262b9355c2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It's the one that is more complex - with a text-based 'progress-bar'
and queueing (for some, probably educational, reason) of requests.
Changes:
- update the C++ syntax (mem-initializers, range for, etc.)
- new-style headers
- redirects should not result in creating an empty file. Since we
have no UI, and this example is already complex enough, settle
for just reporting the redirect and removing the empty file.
Task-number: QTBUG-60628
Change-Id: I0b69cd77414ecac7c0bc6b2f8f787befc978de28
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mainly 'modernizing' - use <c...> c-library includes (<stdio.h> -> <cstdio>),
add appropriate using directive; minor fixes in formatting + removal of a
hated double negation (aka ifndef QT_NO_NOTHING). Also, as our rules
('how to write examples') suggest - replace too many inclusion directives
with module-level headers. Basic redirects handling - do not create empty files
for redirected requests (or even files with some useless html).
Task-number: QTBUG-60628
Change-Id: Ia4398d39126313e6213bc7244d11a55958e64dec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
