Xcode allows building a project targeting either the device or
simulator sysroot in one single build dir, but for the sysroot
switching to work there should be no linker or compiler flags
referencing absolute paths of a specific sysroot.
During CMake configuration of a project targeting iOS, all found
system libraries will be within one single sysroot, either the device
one or the simulator one, whichever one was passed to
CMAKE_OSX_SYSROOT. CMake will then generate the Xcode project
and pass those absolute paths, which makes sysroot switching within
Xcode not work.
To avoid that, the CMake documentation recommends passing linker and
framework flags of the form '-lfoo' and '-framework bar' instead of
absolute paths. Xcode then takes care of setting the correct framework
search path.
Zlib is one of the libraries found in the iOS sysroot and thus passed
as absolute path.
To avoid that, create a new FindWrapZLIB find script. The target it
creates will pass the absolute path to the library on non Apple
platforms and an -lz linker flag on Apple platforms (macOS and iOS).
To avoid issues with target global promotion when system PNG package
is found, ensure that a found ZLIB::ZLIB target is promoted to global
manually in src/gui/configure.cmake.
Pick-to: 6.1
Change-Id: I8bd8649be4f680a331ad51925f27cb9d13ac5e5f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The testcase relied on having optional packages, and that the last
package in that list was found. Otherwise the version numbers of
the found modules were not set.
Change-Id: I76743fd029d6eed2f4b347280591e6fdaed19053
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After 7a738daa97 we require
QLineF::setLength() to take a finite length, and this code was probably
always risky when HoverPoints has two points that are both 0,0.
It's probably a transient condition anyway.
Fixes: QTBUG-92908
Change-Id: If81122d2f78761026b0d656ceffe173132751317
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
ScreenGadget visualizes virtual desktop screen layout,
in device independent and native pixels.
This can be used to debug the (sometimes surprising)
device independent screen geometry resulting from Qt
applying a scale factor.
Change-Id: I5b18e0fc9a54ba3e14d648794429b2eeadd25748
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Display active environment variables. Reorder the
labels with device independent values to the left
and native values to the right. Display the Qt scale
factor.
Change-Id: If95c252b06eff5abd91a25847777246effe94be2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add an #include for a header that was only accidentally included
transitively.
Pick-to: 5.15 6.0 6.1
Task-number: QTBUG-92822
Change-Id: Ie29bb0e065f2db712e9cf9539b15124ff0ced349
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
There is only one property in QSequentialAnimationGroup,
currentAnimation.
This patch ports this property to the new property system
Task-number: QTBUG-85520
Change-Id: Id528d30f551e88a6165bbb6a3c09d44e89257de5
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Port watchMode in QDBusServiceWatcher to the new property
system. This is the easiest part.
Task-number: QTBUG-85520
Change-Id: I588212af205e77765862b8fecdbdcbf871717142
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The engine pointer is guaranteed to be initialized in line 1838, so we
can assert that the correct value is passed into the function to fix
static analyzer warning 1d9b8ce922ee0891fb0d477dc17fdb8d.
Change-Id: I773bbaa579afec0d7a79d4393ee66fd26ba9629b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Various checks for "engine" in the previous code suggested that
engine might be nullptr by the time we want to populate the
out-parameters.
This must not be the case, and QFontDatabase::load asserts
already that a valid engine is loaded and returned.
Fix static analyzer warning 7f68daa282c72e8cc172c681eb02f559 by
asserting it here as well.
As a drive-by, change the tested out-parameter to the last one
in the list of optional parameters.
Pick-to: 6.1
Change-Id: I3d9ff0f5f7c4740014301c073480d14fef54e2fb
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Setting a cancel button on QProgressDialog more than once caused the layout
to be invalid. The layout was only applied when the dialog resizes or the
style changes, but not when a new cancel button is set.
The solution is to update the layout() before showing the dialog when adopting
new child widgets.
Fixes: QTBUG-19983
Pick-to: 6.0 6.1
Change-Id: Id8fb1ac56e94a9bd97d4559a2e8d4835856fd7d0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The directory-level targets missed the first level of sub-targets.
E.g. `qtbase_qmake` did not have a dependency to `qmake`.
Fix qt_build_internals_get_repo_targets to first grab all targets of the
subdirectory and then recurse.
Pick-to: 6.1 6.0
Change-Id: I3604000caec22fac9a4cc5f5aaf651d550d16793
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
With CMake 3.20.1 AUTOMOC can crash or hang on Windows when used with
a Qt installation that supports moc depfiles due to missing
multi-threaded locking.
Warn and advise to use a different CMake version instead.
Change-Id: I78d2269c48dfc2541bebcd6ab23aaa5595012149
Pick-to: 6.1 6.0
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QList tests have mostly a scheme of:
void opInt() { op<int>(); }
void opMovable() { op<Movable>(); }
void opCustom() { op<Custom>(); }
As a drive by, move the leak checking into a separate struct/macro
Change-Id: I7cdda3a6c2aa324968aa26594da9f9eafbd49a0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's much easier to un-do a QT_HASH_SEED=0 by simply setting it to empty
in a command-line, as in:
QT_HASH_SEED= ./appname
[ChangeLog][Important Behavior Changes] Previously, if the QT_HASH_SEED
environment variable was set but empty, Qt would interpret that as if it
had been set to 0, thus disabling the hash salting functionality. Since
this makes setting and unsetting this variable difficult in scripts, it
has been changed: if the variable is set but empty, it is interpreted
now as if it had not been set and the hash salting functionality is
enabled.
Change-Id: Id2983978ad544ff79911fffd1671f5473978a6bc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We've been warning since commit 4ba740b3ba
(2017-03-31, Qt 5.9.0).
Change-Id: Id2983978ad544ff79911fffd1671f505fee6f282
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A sticky QPropertyBinding is a binding that does not get removed when a
write occurs. This is used in the QML engine to implement support for
the QQmlPropertyData::DontRemoveBinding flag.
Task-number: QTBUG-91689
Change-Id: Ib575b49abe634215318ccc7ba46212cc21eb4dad
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
UAX #29 in Unicode 11 changed the EGC algorithm to its current form.
Although Qt has upgraded the Unicode tables all the way up to
Unicode 13, the algorithm has never been adapted; in other words,
it has been working by chance for years. Luckily, MOST
of the cases were dealt with correctly, but emoji handling
actually manages to break it.
This commit:
* Adds parsing of emoji-data.txt into the unicode table generator.
That is necessary to extract the Extended_Pictographic property,
which is used by the EGC algorithm.
* Regenerates the tables.
* Removes some obsoleted grapheme cluster break properties, and
adds the ones added in the meanwhile.
* Rewrites the EGC algorithm according to Unicode 13. This is
done by simplifying a lot the lookup table. Some rules (GB11,
GB12, GB13) can't be done by the table alone so some hand-rolled
code is necessary in that case.
* Thanks to these fixes, the complete upstream GraphemeBreakTest
now passes. Remove the "edited" version that ignored some rows
(because they were failing).
Change-Id: Iaa07cb2e6d0ab9deac28397f46d9af189d2edf8b
Pick-to: 6.1 6.0 5.15
Fixes: QTBUG-92822
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
There isn't a QByteArray constructor taking a char8_t*. (I am not
sure if there should be one; QByteArray is not going to anything
special about that information anyways.)
Change such strings to be "ordinary" narrow string literals.
There should be no problems at doing so, as by default we build in
UTF-8 mode under all compilers.
Pick-to: 6.1 6.0
Change-Id: Ia200ec6e3b0453bad033d5d8ff34c013bb27abd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The call assumes two arguments for QString::arg, but only one was passed.
The error string became a buttontext argument, which is clearly wrong.
Task-number: QTBUG-92483
Change-Id: I1fab5be88331f636185693b721f0d9688c0d9ff3
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Add Qt::begin/endPropertyUpdateGroup() methods.
These methods will group a set of property updates together and delay
bindings evaluations or change notifications until the end of the update
group.
In cases where many properties get updated, this can avoid duplicated
recalculations and change notifications.
Change-Id: Ia78ae1d46abc6b7e5da5023442e081cb5c5ae67b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When a property value changes, first update all dependent bindings to
their new value. Only once that is done send out all the notifications
and changed signals.
This way, if a property depends on multiple other properties, which all
get changed, there will only be one notification; and (potentially
invalid) intermediate values will not be observed.
Fixes: QTBUG-89844
Change-Id: I086077934aee6dc940705f08a87bf8448708881f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
While we do not support cross-thread bindings, reading of properties
from a different thread when no bindings are involved must continue to
work.
However the check whether bindings are involved used the QBindingStatus
in the QObjectPrivate. That one contains the wrong value when the
QObject is accessed from a different thread than the one it has affinity
with. This patch reads from the thread_local directly instead to
sidetstep the issue.
Change-Id: I8ce2092f35e210566934e2439beb5d48fd8cf226
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Too much of the existing code in Qt requires eager evaluation without
large scale modifications. Combined with the fact that supporting both
eager and lazy evaluation has a high maintenance burden, keeping lazy
evaluation, at least in its current state, is not worth it.
This does not diminish other benefits of the new property system, which
include
- a C++ API to setup and modify bindings and
- faster execution compared to QML's existing bindings and the ability
to use them without having a QML engine.
We do no longer benefit from doing less work thanks to laziness. A later
commit will introduce grouping support to recapture some of this
benefit.
[ChangeLog][Import Behavior Change][QProperty] QProperty uses always
eager evaluation now when a dependency in a binding changes.
Change-Id: I34694fd5c7bcb1d31a0052d2e3da8b68d016671b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Remove the MinGW-related hack that was introduced in
ec31953007. It doesn't seem to be needed
anymore with recent MinGW versions and prevents using a system jpeglib
that disagrees in its jboolean declaration with our bundled jpeglib.
Fixes: QTBUG-88093
Change-Id: Ic6eb03b4b395fe3e8dcedf52489e8642289fc98e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In Qt 6, QMultiHash does not iherit QHash
Pick-to: 6.1 6.0
Change-Id: Iaad8768d681a9aad2bb1f80fd87904f0dd9683d4
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
CMake 3.18 introduced the file(ARCHIVE_CREATE) API that we use with
COMPRESSION Zstd for compressing corelib's mimedatabase.
It's possible to build CMake without proper zstd support, and we have
encountered such builds in the wild where the file(ARCHIVE_CREATE) call
crashes.
Add a configure test to determine whether CMake properly supports the
Zstd compression method.
Fixes: QTBUG-89108
Change-Id: I37e389c878845162b6f18457984d4f73a265b604
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
GCC 10 in C++20 mode will still try to use
std::indirectly_readable_traits on QList iterators, and since it
does not have the fixes for LWG 3346 / 3541, it will fail to build:
/usr/include/c++/10/bits/iterator_concepts.h: In substitution of ‘template<class _Tp> using __iter_value_t = typename std::__detail::__iter_traits_impl<_Tp, std::indirectly_readable_traits<_Iter> >::type::value_type [with _Tp = QList<std::pair<int, int> >::const_iterator]’:
/usr/include/c++/10/bits/iterator_concepts.h:248:11: required by substitution of ‘template<class _Tp> using iter_value_t = std::__detail::__iter_value_t<typename std::remove_cv<typename std::remove_reference<_Tp>::type>::type> [with _Tp = QList<std::pair<int, int> >::const_iterator]’
/usr/include/c++/10/bits/iterator_concepts.h:468:11: required from ‘class std::reverse_iterator<QList<std::pair<int, int> >::const_iterator>’
../src/corelib/itemmodels/qsortfilterproxymodel.cpp:669:43: required from here
/usr/include/c++/10/bits/iterator_concepts.h:243:13: error: ambiguous template instantiation for ‘struct std::indirectly_readable_traits<QList<std::pair<int, int> >::const_iterator>’
243 | using __iter_value_t = typename
| ^~~~~~~~~~~~~~
/usr/include/c++/10/bits/iterator_concepts.h:231:12: note: candidates are: ‘template<class _Tp> requires requires{typename _Tp::value_type;} struct std::indirectly_readable_traits<_Iter> [with _Tp = QList<std::pair<int, int> >::const_iterator]’
231 | struct indirectly_readable_traits<_Tp>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/10/bits/iterator_concepts.h:236:12: note: ‘template<class _Tp> requires requires{typename _Tp::element_type;} struct std::indirectly_readable_traits<_Iter> [with _Tp = QList<std::pair<int, int> >::const_iterator]’
236 | struct indirectly_readable_traits<_Tp>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So hide element_type as well.
The CI didn't catch this because the CI doesn't build in C++20 mode.
Amends 595b4e1a9b.
Change-Id: I5c8e47d693ca584571cd89f856d08ba249dd05ab
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Currently we support:
QString s = QString::fromUtf(u8"foo", 3);
But we don't support
QString s = QString::fromUtf8(u8"foo");
QString s(u8"foo");
There's no reason not to have these two functions. Guess what,
we've actually got code _in Qt_ that tries to build a QString out of
a char8_t; that code stops compiling under C++20 (which is supported,
but not CI-tested at the moment, it seems).
Re-add the missing constructor and fromUtf8 overloads.
[ChangeLog][QtCore][QString] Added a constructor and a fromUtf8()
overload taking a `const char8_t *` argument.
Task-number: QTQAINFRA-4117
Task-number: QTQAINFRA-4242
Change-Id: I1f0ae658b3490b9e092941cabcc7fb8fc4c51aa3
Pick-to: 6.1.0 6.1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If one "accidentally" uses a release build of the unicode tool,
the asserts within it won't fire. Enable them in all cases.
Change-Id: I9d63641dc6d6d2e5805b61b36f8c28e624b25e12
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Prior code was naively assuming the character after a high surrogate
would necessarily be a low surrogate, which is buggy.
Fixes oss-fuzz issue 29718.
Pick-to: 6.0 6.1 5.15
Change-Id: I10f023c4b5024a0d76fea0a3672001063591ec6d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We need the metatypes for anything directly or indirectly exposed to
QML. Switching this on has no runtime overhead. For interface libraries
we cannot generate any metatypes, though.
Change-Id: I7b7f85bb4e16c28d00383c5c88b0f1c172c8d193
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is slow and will use too much memory.
Pick-to: 6.1 6.1.0 6.0 5.15
Fixes: QTBUG-91889
Change-Id: I45c5e6038357c87bbb85b1ace17ef39a2a814ea0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds helper methods to test bindable properties in the QTest
lib. These methods can be useful in many Qt modules, so we decided to
have them in qtbase.
For now they are in the private header, because we are not sure that
they can be useful for the end users.
Task-number: QTBUG-89874
Change-Id: I6738728df1bcd895758008ef2ade0d3693802c3e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@insta.fi>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Because take() is deprecated, and these pointers are meant to leave the
scope in some branches.
Pick-to: 6.1
Change-Id: I5432d91a28f4c5c8c17fadf7ce3bcd41716e216a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Presumably the code at some point would do a
QByteArray::fromRawData-style thing. But now it doesn't do that so
the current code was a bit strange. It would map the content of the file
to memory only to then copy the content into a QByteArray. Then it
reparents the file to the QBuffer, keeping it alive even if its not
needed.
Fixes: QTBUG-92838
Pick-to: 6.1 6.0 5.15
Change-Id: I88f8cd1b64e0fd13d08b5cc4df44661e216da340
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It was originally marked \obsolete without any comment on what was to
be used to replace it, or deprecation markings in the declaration, so
it got missed at 6.0. More recently it's been deprecated in favor of a
territory-based name; but actually it was obsoleted by (iterating the
territory() of each return from) matchingLocales() in Qt 4.8.
So back out of adding territoriesForLanguage to replace it and,
instead, mark it as deprecated in the declaration, in favor of
matchingLocales(). Also rewrite the implementation to be exactly that
replacement. Rewrote the one example using it.
Fixes: QTBUG-92484
Change-Id: Iedaf30378446dd9adac5128b7ee5fee48aab1636
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow up on some comments saying "TODO Use QTimeZone when available"
in converting times, outside the range supported by the system's
time_t functions, between local or zone time and UTC. Since this
required two formerly static functions in qdatetime.cpp to access
QTimeZone's d-ptr, turn those into methods of QTZ's friend QDTPrivate.
Change-Id: I27fe03d8eff9f4e98661263b1a1d4d830f4e7459
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>