The check for Qt::Key_A to handle selectAll was changed to directly
compare to QKeySequence::SelectAll as this will only match Ctrl. The
former implementation also triggered when e.g. Shift was pressed.
Added a check that selectAll is only called when selection is not
disabled, i.e. selectionMode=NoSelection.
Added a unit test for selectAll().
Task-number: QTBUG-26687
Change-Id: I721e7ab590b55d7d754b3b74ef01756fa5aa1315
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Ensure top level widgets are cleaned up.
- Place wizards beside each other for comparison.
- Use classic style on Windows to avoid interference by Vista style.
Change-Id: I223a40ea14eefe65dc2e9e8ddee44b0f0c806e3d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Apparently, this causes problems with the completer due
to the fact that it matches the root drive "C:\" on Windows.
Task-number: QTBUG-41681
Change-Id: Iaf96675067e22e679371139a1a2fbf011a5edbdc
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Streamline code and remove code that has no effect.
- Create temporary directory and files only when it is actually
required (empty start path).
- Remove try/catch as it is not commonly used in Qt autotests.
Its original purpose was apparently to ensure temporary file
cleanup, but that should now work since smart pointers are used
for temporary files and directories.
- Introduce variable for case sensitivity.
Task-number: QTBUG-41681
Change-Id: Ie5f621c30fc461b880292b853e0660b8fba316eb
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Take PM_FocusFrameVMargin into account.
Task-number: QTBUG-35146
Change-Id: I1499790537ddf9fbb912ab764b7d049ee11af95d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Say you have a document of two blocks of text.
When you select a block of text in the document and then replace this
with a new empty block (by pressing enter) and then subsequently
undo this action, the following three steps are performed as a
chain of undo commands:
1. Remove the empty block at the beginning of the document
2. Insert a new empty block at the beginning of the document
3. Insert the text back into the first block
Since a block is removed and inserted in the same go, both blocks
require a relayout, since the accumulated change spans both blocks.
However, in QPlainTextDocumentLayout we would only look at the max
of either removed chars or added chars. This would match the text
length of the first block at this point, so we would only relayout
that block. However, since we are also removing characters, the
actual accumulated change to the document is larger. We should
relayout any block touched by the sum of the added and removed
character counts.
Missing this, the paint event would later query
block.layout()->lineForTextPosition(0) which would give an invalid
line despite the fact that the block.length() > 0. This caused
a crash in the paint event when the full width selection was
turned on.
Note that the logic here was only recently updated to include the
removed characters at all in the logic, by the SHA1:
2983cb9531.
[ChangeLog][QPlainTextEdit] Fixed a crash when using full width
selections and issuing a complex undo command chain which removes
and inserts an empty block in one go.
Task-number: QTBUG-36415
Change-Id: Iafe8a69e455e0c713a48714f10f0cace69c84f51
Reviewed-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
They're gone since Qt 5.0 and only exist as typedefs for QStyleOptionFrame.
Change-Id: Icff45cbd3a47db8618a7f7a80f7252651969237c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fixes a regression against Qt 4, where Show/Hide events were received
when the minimized state changed.
It is restricted to QWidget so as not to introduce additional events
to QWindow (which already has signal visibilityChanged()) and cause
unexpected side effects in QQuickWindow.
Task-number: QTBUG-41312
Change-Id: Ib165a5daf7a7e5d8231ef8a94b70e8a2a3253057
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Do not zoom 1pt on every single wheel-event, but instead scale
the zoom with the size of the angle delta.
Change-Id: Idbe17356c7845ebd0039f655d3e611e71c6f0dd6
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Only step the value in the spin box when we have accumulated one wheel
tick worth of wheel delta.
Also fixes the obsolete contructors of QWheelEvent so they set the non
obsolete properties.
Change-Id: Ic6ea4b37afa8eec85a6ca7bdc0d919bf8fb02608
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
When a window's screen changes it may recreate the platform window.
In that case, update the winId in the widget to keep it in sync.
Task-number: QTBUG-40681
Change-Id: Iec815320214832bb63952de3a5bd1340a04dacd4
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
QToolButton::sizeHint() takes into account the presence of a menu.
However, setMenu() doesn't retrigger a size hint recalculation. Hence,
(un)setting a menu on an already sized tool button won't properly
reset the size hint. Since the calculated size hint is cached,
delete the cached value and call updateGeometry to cause a
recalculation.
Task-number: QTBUG-38949
Change-Id: I6e79e5e70e31afdfd129282b3668875eca86f51d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSplitter::handleWidth() returns either a style dependent value if
d->handleWidth is negative or the value of d->handleWidth itself.
So to preserve this choice after calling saveState()/restoreState()
we should save and restore the value of d->handleWidth rather than a
result of handleWidth() which is non-negative.
Change-Id: Idc11f8063d34b6c4a5f9b0a0032868679766dfb9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
And not a normal pointer. The problem is that in certain scenarios,
if the TLW containing a QSizeGrip changes and the old TLW gets
immediately destroyed, then the mechanism which updates the tracked
TLW is run too late, and ends up accessing a dangling pointer.
Therefore, we need to protect that pointer via a smart pointer.
Task-number: QTBUG-22867
Change-Id: Icfb051132bacde604f660ac7a98bc0a9d1022c68
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add a new PM_TreeViewIndentaion enum value to QStyle and get
the corresponding pixel metric in QTreeView.
[ChangeLog][QtWidgets][QTreeView] Indentation is now style-dependent by default.
[ChangeLog][QtWidgets][QTreeView] Added resetIndentation().
Change-Id: Ifad7987b8f3c6cd32987b89d95390f33043d8f19
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Adam Majer <adamm@zombino.com>
This is useful when writing a generic preview-icon-generator which
should work with different type of views, itemviews and QML views.
A way to be notified of a change of icon size was missing on the itemview side.
[ChangeLog][QtWidgets][QAbstractItemView] Added iconSizeChanged signal.
Change-Id: I19b3049961002ca27d71aefbb6980d1e6f225c79
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Widgets and layouts added or inserted to a layout are checked for:
- Not being NULL
- Not being the parent widget of a layout or the layout itself,
respectively
Without this commit, adding a widget to its own layout would result in a
CPU-hogging infinite loop. Now, a warning is written to stderr and the
add or insert function call is ignored.
The checks are implemented as public functions of QLayoutPrivate and
thus accessible in QLayout's descendants to be used in various
"addWidget", "insertWidget", etc functions.
Unlike 'classical' layouts like QGridLayout, QFormLayout does indeed
accept widgets that are NULL. To not break this behavior, any call for
the check functions first tests if the widget or layout, respectively,
to test is NULL or not and calls the check only in the latter case.
Automated tests for QBoxLayout, QGridLayout, and QFormLayout were added.
For an unpatched Qt 5.3, each of those automated tests will freeze as
explained in QTBUG-40609. For a fixed version, warning messages about
invalid parameters to addWidget/addLayout/... calls will be read by
QTest::ignoreMessage, resulting in a passed test.
Change-Id: I1522d5727e643da3f7c025755975aca9f482676d
Task-number: QTBUG-40609
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When setting a new screen, the code calls QWindow::destroy(), which
recursively destroys all child windows. It then calls create() on the
top-level window, leaving child windows destroyed. This causes crashes
if you have embedded native widgets.
Task-number: QTBUG-40817
Change-Id: Iaace2589f48bbfd5faaf5ff95357ff43b310504a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Timer granularity means that sometimes this won't wait the full timeout before
vanishing the message. Add some extra tolerance so we don't unnecessarily fail
integrations.
Change-Id: I203ac16cda7bd1f0437dd3febc0509c17e86c25a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QPanGesture recognizer requires single-point touch events. The touch
implementation in Qt 4 would test Qt::WA_TouchPadAcceptSingleTouchEvents
and forward single touch events if set.
Making this work in Qt 5 is a little bit more involved since the platform
plugins don't know about widgets.
Change the Cocoa touch implementation to send single-point touch events
to QWidgetWindow windows only. Make QApplication forward single-point
touch events only if the target widget has the
Qt::WA_TouchPadAcceptSingleTouchEvents attribute set.
Task-number: QTBUG-35893
Change-Id: I68712a5e3efb4ece7a81ca42f49c412e525eeb3a
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Everything else passes, after some pending fixes in QtWayland.
Change-Id: Ibd8efcaab8c5210111854f1a7362434046a62898
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Time taken by this testcase reduced from 7 seconds to 5.1 seconds for me.
Change-Id: I93b1c5fbc7d9d6515c9ce51a64fdd5c2ffbd54c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
So when they fail it's easier to figure out why.
Change-Id: I7e76a6e0b8076ede30a6bb9049a031063c569dfc
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This takes the total runtime of tst_qlistview for me from ~47 seconds to ~10
seconds.
Change-Id: Ie6fe95fe0852c2de37e99c2ad02230de78e0995e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
In some language, mnemonics put after label text within parentheses.
e.g. "&Open" is translated to "開く(&O)" in Japanese.
OS X doesn't use mnemonics and '&' in label text is removed.
Mnemonics in parentheses (and spaces before them) also should be removed.
Change-Id: I88c0a1f60af7e148b3cf24a4e215ce807d62bce3
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
With SHA1 47b3ecf3f4 some tests got
commented out by accident. This re-enables those tests.
Change-Id: If9c7d8a672b66086895a0383fe87d3101fb146fb
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The "adoption" code is taken from setLabel().
Task-number: QTBUG-40503
Change-Id: Id512b28eb756b4a80e5701e599e2cbdf5346ff62
Reviewed-by: David Faure <david.faure@kdab.com>
Read data into local variables and apply only after a check.
Task-number: QTBUG-40462
Change-Id: Id06060d0d5b0eafc2d303526a86d552ff5747a72
Reviewed-by: David Faure <david.faure@kdab.com>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Use sizes relative to the test widget size; move windows relative
to the top left point of the available screen geometry. Set a window
title on widgets to be able to identify them. The test now
passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: I5df9198e390befeb3ca18796e24180135a084aad
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
It is documented to be, and the LanguageChange event is caught and processed.
However, retranslateStrings() uses QProgressDialog::setCancelButtonText(),
which unconditionally sets useDefaultCancelText=true, blocking any further
changes to the button text by subsequent LanguageChange events.
The fix is to use extracted QProgressDialogPrivate::setCancelButtonText()
which - quite intentionally - doesn't set useDefaultCancelText.
Task-number: QTBUG-40504
Change-Id: I6e701deda10c454cb088c0b0778ac2d6adff574a
Reviewed-by: David Faure <david.faure@kdab.com>
The associated test has unearthed that setBar() fails to make the new bar a child
of the progress dialog. This will be fixed in a separate commit.
Task-number: QTBUG-40502
Change-Id: I2d09ebb07ae6395449a4efe38a638df831eebdd7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Introduce function QMdiSubWindowPrivate::storeFocusWidget()
to store focus widget and call this when de-activating a
sub window. Change restoreFocus() to return a bool and call
it from QMdiSubWindowPrivate::setActive().
Task-number: QTBUG-38378
Change-Id: I18dbe66ce85213ca5b4907b5a09126544415351a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Fix tests widgets leaking widgets and ensure it stays
that way by adding a check to cleanup().
Task-number: QTBUG-38858
Change-Id: I77a81d823c68cf0b4e51c2da55b1c473d6e4170b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
[ChangeLog][QtWidgets][QLineEdit] The signal textEdited() is now
emitted when the user clicks the clear button created by
setClearButtonEnabled() as well.
Task-number: QTBUG-40287
Change-Id: Iacd303ffd1533f27cfa68a6120cdd370e3d31ddc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Otherwise, when interrupting the test half-way (e.g. in gdb),
the user's ~/.config/QtProject.conf would be modified.
Change-Id: Id582c4a3fbf0acbed460126fccf0d39b3a09758a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When a dialog was parented on a native child widget,
its window handle was used as a transient parent.
This confused QPlatformWindow::initialGeometry() among
other things. Use top level window as is in Qt 4.
Task-number: QTBUG-40195
Change-Id: Ic82adc276175f92adde825fb2551274351e41f30
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Prevent the QGroupBox from changing the enabled state of
dialogs parented on it.
Task-number: QTBUG-40132
Change-Id: I91cc6ccf5ade0b3a491020ed947d4aceca62d7b6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Prevent the splitter from adding them to the layout or showing
them.
Task-number: QTBUG-40132
Change-Id: Ife2be0bbd7e489570ef41f6f72a034b356c65f18
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
It can happen when the sidebar only has only one item, due to
"My Computer" being missing.
Change-Id: I2b38fef45139f1dfa20d88059e56185c3163a833
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
So that this method is at least called once in the test :)
Change-Id: I3b5fc6b7c464d9e56264c709cfa313d475004207
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Instantiate the timer on the stack to prevent it from
interfering with other tests.
Change-Id: I91ffe23b502fcddaeb6d6d3f89ea3d27b083cdb0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Broke tst_QMenu::statusTip by closing the menu while it should not. (and therefore, a QTimer::singleShot that fires while following test are running is making the test fail)
This reverts commit 50c04d6318.
Change-Id: Ib4ef8190f945b915fe268745cc64d471994c5e2d
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch aims to implement the session management available on OS X.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Task-number: QTBUG-33034
Change-Id: Icedc8590a1c0934d9bc87d3a43d6702a9903bfb8
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This property is used to automatically hide tab bar if it has only one
tab.
Originally-by: Denis Kovalskiy <denimnumber1@gmail.com>
Change-Id: I6967f760010fa55bad6a5986c29abe7ccf625cf8
Reviewed-by: David Faure <david.faure@kdab.com>
Fixed qwidget test cases for platforms that show windows full screen by
default and that don't support WindowMasks. Incorporated QNX/BlackBerry
peculiarities.
Change-Id: I349ecab5cef35c7d9751aa547465f685d620164a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
In "setOpaqueResizeAndMove" this patch makes sure that the content of a subwindow
actually fits into the window, otherwise the resize does not work properly.
The content is dpi dependent and thus the pixel size of it increases with the display
dpi value.
Furthermore when moving the QMdiSubwindow this patch makes sure that we actually grab
the window's header and not one of it's tool buttons (minimize, maximize, close).
Change-Id: I88314994957c5883f57c09c9240a3b83f1ee42ed
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
If the widget exists in the style rules cache before it polishes for the
first time then it should be removed from styleSheetCache too so that the
latest set stylesheet is used for the polishing.
Task-number: QTBUG-39427
Change-Id: Ic1e7988afe530f16ea9996bae56543ed554d6be9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This reverts commit a1c5198387.
The idea of detecting non-spontaneous events by comparing
against the widget's crect has problems when sequences
of programmatic resizes occur. In addition, QWindowSystemInterface's
queueing of events is problematic for this.
Task-number: QTBUG-39611
Task-number: QTBUG-32590
Change-Id: I4674d8d5d5d432d938f7226b5790543335665c1f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
It is NOT always the same as isEnabled().
Added a unittest to prove it.
Change-Id: I7717126835923e8c091249bfcdf81767c44fb5f7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When navigating with the directional keys or tab/backtab, there are
certain situations where the cell that is edited is incorrect.
For example, consider the table below.
'^' represents the starting cell and the direction of navigation.
'c' represents the index that is arrived at as the currentIndex prior to this patch as
reported by view.selectionModel()->currentIndex().
'x' is the cell that should be edited:
+---+---+---+---+
| | | e | |
+---+---+---+---+
| | x | |
+---+ +---+
| | c | |
+---+---+---+---+
| | | ^ | |
+---+---+---+---+
Before this patch, the cell that will actually be edited is c, rather
than x, so after editing the cell and pressing enter, the previous
contents of the cell will still be shown.
With this patch, currentIndex() will be changed after every call to
cursorMove(). Navigation into and out of cells is not affected because
the visualCursor member in the QTableViewPrivate tracks the keyboard
navigation entry point. If after the up navigation into the span, the
user presses up, the cell entered is 'e', not the cell above 'x'.
Task-number: QTBUG-29239
[ChangeLog][QtWidgets][QTableView][QTableWidget] currentIndex() now
reflects the top left cell when in a span.
Change-Id: I3dc3db46ebba340102860fc4ad98fcaf91484983
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QWidget::resize() or QWidget::move() set the new size/position values
and send events. The spontaneous events generated by the platform
should be ignored in that case.
Task-number: QTBUG-30744
Task-number: QTBUG-38768
Task-number: QTBUG-32590
Change-Id: I9c0ae38842ed76a8a88ca64fdc9bbe106b2766b7
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Store the value of QMessageBoxPrivate::autoAddOkButton
temporarily when automatically adding the "Show Details..."
button.
Task-number: QTBUG-39334
Change-Id: I173c83893548ee83b3d8ea2743f87686c32657e7
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Use QTRY_COMPARE instead of hard-coded timeouts, ensure window is
shown.
Change-Id: I4f23144ee14150c4fba9c6fbd8c4ee2da472cc75
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This fixes an issue where, if characters were removed from several
blocks in a single edit, the document layout would end up being
corrupted since the document layout manager wouldn't re-layout the
proper number of text blocks.
Task-number: QTBUG-30051
Change-Id: Idf3a6f567120e6a5dbebf1f65f685d374219328a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
When syncing between QAction and native NSMenuItems, the ampersands
(mnemonics) were removed twice. This lead to double ampersands being
removed instead of replace with single ones.
Task-number: QTBUG-37933
Change-Id: If1d9cd247b467472647b22b38460b44b03f13d82
Reviewed-by: Liang Qi <liang.qi@digia.com>
QEXPECT_FAIL followed by QTRY_COMPARE considerably slows down
tests due to the check timing out.
Task-number: QTBUG-38890
Change-Id: I7f90f2627fc6ce149d159a6d13355ca1a8181d54
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Use the correct palette and enforce Fusion style to prevent
the Vista style from clobbering the tooltip palette in polish().
Task-number: QTBUG-38183
Change-Id: Id19d548f818d801c4914a343e08207195c343888
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Determine the visual index by looking up the column of the QModelIndex
in the logicalIndices array instead of looping.
Task-number: QTBUG-37813
Change-Id: I5c3c73c67537877b03cdc2c36a52041d99f7f49d
Reviewed-by: David Faure <david.faure@kdab.com>
This test doesn't fail on Mac any more.
This reverts commit 36493a7a41.
Task-number: QTBUG-23685
Change-Id: Ib7c56494b07de9839b3287758fe228f799bc343c
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On some platforms all windows are by default forced into fullscreen mode when show() is executed.
In QMdiSubWindow we cannot handle the fullscreen state and should ignore it. Otherwise
the window will be forced in "normal" state and ignore any previously
executed geometry changes.
Change-Id: I09ce6507a1eac6a0adb3405ca3f423642d30f801
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Increase window size when verifying that the scrollbar disappears
when using a small font on Windows 8.1
Change-Id: I7d4520bc5882d8ccd59db3f5bff7e9d6d68a4827
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When stripping the root path from a file name that cannot be found
in the model, use case sensitive comparison depending on
file system.
Task-number: QTBUG-38162
Change-Id: I28e28973fca2da35a5768fdd00cc258b9669a15a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
isES() becomes isOpenGLES(). The library type enums are changed
DesktopGL -> LibGL and GLES2 -> LibGLES. This removes the now
unnecessary version number, the confusing "desktop" term and provides
better readability.
The old function/values are kept until the related qtdeclarative
changes are integrated.
Task-number: QTBUG-38564
Change-Id: Ibb0a1209985f1ce4bb9451f9b7b093c2b68a6505
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Introduce QTRY_COMPARE to let the sorting finish instead
of a hard-coded time-out.
Task-number: QTBUG-29403
Change-Id: I813bf6bcfe7110f49a5b95db589ed8a3f559db89
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
selectFile(): Ensure dialog is destroyed before the temporary file
to prevent leak.
selectFiles(): Introduce scopes to prevent co-existence of 2
instances of QFileDialog, which causes warnings from file watchers
and occasional crashes in accessibility.
Discovered while investigating:
Task-number: QTBUG-38414
Change-Id: I94d2bb3e05538416286641cb08a88d8b3837a8a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Revert 3bb9024952. That fix was an attempt
to handle the issue that has been fixed in 5.3 by
9063edef79 and should have been reverted
when the new approach, that restores Qt 4 behavior for widgets, was
introduced.
Task-number: QTBUG-38242
Task-number: QTBUG-36423
Change-Id: I8f8a82da22605fac90543492e9b2cd2b568544e7
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Show translates to showFullScreen on some platforms. This patch
replaces show with showNormal in the "task248604_infiniteResize" test.
On BlackBerry the test is skipped because all top level windows are forced
fullscreen by the platform.
Change-Id: Ia974c3fcbd0c71c107f4cc3f8405b8ef79ffb5b7
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
In "task177022_setFixedSize" show was replaced with showNormal because on QNX
and some other platforms show translates to a showFullScreen.
For BlackBerry the test is skipped because the first top level window
is always forced into fullscreen mode.
Change-Id: I9df37c6bc47b47cbad4a1623b3eafa723abc6714
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The style is dpi dependent. I.e. on high dpi displays the pixel size of
sections and rows of a QTreeView will be larger.
Change-Id: I7477bfdd641d4db67973cafef5147f026f72c111
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
QMacStyle::styleHint(SH_ScrollBar_Transient) wants either a style
object or the widget argument in order to return correct values.
Change-Id: I2fdef0820334fa66e076a4734eb2a30c722c841c
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The tests expect a home folder which usually is not present on QNX
Change-Id: I44f548a95f14414c0db6f752fd115696069a7b90
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Some margines and sizeHints are DPI dependent on QNX and BlackBerry.
This patch skips two test that expect the section size to be of a
certain pixel size.
Change-Id: I7869f77fc2b623e091f53e420d1a4fdb3ec30724
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
On BlackBerry first window is always shown full screen. However, many
tests rely on a specific window size. A dummy full screen window is
created so subsequent windows have correct size.
Change-Id: Id8bd0212b6eca677953e78505459e3cd69bc6328
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
To guarantee proper positioning at the end of the last line in a
bidirectional text we have to insert the eol position into the
insertion points vector, accordingly to the visual ordering.
Detection of the last *logical* item in a *visual* line is unrelaed
to the text direction, it is simply `iterator.item == iterator.lastItem`.
[ChangeLog][QtGui][QTextLayout] Fixed visual cursor movement
in bidirectional text.
Task-number: QTBUG-18060 (partially related)
Change-Id: I53b6ab889ef580ab0560b620b808b1e09efc0fbd
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Ahmed Saidi <justroftest@gmail.com>
One problem was that tests expect the top-level window to have a certain size,
which is not possible on BlackBerry. Another problem was that certain elements have a
dpi dependent size which the task250754_fontChange test did not consider.
Change-Id: I465ebe234a74d6150cdcbb7fc7e458a62155e0d0
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Using show() might result in showFullScreen() on some platforms,
so let's use setVisible(true) which has the same effect and seems
to be a more crossplatform solution.
Change-Id: I712584ace2adbe73b99e620a1ae5e88ff328fffb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
One issue was that the text of a QPushButton would stretch the widget if the
platform font is to big. The other issue was that the autotest did not expect
that show might translate to a showFullScreen on some platforms.
Change-Id: I3a9903979d766d04c402fda309d0492cfa506ed6
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
In the sizeHint test the show command was replaced by showNormal.
This fixes the test an all platforms where show translates to
showFullScreen.
Change-Id: I307790a6987c61a57679094b26818383815036a0
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The new flag ItemContainsChildrenInShape is similar to the existing
flag ItemClipsChildrenToShape. Setting the new flag makes QGraphicsScene
assume that children are drawn within the shape of the current item
but this is not enforced by clipping. When an application manually
ensures this clipping boundary, setting the new flag removes the
overhead of enforcing the clip with ItemClipsChildrenToShape, while
still allowing other routines to behave more optimially by assuming
children are within the shape of the current item.
[ChangeLog][QtWidgets][QGraphicsItem] Added the
ItemContainsChildrenInShape flag that enables using optimizations
of ItemClipsChildrenToShape without the overhead of enforcing the clip.
Change-Id: I5496fe1ca331b77fd51e0df8a3ace2b8e939eaf2
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Change the test widget to use a non-single-shot timer
to hide the menu once it has become visible.
The test shows hangs on Windows 8.1 CI nodes.
Task-number: QTBUG-37822
Change-Id: I8fc782e53256616119920aef714f89f25863b39f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Ensure triggered() and task176137_autoRepeatOfAction()
are using an active main window. Change click timer in
triggered() to repeat until the menu is visible and
add a timer to close the widget and bail out if the
simulated click fails to close the menu.
Task-number: QTBUG-37822
Change-Id: If675660d02335bffd5caa89796914924dad1a909
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
QFontDialog should always show the correct size, even if the size
is not available in the list of standard font sizes. Native font
dialogs across common platforms show the correct size at all times.
Inside init() function, the size list requires proper initialization
since the initial value of size is zero.
Task-number: QTBUG-10317
Change-Id: Idc9e922ac95f797ac98bbf6c885e52828c4c48fd
Reviewed-by: Liang Qi <liang.qi@digia.com>
This was a regression from Qt 4.7.
[ChangeLog][Widgets][QScrollArea] Respect scrollbar setting for
click-position on Mac.
Task-number: QTBUG-36314
Change-Id: I8bdb1aec9b308b0907f5db29d3519998bc843c18
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The test relies on active focus, so activate the test window in
the beginning of the test to avoid undesired focus widget changes
by QApplication::setActiveWindow() during the test.
Task-number: QTBUG-36395
Change-Id: I6febec7d552224b1754aaf57520ed6d435d29563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This test waits for window activation and gets disturbed by mouse
movements.
The test duration is not long enough to justify the flakyness (around 10
seconds on my laptop).
Change-Id: I985044f954c09442220db3ca318045c04ef6bb77
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The minimumRenderSize is a qreal value that is used as a lower bound to
determine what items are visible when a scene is rendered. If an item's
view-transformed width or height are less than minimumRenderSize then
this item is considered to insignificantly affect the final result and
is not drawn. If the item clips its children to its shape they are
automatically not drawn. This greatly reduces the drawing overhead
for scenes with many items rendered in a zoomed out view.
[ChangeLog][QtWidgets][QGraphicsScene] Added the minimumRenderSize
property which can be used to speed up rendering by not painting
items, smaller than a give size.
Change-Id: Ie208234707dffb4d2fc620fc5d1514e0c144d9a8
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
These internal and obsolete hooks are no longer used. The correct way
to provide platform dialogs in Qt 5.x is to implement a platform theme
plugin, as was done for GTK+ 2.x.
Change-Id: I3f1474fbf760130106b3c47173eaedd2f1a919bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Seen on Windows:
XPASS : tst_QGraphicsAnchorLayout::stability() QCOMPARE(sameAsPreviousArrangement, true) returned TRUE unexpectedly.
tst_qgraphicsanchorlayout.cpp(1399) : failure location
Move check into loop with descriptive message on fail, do not error
out if it actually passes. This now typically prints:
XFAIL : tst_QGraphicsAnchorLayout::stability() The layout has several solutions, but which solution it picks is not stable ( QRectF(30,0 0x10) != QRectF(30,0 10x10) , iteration 3 , item 4 )
Change-Id: Iae8553dbbcedeb70d5d672e3cefbd1f06a63d27d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Correct the tense of send vs sent in comments and documentation.
Change-Id: I1c5ce9a7b1e49b8b0e8dcfde7d732e4c69acf73a
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Based on file system implementation for WinRT, the UNC paths are not
supported on WinRT, so lets disable corresponding tests as well.
Change-Id: Ib45ae618f39d5da39a822160096599b30204cf71
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This is useful for widget styles to react when widgets are set
read-only, e.g. to update their palette accordingly.
[ChangeLog][QtWidgets] All widgets with a setReadOnly method now
send a ReadOnlyChange event (e.g. for app-specific palette changes)
Change-Id: I74719a3e1b7d034d9bfc94305f846f42aae935bd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove the opengl proxy for now. Later it will either be moved into
a separate library or replaced by a QOpenGLFunctions-based approach.
This means that the -opengl dynamic configuration is not usable
for the time being. The rest of the enablers remain in place.
The convenience function QOpenGLFunctions::isES() is now moved to
QOpenGLContext and is changed to check the renderable type. This is
extremely useful since besides supporting dynamic GL it solves also
the problem of GL_ARB_ES2_compatibility (i.e. it triggers the real ES
path when creating an ES-compatible context with a desktop OpenGL
implementation).
Task-number: QTBUG-36483
Task-number: QTBUG-37172
Change-Id: I045be3fc16e9043e1528cf48e6bf0903da4fa7ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When a child of a widget is spontaneously revealed due to a call to
the parent 'resize' method, the child will not receive a paint event
if it has the WA_StaticContents and WA_OpaquePaintEvent flags set.
This is caused by the backing store being pre-emptively resized by the
call to setGeometry_sys, which causes QWidgetBackingStore::sync to skip
the block which handles the static contents.
There doesn't appear to be any reason to preemptively resize the backing
store, since it is always resized as-needed during the the 'sync' method.
This change-set removes the code which preemptively resizes the backing
store.
Task-number: QTBUG-35282
Change-Id: Ie9942854ca5322dfe0f98ed8100810161576be80
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
by default QT contains both core and gui already
Change-Id: I6f5b551104e40a024468e7cb62e302134e9472ec
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The pseudoclass array is declared with length "NumPseudos - 1",
but the declaration has actually 44 elements, not 45.
This caused a zero-initialized last element to be silently appended
to the array. The zero-initialized element broke the sorting
of the array, which in turn broke std::lower_bound usage
(although of course the problem was there from before switching
to the standard library algorithms).
Task-number: QTBUG-36933
Change-Id: I8a02891fc36761b6ae72d15a0a8d6c6a96813947
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On Windows, trailing spaces in a filename are silently ignored, so we
need to strip it before trying to open a file with it. Otherwise it ends
up being stripped later and in a case like " ." it will end up causing
Qt to think that a folder exists when it does not.
[ChangeLog][Platform Specific Changes][Windows][QtWidgets][QFileDialog]
Handled the case of having trailing spaces in a filename correctly so if
the filename ends up being empty that the parent path is used instead.
Change-Id: I6500cc3a44746bf4a65e73bcfb63265a0a97c8a3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
[ChangeLog][QtGui][QWindow]QWindow::icon() now defaults to the application
icon, which can be set with QGuiApplication::setWindowIcon().
Change-Id: Id1974e5cda81775e515c14b294f67fb99351c6c9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Avoid dereferencing the q-pointer if the button has been
destructed meanwhile popup was open.
Task-number: QTBUG-26956
Change-Id: I68190e9fe84c669229ae0ce4d573ee7a02a8a141
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QScreen::grabWindow() is not always reliable because it grabs from the
framebuffer. (The window might then be covered by other windows, e.g.
"Stays on top"-Windows, popups etc).
If QScreen::grabWindow() fails we therefore fallback to
QWidget::grab(). This will not grab from the frame buffer, but it will
ask the widget to render itself (with its current state) to a pixmap
and return it.
QWidget::grab() should usually return the expected pixmap, and the
pixmap it gives is not subject to the state of the window manager.
This means that both QScreen::grabWindow() *and* QWidget::grab()
must produce an unexpected pixmap in order for the test to fail.
Change-Id: I276554155bb1e5b510d2a2d43628d91669464fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It was impossible to hide/show the close button after a QMdiSubWindow
was created.
Task-number: QTBUG-9933
Task-number: QTBUG-27274
[ChangeLog][QtWidgets][QMdiSubWindow] Fixed setWindowFlags() for QMdiSubWindow.
Change-Id: I7db9a1bef5ba8a8ace729acb85682c8b3de9c33c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add overloads to the find() methods in QPlainTextEdit and QTextEdit
that find the next occurrence matching the passed regular expression.
These are convenience methods that eliminate the need to use the
document() method and the need to handle the QTextCursor return value.
[ChangeLog][QtWidgets][QPlainTextEdit] Added find method overload using QRegExp
[ChangeLog][QtWidgets][QTextEdit] Added find method overload using QRegExp
Change-Id: Ia6139b771e3ae4ca02e4b8ea7fde19e5dc71b9d8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Most of the test is executed in RTL mode since it is never restored.
Task-number: QTBUG-36395
Change-Id: I110966085a5a265f093fc4479eebc1f1bf0614c1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The tests then have a predictable, stable environment and do not depend
on file system operations.
Task-number: QTBUG-23697
Change-Id: Ibbd356f8bd7419ec4a3a88d2c0b5cd0830049790
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Implemented that way in src/widgets/widgets/qmdisubwindow.cpp:2081.
Change-Id: I82fdf0c04f1655a130c5e6a6f1e23d325d546ab3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It seems that sometimes QCursor::setPos() will not get the opportunity
to run the event loop before scrolling the list view unless we do it
explicitly.
Task-number: QTBUG-35060
Change-Id: Ic635bd8d1a4e3dbcadf9605e88197df6a0f69fc7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
- Use a separate widget for each test.
- Replace hard-coded timeouts by qWaitForWindowExposed.
- Center windows on screen.
Change-Id: I45ae306fd23348ee5dec3849e64ec98843e8bf32
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This reverts commit 934f062203.
The patch needs to be modified a bit. Many users considers
not having the old feature as a big regression.
The feature needs to be improved with a variable that is
only set when the user uses setSingleStep.
Task-number: QTBUG-33906
Change-Id: I35e5d3e9d3d7a3ebd01807b03a0e7a424185d483
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support to hide the cancel button on the last page of a wizard. This
is useful for wizards where the last page is used as a summary page that
should not be cancelled.
[ChangeLog][QtWidgets][QWizard] Added NoCancelButtonOnLastPage option.
Task-number: QTBUG-7484
Change-Id: I282bda55a8dec9cde6439a9285d79e0a5c6df96a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The style name should be macintosh, not mac.
This also reverts commit 2f46ea9fd6.
Task-number: QTBUG-23680
Change-Id: I7fd06da165ca5bc99801c13af13fdb3d35119566
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This test doesn't fail any more.
This reverts commit 6f21509ac0.
Task-number: QTBUG-23677
Change-Id: Idc094ce0c90b8d3ba0a75d93ccef8da4801605c7
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Change childWidget->windowHandle() to childWidget->internalWinId() in
q_createNativeChildrenAndSetParent() to determine whether should we call
childWidget->winId().
This is because in some circumstances Qt will crash due to accessing
deleted QWidgetWindow object if we use windowHandle(). Think about the
following scenario:
1) create a widget A without parent and add two child widgets B and C to A
2) create a native widget D as the child of B, note that when we set
Qt::WA_NativeWindow attribute to it, its QWidgetWindow will be created
which means its windowHandle() is not null.
3) create a top level widget E as the child of C and show it. This will
make Qt call createWinId() to A and then
q_createNativeChildrenAndSetParent() will be called to create A's native
children recursively and finally make D's QWidgetWindow object become a
child of A's QWidgetWindow object. Please note here that B will not become
a native widget just because at that moment windowHandle() of D is not
null and Qt will not call winId() to its parent B
4) Set A's parent to another widget which has been shown, setParent_sys()
will be called to A and then Qt will call destroy() to A. in destroy() Qt
will try to call destroy() to its children recursively with a condition that
the child has Qt::WA_NativeWindow been set. But D's parent B is not a native
widget right now so B and D is not destroyed. Qt will then deleted the
QWidgetWindow object of A, since E's QWidgetWindow object is a child of
A's QWidgetWindow object, it will also be deleted. Now E hold a deleted
pointer of QWidgetWindow object. This is the source of crash later.
Task-number: QTBUG-35600
Change-Id: I97a20a68e626ee62b15bb4eae580e26f8948923b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
The test used a member testWidget that was cleared and reset after each
test, which caused focus fights and side effects. The widget is now
created and shown only when necessary.
Change-Id: I0dc635e9d4cdf4f899994b88206bb0125526f6df
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
[ChangeLog][QtWidgets][QLineEdit] A blinking cursor in the middle
over horizontally centered placeholder text looks bad. Thus,
horizontally centered content is now considered as an exception
and the placeholder text is hidden when the line edit is focused.
Task-number: QTBUG-31669
Change-Id: I17aa1e6656673f81545a8437f90814b188ad484a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attempt to fix
FAIL! : tst_QAbstractItemView::task200665_itemEntered() Compared values are not the same
Actual (spy.count()): 0
Expected (1) : 1
Loc: [tst_qabstractitemview.cpp(1292)]
which might have been introduced by removing the absolute qWait(200) in favor
of qWaitForWindowExposed() in afe8e368, so trying to compensate with a
QTRY_COMPARE.
Change-Id: Id437acd810b54e005daaf66ffffd4dd586075ab6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Brings Windows QPA on par with other platforms.
[ChangeLog][Windows] Don't cover the taskbar when maximizing
frameless windows.
Task-number: QTBUG-8361
Change-Id: Iba35132f697cb7379650a4c883b616c5c2023d4c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The code was there to do it, but it was using minimumValue instead of
maximumValue to test if the '+' should be allowed.
Task-number: QTBUG-20691
[ChangeLog][QtWidgets][QSpinBox] Entering positive values with the '+'
prefix is now allowed.
Change-Id: Iff62d073e350dc9a33b7e06e4b492048c74437c4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The abstractions are needed so that they can work with both
QGraphicsLayouts and QtQuick.Layouts.
Since the plan is to move the engine to QtGui, this means that the
engine cannot have any references to anything in the QtWidgets module.
As a consequence of that several things had to be done:
* The style info object had to be redone with an abstraction layer
to get rid of style and widget dependency. (Abstract class is
called QAbstractLayoutStyleInfo)
* QGridLayoutEngine must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngine.
* QGridLayoutItem must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngineItem.
Did also some minor cleanups, reordered arguments so that all styleInfo
arguments are last in all function calls
This also fixes QTBUG-35099 (bug was spotted during this refactoring)
Task-number: QTBUG-35099
Change-Id: If49d40f71870dc8d99d2e145be158e3080b595fa
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
A QMenu with no actions gets a size of (0, 0) on OS X.
With the new stricter expose event behavior this
is considered invalid geometry and the platform plugin
won't send an expose event, causing the qWaitForWindowExposed
test to fail.
Add a menu entry since the layoutDirection test is
not really interested in testing the special case of
empty menus.
Change-Id: I5221dc3f0472ac13edf821df08bacc3a4eb5cd9d
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Take longer search strings into account instead of just using the first
character of the search string.
Touches up https://qt.gitorious.org/qt/qt/merge_requests/1418 for
resubmission.
Task-number: QTBUG-3032
[ChangeLog][QtWidgets][QSpinBox] Fixed keyboard selection with
multiple-character strings.
Change-Id: I2f68c8b97b1a1884659dcb19f52b1efeace9b88b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The cursor() test was missing a QTest::moveMouse() before sending of the
mouse event (as all the following subtests do). When run on a desktop with
the panel on the left side of the screen, the mouse pointer would land over
the left item instead of in between them, as assumed by the subtest, and
the following QCOMPARE failed.
Change-Id: Ib74fdf0cfbfbc8ecb79a906610a2da5cb50c89d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Use QTest::qWaitForWindowExposed() and QTRY_COMPARE() instead of
hardcoded timeout.
Task-number: QTBUG-35308
Change-Id: I27eee9932dd3b6087db4ad13b1a4fb184a487f57
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Avoid menus showing up at 0,0 which is a taskbar area when running
Unity.
Task-number: QTBUG-33972
Change-Id: I156eec78248cec1708adf6bcf2e9ddcc98b7d8c4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
There is a known bug where duplicate textChanged signals are
triggered on backspace/delete. The bug has been seen on Windows,
Mac, and Linux. Gabi showed that this duplicate signal is caused by
two calls to finishEdit(), one direct and one nested,
in QTextCursorPrivate::remove().
To attempt a fix, I removed the direct call and do not change the
nested call. This change only affects text buffers when they
receive remove commands.
This seems to fix the problem, shown by the test project
uploaded to the bug tracker and also in countTextChangedOnRemove
in tests/auto/widgets/widgets/qtextedit/tst_qtextedit.cpp.
Further analysis of finishEdit() and QTextCursorPrivate::remove():
finishEdit() calls signals contentsChanged() as long as a valid block
is being edited. Remove() calls finishEdit for all non-table edits,
so finishEdit will be called for most cases.
Methods in the public QTextCursor all seem to set adjusted_anchor
and anchor, none reading it directly, so I haven't found publicly
observable consequences to "adjusted_anchor = anchor = position;".
Task-number: QTBUG-15003
Change-Id: Ic35f25ee81c4007867b47cd8be03c146a673f86d
Reviewed-by: Graham Coleman <ravelite@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Qt::WA_Mapped maps (sic) to windowHandle()->isExposed(), and we set/update
it in QWidgetWindow::handleExposeEvent(). Setting it directly in show_sys
shortcuts QPA and assumes showing a window is synchronous on all platforms,
resulting in trying to flush the widget backingstore when the window was
not exposed yet (due to discardSyncRequest starting to return false).
This reverts commit 829b1d13b2.
Change-Id: I0bd700d4939bc69ba184d8586435b68ec3dd72fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This was a tweak to fix a bug in 2005 which has probably outlived its
usefulness, plus an accumulation of workarounds on top. (started as
48b5266e8ff9b472a16290dd923fe24dd0b6989b in the historical repo)
Task-number: QTBUG-34760
Change-Id: I2c01269e43636385ee5c89305c6b90f4a7f2c537
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
For me, this test failed because I don't have a Documents folder in my
home directory, even though that's what's returned from QStandardPaths
as the first DocumentsLocation.
Fix by falling back on the home directory if documentPaths.front()
does not exist.
Change-Id: I483f62f3b4b43d055c74774a7058a4aa420849b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The dockwidget's toplevel window would be a parent of the container's
window when floating. When plugged back into the mainwindow the
dockwidget's window is destroyed and the container's window along
with it. Added a function toplevelAboutToBeDestroyed to unparent
the containers window before this happens so parentWasChanged will
work correctly.
Change-Id: I06679cfb3a8fa3834c0db0be5973c012b8277275
Reviewed-by: Ulf Hermann <ulf.hermann@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When clicking on a widget currently focused, w/o having Qt::ClickFocus
set as focus policy, the focus should stay on the widget and not get
propagated to the widget's parent.
Task-number: QTBUG-34042
Change-Id: I53f1153829cc7228de02a90e38125b5cf4ee5008
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We claim that -1 is a special automatic value, but calling
setMinimumSectionSize with -1 is unfortunately ignored due a
regression in 524c3e05e8
Change-Id: I7d7e5dbbf78e561849d2f2352c9edb2df36aa181
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Vertical scrollbar may get out of sync. When this happens, the calculation of
firstVisibleItem will retrun "-1". This must be handled in ::sizeHintForColumn().
Added an auto-test for the crashes.
Task-number: QTBUG-34717
Change-Id: I867fd144ef3ce45e382337c5eafe345f573cd944
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Center windows on screen to avoid conflicts with Unity taskbars,
observe minimum geometry for Windows, move cursor out of the
way for Mac. Introduce QScopedPointer to ensure cleanup in
case of failures.
Change-Id: Ic169e015e795597457b8e85a28ff7fcb7b9b9430
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
It's not really clear if styles *must* return a non-negative value for
QStyle::pixelMetric(PM_Layout{Vertical,Horizontal}Spacing), but both
QBoxLayout and QGridLayout seems to be robust enough to handle this.
They will simply make sure that the spacing is never negative.
We therefore make QFormLayout equally robust.
Task-number: QTBUG-34731
Change-Id: I62235bfcd8adf7757cf15bc9927b29650ae6459d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
As the test case shows, clear() is semantically equivalent to
setKeySequence(QKeySequence()), so implement it that way.
Change-Id: Id68edbbf85aac3bcff82c81310c38274ed8e6708
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It introduces QTBUG-34653 (Qt Designer widget box no longer
repainted after collapsing items or using the filter).
This reverts commit 04de24c644.
Task-number: QTBUG-13522
Task-number: QTBUG-34653
Change-Id: Ieb9766e7f15acea901fce4ad7142aa72557b9957
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The grabbing always grabbed the desktop. This caused it to also grab
tooltips, siderbars etc that could overlap the window which again
caused the pixmap comparison to obviously fail.
This will currently only fix it on windows. If needed, it should also
be fixed for other platforms.
Task-number: QTBUG-30566
Change-Id: I5cee8651e1d94dedded0acae8b19f351acd976c4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Check if the item is hidden before show the item(QWidget)
Task-number: QTBUG-13522
Change-Id: I1c605d5cb8a80f340e9b7601612d3760f51cb4a7
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Pass window flags on to ColorWidget constructor and use a window
frame + stay on top-hint for the moveChild/showAndMoveChild tests
to make the screen grabbing more reliable.
Disable animations on Windows since they seem to affect screen
grabbing as well (fading in of windows).
Task-number: QTBUG-30566
Change-Id: I8eacfc203d26674dc1b283d6643f3d434f218f26
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
[ChangeLog][QtWidgets][QAbstractSpinBox] QTBUG-5142 - This will
allow a group (thousand) separator to be shown in QSpinBox
and QDoubleSpinBox widgets.
Task-number: QTBUG-5142
Change-Id: I2e23f5f83c93bb092a2dbd784e06d17d40d42909
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Only Commit, Finish and Cancel didn't have an object name, yet.
Also Extract Method on the switch statement, add a test, and
use QStringBuilder.
Task-number: QTBUG-29924
Reported-by: Leo Arias
Change-Id: I8c29606bc53e9d4caab631da2089e971a9da2d75
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Move the test for QAbstractPrintDialog from widgets into printsupport
Change-Id: Ia7595fa650a7ad565df3090207500ed06564e842
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
After Ic12de12ec51c20de52d040514e90be5e783add43 this functionality
was broken. Added an autotest.
Task-number: QTBUG-34159
Change-Id: I8f41b7073dc57fea855ab87796f09e8a91520d13
Reviewed-by: David Faure <david.faure@kdab.com>
We change the behavior slightly from the initial implementation in
5.1. Forcing the use of native child widgets is causing massive
performance issues so instead, we attach the embedded QWindow directly
to the root window. The only exception is QScrollArea and QMdiArea
which still enforces native windows for the entire parent chain
to make clipping and stacking work.
Task-number: QTBUG-34138
Change-Id: If713637bd4dce630552ace2f8ad6b2e86c063721
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
