Can now detect nested quotes and code blocks inside quotes, and can
rewrite the markdown too.
QTextHtmlParser sets hard-coded left and right margins, so we need to do
the same to be able to read HTML and write markdown, or vice-versa,
and to ensure that all views (QTextEdit, QTextBrowser, QML Text etc.)
will render it with margins. But now we add a semantic memory too:
BlockQuoteLevel is similar to HeadingLevel, which was added in
310daae539 to preserve H1..H6 heading
levels, because detecting it via font size didn't make sense in
QTextMarkdownWriter. Likewise detecting quote level by its margins
didn't make sense; markdown supports nesting quotes; and indenting
nested quotes via 40 pixels may be a bit too much, so we should consider
it subject to change (and perhaps be able to change it via CSS later on).
Since we're adding BlockQuoteLevel and depending on it in QTextMarkdownWriter,
it's necessary to set it in QTextHtmlParser to enable HTML->markdown
conversion. (But so far, nested blockquotes in HTML are not supported.)
Quotes (and nested quotes) can contain indented code blocks, but it seems
the reverse is not true (according to https://spec.commonmark.org/0.29/#example-201 )
Quotes can contain fenced code blocks.
Quotes can contain lists. Nested lists can be interrupted with
nested code blocks and nested quotes.
So far the writer assumes all code blocks are the indented type.
It will be necessary to add another attribute to remember whether the
code block is indented or fenced (assuming that's necessary).
Fenced code blocks would work better for writing inside block quotes
and list items because the fence is less ambiguous than the indent.
Postponing cursor->insertBlock() as long as possible helps with nesting.
cursor->insertBlock() needs to be done "just in time" before inserting
text that will go in the block. The block and char formats aren't
necessarily known until that time. When a nested block (such as a
nested quote) ends, the context reverts to the previous block format,
which then needs to be re-determined and set before we insert text
into the outer block; but if no text will be inserted, no new block
is necessary. But we can't use QTextBlockFormat itself as storage,
because for some reason bullets become very "sticky" and it becomes
impossible to have plain continuation paragraphs inside list items:
they all get bullets. Somehow QTextBlockFormat remembers, if we copy it.
But we can create a new one each time and it's OK.
Change-Id: Icd0529eb90d2b6a3cb57f0104bf78a7be81ede52
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
- QObjects are always passed by pointer not by reference, by convention
- writeTable() takes QAIM rather than QATM to make testing via
QStandardItemModel possible in the future
Change-Id: I5bc6b8cd9709da4fb5d57d98fa22e0cb34360944
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Importer fixes:
- the first list item after a heading doesn't keep the heading font
- the first text fragment after a bullet is the bullet text, not a
separate paragraph
- detect continuation lines and append to the list item text
- detect continuation paragraphs and indent them properly
- indent nested list items properly
- add a test for QTextMarkdownImporter
Writer fixes:
- after bullet items, continuation lines and paragraphs are indented
- indentation of continuations isn't affected by checkboxes
- add extra newlines between list items in "loose" lists
- avoid writing triple newlines
- enhance the test for QTextMarkdownWriter
Change-Id: Ib1dda514832f6dc0cdad177aa9a423a7038ac8c6
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Before the patch the notification was emitted only when the docker
was attached to the panel or changed a position on it.
It looks like the old behavior was documented in a unittest,
so this patch might actually be a "behavior change".
Change-Id: Id3ffbd2018a8e68844d174328dd1c4ceb7fa01d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This closes one compatibility gap with QList, to make
it easier to replace QList with QVector in Qt6.
Change-Id: I5655bc4cd2150a6f09a1ed68c0742f3b42ca47e4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
ask our users to use the range constructors instead. This will allow
us to remove the include dependency towards <list> and <vector> in
Qt 6.
Change-Id: Id90f2058432e19941de1fa847100a7920432ad71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This provides the ability to write live data from a table to Markdown,
which can be useful to load it into a text document or a wiki.
But so far QTextMarkdownWriter is still a private class, intended to be
used experimentally from QtQuick and perhaps later exposed in other ways.
Change-Id: I0de4673987e4172178604e49b5a024a05d4486ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove remaining handling of missing support for rvalue refs.
Change-Id: I78bab8bccfeeb9c76f464f345874364a37e4840a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mimicking what we currently have for QSharedPointer, but also adding
* snake_case version (matching the ones in std)
* rvalue-overloaded versions (matching the C++2a overloads).
[ChangeLog][QtCore][QSharedPointer] Overloads of
qSharedPointerObjectCast have been added to work on std::shared_ptr.
Change-Id: I26ddffd82b000bf876e7c141fdce86a7b8c1d75a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A QTextDocument can now be written out in Markdown format.
- Add the QTextMarkdownWriter as a private class for now
- Add QTextDocument::toMarkdown()
- QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown")
is called or if the file suffix is .md or .mkd
- Add QTextEdit::toMarkdown() and the markdown property
[ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now
a supported format for reading into and writing from QTextDocument.
Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Don't reimplement the protected functions in the base class just
override the access with the using keyword.
Change-Id: I323487d9ddb1d458d5faca020c3eb4d931a9b226
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QLineF::intersect() does not follow the naming rules for functions.
Therefore add a replacement function intersects() instead and also
rename the return type from IntersectType to IntersectionType
[ChangeLog][QtCore][QLineF] added QLineF::intersects() as a replacement
for QLineF::intersect()
Change-Id: I744b960ea339cb817facb12f296f78cca3e7d938
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Before testserver becomes a stable feature, let's keep testserver.prf in
"mkspecs/features/unsupported". The test server's shared files will be
stored in "mkspecs/features/data/testserver".
Because the path of testserver has been changed, all the tests relying
on the docker servers should be updated as well.
Change-Id: Id2494d2b58ee2a9522d99ae61c6236021506b876
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In order to reuse the test server to the external modules, it is much
easier to share the common configurations (scripts) and test data via
Dockerfile. In addition, the external module can create more layers
depending on their needs. Therefore, supporting multi-stage builds is
needed. The disadvantage is that the docker-compose needs to re-build
the images every time. However, it is just a one-time effort. If the
Dockerfile doesn't get changed, the extra build time can be ignored.
Because of multi-stage builds, the test server will keep a Dockerfile at
least. Therefore, the volume sharing is no more needed. The test data of
a service can be added into the images by using COPY/ADD commands.
NOTE:
This patch relies on docker-compose v1.21.0 (docker-compose build now
supports the use of Dockerfile from outside the build context).
Change-Id: Ib3f6a5fcf6979732ae8a40a494a1360fca4ac7bf
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The docker-compose files were trying to use volume sharing, which is not
supported on Windows in conjunction with docker-machine.
Hence create a separate layer on Windows, which copies the configuration
files to the target.
Change-Id: Ifeacc56198ffc8fb2eb31c14ab91334e22e916f5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QMap and QMultiMap will go in a separate commit, due to QMap's
insertion behavior that "reverses" the inserted elements.
[ChangeLog][QtCore][QHash] Added range constructor.
[ChangeLog][QtCore][QMultiHash] Added range constructor.
Change-Id: Icfd0d0afde27792e8439ed6df3e8774696b134d3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These methods give the first and last QDateTime values in the given
day, for a given time-zone or time-spec. These are usually the
relevant midnight, or the millisecond before, except when time-zone
transitions (typically DST changes) skip it, when care is needed to
select the right moment. Adapted some code to make use of the new
API, eliminating some old cruft from qdatetimeparser_p.h in the
process.
[ChangeLog][QtCore][QDate] Added startOfDay() and endOfDay() methods
to provide a QDateTime at the start and end of a given date, taking
account of any time skipped by transitions, e.g. a DST spring-forward,
which can lead to a day starting at 01:00 or ending just before 23:00.
Task-number: QTBUG-64485
Change-Id: I3dd7a34bedfbec8f8af00c43d13f50f99346ecd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In QCOMPARE, handle NaNs and infinities the way tests want them
handled, rather than by strict IEEE rules. In particular, if a test
expects NaN, this lets it treat that just like any other expected
value, despite NaN != NaN as float16 values. Likewise, format
infinities and NaNs specially in toString() so that they're reported
consistently.
Enable the qfloat16 tests that depend on this QCOMPARE() behavior.
Refise the testlib selftest's float test to test qfloat16 the same way
it tests float and double (and format the test the same way).
This is a follow-up to 37f617c405.
Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This extends support for qfloat16 sufficiently for the things testlib
needs in order to treat it as a first-class citizen. Extended tests
for qfloat to check qFpClassify() on it.
Change-Id: I906292afaf51cd9c94ba384ff5aaa855edd56da1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This shall make it more nearly a first-class numeric type; in
particular, I need some of these for testlib's comparing and
formatting of float16 to handle NaNs and infinities sensibly.
Change-Id: Ic894dd0eb3e05653cd7645ab496463e7a884dff8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Something nice we'd like to detect for array-backed containers
is if the iterator passed is a Contiguous one; if the type is also
trivially copyable / Q_PRIMITIVE_TYPE, we could memcpy() the whole
range.
However, there's no trait in the Standard to detect contiguous
iterators (the best approximation would be detecting if the iterator
is actually a pointer). Also, it's probably not smart to do the work
now for QVector since QVector needs refactoring anyhow, and this work
will be lost.
QString and QByteArray are left in another commit.
[ChangeLog][QtCore][QVector] Added range constructor.
[ChangeLog][QtCore][QVarLengthArray] Added range constructor.
[ChangeLog][QtCore][QList] Added range constructor.
[ChangeLog][QtCore][QStringList] Added range constructor.
[ChangeLog][QtCore][QLinkedList] Added range constructor.
[ChangeLog][QtCore][QSet] Added range constructor.
Change-Id: I220edb796053c9c4d31a6dbdc7efc5fc0f6678f9
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Add a test that checks for the Presence of Qt for Python
and runs Python compile tests on the baseline files.
Task-number: PYSIDE-797
Change-Id: I7e15c3c75261a7d94fc6654a95d49ba323cbe7d6
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Usually, when you load a plugin, you don't want to load just any plugin
that fulfills a given interface, but rather a specific one. When loading
dynamic plugins you can differentiate the plugins by file name. This
doesn't work in the static case, and file names are also separate from
the plugin metadata shipped inside the plugin files.
To solve this problem, different hacks have been developed in various
places. QML extension plugins add a special property "uri" via the -M
option of moc, QML debug plugins expect you to add a json file with
an array of "Keys", Qt Creator plugins have a "Name" in their json
files, etc.
By allowing the identifier for the plugin to be specified inline with
the metadata declaration we can make many of the above workarounds
obsolete and provide a clean way for users to find their plugins.
Task-number: QTBUG-74775
Change-Id: Ie2af16c49d4c5aa5a77fab0fae1e0a4449bd7a39
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Skip based on support for window activation instead of platform. Makes it clear
why the tests are skipped, and also enables them automatically if we implement
a shell extension that adds support for it.
Task-number: QTBUG-66849
Change-Id: I322aba5ce5f8db651db7b71f223ffacec037c920
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can be used to make smaller binaries, and possibly speed up ARGB32
rendering on some platforms.
Change-Id: I7647b197ba7a6582187cc9736b7e0d752bd5bee5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Extend the history by a persistent model index list
reflecting the selection.
[ChangeLog][QtWidgets][QFileDialog] The widgets-based dialog now
remembers the selected files when navigating the history
Fixes: QTBUG-71415
Change-Id: I86774439be070c1b922acd0e9a27d029f02f68d3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QTimer::singleShot is optimized for zero timeouts when using the API
taking a string method name. This optimization was not used for the API
taking a PMF or functor. This patch adds it, making the various API
calls behave similarly from a performance point of view.
The approach taken here requires a QObject context object. If none is
available, e.g. a nullptr was passed explicitly, or the
QTimer::singleShot(O, Functor) API was used, the optimization could
not easily be applied. This is not only bad from a performance POV,
but also poses as a potential source for heisenbugs: Using the
different API versions of QTimer::singleShot would use different code
paths internally, which then would not ensure the expected slot call
order. This problem actually existed already when mixing the
string-based slot syntax with PMF/functors in the QTimer::singleShot
API.
This patch overcomes this hurdle and fixes all of the above: When we
encounter a 0ms single shot timer, and no QObject context object is
available, we fall back to the main thread, or create a temporary
QObject for any other thread. The updated and extended benchmark
shows that this is still a significant performance improvement
over using a timer:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.48 msecs per iteration (total: 748, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
7.20 msecs per iteration (total: 720, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
6.79 msecs per iteration (total: 679, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
6.92 msecs per iteration (total: 693, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.34 msecs per iteration (total: 735, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.90 msecs per iteration (total: 690, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
7.46 msecs per iteration (total: 747, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
6.70 msecs per iteration (total: 671, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
13.75 msecs per iteration (total: 1,376, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
7.05 msecs per iteration (total: 706, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.70 msecs per iteration (total: 670, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
6.58 msecs per iteration (total: 658, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 20977ms
********* Finished testing of qtimer_vs_qmetaobject *********
Without the change to qtimer.cpp, the results are:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
112.84 msecs per iteration (total: 11,285, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
115.62 msecs per iteration (total: 11,563, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
110.81 msecs per iteration (total: 11,082, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.04 msecs per iteration (total: 704, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 746, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
118.42 msecs per iteration (total: 11,842, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
119.35 msecs per iteration (total: 11,936, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
130.96 msecs per iteration (total: 13,096, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
8.08 msecs per iteration (total: 808, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.79 msecs per iteration (total: 680, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
7.49 msecs per iteration (total: 749, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 153995ms
********* Finished testing of qtimer_vs_qmetaobject *********
Additionally, this patch adds a unit test to verify that the slot call
order for 0ms single shot timers is followed while mixing the various
API versions. It fails without this patch but passes now.
Finally, another test is added to verify that using QTimer::singleShot
before a QCoreApplication was constructed is still working properly.
Change-Id: I0d6211554b6198cb3e527be9ec3adc572b1b54ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Until now, QEasingCurve was not streaming all it's internal state.
Therefore, doing store/reload operation through QDataStream would not
yield the same curve as the original. This patch fixes it.
[ChangeLog][QtCore][QEasingCurve] QEasingCurve now properly streams all
the data needed to QDataStream.
Change-Id: I1619501f5b4237983c8c68e148745a5e58863f55
Fixes: QTBUG-68181
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Enum class are serialized using the declared size.
[ChangeLog][QtCore][QDataStream] Enumerations can now
be serialized through QDataStream without the need of
manually defining streaming operators.
Change-Id: Iae9a63eb62b5a5615b657766a3c4c66ba4d98d0e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Paolo Dastoli <paolo.dastoli@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Korean text, they typically can use both the "Western" style of
word wrapping, i.e. breaking on spaces, as well as the East-Asian
style of potentially breaking between all syllables. However,
the Unicode Line Breaking Algorithm, TR14 defaults to breaks on
syllables and specifies a possible tailoring where Hangul is
mapped to the AL class instead:
"When Korean uses SPACE for line breaking, the classes in rule
LB26, as well as characters of class ID, are often tailored to AL"
When using Qt, the user would expect the WordWrap wrap mode to
break between words in Korean. If you want the syllable-based
text layout, you would use WrapAnywhere, probably accompanied
by line justification.
To avoid breaking QTextBoundaryFinder and other potential clients
of QUnicodeTools which depend on getting the precise Unicode
data from the algorithm, we do this by passing a flag from
QTextEngine when initializing the attributes. This way, it
can also be made optional later on, if we decide there is
a reason to add an additional wrap mode specifically to
handle cases like this.
[ChangeLog][Important Behavioral Change] WrapWord now
correctly prefers line breaks between words in Korean text.
WrapAnywhere can still be used to get breaks between syllables
instead.
Done-with: Alexey Turitsyn <alexey.turitsyn@lge.com>
Task-number: QTBUG-47644
Change-Id: I37b45cea2995db7fc2b61e3a0cc681bbdc334678
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was never used or compiled, it has to be fine to add it :-)
Change-Id: If210c19515a545a6dbaef18a16dc018c0348070d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Various patterns seem to have been copied, notably counting time from
QTime(0, 0) rather than using QTime::msecsSinceStartOfDay() and its
setter. Unsuitable value types also put in an appearance, and
QTime()'s parameters after the first two default to 0 anyway.
Corrected a lie in QTime()'s default constructor doc; it does not work
the same as QTime(0, 0) at all.
Change-Id: Icf1a10052a049e68fd0f665958f36dbe75ac46d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The test was added as commented in 2012, before it was not even
mentioned in the pro file. I guess it was never run.
Change-Id: Ib787c7811ab4f7f32a99869167cde2e12dbe3156
Fixed the other tests that used the methods, so that they now get the
data from QLocale instead; and added the missing feature #if-ery, as
these are textdate methods.
Change-Id: I896f356bdf88037db23590c71d0aeb0b8722bfa7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The code had min and max of an integral type and tested min + min / 2,
which naturally overflowed, provoking a compiler warning. The test
was meant to be testing min - min / 2; but min is even, so this is
just min / 2; and doubling that won't overflow (which is what the test
is about). As it happens, min + min / 2 is in fact max - max / 2,
which *would* be a good value to test, since max is odd. So add a
test for that and remove the broken test.
Change-Id: Iec34acbf0d5d7993d41ff844875dc10480b8eb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Don't just wait for 300ms for the thread to finish, this can
lead to faling tests esp. on slow hardware.
Also fix a mem leak.
Change-Id: Ifa90da5507fc6d65ef77e368d7c238271623ff53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use move on the existing value as well so the constructor makes more
of a difference.
Change-Id: Iee2080da7b7d2d88eb108f0448c61423c7256979
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This benchmark was not compiled, and it only covered some parts of the
API. Enable it, and also measure the performance of PMF and Functor API
variants, for both QTimer::singleShot and QMetaObject::invokeMethod.
This uncovers that the zero-timeout optimization for the singleShot is
not applied to the PMF and Functor API variants:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.11.0, Qt 5.11.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.2.1 20171224)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
5.20 msecs per iteration (total: 520, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
75.93 msecs per iteration (total: 7,594, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
77.90 msecs per iteration (total: 7,790, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
76.23 msecs per iteration (total: 7,624, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
4.99 msecs per iteration (total: 499, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
5.37 msecs per iteration (total: 538, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
4.74 msecs per iteration (total: 474, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 9 passed, 0 failed, 0 skipped, 0 blacklisted, 50220ms
********* Finished testing of qtimer_vs_qmetaobject *********
Change-Id: I46336613188317124804638627f07eb135dc0286
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And export the required symbols in OpenSSL so we can run the test there
as well even if it's not needed for any functionality.
Change-Id: I4246d2b0bbdd42079d255f97f3c66ce8bb37390b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QSqlError::text() returns single space if QSqlError is not valid. In
addition, it adds space in case one of driverText or databaseText
is empty.
Change condition upon which space is added between databaseText and
driverText, and update unit test to cover these cases.
Fixes: QTBUG-74575
Change-Id: I52cce9b0287a523d7ff9059cff38bcd8b26eb303
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using a style that wants to draw into the layout's margin (like
macOS style does with group box titles), parts of the widgets would be
clipped by the parent if the available margin is smaller than necessary.
This moves the x/y coordinates to at least 0/0, and adjusts width and
height accordingly.
[ChangeLog][QtWidgets][QLayout] Prevent clipping of group box titles
on macOS (and similar styles that draw into layout margins)
Change-Id: I32148a92858c13fb2325da4d0a2a58996e0e8930
Fixes: QTBUG-67608
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
[ChangeLog][QtCore] Added support of deduction guides for QPair
Change-Id: I41a798390dc2c925b0f8432ba12aa345724de2d7
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
They are the only Qt symbols neither prefixed with q or with the Qt
namespace. This changes preserves source and binary compatibility
while making it possible to define conflicting symbols.
Change-Id: I6d4181206e63faa922fa0c8b644e0a4b88826a97
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is flaky which was uncovered by the upcoming
QTimer::singleShot optimization patches:
When the Emitter's thread is started and executes the timout functor
before the state machine is started, then the state machine will never
see the emitSignalWithNoArg signal and thus never transition to the
final state and finish.
This patch ensures that the code in the background thread is only run
after the state machine was started to fix this flakyness.
Change-Id: I6f91a2420165662ece75e550a6d73fe098137d4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initially TESTSERVER_COMPOSE_FILE could be manually specified.
Later this got removed by accident. Re-enable this feature.
Furthermore, check if a module has a platform-specific compose file. If
not, fall back to a default docker-compose.yml. This is useful to
include testserver.pri from other modules, where no platform-specific
requirements are present, ie the image from provisioning works on all
platforms.
Change-Id: Icb92552fd61196be332b2431ab0f8a43b9157fc8
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore][QVariant] Fixed a bug that caused isNull() to be
true after downcasting a QObject* payload using convert().
Fixes: QTBUG-73196
Change-Id: Ifda15952f873d7142c95609b69ac424bbf16b723
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A QCOMPARE(..., true) isn't much use; and failure would have set the
object's .errorString(), which seems like it'd be worth reporting, so
use QVERIFY2() instead.
Change-Id: I2f3f9379984694891de81d2ffebc696d91eec70f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rules of std don't permit us to add an overload for
fpclassify(qfloat16), so we need our own equivalent that we *can*
overload. Deploy it in the few places we use fpclassify().
Extended qnumeric's testing to cover qFpClassify().
Change-Id: Ie5a0a5cc24599d1571404c573d33c682b0d305a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Renamed the test, since it covers both, verified slightly more and
added checks that QCOMPARE() copes as intended. Fixed some minor
coding-style defects in the process.
Change-Id: I49c2ffa0568a29e9e4b7f7395d4cacdeb0401da0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While touching the code, deduplicate some methods.
Change-Id: I28f469f0e9ae000a34466b0ecc604b5f3bd09e63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moc now successfully parses enum values, that have been deprecated with
[[deprecated]]. This is valid c++17 and should be handled correctly.
By adding that functionality it is possible to parse Windows headers
which use this deprecation mechanism.
To make sure, that moc works correctly even on compilers that do not
support deprecated enum values yet, the auto test explicitly uses
[[deprecated]] enum values during moc run.
Fixes: QTBUG-74126
Change-Id: I7b9d9a49af6093a97f8fdb800ffbc5af3d54d262
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
qt_asciiToDouble accepts a length parameter, so we can just pass
that through. No need for explicitly null-terminating, which is
where the copy of the data would be made.
Change-Id: I4e7921541f03295a2fae6171b35157084ff3ed8c
Fixes: QTBUG-65748
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for SecureTransport backend. OpenSSL, while reading
RSA/DSA, is internally calling EVP_BytesToKey that
essentially does the same thing this patch does in
'deriveAesKey' and thus able to correctly decrypt
whatever it first encrypted (while generating/
encrypting keys).
Fixes: QTBUG-54422
Change-Id: Ia9f7599c5b19bf364c179f2abd2aab7ea5359a65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Given the current feature disparity, it makes sense to give our users
ability to detect if they can use some feature or not in their application
code, using our 'modern' QT_CONFIG(securetransport). Accordingly, use this
new syntax in our own auto-tests.
Change-Id: Ib33b03e7e602e9f8b0db8251377c89dbaada1049
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Add the path to expand the timestamp files as a parameter to doCompare()
and check that the file is found. It is then no longer necessary to change
the working directory in rcc().
- Fix the line number output in doCompare()
- Move helper readLinesFromFile() up and make the split mode a parameter so
that it can be used for reading files without stripping empty lines
- Remove the helper findExpectedFile() which apparently was meant to
introduce some version scheme in Qt 4.5 but was never continued.
Task-number: PYSIDE-855
Change-Id: I3d8cf957995fec8e34cddb4992fc8854148c7bdc
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Currently docker is only used for the "echo" test, and then only the
echo server. The SOCKS5 tests have been disabled from when our current
test server was new.
Change-Id: I21b0c5f10e722a42a0880b2500d1bcbc609a03bf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Separate waitForStarted() and waitForFinished() to properly
catch startup errors and kill hanging processes. Also check
exit status and code.
Task-number: PYSIDE-855
Change-Id: Ic8e623f4a8c716a2892767a8dbc06ba4ffb90b5a
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Iterate over a struct array rather than having a list of strings to
pull things out of, by individual index; this makes it easy to include
the non-existence check for directories in the same loop. In the
process, give the absolute-path tests a prefix to mirror the relative-
prefix on their partners. This prepares the way for adding more
test-cases.
Change-Id: Id839caedf92387dfa9b94f31253410285f72ff70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the test data path in a member variable.
Task-number: PYSIDE-855
Change-Id: Ibb81e4024c870e67e209c79ec95264e747632bc6
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: hjk <hjk@qt.io>
The QTest::qCompare() implementations were almost duplicates; pull the
common code out into a templated version. Tweaked the
QTest::toString() specialization for float and double (a macro) and
fixed a bous modifier in double's format.
The doubleComparisons and floatComparisons tests in the tst_float.cpp
selftest shared a large block of tests in common, aside from the
difference of type. Break this out into a templated static function
to save duplication.
This prepares the way for using the same templated code for qfloat16.
Change-Id: I2823fd006910c5ff88335d625d1fa05cb7753513
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check if QSslKey::handle() returns data representing the
same key information as that passed to the constructor.
Task-number: QTBUG-64495
Change-Id: I1a91264e6f6d92d259b51fca9de00fcbfd5cc845
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add a new signal textChanged(QString) as a replacement for
valueChanged(QString) so valueChanged(QString) can be removed with Qt6.
This removes the ambiguous valueChanged() signal and also matches the
'text' property naming.
Change-Id: I0676a7112f70add20a3a7ef9381268cd9b8a5851
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It's flaky and has been for a while. However it is somewhat more flaky
when using the docker setup.
Task-number: QTBUG-74162
Change-Id: I49f346a39271b48395e0e17fa6821d73a24f81d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To work with docker test server.
Change-Id: I50a1c7b632748d7648dafd70356aa849614e4e12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: Id456fa8ea6ab4f23b6b83c5f6388e96443ccf9e0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The iptables container launches with extra capabilities to actually be
able to make changes to the tables.
Change-Id: I892fd18853ce882709e21791e6c88217e5029d53
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This commit adds support for single-sign-on SPNEGO/Negotiate
authentication to QAuthenticator, using SSPI on Windows and GSSAPI on
other platforms (if KRB5 GSSAPI is available).
[ChangeLog][QtNetwork][QAuthenticator] Add support for SPNEGO/Negotiate
Task-number: QTBUG-4117
Change-Id: Ie246b887db3fd6201b7ed30b023feca292cd6530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace QGraphicsItemAnimation::matrixAt(qreal) with transformAt(qreal)
to avoid the usage of QMatrix which is deprecated.
Change-Id: Iafcdf8b9b2fbffffa61417601a3ae4272d0176c6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We can parse the namespaces in order to find the enums in them and
populate the related metaobjects of the current file's classes. The
symbol clashes are avoided by only generating metaobjects for namespaces
defined in the same file.
Fixes: QTBUG-71966
Fixes: QTBUG-72069
Change-Id: Ibdf21c3f9dae48d95b0952b3e220b4c29e30ecb8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
and make it work with our new docker-based test server
Change-Id: I98b5b5b1e2cdca46b7f15be72aa1483d9455403d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to removal of insignificant flag in
tst_qfilesystemmode.pro a bunch of tests will
either fail or crash in different operating systems.
Task-number: QTBUG-70572
Task-number: QTBUG-70573
Task-number: QTBUG-29403
Change-Id: I44925187acd72e600d2fec4f2604b67c66ecdd6b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
A widget being added to QMdiArea which currently has focus
did not trigger the subWindowActivated() signal
since the connection to the method _q_processWindowStateChanged, which
emits the signal (set up in appendChild()), was just done after
the focus was set back again to the added widget.
Setting the focus makes the widget active.
This patch changes the order: first call appendChild(), then set focus
Change-Id: I3aaf1728dc082d1323c7fbd62bfdbd2af87ab2ce
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Blacklisting did not work as blacklist should have contained osx
instead macos
Change-Id: Ifd76a38d371ccce545eb5df030aaa819b00a5b48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
1. Fix erroneous logic, which was triggered in 'h2' mode (non-TLS connection)
- after the initial protocol upgrade/POST request was handled, the server
(on Windows specifically) was erroneously handling upcoming DATA frames by replying
with another redirect response.
2. Make the test less heavy by sending 1 MB of Qt::Uninitialize instead of 10 MB
- theoretically this could cause a timeout before the redirected request finished
successfully.
Task-number: QTBUG-73873
Change-Id: I961e0a5f50252988edd46d0e73baf96ee22eef3f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
One of the tests was not added to the parent subdirectory pro so this
is also rectified.
Change-Id: I270f1c2882260e3e3fac83d074ed6444c5dece19
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In 3ccdeb4b58, we removed the
specialized multi font engine on Windows, causing us to go
through the same code path when loading fallbacks as on
other platforms.
When combined with 97f73e9577,
this caused an error, because the code in
QFontEngineMulti::loadEngine() only overrode the families
list, but not the singular family in the request. In the
QRawFont test, this would cause the requested fallback font
to correctly have "MS Shell Dlg2" as the only font in the
families list, but the request.family would still be
"QtBidiTestFont", the name of the main font. The singular family
in the request was preferred by the windows font database when
creating the LOGFONT. We would therefore load the latter for
the fallback as well and since it still does not support the
characters in question, we would continue searching.
Fixes: QTBUG-72836
Change-Id: I1787b57febcf6030d5c5b09bc2ef2c9558f05beb
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The QImage API can not handle images with more bytes per line than what
an integer can hold.
Fixes: QTBUG-73731
Fixes: QTBUG-73732
Change-Id: Ieed6fec7645661fd58d8d25335f806faaa1bb3e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As winrt does not have native windows, exposure check was just done by
checking, whether the window is the active window. If a window is shown
fullscreen though, winrtscreen will be resized. This resize triggers a
resize of every maximized or fullscreen window that is shown.
If we enter or leave full screen mode, we have to wait until the screen
resize and the subsequent window resizes are done and only then we can
consider the windows properly exposed.
This patch reverts 54bcb9d42f and thus
unblacklists tst_QGraphicsItem::cursor on WinRT.
Fixes: QTBUG-73545
Change-Id: If469fce319ed6b3a5d56b7bf3cbc11929b72bb11
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Prevent automatic insertion of line-breaks in blocks formatted with 'white-space:nowrap'.
This follows the example of white-space:pre.
Fixes: QTBUG-54787
Change-Id: If26f6a54106a02fe0e388947f6368ae4e86acf63
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some QSpinBox tests start failing after reverting to using legacy mouse
messages to handle mouse input in the Windows QPA. It seems to be caused
by a test that runs before it and moves the mouse cursor. Then when the
QSpinBox tests run, they create widgets that appear below the mouse
cursor, causing some mouse events to be generating and messing with the
events synthesized by the test itself. With the pointer messages being
used for mouse input, the legacy mouse messages that are generated under
this condition were being ignored. But by reverting to the old
implementation, the legacy messages are handled again, causing the test
to fail. This change moves the mouse pointer to a safe position during
the test initialization, so it does not depend on the state left by
previous tests. This change needs to be integrated together or before
the change in the windows QPA.
Change-Id: I91f7e9376dc495ee61250e0a7d908c1c2b685bc8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QFileDialog::setConfirmOverwrite()/confirmOverwrite()
- QFileDialog::setReadOnly()/isReadOnly()
Change-Id: I3cc1df76c8e40e95b8e9893ae06ef488fad26fb6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a modal dialog is called from a slot connected to the
editingFinished signal, the chain of events resulting from the focus
returning to this widget will make the editingFinished signal emitted
again. This patch uses a new variable to keep track of the fact that
there was a modification. Once editingFinished was emitted, that flag
is cleared so next time the signal will be emitted again only if a
modification was made to the line edit content.
[ChangeLog][QtWidget][QLineEdit] Behavior change: now the
editingFinished signal is emitted only once after the line edit content
was edited.
Fixes: QTBUG-40
Change-Id: Ia4760bad8717f1758c3939132c446b4b4c6cd498
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Now that MSVC (presumably) supports templates, we can merge the QRect
and QRegion versions of the functions into one.
The function has been renamed to invalidateBackingStore to better
reflect what it's doing.
Change-Id: I0e94a0cabd286cf97f2ba718a42ee0425f59d3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The silent and blacklisted selftests of testlib end in a qFatal(), to
test its messaging is handled correctly. However, this prevents hooks
in main() from saving coverage data when we're gathering that. So use
a transient signal handler that longjmp()s back to a setjmp() just
before the qFatal() to let the test complete normally (but, since
qFatal() does something different on MS-Win, don't apply this to it).
Note that testlib's internal FatalSignalHandler handles all fatal
signals *except* SIGABRT, so this isn't over-riding it. (In any case,
this restores the prior signal handler in setjmp()'s catch branch.)
Added missing expected_silent.tap test output while checking that this
change doesn't affect (the rest of) the test output.
Change-Id: I7e460581ad93e26639c066b3229438a66fd299de
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Still do a begin/end reset model in place, which is probably not the
best code but since it's a test and it works it should be enough
Change-Id: Iffaf8d69d5be64ef5e1e359e3d90a1e8174fc13b
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
to make it work with our new docker-based test server.
Change-Id: I76345a2d3d768b8a571f2c85e69f6a21e9a96d7e
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Test fails on minimal and offscreen platforms.
Task-number: QTBUG-73522
Task-number: QTQAINFRA-2630
Change-Id: I6260454be35a8bbac1ab683d89fb7b262d3b69ab
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Adn create that data structure on demand on the heap.
This reduces the size of QObjectPrivate if there are no
connections. If we have connections, it'll use the same
amount of allocations and memory as before.
Change-Id: I900f6980a2cd8a5f72c3ad18697b5dd49100217d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Measurements show that it's just almost as fast to simply query
the connectionlist directly and avoid both the memory
overhead of the bitfield and the associated bookkeeping.
For connected signals, the difference is not relevant at all.
With a signal that was never connected, removing the bitfield will
cause signal emission to be ~2.5% faster. And if you ever disconnect
from a signal, the bitfields might not be accurate and this can
cause a major slowdown.
Here are some numbers to validate this. All times are measured
in ms for 100M signal emissions:
without change with change
string based connect: 3817 3836
pointer based connect: 4552 4571
not connected: 493 479
disconnected: 2113 559
Change-Id: Ia2c85036afaa7f991b883c8ff812f69cf4580f7e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: hjk <hjk@qt.io>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds QColorSpace and QColorTransform classes,
and parsing of a common subset of ICC profiles
found in images, and also parses the ICC profiles
in PNG and JPEGs.
For backwards compatibility no automatic color
handling is done by this patch.
[ChangeLog][QtGui] A QColorSpace class has been added,
and color spaces are now parsed from PNG and JPEG images.
No automatic color space conversion is done however, and
applications must request it.
Change-Id: Ic09935f84640a716467fa3a9ed1e73c02daf3675
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 dev integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I255c0c10466cc9413ca41c756ebdb7c049511507
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 5.13 integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I3dcd963b1c5cea0b2197f1589398d8a9ed18f46f
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After the system reboots, the docker machine is created, but in a
stopped state. As stated in the docker docs, you might get errors when
attempting to connect to a machine or pull an image from Docker Hub.
For instance, Error checking TLS connection: ...
The solution is to regenerate TLS certificates of docker machine after
machine resums.
Change-Id: I8781ac0f0790aeda6cc778aee9c44d03c2b788d3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][SSL] The Schannel backend now supports ALPN and
thus HTTP/2.
Change-Id: I1819a936ec3c9e0118b9dad12681f791262d4db2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QTextFormat::setAnchorName()/anchorName()
- QTextList::isEmpty()
Change-Id: Ic1f5317980d116c846def3645d2a6cd61ba8679d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Windows and macOS, the containers are deployed into a virtual
machine using the host network. All the containers share the same
hostname (qt-test-server), and they are connected to the same network
domain (local).
When running test in such platforms, use the single-name SSL certificate
(qt-test-server.local) for SSL related tests.
Change-Id: Idf33e01e8dd8814510d848b87b59b5fc0edc903e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QItemDelegate::comboBox() is flaky because sometimes the used
QTableWidget does not yet have the focus which prevents a correct
editing. Fix it by explictily setting the focus on the widget after it
is shown.
A similar fix was added for dateTimeEditor() in
9822d57d85.
With this patch the test no longer fails for my on opensuse, therefore
remove the blacklisting.
Task-number: QTBUG-67282
Change-Id: I907db662ca347f8e8d31e5be215a100377b159ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
