The base class has a virtual destructor, so the destructor is already
virtual. Make it non-implicit so that the virtual table and other
virtual inline methods don't get emitted everywhere.
Change-Id: I15296c1114086ff0b1da701ccd51525bec99d76b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This must have been a mistake. IA-64 processors used to contain an
IA-32 core, which supported SSE2. However, the IA-64 mode supported no
such thing.
Change-Id: I731c6018166af6b897cb697c68aad4ef3ae93132
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
permits relocatable qmake installations in, say, $sysroot/hosttools/.
note that it makes patently no sense to have a relative Prefix when
using a relative Sysroot.
Change-Id: I36e5149acb20a885c3cd244bc9d67aa48b01a56f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed for backwards-compatibility, and generally makes sense.
Task-number: QTBUG-24839
Change-Id: I42b008a9dfb43cc2ebe49c8baa2c29f5d6a75897
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This completes 6c98fd2, for systems where default codec is not UTF8.
Change-Id: I94795785d5d172558c40c06bd3ef4ffaba1624c5
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Previously the primary sceen number wasn't stripped before adding the
actual screen number, resulting in names such as ":0.0.0".
Change-Id: Ifbcf12dcf1c200fd6bc5e4b95a5d82483957e0d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Serializing an empty object path was crashing with
> arguments to dbus_message_iter_append_basic() were incorrect,
> assertion "_dbus_check_is_valid_path (*string_p)" failed in file
> dbus-message.c line 2555.
Thiago says this depends on the libdbus build settings, which is why
it didn't happen to everyone. OpenSUSE-12.1 here.
Change-Id: I657d28d5d915706a22abfd273aad88d20e2d112a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
It was only implemented on Mac OSX until now (all this came from the
QDesktopServices code).
Change-Id: I7fd81d80ca77cf0ca6c213f59813a6163abe7dc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code was only allocating memory for the next insertion
leading to a reallocation of the whole data for every
single insertion.
The code now reserves some space and uses a decent growth
strategy to avoid repeated reallocs.
Change-Id: I48b0feab71ba8ca73e7037f8460080f198b2f009
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Include linux.conf instead of unix.conf, so it can compile Qt Base
these days (otherwise, we get an error from wayland-scanner.prf).
Remove the outdated information from the header. The mkspec now
matches ICC 12, not 10 and there are more diagnostics we disable.
Change-Id: Ic75593759a4d53f859a9a9e919d77b5c52d01024
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Implement QPointer in terms of QPointerBase,
a non-template roughly the same as
QPointer<QObject>, to reduce the amount of
template code being generated.
Also mark QPointer as movable, fake an
isNull() for qdoc, and remove qpointer.h's
content from QT_NO_QOBJECT builds (some
indirect include hits the missing
QWeakPointer(QObject*) constructor when
bootstrapping; worked before b/c QPointer
is a template; QPointerBase isn't, though).
Change-Id: I657826601f570f954d80b84bb0334dd3a7452859
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor from polling in an endless loop running in a separate thread
to using a QSocketNotifier working on the main thread.
Similar to "de-threading" of the navigator event handling in
9dc86ac0f2
Change-Id: I994dceed07312a3846737c8bea34cffa4ab408f1
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Manual merge of the original fix 1ef309e9 in the Qt 4.8 repo.
Task-number: QTBUG-20480
Change-Id: Id08500c2dd16965af3942e65cff1f4afa24180b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
General changes:
const, scope, braces, hash[] for clarity, comment wording and
spelling.
QSqlRelationalTableModel::selectStatement() readability:
Renamed private method.
QVector<Class>.value() already defaults to null object value, so there
is no point in handling this case explicitly.
Alias rec for d->rec added more noise than clarity.
Using "tables" list only adds an extra step. Simple concatenation does
the trick.
Deduplicate code for building table expression and JOIN condition.
Change-Id: Ia52afaf3c3937a26595d5ae867982664002562d8
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Deprecate the old API for now as not to break existing usages.
Change-Id: I7abbbbe8a34951282537a9d74cded03743f44df7
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Focus change happen as: FocusAboutToChange event -> focus change
-> FocusOut event -> FocusIn event.
Input method need to have focus when calling commit(). Notification
on focus about to be lost allows QWindow implementations to commit in
time.
Also changes QWidget documentation to match code reality.
Change-Id: I17a8a374a33dd700909f79e370b42348869261a6
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Change-Id: I7903d9664d52c6afeff800a95062c983a49703c6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The const version should be enough.
Change-Id: Ia9cfa484f070e318c76f03df8d8220217a7100c2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
EGLFS and QNX both reference this symbol, hence it needs to be exported
Change-Id: I11b2b8ad5f2b81d951173f7cd8a7fbb8be4bb89b
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The parser makes the default language en_US, and no mimetype xml says
<comment xml:lang="C">, so use the en_US string for the C locale,
rather than returning an empty string.
Change-Id: Iad7c142e8078abe357773249416e7ce9b3e29a92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ApplicationsLocation and DataLocation were returning only the local path,
rather than system paths + local path.
Change-Id: I653d14e5bbe1e08c5fa1ecd5a6106336d1cd0369
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, it crashes if you simply set the same proxy factory instance
twice.
Change-Id: I4b1f1d0eed7630c9a145c0a330c6be1b3fc381e5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Make sure that if ShowAlphaChannel option is set then also setShowsAlpha
needs to be set for the panel before setting the current color, otherwise
alpha channel value is omitted.
Task-number: QTBUG-24320
Change-Id: Ifb3822711af8ffd0cf6cb4c8aab2b0020d296663
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
According to new module name convention, QtXmlPatterns is
replaced with Qt XML Patterns in all documentation.
Task-number: QTBUG-24775
Change-Id: I9ca85728e266bd1ca9fa7a14e5e68c43c8d3e826
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Only swap width/height of initial geometry if orthogonal to initial
rotation not orthogonal to current rotation
Change-Id: I825954e98dee6c0d07a284307dfb8e1f9fd538e6
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
We are running out of type ids for built-in types, 255 is not enough.
QMetaType already contains about ~70 types, situation is maybe not
tragic now, but there is a great chance that we will want to add more
built-in types from different modules like jsondb or declarative. Then
it might be tight, because we are not allowed to reorganize type ids
(it would be a binary incompatible change).
This change was not possible up to now. Old moc generated code assumes
that type id can be safely stored in 8 bits.
This is source compatible change.
Change-Id: Iec600adf6b6196a9f3f06ca6d865911084390cc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Since change 2e4d8f67a8 the need for Map and Unmap events has
gone away, as now the Expose event is used to notify the application
about when it can start rendering.
The Map and Unmap events weren't really used except by QWidget to set
the WA_Mapped flag, which we now set based on the expose / unexpose.
Also guarantee that a Resize event is always sent before the first
Expose, by re-introducing an asynchronous expose event handler. Since
an expose is required before rendering to a QWindow, show a warning if
QOpenGLContext::swapBuffers() or QBackingStore::flush() if called on a
window that has not received its first expose.
Change-Id: Ia6b609aa275d5b463b5011a96f2fd9bbe52e9bc4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
As it is a static library, it is also necessary to link to
QtPrintSupport when using QtPlatformSupport.
Change-Id: Id7ed458e5a7a0f6199d76b12f979faabb51d0f87
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Display the actual file and line where the Q_ASSERT statement
was triggered.
Change-Id: I54d72f4c4bd9edee744c0f6e08f31b8e3120f454
Reviewed-by: David Faure <faure@kde.org>
\since 5.0 has been add to the class section, so member functions and
properties donot need this any more.
see SHA: 5728c8a8e7
Change-Id: I4e67461373dda99ee1fbfdeb6477fde1dcfec116
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
- Fixed path was failing to find sub program.
Change-Id: I86f1a6941e244c9bc25ad0441cc7a441607560b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed installTestHelperApp() to use OUT_PWD path to find files.
(was looking in source tree instead of build)
Change-Id: If795c17a76aebcfbbe0d4f84c5df784a255ddb19
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For Qt5 we no longer want to support the older revisions due to the
dual codepaths that must be maintained, and because the format of the
meta-object data is quite different in revision 7.
The dual codepaths have been replaced by asserts that indicate the
revision in which the feature was introduced, and the older-revision
fallbacks have been removed.
It's not possible to build code generated by moc that has
revision <= 6 with Qt5 because the type of the
QMetaObject::stringdata member changed from const char * to const
QByteArrayData *. For the same reason it's not possible to build a
dynamic meta-object generator targeting revision <= 6 with Qt5.
Hence, too old meta-objects will be caught at compile time, and the
code will have to be ported to generate revision 7 (e.g., by running
Qt5's moc on the original class declaration).
Change-Id: I33f05878a2d3ee3de53fc7009f7a367f55c25e36
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Added toByteArray() and fromByteArray() benchmark tests.
Performance tests to measure QVariantMap to bytearray
and bytearray to QVariantMap.
Use case: Interprocess communications via local socket
Change-Id: If5e94ff870890b2ebb665f3cc38f5c33b34547f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
-updated both QDoc manual and QDoc guide
-"QML element" and "QML component" should be "QML type"
Change-Id: Ib2a0e8baa9087a04d35c05bbbd35852da10faf42
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
The .pageindex file was generated for the search engine on the
doc.qt.nokia.com website, since this website is not used anymore there
is no use for the .pageindex file.
Task-number: QTBUG-24911
Change-Id: Ie74f569ce881ab383d83ac9c5a8bc223da91564a
Reviewed-by: Martin Smith <martin.smith@nokia.com>
