Automatically set compilers based on old mkspec style target
Pick-to: 6.2
Change-Id: I80404376964a85c6b519657c054d008da47aed91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In commit 287ace562e, part of this test
was suppressed without filing a Jira ticket (or, at least, without
recording it in the QSKIP message). Since it's a known failure, it
should at least be a QEXPECT_FAIL, not a QSKIP. Since only some of the
subsequent parts of the test fail, I used QEXPECT_FAIL(,,Continue) on
each of the failing tests.
Task-number: QTBUG-94450
Change-Id: Iebc6801210c289b4502e59116e71d5901b71aa46
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Its collation (and everything locale-related) is only supported during
the lifetime of QApplication.
Change-Id: Ide97795664d45768e66248d47c3b1da83935b0d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Various QDateTime tests relating to transitions
* used a nomenclature that made them confusing to thing about; and
* expected identically-initiallized variables to behave differently.
The latter, naturally, lead to "expected fail" tests.
Rewrote the tests to get the date-times they want to test at by means
that avoid the ambiguities inherent in QDateTime's lack of a way to
distinguish the two passes through the repeated hour in a fall-back
(QTBUG-79923) and added commented-out tests indicating what should be
true once that ambiguity is resolved. Verified the DST status is as
expected in the cases where that's the correct distinction between
date-times with the same date and time. Renamed various things to
(hopefully) make them more intelligible.
In the process, purged some leading 0s from numbers in code.
Fixes: QTBUG-68936
Change-Id: Id7a348995238b70dcb81a96edb8a3fa5315f86fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test failed when checking for a pre-condition of the tested scenario,
so skip the test if that condition isn't met, as the test won't test
anything.
Amends b1fdcc8c0f.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-64543
Change-Id: I135cd5b45efcae111305b9be338eb5429d3b97d5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This fixes the "Command line is too long" error when building a project
with many object files for WASM on Windows.
Fixes: QTBUG-94032
Pick-to: 6.2 6.1 5.15
Change-Id: I29251da9795b267c968da86617da0311bf882a64
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
The tool used QCoreApplication::translate(), but did not attempt
to load a QTranslator. Use QStringLiteral() instead.
Pick-to: 6.2
Task-number: QTBUG-75870
Change-Id: Ib3c6b1893889a82b186a310c0c725dbf1a1885b3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
There are multiple macros used to get/check and return with error
in case the requested object is not valid. These macros are defined
in multiple places and duplicated. This patch defines them in one place
and then they can be reused.
This macro expects a "char m_qtTag[]" variable to be defined in
the scope where the macro is used. That variable is used as a tag
for the error message printed when an error occur.
Another consecutive patch use the new macros over qtbase code.
Pick-to: 6.2
Change-Id: Ibb8558d1229cec6dad9ec9da6e2635ea54fd18d6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This change allows temporarily removing the EXTERNAL_BUILD option in
a qt repo examples project to check how the examples behave in a
non-external project build, without forcing the developer to use a
prefix build.
Useful to compare behavior until we've ported over prefix builds to
use EXTERNAL_BUILD.
Amends d97fd7af2b
Change-Id: I29b834bb5f00e1e93966caae6f816faedba76b76
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move QT_END_NAMESPACE macro out of the #ifdef definition
Pick-to: 6.2 6.1 5.15
Change-Id: I26b4e263b5ae0acebf035dbfe8c7e287cd740190
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It may change in the future.
Change-Id: If65bf690b12d4e6474557d7a48567941b18413bf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clazy warns about the fromUtf8() call with a constant argument, for
every use of the macro, so hide the stuff behind a compiler firewall.
Also fix the format injection error by using QLatin1String::arg()
instead of QString::arg() chaining.
Change-Id: I4bb4d4af56443540efc0c38c75819aa152a441fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also, a minor clean-up: isMatchingHostname() overload
was never used, deleted (and it could not be used safely,
since it requires the name to be normalized first).
The file (qtlsbackend.cpp) was re-shuffled, to have
backend on top of the classes which this backend
is factory for.
Pick-to: 6.2
Pick-to: 6.1
Fixes: QTBUG-91929
Change-Id: I435c69b167f57f7c3f76e34449c52f665dc6f7c2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This makes qt_internal_disable_find_package_global_promotion available,
which is needed when linking against QtMultimedia in a static build
Pick-to: 6.2
Change-Id: I9b8f6d7b74a8693ac471f8a280e893f4da80a44b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's no longer used today.
And while we're at it: delete or fix typos in some nearby comments
Change-Id: Ib52268eeb936e71d6c09aece2e0833b99309ef2d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
SETTINGS for max concurrect number of streams is 'one direction' - this
is how our peer conveys the possible number of streams _we_ can open,
not _them_. If they choose to have it unlimited - let it be so.
It's possible to send 0 as maximum number, also, it's possible to
reduce the maximum compared to initial at some point - then I have
to avoid integer overflows.
Pick-to: 6.2
Pick-to: 6.1
Pick-to: 5.15
Fixes: QTBUG-94470
Change-Id: Ia02247acbaedd70998a4cab02082ba10f45cf78c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously they all returned the runtime versions and one string
function did not include the backend's name.
The NTDDI_VERSION macro is what we use to base certain
feature-availability on during compilation so it makes the most sense to
use for the build-string.
Pick-to: 6.2
Change-Id: I96b025a5a05c0bbb4db3d5ee68656e0df5f4eb07
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QByteArray creates copies of data, but we usually don't need the copy
and a view, for comparison or fetching substrings, is enough. So instead
we use QBAView and QLatin1String (when we need to go through
QStringTokenizer).
Change-Id: I12e0bd8777fc63f676b9371abfd345fab1046c44
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
...if changed after the widget is shown.
Just documents the current state of things.
Task-number: QTBUG-60822
Task-number: QTBUG-59126
Pick-to: 6.2 6.1
Change-Id: If8281dce4457707a1673aca7a50744d8b231b030
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use integral consts instead of enums for algorithm constants;
handle QChar::Decomposition as such, rather than as an int;
pass QChar pointers to cut down on reinterpret_cast<>s;
use char32_t instead of uint for UCS4.
Change-Id: Ia535128602065392a1b46fbb0a81572026be5d00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test uses a 64-unit array and deliberately clears various portions
of it, provoking a gcc warning:
warning: ‘memset’ used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
The calls to memset() do, in fact, have a sizeof(T) factor in their
size. Suppress this warning for the duration of that test.
Change-Id: I7d144d655a75f5ef4449fa3b956f80bcc509a83b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A mouse press that transfers focus from an open editor back to the view
will close the editor. To prevent that the corresponding release then
opens the same editor again we need to know that the closeEditor call
was caused by the mouse press. Since Qt first generates the focusOut
event, and then delivers the mouse press, we have to start a zero-timer
to check whether we are in the same event delivery process. If so, ignore
the corresponding release.
Add test case that simulates that chain of events.
Fixes: QTBUG-20456
Pick-to: 6.2 6.1
Change-Id: I28fa32bfbc776db207c594c329961f575ae58ea9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Since massageAdjustedDateTime() has to split LocalTime from TimeZone
and call {local,zone}MSecsToEpochMSecs() in any case, its call to
refreshZonedDateTime(), via checkValidDateTime(), was duplicating that
work uselessly. So handle UTC and offset-from-UTC separately with a
call to refreshSimple and handle local/zone time by inlining what
remains of refreshZonedDateTime() aside from the duplication.
At the same time, recent reworking of qt_mktime() make
localMSecsToEpochMSecs() handle its DST-hint the same way
zoneMSecsToEpochMSecs() has long done so, to take care of the intended
handling of DST gaps and repeats.
Change-Id: Id6bef7dd0f8983c3e923f4580a62a76aa6fcb810
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
After 79fd1cb2c6 the methods for running
QtConcurrent algorithms in the blocking mode aren't used anymore. Since
ThreadEngineBase and ThreadEngineStarter classes aren't meant to be used
externally, it should be fine to remove startBlocking() methods now.
Removed the unused code and adjusted the tests accordingly.
Change-Id: Ifb13820ce207869d6f720bcb5be8d35bb355fe33
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
qtbase\src\corelib\thread\qfutureinterface_p.h(180): error C2039: 'setException': is not a member of 'QtPrivate::ExceptionStore'
qtbase\src\corelib\thread\qexception.h(109): note: see declaration of 'QtPrivate::ExceptionStore'
Change-Id: Id746b87af3f88d91c473f6a3d986dc0f022dfa2f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
We updated to v39 in 6235893d54
Task-number: QTBUG-94410
Pick-to: 6.2 6.1 5.15
Change-Id: I73d539d677c9066dc5ceb6b4fc65fb544f39ac7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove a conflicting definition of the same operator from
qrhi.cpp. Who knows how many ODR violations this hidden gem may have
caused...
[ChangeLog][QtCore][QDebug] Can now stream QVarLengthArray objects.
[ChangeLog][QtCore][QVarLengthArray] Can now be output via QDebug
streaming.
Change-Id: I12f7670e32029fa8c96b446e9a98ebf3b9732d0d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It's deprecated. Port some unnamed enumerations (used only to
declare constants) to constexpr integers instead. Apply qToUnderlying
as needed.
Task-number: QTBUG-94059
Change-Id: Ifaa64ece966ce08df40dc71ffcfa7ac038110e0b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both code paths (write() for the main thread and waitCallback() for
the worker thread) use the same logic when processing write results.
To avoid code duplication, consolidate the common part for both threads
in the startAsyncWriteLocked() function.
Change-Id: Ie2663b2ed221e2797a1ecbdb3fcee0ee8f030cc0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
One link was wrong. Also, the %VERSION%/%SHORTVERSION%
syntax seem to be some leftover from pre-git times?
All in all, I doubt the need for this file.
Pick-to: 6.1 6.2
Change-Id: I52e93b056d17e05831f97d6c34232b3265accba7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit c686e885c0
and commit d64abf8166.
We don't feature .qmake.cache/.qmake.super files anymore in the
source directory, so there's no problem anymore.
Change-Id: Ib820a109fbfbad70d85b0f14ef72915882217ca3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Some of the data members related to progress reporting (min, max and
text) aren't used when user doesn't want manual progress reporting, so
the data for them can be allocated on demand, when the user explicitly
sets them. Note, that we still need to always create other related data
(current value and progress timer), since in the non-manual mode
progress is still reported by incrementing the current value each time
a new result is reported.
Task-number: QTBUG-92045
Change-Id: I1e5bd17de2613a6ea72ccff0029812f67686708b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QFuture doesn't need both at the same time, calling QFuture::result(s)
either returns a result or throws an exception. Store result and
exception stores in a union, to reduce the memory.
Also added a note for making the ResultStoreBase destructor non-virtual
in Qt 7.
Task-number: QTBUG-92045
Change-Id: I7f0ac03804d19cc67c1a1466c7a1365219768a14
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A follow-up to 6ec3321875 where the
function was optimized using a hand-rolled lazy-split on a QBAView.
Now that QLatin1String::indexOf(QLatin1String) has been optimized we can
use QStringTokenizer instead.
Change-Id: I30b15d309e7c364c0a4dafe31651b39ea14db7e5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Removing flags based on REGEX may include spaces, so flags might be
glued. Replace flags with spaces to keep at least one space for
the described case.
Pick-to: 6.2 6.1
Fixes: QTBUG-94400
Change-Id: Ice268da36174ef5cf4398d2aee8fcd4731336316
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
