For IPv6 addresses don't call toAce as it returns the empty string.
We should reflect the behavior of browsers here, which all accept
cookies from IPv6 addresses.
Original-patch-by: David Tapuska <dtapuska@blackberry.com>
Task-number: QTBUG-35022
Change-Id: Ic00369e923d044ec459822b2405865c13e4185b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If the domain is an IP address, we should not do any magic regarding
leading dots etc.
Task-number: QTBUG-35022
Change-Id: I7722de4e6027666dde27e9e37b6353e3da775d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is only possible for two important reasons:
1) QString and QByteArray d pointers are both done with QArrayData and
that class does not care that the alignof(T) changes from 2 to 1,
so we can give the pointer from QString to QByteArray
(after adapting the allocated size, which is now double)
2) conversion from UTF16 to Latin1 always has fewer bytes (exactly half)
Change-Id: I17b2690c910f3de8db55156c6d6b5f55be06d827
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test used a member testWidget that was cleared and reset after each
test, which caused focus fights and side effects. The widget is now
created and shown only when necessary.
Change-Id: I0dc635e9d4cdf4f899994b88206bb0125526f6df
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Assume an unrelated class that declares an enum and uses Q_ENUMS. Consider
then a class that uses UnrelatedClass::Enum as a Q_PROPERTY. We used to
include UnrelatedClass in the primary class's related meta objects, in order
to support use-cases like
obj->setProperty("enumProperty", "ValueOfEnumAsString");
If however moc happens to see Q_DECLARE_METATYPE(UnrelatedClass::Enum), then it
would exclude it from the related meta objects, which would silently break the
string based enum value conversion. This was meant as an optimization, but it
isn't apparent to the developer why sometimes the string conversion would
work and sometimes not (depending on whether somebody declares that macro).
This also becomes visible in QML, which relies on the same embedded type
information for enum assignments.
This patch removes that check in moc's code generator and cleans up the code a
little. However always including the prefix of Q_PROPERTY(SomePrefix::Enum ...)
is not correct either, because it may be that SomePrefix is a namespace, which
would cause compilation issues. Therefore we limit the inclusion of related
meta objects only to Q_OBJECT decorated classes the moc has seen, and for these
we save the fully qualified name in the related meta objects array (for QTBUG-2151).
While this patch makes the previous workaround for namespace issues by using a
Q_DECLARE_METATYPE not workable anymore, by saving the fully qualified name we
are making a hopefully sufficient effort to not require a workaround in the
first place. There's always the new workaround of fully qualifying the type in
Q_PROPERTY.
One side-effect of this change is that in the autoPropertyMetaTypeRegistration
test of tst_moc, the CustomQObject for Q_PROPERTY(CustomQObject::Number
enumValue ...) is now a related meta object, and therefore when querying for
the type of this property via QMetaProperty::userType(), we are now aware of
this being an enum and try to resolve CustomQObject::Number via
QMetaType::type(qualfiedName). As there is no guarantee for this to succeed, we
must now also do what is done in the non-enum code path in ::userType(), which
is to call the moc generated type registration function.
Task-number: QTBUG-33577
Task-number: QTBUG-2151
Change-Id: Ibf20e7421cba464c558a25c76a7e1eef002c6cff
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
[ChangeLog][QtWidgets][QLineEdit] A blinking cursor in the middle
over horizontally centered placeholder text looks bad. Thus,
horizontally centered content is now considered as an exception
and the placeholder text is hidden when the line edit is focused.
Task-number: QTBUG-31669
Change-Id: I17aa1e6656673f81545a8437f90814b188ad484a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_QObject is getting big, so make a separate test for QSignalBlocker,
but leave parts of signalsBlocked() in tst_QObject as that seemed to
have been the only check for blockSignals(true) actually blocking signal
emission.
Change-Id: I1cfac035e0e39203eea8626d43f316cc6244ee86
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When QSignalBlocker was reviewed, move semantics were asked for.
This patch add them.
This makes QSignalBlocker usable as a by-value argument (to transfer
control of signal blocking into a function) as well as as a return
value (to transfer control of signal blocking out of a function).
Change-Id: I714aa2a283bb33dba76e860649e88ed202e913c5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Attempt to fix
FAIL! : tst_QAbstractItemView::task200665_itemEntered() Compared values are not the same
Actual (spy.count()): 0
Expected (1) : 1
Loc: [tst_qabstractitemview.cpp(1292)]
which might have been introduced by removing the absolute qWait(200) in favor
of qWaitForWindowExposed() in afe8e368, so trying to compensate with a
QTRY_COMPARE.
Change-Id: Id437acd810b54e005daaf66ffffd4dd586075ab6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
To be able to call SetNamedPipeHandleState on stdin in a child
process, we must create a read-end pipe handle with the
FILE_WRITE_ATTRIBUTES flag set.
This can't be done with CreateNamedPipe but only with CreateFile.
Therefore we're creating the handles for the child process always
with CreateFile now. Besides, it's conceptually cleaner to have the
server handle of the named pipe in the calling process.
[ChangeLog][QtCore][Windows] Fix regression from Qt4 in QProcess.
It wasn't possible anymore to alter pipe modes of stdin in child
processes.
Task-number: QTBUG-35357
Change-Id: I85f09753d0c924bdc8a6cef1ea5dbe6b2299c604
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Press and hold is an interaction available on many platforms,
particularly when touch is involved. In Qt Quick this is exposed to the
user via MouseArea::onPressAndHold. This value should not be hard-coded,
but rather use a platform-specified default. This commit adds the
low-level hooks necessary for that to happen.
Task-number: QTBUG-24793
Change-Id: I621a8ac9de66b881e34336228056bffbb6306a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
... because they fail on the new test server. This commit can be
reverted once the Socks5 socket engine is fixed.
Task-number: QTBUG-35490
Change-Id: I85635d4b44d26168d40a56b7a121693297564f0f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
... because it was used to operate a man-in-the-middle proxy.
Task-number: QTBUG-35474
Change-Id: Ic7f19708b278b866e4f06533cbd84e0ff43357e9
Reviewed-by: Richard J. Moore <rich@kde.org>
It's still a relocation, but at least it can be marked read-only
after the relocation run, if indeed the dynamic linker goes to
such a length.
Change-Id: Ibadddac3ab99d2e58cc32cfd57311bddd3bdb0ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
d3dcompiler_qt is a DLL for use with ANGLE which replaces d3dcompiler_XX
at runtime to proxy shader compilation calls. This is useful for:
- Loading the newest D3D compiler DLL found, instead of loading the
version specified when Qt was compiled
- Reporting better debug information when the compiler cannot be loaded
- Caching shader blobs for later use
- Returning cached shader blobs
- Deferring compilation to another mechanism, such as a D3D compilation
service running on a host debugging machine *
The above use cases are especially important for Windows Store apps, as
they are not allowed to ship the d3dcompiler. On Windows Phone, where
there is no runtime compiler, this is essential for handling QtQuick apps
which require runtime shader compilation.
* This requires a separate service which monitors a directory for shader
source files, compiles these files into D3D bytecode, and places
the bytecode in the qtd3dcompiler cache directory. This directory is
monitored by qtd3dcompiler, which is then able to then load the blob.
Change-Id: I9889c8d66d2ddbe5a7a1dc44bfe5d8ad229b0e43
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QHash::key() is O(n) and we're calling it n times. That can make repeated
calls to the meta object builder very slow, as for example QQmlPropertyMap
when inserting properties repeatedly.
Fortunately this is easy to fix, as the value in the hash map is also the
index, so we can simply iterate over the hash once. With the exception of
the class name, which we have to treat specially to ensure that it is always
the first entry in the string table.
Task-number: QTBUG-32720
Change-Id: Ic954c45c454107feee83216131f601cc69d4c63b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Brings Windows QPA on par with other platforms.
[ChangeLog][Windows] Don't cover the taskbar when maximizing
frameless windows.
Task-number: QTBUG-8361
Change-Id: Iba35132f697cb7379650a4c883b616c5c2023d4c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will break network paths passed as command line arguments.
Introduced by 4ff6951550 .
Task-number: QTBUG-35432
Task-number: QTBUG-30628
Change-Id: Ice9ce15275ef69e9e9e82daf5a303e7c56294368
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Make
QCommandLineParser::add{Help,Version}Option()
QCommandLineOption::setDefaultValue()
QCommandLineOptionPrivate::setNames()
have transaction semantics: either they succeed, or they change nothing.
It's trivial to provide this guarantee, so do it.
Add a test for the surprising property that setDefaultValue("") resets
defaultValues() to an empty QStringList instead of one that contains
the empty string.
Change-Id: I61623019de3c7d2e52c24f42cc2e23ec5fddc4da
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix isValidId() which was failing valid IDs because it was splitting
name parts by \ instead of /. it was also rejecting offset from UTC
formats names. Add unit tests.
Task-number: QTBUG-35025
Change-Id: I4d23d2e54f4a9fac9afcc4eff0a02d6f4af21385
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code was there to do it, but it was using minimumValue instead of
maximumValue to test if the '+' should be allowed.
Task-number: QTBUG-20691
[ChangeLog][QtWidgets][QSpinBox] Entering positive values with the '+'
prefix is now allowed.
Change-Id: Iff62d073e350dc9a33b7e06e4b492048c74437c4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The abstractions are needed so that they can work with both
QGraphicsLayouts and QtQuick.Layouts.
Since the plan is to move the engine to QtGui, this means that the
engine cannot have any references to anything in the QtWidgets module.
As a consequence of that several things had to be done:
* The style info object had to be redone with an abstraction layer
to get rid of style and widget dependency. (Abstract class is
called QAbstractLayoutStyleInfo)
* QGridLayoutEngine must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngine.
* QGridLayoutItem must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngineItem.
Did also some minor cleanups, reordered arguments so that all styleInfo
arguments are last in all function calls
This also fixes QTBUG-35099 (bug was spotted during this refactoring)
Task-number: QTBUG-35099
Change-Id: If49d40f71870dc8d99d2e145be158e3080b595fa
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
(same thing for center- and delimiter-aligned tabs)
The width of the inline object wasn't taken into account, the code in
QTextEngine::calculateTabWidth only looked at glyph widths.
Change-Id: I303a6561c67870ff2094a685698e642fc1b53b12
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
A QMenu with no actions gets a size of (0, 0) on OS X.
With the new stricter expose event behavior this
is considered invalid geometry and the platform plugin
won't send an expose event, causing the qWaitForWindowExposed
test to fail.
Add a menu entry since the layoutDirection test is
not really interested in testing the special case of
empty menus.
Change-Id: I5221dc3f0472ac13edf821df08bacc3a4eb5cd9d
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Take longer search strings into account instead of just using the first
character of the search string.
Touches up https://qt.gitorious.org/qt/qt/merge_requests/1418 for
resubmission.
Task-number: QTBUG-3032
[ChangeLog][QtWidgets][QSpinBox] Fixed keyboard selection with
multiple-character strings.
Change-Id: I2f68c8b97b1a1884659dcb19f52b1efeace9b88b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When comparing expected with actual debug messages, allow the expected
ones to contain a trailing space. This is needed to not break all
autotests in a follow up patch, which will prevent ~QDebug() from
generating a trailing space by default.
Task-number: QTBUG-15256
Change-Id: I7f67393ddfbfe37fde1ca5ef45e4ad7f4b5324b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The cursor() test was missing a QTest::moveMouse() before sending of the
mouse event (as all the following subtests do). When run on a desktop with
the panel on the left side of the screen, the mouse pointer would land over
the left item instead of in between them, as assumed by the subtest, and
the following QCOMPARE failed.
Change-Id: Ib74fdf0cfbfbc8ecb79a906610a2da5cb50c89d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Use QTest::qWaitForWindowExposed() and QTRY_COMPARE() instead of
hardcoded timeout.
Task-number: QTBUG-35308
Change-Id: I27eee9932dd3b6087db4ad13b1a4fb184a487f57
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Introduce isNull overload to take field name as a parameter.
This is corresponding to the commit
7e6e141234
Change-Id: I122f79707d26eaa09c2f38dc31aeee1dac7de33b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Currently the QPrinter constructor, setOutputFormat() and
setPrinterName() make bad assumptions about the availability of printers
when configuring NativeFormat which can lead to inconsistent print
engine set-ups leading to crashes in the print dialog, especially on
Windows where a valid DEVMODE is needed.
This change cleans up the init and methods to ensure NativeFormat can
only ever be set if we have both a valid plugin and a valid printer,
if not the PdfFormat is used. One side-effect of this is that it is
now impossible to set an invalid printer name via QPrinter (but still
able to be done via QPrintEngine if really needed). Also if no
default printer is set then use the first available one.
This also fixes a bug where setting a new printer name on Windows
reset all the saved settings.
[ChangeLog][Important Behavior Changes] QPrinter no longer allows you
to set an invalid printer name.
Task-number: QTBUG-34345
Task-number: QTBUG-26008
Task-number: QTBUG-26430
Change-Id: I19737e4209d8c8df5817ea83246b3dd0c483ee85
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
As the last line in the QObject destructor, we call setParentHelper(0) to
remove ourselves from the parent. In the process of that we also initiate the
QML parentChanged callback. The first thing that parentChanged callback used to
do (but now does it too late, after 26350b5ceafa0ade1328037f6234a7d288eb8f48 in
qtdeclarative) is to check if the object was deleted and then return. We could
re-introduce the check there, but I think it's cleaner to not bother calling
the callback on a dead object in the first place.
Change-Id: Ia4d43b65a9b3744a451b4c312a2d6f9c0e3b67dc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Add a check for the case sensitivity of the file system, so that
unit tests can determine whether names of preference files with
different case should generate an error or not.
* Add check for OS X native file format in rainersSyncBugOnMac().
Task-number: QTBUG-32655
Done-with: Liang Qi <liang.qi@digia.com>
Change-Id: I76821653dd4ebc00e20abdbb5b79c1a80290dece
Reviewed-by: Liang Qi <liang.qi@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The QPrinterInfo copy and QPrinter constructors and the assignment
operator were not taking the shared_null into account, and so any use
of them resulted in a new null QPrinterInfo different to shared_null,
which lead to isNull() always returning true in anything other than
the simplest use case. While fixing this also make the shared_null a
Q_GLOBAL_STATIC.
Task-number: QTBUG-21087
Change-Id: I0beb24088208e9ed58d21ca26b0c8d00b02e5b8f
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Since contains() just wraps indexOf(), which has a QLatin1String overload,
add one for contains(), too, for consistency.
[ChangeLog][QtCore][QString] Added QLatin1String overload of contains()
Change-Id: I2acc628a51e00789fb2b90400cf0c523a5b5e65a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When we unlock the mutex, we need to take in account that the Connection
pointed by 'node' may be destroyed in another thread while it is unlocked
Doing 'node->prev = &node' will make sure that 'node' is actually
updated when it is destroyed.
Setting isSlotObject under the mutex is safer and ensure that no other
thread will attempt to deref the object.
The regression was introduced in 5885b8f775
tst_qobjectrace was updated to catch races arising when we are
connecting with function pointers.
Change-Id: Ia0d11ae8df563dad97eb86993a786b579b28cd03
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
New macro QVERIFY_EXCEPTION_THROWN may be used to check that some code
really throws an exception of specified type.
Change-Id: I7cf499c7c37a35407862bc604c6eb862c5f329d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Avoid menus showing up at 0,0 which is a taskbar area when running
Unity.
Task-number: QTBUG-33972
Change-Id: I156eec78248cec1708adf6bcf2e9ddcc98b7d8c4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
There is a known bug where duplicate textChanged signals are
triggered on backspace/delete. The bug has been seen on Windows,
Mac, and Linux. Gabi showed that this duplicate signal is caused by
two calls to finishEdit(), one direct and one nested,
in QTextCursorPrivate::remove().
To attempt a fix, I removed the direct call and do not change the
nested call. This change only affects text buffers when they
receive remove commands.
This seems to fix the problem, shown by the test project
uploaded to the bug tracker and also in countTextChangedOnRemove
in tests/auto/widgets/widgets/qtextedit/tst_qtextedit.cpp.
Further analysis of finishEdit() and QTextCursorPrivate::remove():
finishEdit() calls signals contentsChanged() as long as a valid block
is being edited. Remove() calls finishEdit for all non-table edits,
so finishEdit will be called for most cases.
Methods in the public QTextCursor all seem to set adjusted_anchor
and anchor, none reading it directly, so I haven't found publicly
observable consequences to "adjusted_anchor = anchor = position;".
Task-number: QTBUG-15003
Change-Id: Ic35f25ee81c4007867b47cd8be03c146a673f86d
Reviewed-by: Graham Coleman <ravelite@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Qt::WA_Mapped maps (sic) to windowHandle()->isExposed(), and we set/update
it in QWidgetWindow::handleExposeEvent(). Setting it directly in show_sys
shortcuts QPA and assumes showing a window is synchronous on all platforms,
resulting in trying to flush the widget backingstore when the window was
not exposed yet (due to discardSyncRequest starting to return false).
This reverts commit 829b1d13b2.
Change-Id: I0bd700d4939bc69ba184d8586435b68ec3dd72fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This was a tweak to fix a bug in 2005 which has probably outlived its
usefulness, plus an accumulation of workarounds on top. (started as
48b5266e8ff9b472a16290dd923fe24dd0b6989b in the historical repo)
Task-number: QTBUG-34760
Change-Id: I2c01269e43636385ee5c89305c6b90f4a7f2c537
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The private method dateForLocalTime() was not checking that transitions
were valid, resulting in infinite looping when a time zone didn't have
any future transitions.
Change-Id: I0e5d07063861778dd86056a80c36fdd9f9d36133
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix parsing of TZ file abbreviations, to correctly return cases where
POSIX rule doesn't have separate DST rules, and where abbreviation
is a sub-string of another abbreviation, otherwise any toString() call
will crash.
Add test to exercise all available time zones, especially useful for TZ
file to confirm all file format variations dealt with. Fix parsing of
Version 3 of TZ file, and ICU display name, to allow all files generated
from release 2013f to pass, otherwise isValid() call will crash.
Task-number: QTBUG-34061
Change-Id: Ie0b6abc218adff1c8967eb33fdb0762041d2305f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name Olson was misspelled as Olsen in the public api of QTimeZone
which is needed to be fixed before first public release in 5.2 would
freeze the api and prevent it being fixed. It has been decided that
renaming as IANA ID would be more future-proof.
Fixes to the private code will be done separately to keep this patch
against release branch to the minimum required.
Task-number: QTBUG-34735
Change-Id: I8ee90644862c907f6d1937b8536f0c02583ae736
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
For me, this test failed because I don't have a Documents folder in my
home directory, even though that's what's returned from QStandardPaths
as the first DocumentsLocation.
Fix by falling back on the home directory if documentPaths.front()
does not exist.
Change-Id: I483f62f3b4b43d055c74774a7058a4aa420849b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The dockwidget's toplevel window would be a parent of the container's
window when floating. When plugged back into the mainwindow the
dockwidget's window is destroyed and the container's window along
with it. Added a function toplevelAboutToBeDestroyed to unparent
the containers window before this happens so parentWasChanged will
work correctly.
Change-Id: I06679cfb3a8fa3834c0db0be5973c012b8277275
Reviewed-by: Ulf Hermann <ulf.hermann@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
We don't want platform behavior for whether or not maximized/fullscreen
windows can be resized to affect the test for resize event propagation.
Change-Id: I8c118733ca5d2553aacf24d0b8debeb1a4e27103
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Give processes a more complete environment (openSUSE
requires more variables to start an X11-process),
add test column indicating whether a test is
supposed to crash. If it is not, report crash reason.
Change-Id: I1e0ad59824963f69ee425f331d845741be2b3928
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
When clicking on a widget currently focused, w/o having Qt::ClickFocus
set as focus policy, the focus should stay on the widget and not get
propagated to the widget's parent.
Task-number: QTBUG-34042
Change-Id: I53f1153829cc7228de02a90e38125b5cf4ee5008
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
qWaitForWindowActive waits until the timeout for the window to receive
a non-0x0 position, even when it's active, just in case the WM sets
the position as a response to focus-in.
Change-Id: I748cce2747f406a8cdff556465175f02675fcd13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We claim that -1 is a special automatic value, but calling
setMinimumSectionSize with -1 is unfortunately ignored due a
regression in 524c3e05e8
Change-Id: I7d7e5dbbf78e561849d2f2352c9edb2df36aa181
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Make it possible to match messages by a pattern.
Change-Id: I713312e86db5471755459f1ecc43e8f1ac7a95fb
Reviewed-by: Jason McDonald <macadder1@gmail.com>
GCC refuses to use a merely static const uint array in a constexpr function.
Fix by making the array constexpr if supported by the compiler.
Change-Id: Idd59d3f74f8f4e98aad82bc892f4a6469932df9f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This necessitates adding d==0 checks in QCollator. By documenting that
moved-from instances can only be assigned to or destroyed, we can
limit the functions in which to check for d==0 to the assignment
operator and the destructor.
Doing otherwise would destroy all advantages of move semantics by
introducing a heap allocation to re-populate other.d.
Add a test for this (QCollator didn't have any before).
Change-Id: Ic6ff202072822bebfd5e48259c3d0fa345a63118
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rather than breaking at column 79 precisely, break entire words,
to improve readability.
Change-Id: Ie30db00f0e6ed95cce87480c3b91804826c6076b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Vertical scrollbar may get out of sync. When this happens, the calculation of
firstVisibleItem will retrun "-1". This must be handled in ::sizeHintForColumn().
Added an auto-test for the crashes.
Task-number: QTBUG-34717
Change-Id: I867fd144ef3ce45e382337c5eafe345f573cd944
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Center windows on screen to avoid conflicts with Unity taskbars,
observe minimum geometry for Windows, move cursor out of the
way for Mac. Introduce QScopedPointer to ensure cleanup in
case of failures.
Change-Id: Ic169e015e795597457b8e85a28ff7fcb7b9b9430
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
It's not really clear if styles *must* return a non-negative value for
QStyle::pixelMetric(PM_Layout{Vertical,Horizontal}Spacing), but both
QBoxLayout and QGridLayout seems to be robust enough to handle this.
They will simply make sure that the spacing is never negative.
We therefore make QFormLayout equally robust.
Task-number: QTBUG-34731
Change-Id: I62235bfcd8adf7757cf15bc9927b29650ae6459d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Previously matched Qt.platform.os, however that can only provide one
string. Multiple selectors can be present at once, so we can provide
both unix and linux instead of having to pick the most specialized one.
Task-number: QTBUG-34796
Change-Id: I219517d740fa7385e923a9e09cb7e241378fbaee
Reviewed-by: David Faure <david.faure@kdab.com>
Up to now, the feature classe Uniform Initialization was subsumed by the
Q_COMPILER_INITIALIZER_LISTS flag together with support for
std::initializer_list.
This caused at least two problems:
1. On QNX, the standard libray does not ship <initializer_list>, even
though the compiler (a GCC 4.6, IIRC) supports it. But since there
was only one Q_COMPILER flag for both, support for the compiler-only
part of the feature had to be disabled, too.
2. MSVC 2013 supports initializer lists, but has a bug that renders full
uniform initialization support, as required for QUuid, useless.
By splitting the feature into two, we can separate them better, and do
so in QUuid, which is the only class that currently takes advantage of
uniform initialization (to provide constexpr constructors).
Since Q_COMPILER_INITIALIZER_LISTS worked as a flag for uniform
initialization so far, with the two known exceptions above,
UNIFORM_INIT is defined whenever INITIALIZER_LIST is, except that
I don't revert UNIFORM_INIT on QNX as I do for INITIALIZER_LISTS
and that I expect the MSVC 2013 features to set INITIALIZER_LIST,
but not UNIFORM_INIT.
Task-number: QTBUG-34705
Change-Id: I81916e950a0f3aab3de7977e0326d2de3d31b14c
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When EnumForms was used then the dmPaperSize was not always correct for
the custom paper sizes available on some printers. By using
DeviceCapabilities we can be sure that the information is correct in this
respect.
This also fixes respecting of the custom paper size if one is given and
there is no corresponding existing paper size for it.
Task-number: QTBUG-34276
Change-Id: I9924d5be8527027fc434261e37f6c7aae66210c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
As the test case shows, clear() is semantically equivalent to
setKeySequence(QKeySequence()), so implement it that way.
Change-Id: Id68edbbf85aac3bcff82c81310c38274ed8e6708
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
With 46a8885ae4, we failed when parsing
entities whose partially expanded size was greater than 1024
characters. That was not enough, so now we fully expand all entities.
Amends 46a8885ae4.
Change-Id: Ie80720d7e04d825eb4eebf528140eb94806c02b1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
need to leave some items out like media folder access, as this is not
available by default and also requires certain capabilities to use
those.
Furthermore updated the tests for sandboxing as well as skip cmd.exe
related tests as that does not exist on WinRT.
Change-Id: I992b1e195b79615bea0be4f84f56cfb8f0d902bf
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
All ci nodes are currently missing 3d support, when that is enabled
this test will start to fail.
Task-number: QTQAINFRA-711
Change-Id: Ie6b840e290a9371fa895681e58d6dedf55b777e6
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Currently network is only required to gather the host info for one
test case. That does not justify to disable all other tests, which can
provide useful information on the state when doing a port. Hence
disable that testcase if no network is available.
Change-Id: I202ef49b3e07ae69ec85ee0432ae0a771a90e816
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It is probably better not to have a default boolean in
QHeaderView::setResizeContentsPrecision
Task-number: QTBUG-34665
Change-Id: I0bb2c35abc1d5713bb3ee65df3af86c04f175a38
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
to reflect the fact that this returns and sets the whole session
ticket, and not just the session ID.
Change-Id: I00fe2bc4197dbcd7a02b3ae4f2f84e3a2a7edad0
Reviewed-by: Richard J. Moore <rich@kde.org>
Add few cases where conversion to or from LongLong was missing
We need to make it work if we want to use variant.canConvert<qint64>
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert with longlong
Change-Id: I0f65073802b62d99250601dd90a8cd2e4d934b60
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
It introduces QTBUG-34653 (Qt Designer widget box no longer
repainted after collapsing items or using the filter).
This reverts commit 04de24c644.
Task-number: QTBUG-13522
Task-number: QTBUG-34653
Change-Id: Ieb9766e7f15acea901fce4ad7142aa72557b9957
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The tracing API still misses some real-world exposure. Let's
re-do this in dev to have more time.
This reverts parts of following commits:
466e0dff4b7a47aebe9ea652bab6a78f0654ceb84162522edd32f27b43679ff81bdc1a
Change-Id: If97340c37b8b3363f597683336a8390d5ff386f1
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The problem is the verifyConstExpr<>() line involving the ~ operator.
The result as an integer is a value that can no longer be represented
in an int. This is known at compile time and thus template deduction,
which only has an int to match against, fails.
To fix, use an unsigned int as the first template argument of
verifyConstExpr<>().
Clang's error message for this is really sub-optimal, cf.
http://llvm.org/bugs/show_bug.cgi?id=17834
Change-Id: I3a77dc54d2bee12b016d75724ac1bd7801f4cf2d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure that the size of QIntegerForSize<N>::{Signed,Unsigned} is
actually N.
Change-Id: I221304f7c420e80758ef7b115bafb7cf1f8c8829
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since the original change caused a problem with the CSS
rules being always inherited where in some cases this should
not be happening.
This reverts commit 6f65466137.
Change-Id: I6e9cf163d752b1869b5e967a7ab59963d655ba87
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This is what ConfigLocation was meant to be. A directory shared by all
applications. Unfortunately when I wrote the fallback on Windows,
I picked DataLocation (which is app-specific) instead of
GenericDataLocation (which is shared between apps). This makes it
impossible to have config files shared between apps, e.g. for libraries.
It also makes ConfigLocation quite inconsistent (on Windows one cannot
use it to load another app's config file, while it works everywhere else).
All this is fixed by GenericConfigLocation, which is shared between apps.
Change-Id: I23a755131061d4fea01e13dd1038fbd8ef333a5d
Reviewed-by: Alex Richardson <arichardson.kde@googlemail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only DirectConnection is tested
Change-Id: I525c6a65428489c34e58d1d9600b4e5ebda733b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Nested references with a depth of 2 or greater will fail. References
that partially expand to greater than 1024 characters will also fail.
Change-Id: Id4e49d6f7cf51e3a247efdb4c6c7c9bd9b223f6e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Allowing for creating a printer in various modes
and toying with the paper settings.
Task-number: QTBUG-34276
Change-Id: Ieb35dc55c509f84d7d81817c7903e02a41ba8b44
Reviewed-by: John Layt <jlayt@kde.org>
WinRT doesn't use the Windows Timezone backend, so don't build the
Windows test.
Change-Id: I32620546de3ad1f19402cc1359f8038200c915ec
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This should be using qputenv; putenv is deprecated on MSVC.
Change-Id: I7c27cf5f7955624fa3553b7a34ab11c6fae462b8
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The grabbing always grabbed the desktop. This caused it to also grab
tooltips, siderbars etc that could overlap the window which again
caused the pixmap comparison to obviously fail.
This will currently only fix it on windows. If needed, it should also
be fixed for other platforms.
Task-number: QTBUG-30566
Change-Id: I5cee8651e1d94dedded0acae8b19f351acd976c4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Check if the item is hidden before show the item(QWidget)
Task-number: QTBUG-13522
Change-Id: I1c605d5cb8a80f340e9b7601612d3760f51cb4a7
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The current synchronization mechanism was racy: decrementing waitingThreads
and then hoping that the wakeOne will wake a thread before its expiry
timeout happens. In other words, on timeout, a just-assigned task would
never run. And then no other task would run, if maxThreadCount is reached.
Fixed by using a queue of waiting threads (rather than just a count), and by
moving the wait condition into the thread itself, so we know precisely
which one we're waking up, and we can remove it from the set of waiting threads
before waking it up, and therefore it can determine on wakeup whether it
has work to do (caller removed it from the queue) or it expired (it's still
in the queue). This is reliable, whereas the return value from QWaitCondition::wait
isn't reliable, when the main thread has already decided that this thread
has work to do.
Task-number: QTBUG-3786
Change-Id: I1eac5d6c309daed7f483ac7a8074297bfda6ee32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass window flags on to ColorWidget constructor and use a window
frame + stay on top-hint for the moveChild/showAndMoveChild tests
to make the screen grabbing more reliable.
Disable animations on Windows since they seem to affect screen
grabbing as well (fading in of windows).
Task-number: QTBUG-30566
Change-Id: I8eacfc203d26674dc1b283d6643f3d434f218f26
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It is now configurable if test results are stored in xml, plain text
or in both formats. Default is xml, like it was,
Max runtime is also configurable so that we can reduce the CI round.
With default setting it takes more than eight hours within current
CI node.
The latest test result dir is linked as latest.
Change-Id: I5d27cefe17e4f86648132db7ec104711d993c3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We must not include qt_windows.h in public headers,
otherwise we're cluttering the environment with a colorful
bouquet of Windows API preprocessor macros and typedefs.
Task-number: QTBUG-34058
Change-Id: I415717ea2a47f39e7f4b7ce1c1df9d49afc99278
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
CGPostMouseEvent is obsolete and known to have "undocumented special
cases and undesirable side effects." The newer Quatz API doesn't
allow neither multiple mouse button events nor preserving the mouse
cursor location.
Change-Id: I121b02fd01e2990488b05e45431cbdc13589656e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
[ChangeLog][QtWidgets][QAbstractSpinBox] QTBUG-5142 - This will
allow a group (thousand) separator to be shown in QSpinBox
and QDoubleSpinBox widgets.
Task-number: QTBUG-5142
Change-Id: I2e23f5f83c93bb092a2dbd784e06d17d40d42909
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Only Commit, Finish and Cancel didn't have an object name, yet.
Also Extract Method on the switch statement, add a test, and
use QStringBuilder.
Task-number: QTBUG-29924
Reported-by: Leo Arias
Change-Id: I8c29606bc53e9d4caab631da2089e971a9da2d75
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Move the test for QAbstractPrintDialog from widgets into printsupport
Change-Id: Ia7595fa650a7ad565df3090207500ed06564e842
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Required for QQuickText & friends to implement image resource handling
in a clean way - to get rid of QQuickTextDocumentWithImageResources and
eventually make QQuickTextEdit's document interchangeable.
Change-Id: I97314a6c3e2d5726539d5722795a472631388cb0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
After Ic12de12ec51c20de52d040514e90be5e783add43 this functionality
was broken. Added an autotest.
Task-number: QTBUG-34159
Change-Id: I8f41b7073dc57fea855ab87796f09e8a91520d13
Reviewed-by: David Faure <david.faure@kdab.com>
The default link color used to be resolved to the link color of the
application palette, but got lost during the Qt 5 modularization (see
commits 7351a43 and 3f9a7f9).
Task-number: QTBUG-28998
Change-Id: I7f07427f6c03f83c557100938ad9f7a39349d303
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
the method returns true if there is not such field.
Change-Id: I25db8de4561d3e0604f3e64edc1810140ba4aad2
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We change the behavior slightly from the initial implementation in
5.1. Forcing the use of native child widgets is causing massive
performance issues so instead, we attach the embedded QWindow directly
to the root window. The only exception is QScrollArea and QMdiArea
which still enforces native windows for the entire parent chain
to make clipping and stacking work.
Task-number: QTBUG-34138
Change-Id: If713637bd4dce630552ace2f8ad6b2e86c063721
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Introduce QStyleHintsPrivate and introduce internal
setters called by QApplication.
Task-number: QTBUG-33991
Change-Id: Id61f8b1e2b5c9cfd7b4713aaded66e93e6f63719
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
- Fixed issues when having multiple devices connected at the same
time.
- Fixed hard coded paths
- Removed not existing function call, which caused test run to exit
too early.
- Added possibility to add and connect to device, configured as env
variable.
Task-number: QTQAINFRA-641
Change-Id: I8c1e003ce4ffbc9fdd9572dc55eef8fe92330cba
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The handling of the null QPolygonF case was not correct as it would
always be seen as valid. This ensures it is treated in the same way as
QPolygon when it is in fact null.
[ChangeLog][QtGui][QPolygonF] When a QVariant holds a QPolygonF()
then it will be correctly seen as a null QVariant.
Change-Id: Icae34f513c3a8e1dd3f50cb64a3d13ae7c636cc4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The RFC 2822 date format should always use en_US locale for month and
day names instead of whatever the system locale is. Also remove some
duplicate code.
Change-Id: Ia2f7ee405b4e0e2f04980301783b9488628da73f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added clarifying explanations to the QEXPECT_FAIL statements.
Now it should be easier to understand what is expected from the parser.
Change-Id: I1dacd60564f292d9ce43de7254525c34fa7cdc55
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Check if the datetime is valid before converting it to a different time
spec. If it is invalid then just change the spec to keep behavior
consistent with 5.1.
Task-number: QTBUG-34020
Change-Id: I6630ec1d50f810a2178ab3222bd32af018085f81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the default output of the logging framework to prefix messages
with a 'category: ' in case the category is not "default", so that e.g.
QLoggingCategory cat("qt.core.codes.windows");
qCWarning(cat) << "MultiByteToWideChar: Cannot convert multibyte text";
will print
qt.core.codes.windows: MultiByteToWideChar: Cannot convert multibyte text
while output from qWarning etc will show unaltered output. This should
help users to discover categories, and to group output together.
Change-Id: Iac2e1514f7dc5671966c36a440a119c857564cfc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
the function is a trivial wrapper for the QTextCodec one, so there is
little point in explicitly testing it.
Change-Id: I0c4950e5a54b7ffff9ba73a001cedb517497a596
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are a few problems with the Quadruplor setup in Qt 5.
First of all, it doesn't work with modules, since it has
a hard coded library dependency list. Second of all, it
duplicates the application template, so changes need to also
be duplicated. This often gets out of sync. Third of all,
it duplicates a lot of deployment rules which are now contained
in androiddeployqt.
Task-number: QTBUG-33996
Change-Id: I0630a38aeba7d0075df8fae671abc311fc36de61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
No need to default to yet another SDK here. This is a left-over
from Necessitas, which supports versions down to android-4.
Change-Id: I2e79be641288c14f92c205b30f2db6db793d783f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This fixes QStatusBar so it is back to the original behavior of only
emitting the signal when the message has changed. The intention of the
code that caused this to break in the first place is kept intact.
Change-Id: I2f57c2abec01246ed924626ad954ac9ff9889855
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QAccessibleImageInterface already has an API to return the
size of the image.
This function ensures that their API's are not overlapping.
Alternatively, we could merge both functions into
QAccessibleImageInterface::imageRect(), but the assumption is that
images change position more often than their size.
Change-Id: I55c25cdff187b9f497828f04cfd5f969cfbc451f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This is a performance and memory optimization which also fixes bugs
that are related to creating widgets, file system models etc.
despite using platform native dialogs. Similar to
785bc64f8e for QColorDialog.
Task-number: QTBUG-33039
Change-Id: Ia1aa7ec1f43b47006b9ebd377aed15c958538a17
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the QPolygonF type was added to QMetaType it did not bump up the
values in load() and save() for QVariant.
Task-number: QTBUG-33981
Change-Id: I7ad99cda70620c5449c15527c3daf920972d047f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The test is randomly failing on CI when ran on 10.7.
Task-number: QTBUG-31454
Change-Id: I79fce9a37616c6abaee960e338f8eea8fe6f31cf
Reviewed-by: Jani Heikkinen <jani.heikkinen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Position cursor outside and move once more.
Task-number: QTBUG-33972
Change-Id: If060f1359361981cf1243d8d2a4ebef181689d74
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This patch merges the two classes that were used to make
dock widgets accessible into one.
The title bar does not need to be represented by its own
accessible object.
In addition the buttons on the toolbar are now labelled.
Task-number: QTBUG-33946
Change-Id: Id90d8c09f15ed683e64dbe3f6ac55bca7a0b300f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The pointer can be null. Going trough the reference invokes undefined
behavior here.
Change-Id: Ia84e4e732cdcbbaee0f5f0679765d18069ea8b2d
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The cursor needs to be within the view from start on Mac.
Task-number: QTBUG-33973
Change-Id: I313c9fd1c3a917e135a92497f1818d1b0d8b7698
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When CSS was set in the head tag then it was not being inherited by the
child tags. This ensures that the inhertiance happens and that the deeper
the CSS is set then it will ensure that it has precedence over the ones
set on the parent.
A test is added that shows the standard inheritance from the head tag and
the precedence from child tags in effect too.
Task-number: QTBUG-28770
Change-Id: I30be3ec141b2cd8d6e0db8a92669aed34da93b33
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This makes it so that two QVariants created from the same
QIcon (or from QIcons that were assigned one from eachother)
compare to true.
Unfortunately creating two QIcons with the same path and
comparing them still gives false as they have different cacheKeys
Change-Id: Iafe2bc4082a830f9c6469f083c26a7abbe4b35c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This yields the same results as previously and is more in line
with existing interfaces.
Change-Id: I0bf0372bf18f3bfde579385cddbe594bf71e3c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qtbase/tests/auto/corelib/io/qfilesystemwatcher/tst_qfilesystemwatcher.cpp:652:36: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
f.write(QByteArray("i am " + i));
~~~~~~~~^~~
qtbase/tests/auto/corelib/io/qfilesystemwatcher/tst_qfilesystemwatcher.cpp:652:36: note: use array indexing to silence this warning
f.write(QByteArray("i am " + i));
^
& [ ]
Change-Id: Icc966559be3c2cde3416193b8a1ddab7e0323ade
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I5a1e601e3aa6e84300efa09bfbd9232fecab903e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: Ib1047731667ba8a7b9db2f62924eb42a6b85b4fd
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Change-Id: I88d98421978e0f5c55af8647f3f74c265b45bd37
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On one suse box I have both /usr/bin/sh and /bin/sh which means that the
test should prefer the one first in the path instead of random order.
Change-Id: Ie94bf8404479fa42a36a8ee45e09986114693871
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QCoreApplication test has quite a few test cases that we would like
to exercise using the GUI event-dispatcher. Instead of duplicating the
tests for the GUI dispatcher, we inherit tst_QCoreApplication, which
also lets us add extra tests that are specific to tst_QGuiApplication.
Change-Id: Ib411457131b8d3fed871f682c1c0568577f6127d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
If create() or makeCurrent() calls fail, the test should fail fast.
Change-Id: I025c541f94c8eee492cf0e1545bfbb8027eff2a7
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
At the Daylight Tme to Standard Time transition, the local time repeats
itself, i.e. 2am occurs twice. Qt's behavior when setting this using
the local time is ambiguous, as it depends on the system implementation
of mktime, which behaves differently on different platforms. Currently
this behavior remains undefined. When setting using an msecs or time_t
value however we can determine the correct instance to use and cache it
to ensure that any conversion back from local time to msecs is performed
consistantly on all platforms.
Note that caching this value will result in any calculations being wrong
should the system time zone change, or its rules change. This will be
fixed in Qt 5.3 when the system time zone change signal is implemented
and QDateTime switches to using QTimeZone instead of mktime to provide
consistnt behavior across platforms.
The QTimeZone spec does not require this fix as it already caches the
correct offset in setMSecsFromEpoch().
Change-Id: I799588db474e744a6d81e80f6a0442920569ebd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function is useful if a floating point comparison requires a
certain precision. The return value can be considered as the precision.
For instance, if you want to compare two 32-bit floating point values
and all you need is a 24-bit precision, you can use this function like
this:
if (qFloatDistance(a,b) < (1 << 7)) { // The last 7 bits are not
// significant
// precise enough
}
Task-number: QTBUG-32632
Change-Id: I020a58d2f9f9452ac3c510b4bb560dc806f0d93c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-26722
Change-Id: I579111b5d34f8e3cdc6bb016d9c0e42ec3ffb8c9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Stephen Chu <stephen@ju-ju.com>
Mac uses the CLDR format codes which need to be translated into their
Qt equivalent. The existing code mistranslates the year code, is
outdated for a number of new codes introduced in recent versions of
CLDR, and by default accepted any codes it didn't recognize.
This change updates support to the latest version of CLDR, fixes the
treatment of years, and defaults to ignoring any new format codes
added in the future.
Note that this change cannot have auto tests written as the system
locale formats change between versions of OSX. Testing must be
done manually by changing system locale and formats.
Task-number: QTBUG-25057
Change-Id: I69dda25b4a0b38d3971995644546306876922d57
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In case of implicit memory sharing, QString::reserve caused data
truncation if given size was smaller than size of data.
Task-number: QTBUG-29664
Change-Id: If2da5ad051385635ebb829c18b5ebaa349f08e8a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
If we end up QSKIP'ing the test 'wronlyFileName' is never created.
Change-Id: I2ccbfdb630b58d7904e73b476a65a82a45ab90d7
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Commit 310031188c (Fix moc stumbling over gcc __attribute__
extensions, 2012-10-01) applied similar logic for GNU style
attributes.
Change-Id: I550eaefd703b4e974e6ffae7716f02074c8a8823
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This simplifies the code a bit and ensures that it is respecting what
the relevant function expects the size to be as.
Change-Id: Iec88fab84c27a33d6f1a9e9413ea6beb0a39c68d
Reviewed-by: John Layt <jlayt@kde.org>
Unfortunately we returned the column description when the AT client
asked for the row description....
Change-Id: I46bc0edb4fd0f7cc6d98d7d6e0d8ca6f77553a26
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Fixes the obvious race between the test of 'release' in the thread
and the setting of 'release' in the test function.
Change-Id: I92df52d7b18e8154f17229a3dbd4a0e58f4a3b5b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The code uses a QSignalSpy to check whether the thread started,
but the signal emission (and subsequent appending to the spy) and
the check for spy.count() before the final thr.wait() are not
synchronized:
The signal emission happens-after the thr.start() and -before the
final thr.wait(). Likewise, the spy.count() happens-after thr.start()
and -before thr.wait(), but neither one happens-before the other.
Thus, there is a data race.
The wait(200) between thr.start() and mutex.unlock() doesn't help,
either, because we check only that it doesn't return true, iow, we
check that it timed out. But it will happily do that if the thread
has not yet started executing, so there's no happens-before relation
to be had via that avenue, either.
I first fixed by moving the spy.count() check to after thr.wait().
In that case:
signal emission happens-before thread finishing
happens-before thr.wait() returning
happens-before spy.count()
so no race.
Arguably, that makes the check rather useless, so I decided to remove
it completely.
Change-Id: I6bb47c4114961ee6e9251cfebeb4b7794ba674a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Remove benchmark tests that are no longer required as they are simple
overloads of other methods.
Change-Id: I610211543d17c077f482fa2145ac3da7d0767282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support to QDateTime for time zones using the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Add support for a new Qt::TimeZone
spec to be used with QTimeZone to define times in a specific
time zone.
Change-Id: I21bfa52a8ba8989b55bb74e025d1f2b2b623b2a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add backend implementation for Windows times zones.
Change-Id: I30946f6672488c3f1d1d05754e9479aa62cce46f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a backend for TZ Files.
If available uses ICU for the display names and translations, otherwise
the abbreviation is used.
Change-Id: I58c777462810b1a76ea7bd95886836b70b8a3db5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement the new QTimeZone class based on the Olsen Time Zone ID's.
This is the base implementation and does not include the Platform
backends which are implemented separately.
This change does include a default UTC backed to be used if no Platform
backend is available, i.e. if QT_NO_SYSTEMLOCALE is set and ICU is not
configured. This backend also provides a default set of time zones in
the standard "UTC+00:00" offset format that are guaranteed to always
exist regardless of the Platform backend.
This change includes conversion functions between the Olsen ID's and
Windows ID's using a conversion table based on Unicode CLDR data.
This is implemented for all platforms for scenarios such as a Linux
program needing to communicate with a Windows Exchange Server using
the Windows ID.
The CLDR conversion table is included under the UNICODE license, see
http://unicode.org/copyright.html for details.
[ChangeLog][QtCore][QTimeZone] Added new QTimeZone class to support
time tone calculations using the host platform time zone database
and the Olsen time zone ID's.
Change-Id: Ibb417d08cf2663a0979d2be855d2c6ad6ad01509
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using __LINE__ to construct unique names, use of Q_STATIC_ASSERT
is limited to one instance per line of code. On compilers that support
__COUNTER__ (GCC and MSVC, probably others), we can get around that
limitation by using that one to always get a new unique number, so
use it.
Change-Id: I89bcfaa32376b7a665f03e4275e89b13fa3e650d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sometimes it is nice to be able to replace a widget in a layout.
Change-Id: I23a6a65e417e94d53bc48639503db1a142bc3f10
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
New API:
static QString QString::fromCFString(CFStringRef string);
CFStringRef QString::toCFString() const;
static QString QString::fromNSString(const NSString *string);
NSString *QString::toNSString() const;
static QUrl QUrl::fromCFURL(CFURLRef url);
CFURLRef QUrl::toCFURL() const;
static QUrl QUrl::fromNSURL(const NSURL *url);
NSURL * QUrl::toNSURL() const;
Add Q_OS_MAC-protected function declarations to header
files, add implementation to _mm files.
CF and NS types are forward-declared in the header
files to avoid including the CoreFoundation and Foundation
headers. This prevents accidental use of native types
in application code. Add helper macros for forward-
declaration to qglobal.h
Add cf_returns_retained/ns_returns_autoreleased attributes
to toCFString() and toNSURL(). These attributes assists
the clang static analyzer. Add Q_DECL_ helper macros
to qcompilerdetection.h.
Add test functions (in _mac.mm files) to the QString
and QUrl tests. Split out the test class declarations
into a separate headers files.
Change-Id: I60fd5e93f042316196284c3db0595835fe8c4ad4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is consistent with other areas of Qt:
qmake, Qt.platform.os (QML), qbs.targetOS (QBS), and #define Q_OS_OSX.
Change-Id: Ibf98e6ba3556a14187dadae1b0235e9c907c9001
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QCompleter::setFilterMode(Qt::MatchContains) will enable filtering
out entries that contain typed characters in any place, instead of the
default behavior when only those entries that start with typed characters
are displayed. Qt::MatchEndsWith is also possible.
QCompleter::setFilterMode(Qt::MatchStartsWith) will bring the default
behavior back.
Task-number: QTBUG-3414
Change-Id: I3845704c59eb8fc401e9a650c54a9c934ed28c2e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The compiler complained that the specialization was required
before it was issued. Fixed by moving it up to the others
near the top of the file.
Change-Id: I0ae162a5db5ef29f24cd1d32285a1870fdd24b9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Merge most parts of the qlogger framework from
git://gitorious.org/qtplayground/qlogger.git
The categorized logging feature is a replacement for qDebug, qWarning and
friends. With logging statements in an app/library, a developer can
turn on the statements they care about and turn off the ones they don't.
Most work for this was done by Wolfgang Beck and Lincoln Ramsay.
Task-number: QTBUG-25694
Change-Id: Ib0cdfbbf3694f86ad9ec553b2ea36f09a477cded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add new method to return if the current time is Daylight Time.
[ChangeLog][QtCore][QDateTime] Added new method isDaylightTime() to
return if the datetime is in Daylight Time or not.
Change-Id: Icb93fd5dd0b2f7d83d2d4643eeb12922c1137e3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When Daylight Time transtion goes from Standard Time to Daylight Time
there is a "missing" hour, i.e. at 2am CET the clock goes forward to
3am. Currently QDateTime ignores this gap and considers the time to be
valid and able to be manipulated. This change respects the transition,
so any time set in the missing hour is considered invalid, and any date
maths returns valid results.
The validity in the current time zone needs to be checked every time
isValid() is called in case the system time zone has changed since the
last time it was checked. This is done by calling mktime to check the
returned result matches the expected result. This could be very
inefficient, but the returned offset value is cached each time so
mktime is not required to be called again within each method call,
effectively meaning mktime is called the same number of times by
each method. Note that this means any new methods added must be
careful to ensure either isValid() or refreshLocalTime() is called
first by any method needing to use the UTC value.
[ChangeLog][QtCore][QDateTime] The Standard Time to Daylight Time
transition for Qt::LocalTime is now handled correctly. Any date set
in the "missing" hour is now considered invalid. All date math results
that fall into the missing hour will be automatically adjusted to a
valid time in the following hour.
Change-Id: Ia652c8511b45df15f4917acf12403ec01a7f08e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change from storing the date and time as QDate and QTime to a serialised
msecs format. This format is a direct translation of the QDate and
QTime values, it is not the actual msecs since the Unix epoch. This
msecs format ensures we are always able to recreate the original QDate
and QTime values, but should still simplify the code and improve
performance.
Because we no longer store the explicit date and time we need to store
their isNull()/isValid() status separately.
The changes in storage results in the same memory footprint as before.
Note that this change does not optimize the code nor set out to fix the
known bugs, it only seeks to maintain the current behavior, although
some bugs are fixed implicitly. More bug fixes and optimizations will
follow.
[ChangeLog][Important Behavior Changes] The supported date range in
QDateTime has been reduced to about +/- 292 million years, the range
supported by the number of msecs since the Unix epoch of 1 Jan 1970
as stored in a qint64, and as able to be used in the
setMSecsSinceEpoch() and toMSecsSinceEpoch() methods.
Change-Id: I98804d8781909555d3313a3a7080eb8e70cb46ad
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids the assertion in iaccessible2.cpp(510)
Change-Id: I1a4c007ffcbcda70f0e37ef3cf55a303683b58c1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The test has been failing on all platforms. Usually it just times out,
but it also have behavied flaky, failing with different error codes
when executed twice in a row.
Task-number: QTBUG-29403
Change-Id: Ic06638f0ffd23131b4c1aa4136f715195727e959
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This allows the application developer to restructure the application,
including moving the central widget some place else.
Change-Id: Idca2f74c190500db24404e020b0eb400e41aad10
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
There is no point in having QAccessible2, so merge it with the normal
QAccessible. The header will be removed in a subsequent commit as it is
still needed by declarative at this point in time.
Change-Id: I1fc47d484d482f25387eba827bc5a373536b7a8b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
On linux using QFileSystemWatcher with inotify backend when a watched
file is moved and added again to the watched files its path is not
replaced with the new one. This behavior prevents the emission of
the fileChanged signal with the wrong file path.
Task-number: QTBUG-33211
Change-Id: Ib45d8efdf5afbf8b8f6b4b26e43f3d6ee740aca6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a disagreement between the a11y plugin and QTreeView
whether the horizontal header should have been exposed or not.
When the header was hidden, this resulted in that we sent an event
with a child id that was wrong, or in worst case higher than
QAI::childrenCount(). This was the reason we got the warning
output as described in the task.
With this commit, we consistently *expose* hidden headers both for
QTreeView and QTableView, but ensure that their state().invisible is
set to true instead.
This makes it consistent with how hidden cells are exposed.
This also fixes a bug in QTableViewPrivate::accessibleTable2Index
where we always added 1 to the index, which was spotted while
writing the test.
Task-number: QTBUG-33247
Change-Id: Ifd1f83d56296dd071424fdb81fce7628bc24fe0a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Similar to commit 8b062418 (MetaType: Fix operator{+,-}(int)
with the type-erased const_iterators., 2013-09-11), explicitly
create a copy of the iterator and intialise it.
Change-Id: I8b9edef40ca00c826f72768cba4a0992e55371f8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For easy cross-platform and cross-device UIs, automatic asset swapping
based on filename is being developed. This API provides the logic for
the swapping, so that applications can use it themselves with the same
logic as any automatic swapping done in application templates.
Selector set is initially minimal, aiming for just platform selection
and enabling a common selection mechanism for Qt platforms to use.
Change-Id: I219517d740fa7385e923a9e09cb7e241378f857a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The responsibility of sendWindowSystemEvents() is to process events from
the window system. Historially that logic was part of the QPA/QWS event
dispatcher, which naturally also sent posted events. Through refactoring,
the code at some point ended up in in the QWindowSystemInterface class,
still with the posting of events in place.
This resulted in QPA event dispatchers adopting a pattern of just calling
sendWindowSystemEvents(), as that would cover both posted and window system
events. Other event dispatchers would call sendWindowSystemEvents(), and
then use a base-class implementation from QtCore for processing events,
resulting in two calls to QCoreApplication::sendPostedEvents() per
iteration of processEvents(). This breaks the contract that processEvents
will only process posted events that has been queued up until then.
We fix this entanglement by removing the sendPostedEvents() call from
QWindowSystemInterface::sendWindowSystemEvents() and move it to the
respective event dispatchers. For some EDs it means an explicit call
to sendPostedEvents, while others were already doing sendPostedEvents
though a separate source (GLib), or using a base-class (UNIX/BB), and
did not need an extra call.
We still keep the ordering of the original sendWindowSystemEvents()
function of first sending posted events, and then processing any
window system events.
Task-number: QTBUG-33485
Change-Id: I8b069e76cea1f37875e72a034c11d09bf3fe166a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Center gravity doesn't mean center the window, it only affects the
method of converting between internal window bounds and decorated bounds.
So wanting to have each dialog centered w.r.t. its transient parent
is not a reason for using center gravity. Instead it caused the
bug that when you resize a QMessageBox by clicking the Show Details
button, it jumps downwards on the screen.
Task-number: QTBUG-32473
Change-Id: I3fabf3caa1e4d10fd4f7508e297f73efe5cc51b6
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This also fixes it in case of hidden or system files, which
were missing from the filter (found by Denis Kovalskiy).
Change-Id: Ic12de12ec51c20de52d040514e90be5e783add43
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code smply copied 100 shorts from the pointer passed into the
ushortarray ctor, regardless of the actual bounds of the original array.
Fix by making the ctor take the array by deference, deducing the size
as a template parameter, and only copying that much.
Fixes asan trace:
==18660==ERROR: AddressSanitizer: memcpy-param-overlap: memory ranges [0x7fff3c56de00,0x7fff3c56dec8) and [0x7fff3c56dd60, 0x7fff3c56de28) overlap
#0 0x457161 in memcpy asan_interceptors.cc:330
#1 0x4c40fe in ushortarray::ushortarray(unsigned short*) qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:62
#2 0x4b0437 in ushortarray::ushortarray(unsigned short*) qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:63
#3 0x47b643 in tst_QUrlInternal::idna_testsuite_data() qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:119
...
Change-Id: Ie497bc8d337bc680a562482ca71ace535797ffb3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'val' was set to
QList<...>() << ... << ...
further down.
Fixes a Clang warning.
Change-Id: I5fe80d87dbe2c1d50652dfd7b6c5f4a9198cd467
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_STATIC_ASSERT gives better error with C++11 enabled.
Aslo the qt_check_for_QOBJECT_macro had warning on some compiler since
it used null reference
Change-Id: Ic6115da800064b00c50a5762f0b79f5f656bf750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A number of QDateTime functions directly use or modify the data stored
in the private, but future changes to store msecs and status make this
maintenance more complicated. Where possible simplify this code to use
the standard msecs functions, standard constructors, or public api
instead. This greatly simplifies the functions and the following msecs
storage code changes.
This is an intermim step towards storing the time in msecs. Some
functions will be slower as a result of this change, optimization
will take place after all the msecs changes are completed.
Note this also removes a test that used valid QDates outside the range
of msecs, this change in behavior will be documented in the final
mscs change.
Change-Id: I6ef710f24babc7024091010064082e9be0b5bbfe
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test the Daylight Time transitions. QDateTime does not correctly deal
with many of these scenarios so those tests are marked as QEXPECTFAIL.
These bugs will be progressively addressed in coming commits.
Change-Id: I01eba9d6143a792f081542cb198e221efcf28e98
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The "base64url" encoding is defined in RFC 4648, which is the newest
version of Base64. There are also a few situations where the ending
'=' is not desired.
Change-Id: I9bb9fa55817b57d125189e4e795d6fde97caea6d
Reviewed-by: Richard J. Moore <rich@kde.org>
Add new public api to get and set the number of msecs since the start
of the day. Modify QDateTime to use the new msecs api.
[ChangeLog][QtCore][QTime] Added new methods fromMSecsSinceStartOfDay()
to create a new QTime from an msecs value, and msecsSinceStartOfDay()
to return the QTime as the number of msecs since the start of the day.
Change-Id: I285b725b883f1f5524fda87ca81bd64ed99fe6f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A module plugin in qml belongs to a URI/namespace. This
uri is resolved run-time by QtDeclarative by knowing the
path of the qmldir that references the plugin.
For static plugins this becomes a problem, since we lost
the information regarding which plugin belongs to which
qmldir, since a static plugin has no file path.
To avoid pushing the responsibility of clarifying this
onto the application developer, it is better to embed this
information into the meta data of the plugins themselves.
Since this information can be resolved by the
build system, a new option to moc has been added:
-M<key=value>
that will let you add meta tags to the meta data from
the command line to each class that has an IID specified.
For the URI case, we can then e.g do:
-Muri=QtQuick.Controls -Muri=QtQuick.Controls.Private
Change-Id: I81a156660148fc94db6f3cac0473e9e1c8458c58
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These structures do not need to be packed. With some compilers, Q_PACKED
was defined to be empty, which means that the code was working fine
without packing. Or there were some lingering problems on those
platforms (MSVC) and we're now exposing them in all platforms.
Actually, it shouldn't be a problem anywhere. QCharAttributes, quint24
and QFontEngineQPA::Glyph have only char/uchar members, so they're
packed already (they have alignof == 1). The only platform where that
wasn't true was ARM OABI, which we don't support anymore.
QFontEngineQPA::Header seems to always come from a QByteArray, so it
doesn't neeed to be packed either. However, just to be sure, I'm
inserting a check for alignment.
And QFontEngineQPA::Block isn't used anywhere.
Change-Id: Iacfa25edf336ef2a03aeb6e40ae90937a21661ae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
New functions left, right, mid were missing in the api.
Change-Id: I3590a84431555d009d5012b204c111385bdceed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
which would interpret 'path' as a hostname.
The check is in the public setPath so that the internal one can still
support parsing URLs such as ftp://ftp.example.com//path.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
normalizes the path given in setPath, removing ./ and ../ and duplicate
slashes.
Change-Id: I05ccd8a1d813de45e460384239c059418a8e6a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-DKEY="VALUE" was correctly turned into -DKEY=VALUE,
but -DKEY=\"VALUE\" was turned into -DKEY=\VALUE"
due to the erroneous check ('quote' is still 0 when
encountering the first '\' character).
This fixes QCoreApplication::arguments() as used by
moc.exe after porting to QCommandLineParser.
Further investigation shows that double-quotes and single-quotes
are handled differently. The tests now ensure that this parser
respects what Windows sends in argv, and in particular that
QTBUG-15379 doesn't regress, as well as fixing QTBUG-30628.
Task-number: QTBUG-15379, QTBUG-30628
Change-Id: I95062c9a6022632b321b2f6fae3089f07be7b5c6
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of 5.0, this always return true.
Change-Id: If225c7219e283da97e870f0d66a87b21c3cacfc0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMap explicitly sorts its entries by key value. For an ordered container
it's (often?) useful to access the first or last entry, for instance to
quickly compute the next key of the mapping. The first entry is easily
accessible by the STL begin() method, but for accessing the last entry
pretty ugly iterator arithmetics must be applied: *(end() - 1). With
their first() and last() accessors the container classes QList and
QVector provide a much nicer method of accessing extrema, so for
consistency this syntactical sugar also should be applied to QMap.
Change-Id: Ibd544acbad8c3ac16f12a1e74362207ea1694375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Do the same as in mousePressEvent.
Otherwise it is not possible to handle the event
in one of the graphics views parents.
Task-number: QTBUG-8061
Change-Id: I67c7635361a9ed595c513c28ea016e6253fa2101
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Change the debug format from Qt::TextDate to a more detailed ISO style
format including better time spec output.
[ChangeLog][QtCore][QDateTime] The debug datastream is now an ISO-like
format instead of Qt::TextDate
Change-Id: Iddbb8199c3bfbf7bca845482617e7a85da43259d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this patch,
qRegisterMetaType<QSharedPointer<double> >("QSharedPointer<double>")
without a metatype declaration fails to compile, whereas it works
with Qt 5.1 (ie, before commit e9a69c3ba9)
Change-Id: I9408f711c9df810ff29b879b7696dab81c1160f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Clean-up the implementation of toString() and fromString() methods in
QDate, QTime and QDateTime code to be more consistent in ISODate and
TextDate behavior, especially when handling TimeSpec.
Reformat some code so all methods are consistent in appearance and
function to make maintenance easier.
This changes some corner-case behavior in TextDate and ISODate, but
this either fixes bugs or makes the behavior match the documentation.
Change-Id: I457aa1d7cd4f448cd9f8a2e80ec635f3cb98e58c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Switch the implementation of toString() methods in QDate, QTime and
QDateTime to use the QLocale formatter, and remove the now redundant
QDateTime formatter.
Change-Id: Ie4f17c8a6e31acde3ce066f19835bb2b83351ce8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Modify the QLocale date formatter to be consistent with the QDateTime
date formatter and able to replace the QDateTime formatter in a
subsequent change.
Fix the treatment of negative years.
The internal QLocale::timeZone() has been replaced by the
QDateTime::timeZoneAbbreviation() to ensure the correct tz for the
date/time is used rather than always the current system default.
Change-Id: I2ef26700856e2e69b979069226aa504ecbb50071
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
this enables forwarding standard input from the parent process.
Change-Id: I7ee72b9842acc96320d4da693b95dd15d9a7b4d4
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The destructor of the ConverterFunctor calls unregisterConverter. If
the instance is static (as it is in qmetatype.h), then this method
can be called after the QGlobalStatic has already been destroyed.
Change-Id: I33b70734cbe09dfa888e887280c349e43ad1b855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
forwardedChannelsOutput() actually tests forwarding. also having the
older test only eats CPU cycles.
rename the new test to the old name for clarity.
Change-Id: I16a326c8692bb594d7df7897bc53d31b23c66d90
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
close stdin and let the process finish right away instead of first
waiting for a reaction (which is not supposed to come) and then
finishing.
Change-Id: Ifcf200eead5ed95217843e105f9d2dbb5398d646
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
§24.4.1 [iterator.traits] of N3337 makes it *mandatory* to define the
various types
std::iterator_traits<Iterator>::{value,pointer,...}
for any given iterator.
§24.4.1.2 makes it enough to define them within our iterator class.
Change-Id: I1305c8392d224889b09395e30ecc77b194020a15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 5b9006bbdb.
Also revert "Doc: Enable documentation for QScopedPointer's rvalue ref functions"
This reverts commit 5f8416ec65.
Adding a move contructor to QScopedPointer makes no sense, because moving
means 'escaping the scope', which breaks the fundamental point of
QScopedPointer.
Change-Id: I4ac1b108bf199af6e436fa1629aa2d3b93c27724
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Layout items with a Preferred size policy would be treated as fixed
size if they were in the same layout as an Expanding item (or one with
a stretch factor).
This occurred e.g. if a layout was configured similar to this:
1. One item with ExpandFlag/stretch but with a maximumSize set,
e.g. (100x100).
2. Another item with 'just' GrowFlag, and a maximum size bigger than
its size hint.
If the above layout was resized to e.g. (200x50) it would cause the
expanding item to correctly get the size (100x50), but the 'growing'
item would not stretch beyond its size hint.
Instead, it would distribute space around both items, behaving as if
the 'growing' item was fixed'.
The expected behavior is to continue to grow the 'growing' item after
the expanding item has reached its size limit.
Task-number: QTBUG-33104
Change-Id: Ie410653d905f7ca4d702528dafb269f30a0e4f61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Currently there is no API to extract the meta data
from static plugins. This is needed in e.g QtDeclarative
for loading static module plugins.
This patch moves the 'staticPlugins' function from
QLibraryPrivate into QPluginLoader, and makes it public.
As such, we now also export QStaticPlugin.
Since an application developer cannot do much with raw
metadata, we add a new function
QStaticPlugin::metaData() that returns the QJsonObject
for the plugin. The old metaData function is
renamed 'rawMetaData'.
Change-Id: Idb0bf9ad8ebb13340565512e1998b26e762a357e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a new method to return the time zone abbreviation for the current
time spec. For LocalTime this is the abbreviation returned by mktime.
This new method will later be used in changes to the date formatter
and QTimeZone.
Note this change does not implement WinCE support.
[ChangeLog][QtCore][QDateTime] Add method timeZoneAbbreviation() to
return effective time zone abbreviation.
Change-Id: I265a5e96c72eb7236974f80f053f1fb341e3c816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The implicitConstruction() test case will fail to compile if QCursor is
unavailable.
Change-Id: If26743995505a48da648a2fa2a498debec91c933
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When we auto resize it is handy to be able to limit the maximum
size (just like the minimum size).
[ChangeLog][QtWidgets][QHeaderView]A maximumSize for sections
has been introduced. The maximum section size is by default
the largest possible section size which in Qt 5.2 has been
limited to 1048575 pixels.
Task-number: QTBUG-4346
Change-Id: Ida9cbcc11bd5c4498e319df2e6379c69a7033c04
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCheckBox cycles through the 3 states, but item delegates didn't
do that.
Change-Id: Iad1e464341033ca357925fe8064f53bb584459f4
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QTEST_NOOP_MAIN was removed in Qt 5, but was still in the source of the
QProcessEnvironment auto test.
Change-Id: I0048c330c9d4e99c46192cc05ffd3b77d404fb6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
