This patch renames the functions in Qt5 according to the
notes. It also renames resizeMode to be consistent.
The old functions are both marked with both QT_DEPRECATED
and '### Qt 6 - remove'
All usage of the function within the qtbase are also
changed to use the new functions.
Change-Id: I9e05fa41d232e9ca43b945fcc949987017f3aedd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix compliation in LSB by removing legacy calls and adding an explicit
header.
Change-Id: I13a73211c07457195b5d5aad0854643da1e25f9b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
SHA for QWidget::hasHeightForWidth change:
466107107a
SHA for QAbstractItemDelegate::destoryeditor change
15f253a46a
Change-Id: Ic7e38c15f62eef22ab95414fad6e7b6c9c7d4f59
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is the approach introduced together with the WebKit "backdoor"
that lets us use QRawFont with QTextLayout. We could use it all
over the place and share more code.
Change-Id: Ie1963679755f37ba9204d67554a163f1d1115604
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Change-Id: I37f4086d53ce6f2d6774ab204808d0d678a68349
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QPollingFileSystemWatcherEngine inherits from QFileSystemWatcherEngine.
This class should be covered by !QT_NO_FILESYSTEMWATCHER.
Change-Id: I053a873018cf3c9c443435c9b3f44240b0965c24
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Don't use QWindowsFontDatabaseFT::systemDefaultFont() and
QWindowsFontDatabaseFT::LOGFONT_to_QFont() in qwindowsfontdatabase.cpp and
qwindowstheme.cpp because it is not available when building with
-no-freetype.
Change-Id: I11075475ff435c55b0c641540f95a4d3861b79da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Change 50ca45f059 caused mapped windows to not receive focus by
default. The _NET_WM_USER_TIME spec says that if the user time is set to
0 (or CurrentTime), the window will not be initially focused. Thus, if
the connection time has not yet been set, we skip this part to restore
the old behavior.
Change-Id: I19de3602c78629ad2bc65f5e1976313949c82c4c
Reviewed-by: Jan Arne Petersen <jpetersen@openismus.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Duplicated code was removed. As an side effect:
- one runtime flag check was replaced by a compile time check.
- is enum flag can be used together with built-in types.
Change-Id: I54173e7b07ce7e487d3cc21ba24dcccd28b5d049
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Changing .gitignore to match qdoc* instead of qdoc3*.
Change-Id: I94e41e6e4371c40e0dbc33639ca02523986149b0
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The QUDevHelper class is now replaced by QUDeviceHelper class.
All evdev input plugins are using the new udev helper now to enable
hotplugin for keyboard and mouse input.
EvdevTouch plugin still only uses the first detected device by udev,
this cannot be tested on my side, due to the lack of multiple touch input devices.
Change-Id: I01a4cfe1a80000bfb27c67a2f53faf560906b73c
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Resource files are expected to be readable.
Change-Id: Ife2b624e69b58e2fb996bc3e210a6e6c5c6852fe
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already commented out when the test was added to
the Qt repository and does not compile when uncommented as it calls
non-existant overloads of QtConcurrent::FunctionWrapper1::operator().
Change-Id: I5a02efae4b89e2815b077474aa7cd0192dcb2730
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
bad was: /qevdevkeybaord_defaultmap.h
good is: /qevdevkeyboard_defaultmap.h
Change-Id: Ic29bf94df0012e7ed3f05c0f258198d1b561d99a
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
When using stylesheets, palette mask for drawing the background
of line edit child of spinbox is already correctly resolved to style
options in QStyleSheetStyle::drawPrimitive(), so we cannot simply
ignore that mask and check the palette mask of the parent spinbox.
Fixed by using a union mask of the parent spinbox palette and the
palette supplied by style option instead of simply using the mask from
parent spinbox. If either specifies custom base color, use that to
paint the background of the spinbox's line edit.
Task-number: QTBUG-24323
Change-Id: I1e738192db83b16d9bd48da54d29779e18788ef7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
According to SQLite documentation, a database connection handle
is usually returned, even if an error occurs. This behavior has
caused Qt to leak memory when opening a database is failed. Now,
even if sqlite3_open_v2() does not return SQLITE_OK, Qt tries to
release SQLite database handle by calling sqlite3_close().
Task-number: QTBUG-15773
Change-Id: I6538e2897216828a9cfb95b7d4a5cec437aa6c28
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Not waiting until the QPA event queue is processed after
handleMouseEvent() is wrong. Unlike the synchronous sendEvent() calls
these tests most likely utilized earlier, many of the
QWindowSystemInterace functions are asynchronous in the sense that they
just queue the event, delivery will happen when the event dispatcher on
the main thread gets there.
Change-Id: I8197d2dc4805cda684a8279ceb8d4b317f19aba7
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This is pretty much the same fix as in
be0dfa3473 but for PairPos
format 1 instead of 2.
With very simple GPOS tables we would waste a lot of memory on
caching an uncompressed table, so we now compress it in memory
as well.
Change-Id: I601331b4b83f636dab9e1ac403b343558c15b0de
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
When a C++ class is documented as a QML type, it can
have overloaded QML methods. These are now handled
correctly by qdoc. The method list for QML types is
now output with the full method signature. For signals
and handlers too.
Task-number: QTBUG-24670
Change-Id: If529d4136f5b480373b6ac25d2dceef15e6ea3db
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Each channel will create a socket that will allocate memory for the
read and write buffers. This change will instead initialize
channels only when they are needed.
Change-Id: I112b4c7b944a7dd345414f06260c92803394eaed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This change sets some default file extensions to accept to generate
documentation. It also removes support for the sourceModules qdocconf
variable which is not used anymore. It was used just after
modularization.
Change-Id: Iabdcfb534dc662bd44e0928036fd68ee4e460b07
Reviewed-by: Martin Smith <martin.smith@nokia.com>
OS-X provides a buttonNumber within Event data for otherMouseDown:
and otherMouseUp: Events. Instead of mapping all occurences of these
event types to Qt::MiddleButton, this Update uses that data
to support a total of 16 mouse buttons.
Task-number: QTBUG-24702
Change-Id: I3cffb32498f98ea182509d7c42f3fc6634155ebb
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
There is no reason these interpolators need to stay in QtWidgets library.
Change-Id: I27db49fea2cfd8f0ef417dc52edf66dd1835e7a1
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
Consider if the hinting preference of the QFont
is not PreferDefaultHinting.
Change-Id: I0f50b320356787b6c1eabee5f009e7d326a06925
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
It is possible that although a qsf cache file could be opened that it
could not be written to, therefore it should clean up after itself in
these cases so that it does not cause a problem later on.
Task-number: QTBUG-24122
Change-Id: I1999759837607657ddc3f967eeda370ce9991a16
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Checks if model has any changes to submit.
Includes new test covering isDirty(index) as well the new
overloaded function.
Task-number: QTBUG-3108
Change-Id: I0ccbda45d5d9f06434cf1e1c037a9efb76d0cc37
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
1. QJsonParseError::MissingObject defined
2. QJsonDocument::fromJson() will result in defined error after parsing
of something like "{ 'key':1 , }" or "[ {'key':1}, ]"
Change-Id: I8e6234a03b8aca4e5ad6180f273f91066b86d7a1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Removing (some) stale assumptions about dependencies from src.pro file
Change-Id: I713e3ad8c164321ef035e6c62b25e18e45d1d3ef
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When cross-compiling, check for PKG_CONFIG_LIBDIR instead of
PKG_CONFIG_PATH. pkg-config searches for pc files in PKG_CONFIG_PATH
*and* the compiled in defaults (/usr/lib/pkgconfig). This means that
pc files from the host get found when cross-compiling.
Setting PKG_CONFIG_LIBDIR makes pkg-config search only in the path
set in PKG_CONFIG_LIBDIR.
Documented in the url below:
http://www.freedesktop.org/wiki/Software/pkg-config/CrossCompileProposal
Change-Id: I22dbf29c5691572b7cb8a5fce712ae7ba811670e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The webkit AtomicallyInitializedStatic and Qt's Q_GLOBAL_STATIC can
deadlock on the Mac, as the mac compiler inserts calls to
__cxa_guard_acquire and __cxa_guard_release around initialisation of
local statics.
In Q_GLOBAL_STATIC case, this is the QGlobalStaticDeleter local static
Whereas webkit AtomicallyInitializedStatic is a local static variable
in any case.
Problem is triggered because webkit constructs QNetworkConfigurationManager
inside the constructor of a local static - networkStateNotifier
And the generic bearer plugin calls QNetworkInterface::allInterfaces
in the bearer thread, which needs an initialised Q_GLOBAL_STATIC.
Reviewed-by: Laszlo Agocs
(cherry picked from commit 38db40d9a2db44e47b0aabd9487284cd1106b353)
Task-number: QTBUG-24554
Change-Id: Id2c7818faefb46e66b0bbc30ce30595d46d53016
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
Config checks are done in the module.
We pick up the pkg-config stuff also in the module. There shouldn't be a
need to do this in configure anyway
Change-Id: I9ef73760511c6b684c6cd5dd13e7e581c588e7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove its dependency on QtSvg by converting the icons to
(optimized) png files.
Change-Id: If63257938dc816d7ab76a3042b9ac88ef3d51b07
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
No longer base the implementation on a QWidget which is not
necessary when all that is required is a message window listening
to task-tray messages. Export a service function creating a message
window from the Windows native interface and use that.
Task-number: QTBUG-20978
Change-Id: I01d0faeac777df4eee802c51d2bc722fce814080
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
