This is causing compilation errors on some Windows CE
configurations:
mainwidget.cpp(130) : error C3861: 'setlocale': identifier not found
mainwidget.cpp(149) : error C3861: 'setlocale': identifier not found
Change-Id: Ie863cd7c9c53cfef4074dabffe157d9068654a1c
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Moved codecs folder to qtbase/examples
Corrected quote in dropsite.qdoc
Replaced snippet statement by include statement
Added doc for undocumented parameters
Task-number: QTBUG-34749
Change-Id: If4de95b8d39e5680fd0f63f8d2b6685a4b0a8052
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
No reason to restrict it to desktop only, the code works on ES2 too.
Task-number: QTBUG-35730
Change-Id: I915a88cbf3c95a941d6bafd88ed57fef0b6a25b9
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Platforms like eglfs will not allow opening more than one OpenGL-based
window. To prevent aborting the hellowindow example when invoked without
--single, enhance the capability check to include also WindowManagement
in addition to ThreadedOpenGL.
Change-Id: I147d90b31d9fd94912c36339d36af3f311aaa874
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
sub-attaq/boat_p.h:134:9: warning: private field 'key' is not used [-Wunused-private-field]
Change-Id: I3f4cb1325aaac71d2bf0e7807381742937d173f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This introduces the ability to indirectly invoke all common GL1-GLES2
functions via QOpenGLFunctions. The GL1 functions are not yet resolved,
since this would not work anyway when linking to an OpenGL implementation
directly. However this may change later but that will be a completely
internal change without affecting any public APIs.
Also migrate some of the opengl examples to use QOpenGLFunctions for
everything. Once dynamic GL loading becomes available on some platforms,
these examples should continue to function without any changes since they
do not anymore invoke any OpenGL functions directly.
Task-number: QTBUG-36483
Change-Id: Ie630029651e5a4863a480aac5306edd67ee36813
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Remove the opengl proxy for now. Later it will either be moved into
a separate library or replaced by a QOpenGLFunctions-based approach.
This means that the -opengl dynamic configuration is not usable
for the time being. The rest of the enablers remain in place.
The convenience function QOpenGLFunctions::isES() is now moved to
QOpenGLContext and is changed to check the renderable type. This is
extremely useful since besides supporting dynamic GL it solves also
the problem of GL_ARB_ES2_compatibility (i.e. it triggers the real ES
path when creating an ES-compatible context with a desktop OpenGL
implementation).
Task-number: QTBUG-36483
Task-number: QTBUG-37172
Change-Id: I045be3fc16e9043e1528cf48e6bf0903da4fa7ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Besides serving as an example for performing OpenGL rendering inside
a window container in a way that it works across all GL versions,
this is an extremely useful tool for developers and users alike
since it allows quick and easy checking of what sort of context a
particular driver returns for a particular QSurfaceFormat.
NB! Depending on the OpenGL driver, some surprises can be expected.
The handling of core/compatibility profiles, the fwdcompat bit,
the supported GLSL versions, etc. tend to be somewhat different
across the different OpenGL implementations.
Task-number: QTBUG-37071
Change-Id: Iae4328e66cd0bb19f74a77fefef93ea5a3221e31
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This patch ignores:
- Docs for obsolete types themselves
- Comparisons between new and obsolete types
Change-Id: Id9b1e628255113e7c44520abe0f8a4e0db4a283d
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Task-number: QTBUG-37027
Change-Id: Id18ee9c44650de9c434a82d3d10cf48e6ba9e78c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
'styles' are only defined in the qt build internals, when the
examples are compiled inside a configured Qt source. That's not
the case for the examples e.g. in the Qt SDK.
(windows is a default style on all platforms, anyway. So I
think the check is superfluous in the first place.)
Task-number: QTBUG-36655
Change-Id: I7114619efd479408dad99c8514f8e33ddcab7c7c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The screenshots were taken on Windows 7 with the Aero theme.
Change-Id: I2517664e25389f4fb87408daec7b720dfb785bf0
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The screenshots were taken on Windows 7 with the Aero theme.
Change-Id: Ief04c3a9c0084a778606ba72f1f3199119d5c64e
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Links fixed: Extra Filters
Basic Tools
blockingfortuneclient
Thread Support
Drag and drop examples
qBinaryFind
qmake common project types
imagegestures
Task-number: QTBUG-34749
Change-Id: Ib93dda00716dc596db327fee5b97e110a9f27fa7
Reviewed-by: Martin Smith <martin.smith@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix some spelling and grammatical errors in comments that show up in Qt documentation. No changes to code.
Change-Id: I2e946fda0bd9a2117f8e9b2fb300df9bf0a98a6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Task-number: QTBUG-34749
Corrected link to drag and drop example.
Corrected link to {mandatory fields}
Created target referring to macros for defining plugins
Change-Id: I387a2d9bab428b2eacd8d371f08c72f42f7e2be2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Moved qdoc and image file to correct qdoc folder.
Added brief and ingroup statements to books.qdoc.
Task-number: QTBUG-34749
Change-Id: I5806ffd6f116cccf10238e3e1a9fc627ad0e93a9
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
glViewport expects device pixels, but the various
geometry accessors returns values in device-independent
pixels.
Change-Id: I8004692de82251e4f1f25bf8f2698895f222ede3
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Updated dnslookup example to take an optional nameserver argument
for doing DNS lookup against a specific nameserver.
Task-number: QTBUG-30166
Change-Id: I9f46f9f766b56f770d2c8372e3bfad5c71023c73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Example 3 (Clock) is a collection of anti-patterns.
- It implements a slot in a QThread subclass and then forces the new
thread to use Qt::DirectConnection to invoke the slot in the
"wrong" thread.
- It talks about getting away with non-thread-safe usage
- It uses a thread as a timer and then admits that it's an over-
complicated approach.
- Example 4 (Permanent Thread) is over-complicated yet incomplete. A
better one exists in the QThread class ref.
- Example 1 (Thread Pool) is covered by the QThreadPool class ref.
- Example 2 (QtConcurrent::run()) is covered in the "Threading and
Concurrent Programming Examples" page and the "QtConcurrentRun" page.
- The undocumented "Hello Thread" example is covered in the QThread
class ref.
- These examples cannot be accessed from Qt Creator's Examples tool.
- These examples are neither widget-related nor tutorials, contrary to
their source paths.
Task-number: QTBUG-33360
Change-Id: Ic79cb764ee925ddbcbeafee8e1d01db7fe0f6cfe
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
[ChangeLog][QtWidgets][QAbstractSpinBox] QTBUG-5142 - This will
allow a group (thousand) separator to be shown in QSpinBox
and QDoubleSpinBox widgets.
Task-number: QTBUG-5142
Change-Id: I2e23f5f83c93bb092a2dbd784e06d17d40d42909
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The Qt Simulator is no longer supported with Qt 5.
Change-Id: I0f98351d482dd0554ea0754746d56f94ee6bf22f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This would be the case in most if not all the real life use cases.
Change-Id: Ib7ebc6dbe471ce50f4bd1df9becba8e9806008e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
WinRT doesn't support QProcess, so the network-chat example shouldn't be
built there.
Change-Id: I7885a992d3b8baffd5530c694063140535240f07
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Also adds examples/widgets/mac subdir for Mac specific examples,
starting with one for this feature.
Change-Id: I4cc7d84ce3d7562259d6206faa5d6996c2392a3e
Reviewed-by: Liang Qi <liang.qi@digia.com>
- Incomplete: It doesn't talk about how to use a raw QThread, or
QRunnable, or Qt Concurrent.
- Redundant: Its contents are already presented in QThread's class ref,
and the line before this section links to the "Multithreading
Technologies in Qt" overview page which provides a more complete intro
Also remove snippet markers that are no longer used.
Change-Id: I89b7bd72f10c8ffdfd9b7772e2493050aafc9c88
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Demonstrates that you can have mnemonic buttons which don't
conflict with the Ctrl-A and Ctrl-C shortcuts.
Task-number: QTBUG-6731
Change-Id: I41ce64e6f3bd0cf387af13c5c37894b721b5a3bb
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Demonstrate the new side widgets feature of QLineEdit.
Change-Id: I1c4289c652abf2209e50601871249008fdec4f6b
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Similarly to qmlscene, multisampling will only be requested when
passing --multisample on the command line. This is useful because (1)
multisampling is not really needed by this app and (2) it helps with
broken drivers that advertise MSAA configs but break when using them.
Change-Id: I50ff0db80843f488899901ab796eee588b62078b
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
The windowcontainer example utilzes the openglwindow example, so it
must also check that OpenGL is available.
Change-Id: I7ecb372cfd533bb56effe7c61ebee9bd53de4c54
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A wrong code path caused the textedit example to attempting to try to
save the file it was currently editing even if it was loaded
from the resource system.
Task-number: QTBUG-33105
Change-Id: I9e03168968a98a421e8ab93a8d06f808b72ac3b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Compilation was failing when compiling with -no-opengl
Task-number: QTBUG-32712
Change-Id: I7c3f7c6be542aa79afa20d8563565fd477cc053c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Documentation is generally not translated, this one sticks out.
Task-number: QTBUG-28535
Change-Id: Ib2cdbc8c94a6354af3369ff2dcf4df69cde4c381
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
There wasn't any example documentation besides json.html, which doesn't
actually describe usage of the various QJson* classes.
This also makes each QJson* class page link back to json.html.
Change-Id: If5ad6493d2728df0cec7bdbbc5790f0b755f816c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Several instances where \page and \example are
corrected by removing the \page and leaving the
\example.
Task-number: QTBUG-331578
Change-Id: I95373c2d209698b68197bb9c95ef0c41e64c55d3
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
These constraints were adjusted in qt4 commit 3abaecc in order to make
the dialogs fit Symbian/Maemo screens. These are not mobile oriented
examples and it breaks resizing behavior on desktop so badly, that
we will simply revert the constraint changes to make the dialogs
respect their minimum sizes.
Task-number: QTBUG-31351
Change-Id: Ibf358ddedadf05614ef7a66b6a98fe5d7073996f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
And update the opengl/grabber example.
Task-number: QTBUG-31173
Change-Id: If09f1f3634b353d034f51240fc68be6ee7aabb48
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Depends on I8e81a0c6af61df1c4497a5934e2b89bad6f616f0 to properly
render the overlay.
Change-Id: I7ef6b726cc06eb750e7c00beb4ec6e80e85866a1
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QtWidgets/Drill Down example uses images and information about Nokia's
old office locations as content. This change updates the example to
use concepts related to Qt instead.
In addition,
- Documentation, screenshot updated accordingly
- Corrected aspect ratio when scaling image items in the scene
- Added a gray background with a slight gradient
- Removed Symbian-specific code remnant
Task-number: QTBUG-31075
Change-Id: Id8abfbf7f4033f74172477570f8f28390854101c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
These two widget-based, mobile-targeted examples are obsolete, defunct,
and/or serve no purpose in Qt 5.
Task-number: QTBUG-31023
Change-Id: Ie5732734bb2547b1ea701d7b3c8dcd806362de09
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Modularized example paths are defined in module-specific .qdocconf
files. This change fixes \example command for a number of examples to
be relative to those paths. This way, the manifest files will have a
correct project path for each example.
Change-Id: I6d3dba34a1eb04a2bc294520102e232ccd0f0ba2
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Provide a new displayIntegerBase property which control the base used
by the spin box to display the value in its internal line edit.
Change-Id: Ibadc37107db8770d757b64350946bf19142e8f6c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Previously resizes along with the animation was implemented using queued
signals and slots, potentially causing a huge lag between the size of
the window and the rendered contents. Now the animation is always driven
by the rendering thread and is triggered based on the window's
isExposed() status.
Change-Id: Ifd89a63c2a436671a7b15326ff56be9ec2a5362d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This patch adds SizeAdjustPolicy to QAbstractScrollArea.
If it is set to AdjustToContents it will make use of the new
protected viewportSizeHint() (BC since it was reserved in Qt5).
This function returns a suggested size based on contents.
Change-Id: I5d8aa517e88b8b21c5712e62b4d574c3aad99d3b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the plugandpaint example statically links to one of the plugins, so
there is a build-time dependency.
Change-Id: I9c77b5641028e6b958ceeea56c606bda59f396b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
somehow this was missed when the source installs were automated.
Change-Id: Ic842fd9ac221cb3748b5a6369eacf8a55f8d8d4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A number for groups, including 'all-examples' was defined multiple
times by some examples. This change fixes the incorrect
definitions.
Change-Id: I2fb5da11e8762698942a076e0f0576033ce3cabc
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This change fixes two issues in the torrent example:
- Correctly use a query constructed from the announce url to fetch
the list of peers (using QUrlQuery).
- Reimplement QAbstractSocket's connectToHost() and
disconnectFromHost() which are virtual in Qt 5, instead of
of using the protected connectToHostImplementation() /
disconnectFromHostImplementation() slots.
Also removes a warning about deprecation of QHttp class as it's no
longer used in this example.
Task-number: QTBUG-30329
Change-Id: I9230cd2204bfc1a66f2ea3e98940b09681df250e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Make sure that people get an understandable error message when
trying to compile the boxes demo with e.g. ANGLE.
Task-number: QTBUG-30406
Change-Id: I0ba0e26e424d768f95d7977862d9f2c4e85b41fb
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is useful when the widget is focused by default, and also gives
another opportunity to the user to read the message before typing,
removing the need for workarounds like clicking in another text entry to
bring back the placeholder message.
Change-Id: I4a2981a6656a87934b5c8ed4a8a2dc13b748c94d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
the top-level project is not installed, and the meta-project which is
used instead does not know anything about conditionals.
Task-number: QTBUG-28414
Change-Id: Id5785ab5f92373ece74699e3c28220fc7f9689ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentationhttp://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Adds two images missing from Completer example documentation and fixes
typos in \ingroup parameter.
Change-Id: I2a9c1a22c65145dba37b182a82c19f4f0e424ca7
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
A QWidget that can embed a QWindow. This can be used
to embed a QWindow/QOpenGLContext based window or a
full QQuickView.
Change-Id: I8415b5ae38562fc00b46150fa70b56fd9b19a80c
Reviewed-by: Jørgen Lind <jorgen.lind@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This example is hit by the infamous QTBUG-13496 issue.
Task-number: QTBUG-28665
Change-Id: I9bcffe72d34b1eaa9f5beafc69a16913a597d17f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
move QT+=widgets (and printsupport) statements before the install
statements, and de-duplicate some cases.
also move some TARGET assignments to a more conventional place.
Change-Id: I6140d8611680f66c24490e5894e4eb90cae95635
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These OpenGL examples require a Desktop OpenGL and will
not build with OpenGL ES 2.0. This means those examples
do not build on Windows with the default configuration
using ANGLE.
ANGLE is wrapping OpenGL ES 2.0 to DirectX and does not support
the full Desktop OpenGL feature set.
Since this is confusing for Windows users that do not know about ANGLE
this patch adds an explicit error message describing the solution.
(configuring Qt with -opengl desktop)
Task-number: QTBUG-28590
Change-Id: I782e6830b9e282ddcc8a2ee0a47faf3579d36aab
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Symbel from external-resource.qdoc not working,
so replace it with the url.
Corrected in mandelbrot.qdoc
Task-number : QTBUG-27512
Change-Id: Ibf54bf707deb73f1cf22d347839dcd347382ecd9
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Url for OpenGL Registry
Url for Khronos OpenGL ES API Registry
Change-Id: I682ddcedf1e06d589e5c44e364936c78fd9219a5
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Linguist examples are now in qttools.
Change-Id: I8abfff50d81cda143a080711bf9583e7be777009
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Remove docs and images for Multiple Inheritance and Text Finder
examples that were moved to qttools/uitools.
Change-Id: I29e8f76b2512e329c354a6d3676c9b2e09e35726
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Schulz <david.schulz@digia.com>
Add Display and QDebug() of Qt::MouseButtons values. (I.e., Buttons
believed to be in 'Pressed' State by Qt.) Assists in platform plugin
mouse software debug.
Task-number: QTBUG-28603
Change-Id: I4a7a3ac44a8cc7eb1eceb9f348493b58b12dbd69
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This increases consistency a lot: all windows and dialogs from a Qt
application will show the app display name in the caption, on Windows and X11.
This helps identifying which app a dialog belongs to, which is especially
useful when the dialog is very generic and shows up unexpectedly.
For compatibility reasons, the app name is added to the caption only
if setApplicationDisplayName() was called -- or if the caption would be
completely empty. The standard Qt4 case (setWindowTitle + no display name)
is unchanged.
Change-Id: Ib284c62c1f4c0bc923e5bc2d10247d95e9aa76c1
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
It makes this example more complete since we move
linguist related examples into qttools
Task-number: QTBUG-28434
Change-Id: Ic6bbbd2702b5a0a304b5e8ce59da37ef95e4b42e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
generally, don't install anything from the top-level examples dirs
automatically. the global README and the aggregator examples.pro are
installed explicitly.
Change-Id: I5f6b8760f37d917b800fa85979896a471778cac0
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
- Moved documentation for the Qt XML, Qt Widgets, Qt Concurrent, and
Qt Network examples from qtdoc.
- Grouped the documentation pages under relevant groups
- Fixed \snippet paths
Task-number: QTBUG-27515
Change-Id: I43c22a679e2eefbb48e3cd5893aa2afd3d905863
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Make the same layout of the new graphics view example documentation
as we had before (except by using annotatedlist instead of hardcoding
the links). I've also moved four examples from qtdoc to qtbase so
that they can be included in this documentation.
Change-Id: Ic2202ade119cadd98d036f1bd77e91dae49b5677
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This eliminates seven EXAMPLE PATH DOES NOT EXIST warnings.
Change-Id: Iaa6267138a1799fb775f0034805d5691bfa40d7c
Reviewed-by: Christian Stenger <christian.stenger@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Move the main example overview and use the \group tag convention
to make the list update automatically.
Change-Id: Ib2cc8cf7def9a7f3dce6b7ed6d4958771cbdf5cd
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
It didn't match the reality any more (now it shows an IP address
as well as the chosen port).
Change-Id: I7b942313ad5246a72186e3b9c93e54af8ab7a5ae
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
... and add description for Q_PLUGIN_METADATA
Change-Id: Ie389787df53d3cdfa27ba8fb0e77f32df1597c4f
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
I remove the widgets examples from the gui docs as they will
introduce broken duplicates (under doc/qtgui/...).
Change-Id: I54255ceaf4187477da3e82f6809be41fb98378a2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The arthur style set the background color to a bright color
and leave the foregroud color, for example for text, untouched.
If you are using a color theme with bright foregroundcolors on your
system this will result in unreadable text on push- and
radio-buttons.
The function drawControl is now reimplemented and the labels
with text are drawn with an appropriate color.
Change-Id: Ifd7f3a2b1c0305130255009c7733e0966830171a
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
it's confusing for the users if the examples' project files contain code
to install their own sources. also, this constitutes an enormous code
duplication, and lots of mistakes. consequently, automate it.
more or less as a side effect, this also removes the entirely meaningless
target installs in subdirs projects.
Task-number: QTBUG-28184
Change-Id: I9fc1367a06db9e2c46aeb67d68729a4f67163ef9
Reviewed-by: hjk <qthjk@ovi.com>
To fix a build problem when plugandpaint is not built with qt src.
QT_BUILD_TREE is not set in this case. We use a relative path instead.
Task-number: QTBUG-28261
Change-Id: I2456614070f0849ba9400fbe4b76172189e3925f
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
That is used by qdoc to generate brief descriptions for the example
manifests.
Change-Id: I142a6d3259f90d0c9990033b3c36e139062ac343
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: hjk <qthjk@ovi.com>
to make the source and install locations consistent
Change-Id: Ifde8748eeab843b06bf79f941fa4789b5b68cca9
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
somebody who cares can find the information in the git log
Change-Id: I97dff4ab33a773247e1320ba6491e6377a2b94e7
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
they were added without an explanation, and they can't be particularly
useful (because they contain hard-coded paths and refer to non-existing
icons).
Change-Id: I27e2c35375e28645b0c03449ddc7ac7017da5943
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
QWindowsStyle will soon become an internal class, inherit
SimpleStyle from QProxyStyle. The documentation has been
updated accordingly.
Change-Id: Ib55f59729e980b93276e9c2903f13b5e46612ac8
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The QStyle specializations are being made internal. The recommended way
to customize styles is now to use QProxyStyle (& QStyleFactory), or to
implement a full custom style one can alternatively subclass
QCommonStyle. The proxy style approach was chosen for this case, since
the example assumes some drawing functionality provided by the windows
style and it is not a "complete" custom style implementation but more
like a customization anyway.
Change-Id: Ib2477339cfef258cfc944a76a2eea728066e1f45
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The QStyle specializations are being made internal. The ArthurStyle
does not seem to require anything from QWindowsStyle, but QCommonStyle
as a base class gives just as nice looks.
Change-Id: I5ad8dd881e03f166ae5d3aedccb2688952dc0a28
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This makes the structure of the examples after an 'make install'
similar to the one in a 'developer build'.
Change-Id: I9120bd741fab332e64e30adc01cefe87e5633454
Reviewed-by: Martin Smith <martin.smith@digia.com>
The old implementation is just not acceptable!
The new one is able to distinguigh locales by script.
Change-Id: Ic772f6da8744825080f739e64af00267e5f82434
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
examples/widgets/animation/easing was spitting out a lot of
"QEasingCurve: Invalid tcb curve" warnings.
The reason was that in case of the TCP curve we do not provide
defaults.
The function createEasingCurve() now provides reasonable values
for the custom curves to show what is possible and how to use them.
Change-Id: I880d8d0f0ce2872ce2019f7d2e000f4c4ce136e2
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove artefacts from pointer.png.
Replace several PNGs with images without artefacts (used FreeSerif as
the font).
Stopped scaling images up in MainWindow::createColorToolButtonIcon.
Change-Id: I7adf2deea73b89c631d39d575804e8d3f58c9fe1
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
windowTitle, windowModality, windowIcon and so on are named that way
to be similar to the ones in QWidget. However QQuickWindow inherits
all of the declared properties, and we would like to have shorter
property names in QML. If you are working with a Window then it's
obvious the title property is the window title. Unfortunately,
there must be patches in many other modules which depend on this one.
In order to avoid the need to merge them all at the same time,
there is also patch https://codereview.qt-project.org/#change,39001
which temporarily adds backwards-compatible accessors, which can be
removed after the other modules are able to build without them.
We should not rename windowState to state, because in QML, state
usually drives the state machine for animation transitions etc.
(although QWindow is not an Item, a user might get confused about it).
Related patches are
https://codereview.qt-project.org/#change,39001https://codereview.qt-project.org/#change,37764https://codereview.qt-project.org/#change,37765https://codereview.qt-project.org/#change,37766https://codereview.qt-project.org/#change,37762
Change-Id: Ie4424ec15fbdef6b29b137f90a2ae33f173edd21
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The example was creating a new timer on every expose event, which
quickly leads into massive excess of timeout signals.
Fixed by only creating one timer.
Task-number: QTBUG-27836
Change-Id: Ia6ed1bd9575e296f4c6c5b12509095e4d5c016dd
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
In addition to the actual removal of the softkeys API in QAction,
this commit removes some enums related to the softkeys feature:
Qt::WA_MergeSoftkeys
Qt::WA_MergeSoftkeysRecursively
It also removes some "zombie" enums:
Qt::WindowSoftkeysVisibleHint = 0x40000000,
Qt::WindowSoftkeysRespondHint = 0x80000000,
(The only implementation that used these were removed when
qapplication_s60.cpp and qwidget_s60.cpp were removed.)
Change-Id: Ib6fc6d543def4757383d5f19256199d9d190c614
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
It seems this is the pattern to follow:
landing page: qtwidgets-index.html
examples page: qtwidgets-examples.html
class list page: qtwidgets-module.html
Change-Id: I3e5459fe650178e0398cb43181b594c0f12a170e
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
- Move dnd docs and examples out of QtDoc module to gui library in QtBase
- Remove info related to Motif dnd since Qt5 doesn't implement it
Change-Id: Id7eb4eb422f4294a36dd92709ce3007903371f03
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Proper variable initialization should fix crashs and black screens for
that example.
Task-number: QTBUG-27281
Task-number: QTBUG-27021
Change-Id: I538f233ea3c2faf6c1864c46be0d03828e92a110
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: I66d941a5fa7ed8046a3498686432450018a8dfaa
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
Reviewed-by: Akseli Salovaara <akseli.salovaara@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: Ia683171b30b5bf7cedb56cc3087b4b68644a3da1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The links are from the qt-webpages.qdoc and no longer exist.
Change-Id: I8329032215fa77811117e2767bae745795b209cb
Reviewed-by: Martin Smith <martin.smith@digia.com>
They have unexpected results in Qt 5 (the Qt::GlobalColor one works
as expected in Qt 4, but was removed in Qt 5):
QVariant v = QVariant(Qt::red);
qDebug() << v; // QVariant(int, 7)
v = Qt::red;
qDebug() << v; // QVariant(int, 7)
The correct way is to use:
QVariant v = QVariant::fromValue(QColor(Qt::red));
The deleted constructors are the ones for which there is a class
with an implicit constructor taking the enum, and that class is
a built-in metatype.
QLocale::Language and QKeySequence::StandardKey would also fit
the description, but I can't include the header for QKeySequence
as it is in QtGui, and I don't want to include the qlocale header
in qvariant.h. Putting a QLocale::Language is probably very
uncommon anyway.
The QTextFormat test is doing the wrong thing, but the result isn't
being tested. Added new tests which fail before the patch.
Change-Id: Ia38a0784990f4d40ff7457a86daf58aabd4964eb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We're setting the default texture unit anyway, and glActiveTexture would
require resolving through QOpenGLFunctions.
Task-number: QTBUG-24555
Change-Id: Id8d660baaa1532e7b8e623673f501703c76fac65
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Do not leak windows.
Change-Id: I3af29ce597742cbe6444208aa72443c0507819db
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Instead of having QGLPixelBuffer be a unusable stub implementation we
deprecate it and implement it in terms of QOpenGLFramebufferObject.
Framebuffer objects are anyway the recommended replacement for
pixelbuffers in modern OpenGL, as the context switching overhead is
avoided.
Change-Id: Ia220c358ee92813e87981d297c51d84525010322
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Loading examples.sln resulted in a cascade of error messages because
Visual Studio doesn't allow projects of the same name in a solution.
Now using QMAKE_PROJECT_NAME to give the projects distinct names.
Change-Id: Ifd3a00311253e4b234ece936092649ce0f0869d8
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I1d0c9782cc1522d937b930531720e32d4c8f7ce8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Change-Id: I846439a9cf7ad965ed27a00f98dbc4ff97abe73b
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Added suppport on QCocoaWindow.
Also we deprecate WA_MacNoShadow since it isn't used anywhere, and updated
the 'windowflags' example app.
Change-Id: Id0b453ba15a23b768b0615838597bca139f507ad
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Make C++ class constructors that can be used with only one
required argument 'explicit' to minimize wrong use of the class.
Change-Id: Ida9f9c2f0c8608c35b0137b2512a6747afd69515
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not compare a QString to "". Instead use the .isEmpty() method.
Change-Id: Ifda1361b2c288dd590f0294daacdf5e2d9241522
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Geir Vattekar <geir.vattekar@nokia.com>
All of these are very QWidget centric.
They cannot properly refer to the
sources without being part of the widget module.
This fixes around 300 qdoc errors.
Change-Id: I5a7c2dbc10f7913f7b088d6a0ac81323b3c287ac
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It's confusing when you double-click it and nothing happens.
Task-number: QTBUG-26976
Change-Id: I50c5625a41881bdbcbf29001197ed15da4ee0a28
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
This patch ensures that May 1st and the first Friday of each month also
have their formats updated when the corresponding checkboxes are
unchecked instead of just checked.
Task-number: QTBUG-26936
Change-Id: Ib5f77daf8d9000eeb18663b2e07e4842a70d22b6
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Gui example documentation should be in examples/gui/doc/
Change-Id: I3cd196a2bb5d76b6e275f336b29a2ad1811159dd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This example used to refer by default to qt.nokia.com.
Change-Id: Iecb682d0deb6270da91baf26897d44b16b39d09e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Widget examples were moved into a widgets subfolder, but
qdoc references were not updated.
Change-Id: Id2a4573e723745b9827c664c852807d6116f8f6d
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
\menu command has been replaced by \uicontrol in qdoc
Change-Id: Ib105df58c565c96b34579720acb62fe64e7806c4
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Updated those .qdoc files to refer to the new relative examples
emplacement. Images and snippets to be moved later.
Also grouped all widgets related examples under widgets.
Change-Id: Ib29696e2d8948524537f53e8dda88f9ee26a597f
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Handle 0 WId parameter as meaning "desktop window"/whole screen.
Also, re-add the default values for the grab area, both for
convenience and compatibility with QPixmap::grabWindow() in Qt4.
Update the screenshot example so it doesn't comlain about usage of
deprecated QPixmap::grabWindow().
Change-Id: I2ad229113ddb8ded0388f2ebc0e8c703c6657f1f
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
