When not doing fat builds, QMAKE_MAC_SDK_PATH defaults
to iphoneos sysroot, which breaks compilation.
This fixes compilation when user sets also CONFIG-=device
Change-Id: I1d18269946cd2a5608e26d943159c824f31db09a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Commit 4d289edb14 did disable debug-and-release
for MinGW completely. While it makes sense to change the
default, we should allow people to opt-in to old behavior
by explicitly setting '-debug-and-release'.
To allow differentiation between debug and release libraries
debug dll's (again) have a 'd' suffix.
Fixes: QTBUG-80792
Change-Id: I341b1a94788f490e975be6736159980cd9273f08
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When scanning the prl files to set up usage requirements for the Qt libraries
we omitted "-framework Foo" flags. Those were passed as linker flags, but not
as interface libraries. Consequently, the frameworks that are used by Qt
libraries were missing on the link line when building against a statically
built Qt.
Fix this issue by scanning the dependencies for "-framework Foo" just like we
do with "-lfoo" flags.
Fixes: QTBUG-80855
Change-Id: Ie7804304141c86207d143a6e1005e78bdc099113
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Kyle Edwards <kyle.edwards@kitware.com>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
The extra targets should be added to the project regardless so that
qmake can handle it appropriately. This enables make apk to work
correctly then from a SUBDIRS project.
Fixes: QTBUG-80351
Change-Id: If5903e0d2f543babfdb4ebbb13502e32ab97c6fc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Without this, the metatypes files are not installed if they don't exist
when qmake runs.
Change-Id: I014fcc1d1c41a7fab48870842f5e27f5b62dfed3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The auto-detection Xcode has for whether GPU capture should be enabled
always enables it for our projects, which adds up to second to the
startup time when debugging. There's no need to pay this cost unless
you're actively debugging Metal code.
Change-Id: I4a76c4e7afedad4bb43395ae64bc0f8d62eca6be
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Emscripten version 1.39.0 and above are based upon upstream LLVM, which
does not contain BINARYEN_TRAP_MODE
Fixes: QTBUG-80691
Change-Id: I6129f84a31a607c202e13847b50705ef1c809630
Reviewed-by: jian liang <jianliang79@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When passing the resources used to the android deployment setting json
file it needs to check the variable generated by the qtquickcompiler
feature so that it can still find the qrc files originally populated in
the resources. This ensures that qmlimportscanner can still scan the
original qrc files when determining which QML import plugins are
needed.
Fixes: QTBUG-80713
Change-Id: I695b289eaaa78cc6c355fa8abd22a8a1031a9f6c
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This creates a define in the binary, as well as writing emscripten
version for qmake.
It also enforces app builder to use a certain known version.
Task-number: QTBUG-77745
Change-Id: I37691512171635cec66aa3ffa16258081f3f1e1b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The xml_escape function must be part of resources_functions.prf, and the
qmake_immediate resource must not be created multiple times. Instead,
create another qmake_immediate resource with a number suffix.
This commit amends 577b6554.
Task-number: QTBUG-79672
Change-Id: Ibbe20c0fd1940f1fe7733cd1e5b0891f65689782
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Clamp mode was being obliterated by not appending to EMCC_COMMON_LFLAGS
This fixes crashes of integer overflow
Change-Id: Icae757a7189de25db5ed41df6d41d86304c39830
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use $$QMAKE_STREAM_EDITOR, instead, which will on Windows expand
to "qmake -install sed" (triggering qmake's own sed implementation)
and otherwise expand to "sed".
Change-Id: I57da5fb3a4f6e5a09ae25c947caa0a10d279b480
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
When doing a multi ABI build in one go, if the TARGET is the same,
we'll endup with only one library which is not okay.
Task-number: QTBUG-80351
Change-Id: I0c5ff24480446d671e59dbd5a045f9889dff39e9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Fix an issue where qmake on macOS will generate a Makefile with a path
to a macOS bundle instead of a bundle-less executable in the Makefile's
check rule if cmdline is specified before testcase in the CONFIG
options.
Fixes: QTBUG-80280
Change-Id: Icc9ee1355b0641981ce79526b36f29957e1afb00
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Our WebGL 2 support is half finished, since we use surface format verion of 3
to map to webgl2, but do not enable Open GL ES3 needed for WebGL2 support.
This allows glDrawArrays and glDrawElements to be used
Change-Id: Ifbd434f4d25e49f671145a6727999a90920d6810
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The system include paths need to be added to the include
paths passed to Clang so it can find the standard types.
Change-Id: I83e13e73a606130e3bc4762b01368bcd4a8bb0dc
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
After appropriate link flags are determined, they are added to the
INTERFACE_LINK_OPTIONS property. Unfortunately this property was added
in 3.13, and thus static builds on Windows for instance failed with
missing symbols due to missing system libraries on the link command
line, when the CMake version was lower.
When detecting a lower version, add the flags instead to
INTERFACE_LINK_LIBRARIES, which is a property that is available in
older CMake versions. To do this we have to strip the SHELL: prefix,
which means that the added link flags might get deduplicated, and thus
it can happen that the linking phase might still fail.
Nevertheless, on Windows this improves the situation when using an older
CMake version.
Amends 44602224bf
Task-number: QTBUG-38913
Change-Id: Ib710b8ea691d4a9281dcd5f5b9700b11df0a5c10
Reviewed-by: Kyle Edwards <kyle.edwards@kitware.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This amends commit 9864d2c6. Some variables that are set in
qtConfLibrary_inline were not exported.
Fixes: QTBUG-78873
Change-Id: I10d766c1f41d2baa61967ee931a6631346cac2e9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Adds instrumentation for fuzzing to the binaries but links to the usual
main function instead of a fuzzer's. The similar sanitizer "fuzzer"
should then be used only for building the test itself.
Requires clang 6 or higher.
Change-Id: I24ee1f018b0b97f2977dc86fbdc29a164d7c4e01
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The JSON collection step has to be target_predeps in order to be
executed if the only place its output is referred to is INSTALLS.
Furthermore, some CONFIG options clear the INSTALLS variable.
Therefore, we need to add the metatypes CONFIG entries after
those.
Change-Id: I4694ab1d82c13cb4e3886c1722a03255d14b7f29
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Otherwise we cannot find them when building further projects within the
same module. For example, qmlmodels needs the metatypes of qml in order
to build its plugins.qmltypes file, but the QML metatypes would only be
available after installing.
Change-Id: Ic2cdfa5b57fd3e5977eea16f2a9b192386737a1f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
With the qrcFiles entry in the deployment JSON for Android, it can now
pass this on to qmlimportscanner for scanning the qrc files for the
available imports. This enables qmake to populate the qrc files it has
referenced in the project, be it generated by qmake or added by the
user.
Task-number: QTBUG-55259
Change-Id: Ic512ce6f24508b3ea09ebdd07ac4446debfd9155
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake matches those targets in a purely lexical way, disregarding any
scopes. do_install is much too generic and clashes with another
do_install target in the qmltypes installation code in qtdeclarative.
Change-Id: I8edab329eacc548cee880a9182a1e5ae4dd095fb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If the qmltypes are generated by qmltyperegistrar, we should not offer a
rule to generate them using qmlplugindump. Otherwise we get warnings
from make.
Change-Id: Ifb88cbff8e6c577f9889ff3f071bf31f48f634ad
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The linker must not throw away the lto.o file. We now instruct the
linker to create a non-temporary lto.o, dependent on the target name.
In order to do that we introduce a new mkspec variable
QMAKE_LFLAGS_LTCG_SEPARATE_DEBUG_INFO. This variable can contain
single-$ variable references that get evaluated when loading ltcg.prf.
Fixes: QTBUG-72846
Change-Id: I0ea882628d63e5406ba0ee68c7435af597364b0f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When building an application for Android on Windows it is possible that
the command line will be too long when doing the link step. So the code
for generating a response file is moved to MakefileGenerator so it can
be used by the other generators easily. The same variables used by
MinGW can be used elsewhere then.
Fixes: QTBUG-71940
Change-Id: I6c331d12e9541a90a4a95e0154d0ea1c056489bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Per earlier discussions we bump the deployment target for LTS releases
and follow up by requiring the latest SDK available for building.
As layer backed views and dark mode is a lot more stable these days in
Qt and on macOS in general we no longer support the option to build with
the 10.13 SDK. A workaround in case this functionality is still needed
is to explicitly set the QMAKE_MAC_SDK_VERSION qmake variable, which
will tell the linker to write that version into the MachO header of
the executable, which will then be read by AppKit when determining
which features to opt in to.
Change-Id: Ied4f6d75b710505a5c440c990b82567bea780db6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Introduce resources_functions.prf with the test function
qtFlattenResources which ensures that RESOURCES has a flat structure,
e.g. only contains *.qrc entries.
This can be called by other .prf files like qtquickcompiler.prf
without disturbing the ability to extend RESOURCES in other .prf files.
Task-number: QTBUG-79672
Change-Id: I43246e40f5ea52a9d9c917a1bd781aeeb1304acc
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Change a1ea498789 did replace different pkg-config calls for
-L, -l arguments to one. Anyhow, it also removed the eval() call that
ensured that the return string was split by whitespace, meaning that
paths couldn't resolve anymore properly if multiple arguments were
returned.
Fixes: QTBUG-79668
Change-Id: I4091fea6891ef79836e05f8e87ffa9d69863a8f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CROSS_COMPILE variable wasn't picked up by the linux-g++ mkspec.
Now it's possible to cross-build Qt on FreeBSD to Linux, for example.
Fixes: QTBUG-79255
Change-Id: Ib1cd8ed3d5ef0af42f2d47af8f6d2c2ff5356adc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We set the macro for RDSEED because neither MSVC nor the Intel compiler
on Windows defines the macro. The implication is that when qRandomCpu()
calls qCpuHasFeature() in simd.cpp, qDetectCpuFeatures() correctly
receives the expected CPU features enabled in the build from
qCompilerCpuFeatures, namely CpuFeatureRDSEED (qsimd_x86_p.h)
Change-Id: I5741d4f956a93f21c358af8a4ee393c1741b85ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As described in QTBUG-72404, the android-clang mkspec has the gcc pch
style hardcoded for no reason. This change removes the respective lines.
[ChangeLog][qmake][Android] Remove gcc-style PCH directives from the
android-clang mkspec.
Fixes: QTBUG-72404
Change-Id: Iad42651e25ecce08eda7aa5fa8bbf531c9497896
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This flag is needed by LLDB & simple perf tools to locate the right binary.
Change-Id: Iffa1b0678663cfb9d1d699da5ad6fe672863918c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Building examples inside a Qt source tree is considered unsupported.
Instead of checking, whether the build is done "in source" inside the
source directory, we also have to check for "shadowed example builds" as
they are done by Creator. An example would be:
qtbase/examples/widgets/widgets/build-wiggly as a shadow build for
qtbase/examples/widgets/widgets/wiggly.
Fixes: QTBUG-76237
Change-Id: Iceb88af006fad249a4c13fa0b0345cf3f7086252
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We don't want the metatypes to be generated into the file system root in
that case.
Change-Id: I91bab20fa498de0f2918d8ee5b2f230cc0610aae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Starting with JDK 12, javac no longer supports source and target
version 6. This commit changes the source and target version to 7.
[ChangeLog][General]
Fixes: QTBUG-79094
Change-Id: Ife8966db01c68251de2fe85307de30c31e658172
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Leaving it empty resulted in errors from Xcode when compiling the app.
Task-number: QTBUG-25309
Task-number: QTBUG-74872
Change-Id: I61b0f47d754c5f5b181a6f918283d990458cc78d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 1d1ed01711)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qmake.conf(25) incorrectly sets QMAKE_CFLAGS_DISABLE_LTCG to -Qno-ipo.
The correct form to disable IPO on Windows with ICC 18.x and 19.x should
be: -Qipo-. The implication is that the CONFIG feature in simd.prf (31)
modulating the compilation of specific ISA optimized sources now
successfully disables IPO on intel_icl when needed.
Fixes: QTBUG-78976
Change-Id: Id691f69b909d2bbba77402ff4f0b17b3b07ad6f3
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This gives the user the opportunity to employ BASH_ENV to circumvent
macOS System Integrity Protection and set variables like
DYLD_FRAMEWORK_PATH.
Fixes: QTBUG-57204
Change-Id: Icd99d903a3be76fabd509e204ea61a254a96609c
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The Intel whitepaer[1] recommends using the RDSEED over RDRAND whenever
present. libstdc++ from GCC 10 will also use it in std::random_device.
[ChangeLog][QtCore][QRandomGenerator] The system() random generator will
now use the RDSEED instruction on x86 processors whenever available as
the first source of random data. It will fall back to RDRAND and then to
the system functions, in that order.
[1] https://software.intel.com/en-us/articles/intel-digital-random-number-generator-drng-software-implementation-guide
Change-Id: I907a43cd9a714da288a2fffd15bab176e54e1975
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
CONFIG(cross_compile) implies CONFIG(force_bootstrap). The latter is
errorneously used within qt_tracepoints.prf and to decide when
tracegen is to be build.
For the tracepoints, we just need to check if etw/lttng trace points
are enabled.
For tracegen, we don't need to check anything - it doesn't depend
on etw or lttng, it is just a code generator similar to moc or rcc
and should be handled like these tools.
Change-Id: I3784b37db10680efd0ed7ee7860059bdf62b4118
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This ensures that also linker commands like -pthread are returned.
Fixes: QTBUG-77159
Change-Id: If9ab3797ccfb52c6b96a4ab120c59fd8896d5466
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 4ddc50c0cd16ddd146ea9ea21d6565c8f4a5e2bc)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This variable was ignored for iOS projects, because the generated
Makefile includes xcodebuild.mk that defines its own default target.
Export PRE_TARGETDEPS to the Makefile before including xcodebuild.mk
and use it there for the dependencies of the generic build targets.
Fixes: QTBUG-41325
Change-Id: I5faa82e05570974b5a844ae95b0a012c3badc64a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The --output-json parameter will make moc produce a .json file next to
the regular output file. With --collect-json the .json files for a
module can be merged into a single one.
Task-number: QTBUG-68796
Change-Id: I0e8fb802d47bd22da219701a8df947973d4bd7b5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Is't been deprecated since Mac OS X 10.5.
Task-number: QTBUG-74872
Change-Id: I8b1ad7aca6448883cb164fd0c4b329592ca60548
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Android 5 doesn't extract the files from libs folder unless they are prefixed with "lib".
This patch sets a proper name for the plugin which will make gdb happy and it will also
avoid any name clashes.
If we rename the plugins when we copy them, gdb won't find them, therefore it can't load their
symbols.
On Android all the libs are in a single folder, so to make sure we don't have any name clashes,
we are prefixing the plugin name with it's relative path to qt folder (we replace / with _).
Fixes: QTBUG-78616
Change-Id: I7e0e67d65448532769d69f46b1856c029e2cf5cb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Not much different from i.MX6, apart from switching to aarch64 and the
appropriate tune flags.
[ChangeLog][Platform Specific Changes][Linux] Added a device spec for
64-bit i.MX8 systems (Vivante graphics stack)
Change-Id: I1fe939fca87d5f3031cefbf43fa359aeeaf44752
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Change-Id: I0b35c32f3730dc15d868b10489abeda909bbe926
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Leaving it empty resulted in errors from Xcode when compiling the app.
Task-number: QTBUG-25309
Task-number: QTBUG-74872
Change-Id: I61b0f47d754c5f5b181a6f918283d990458cc78d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][Platform Specific Changes][Linux] Added a device spec for
Raspberry Pi 4 (32-bit, V3D)
Change-Id: Idea889842a89dcc74705f1bb9559953dadc07251
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Commit 80dea664 broke .ui files with global includes that are not part
of the project, because we blindly added every file path that falls
out of 'uic -d' as dependency.
Introduce the extra compiler CONFIG flag dep_existing_only to bring
back the old behavior that ignores non-existent dependencies and set
it for uic.
Change-Id: I6eaa82817c932a98ebac6d08115a9815d4b9dd21
Fixes: QTBUG-78144
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
For nmake and VS projects we added the NDEBUG define for the release
configuration unconditionally within the qmake generators. To undefine
it, users had to use a nasty work-around.
Now, define NDEBUG within the MSVC mkspecs. In order to do that we
introduce the DEFINES_RELEASE and DEFINES_DEBUG variables that are
merged into DEFINES in default_pre.prf.
Users can unset NDEBUG by writing
DEFINES -= NDEBUG
in their .pro file.
Note that DEFINES_RELEASE and DEFINES_DEBUG are merged in
default_pre.prf in order to give extra compilers (like moc) the chance
to see the fully resolved DEFINES variable. This is different from the
QMAKE_CFLAGS_(DEBUG|RELEASE) variables that get merged in default_post.prf.
Fixes: QTBUG-78071
Change-Id: I381770a1d2f974fbae9b09a2254e3f2fc7842b68
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We must not set QMAKE_INCDIR_VULKAN if the Vulkan SDK is installed in
some default include directory. MinGW's std headers rely on
#include_next, which will break if we mess with the order of default
include paths.
Fixes: QTBUG-76660
Change-Id: I5ee0fc4c328ff88b979a8c1c010472b3883dff8d
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This reverts commit 521a85395d.
Having libraries resolved to absolute file paths by configure has
annoying consequences:
1. The Qt installer needs to unabsolutify paths in all kinds of files.
This is error-prone and fragile.
2. It hurts Qt's relocatabilty. The absolute paths are unlikely to be
right on different systems.
3. Qt's configure must imitate linker behavior correctly to do the
resolution right on every platform, which is hard to get right.
Consequently, the disadvantages of 521a8539 outweigh the advantages.
Task-number: QTBUG-72903
Change-Id: I3e159c46a1348963615b95614e56f026ecb2aefd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If an app wants use a debug framework of Qt, it is still expected that
the app should link against the release version, and just set
DYLD_IMAGE_SUFFIX=_debug when running the app.
This was not the case before, where the CMake Config files told CMake
to link explicitly against the debug libraries. This caused crashes
due to the Qt plugin loader mechanism still trying to find a release
platform plugin, which in turn would load release libraries, and thus
the application would end up loading both debug and release plugins.
Make sure the Config files in a framework case always reference the
release libraries (even though this might be counter intuitive).
Otherwise users of the Debug Config files would always get
crashes.
Fixes: QTBUG-78131
Change-Id: I88b1dc421477ad186012ca67b328a891128eb568
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Qt was configured with -libdir different from "lib", one could not
build with CMake whenever a static lib was pulled in (e.g. uitools).
Do not hard-code "/lib" but use the correct variable also for static
libraries.
Fixes: QTBUG-76255
Change-Id: I28c6861752e29e461247628d2b1f8a9ec32f0790
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Move aab, apk, apk_install_target to !build_pass, otherwise these targets
will be executed for each android abi.
Change-Id: I18f6c8946f503f2c08338f24758bf9059987fe0f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
-android-toolchain-version is not needed anymore as we are using exclusively the llvm toolchain.
Change-Id: Ia033297a6a2c968352c364758eb1436380a5f96e
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
qmlfiles are the same for all ABIs, and installing them for all leads to race condition
Change-Id: I69fe062f59f1d7c028dff5212e2f2fac7e71398d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This configure parameter is useful to compile Qt only for a selected ABIs.
The old parameter, -android-arch, does the same thing, it's kept for compatibility.
[ChangeLog][Android] -android-abis configure script parameter useful to compile Qt
only for a selected Android ABIs.
Change-Id: I1f418c7e0914dd83b98d763e8cd8c09841e20fdf
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Multi arch build in one go is need to support the new .aab packaging format.
By default the users apps are built for all Android ABIs: arm64-v8a armeabi-v7a x86_64 x86
The user can pass ANDROID_ABIS to qmake to filter the ABIs during development,
e.g. qmake ANDROID_ABIS="arm64-v8a armeabi-v7a" will build only for arm ABIs.
[ChangeLog][Android] Android multi arch build in one go,
needed to support the new .aab packaging format.
Change-Id: I3a64caf9621c2a195863976a62a57cdf47e6e3b5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
As was recently discovered, the debug_and_release CONFIG value is
always true on Windows, even if the feaure is disabled when specifying
-debug or -release when configuring Qt.
In order for the generated CMake Config files to be correct, we need
to use the true feature value.
Amends 44602224bf.
Change-Id: I42be684e8ad2a5ce72cb2e9d36f81de7589112c6
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
If Qt is configured with -release or -debug we must set CMAKE_DEBUG_TYPE
or CMAKE_RELEASE_TYPE, but not both.
This was broken by 82a2c7df which fixed the issue for iOS
simulator_and_device builds.
We have the following situation for both relevant CONFIG values:
debug_and_release build_all
iOS simulator_and_device unset set
Windows -release set unset
Windows -debug-and-release set set
Trivia: On Windows, when configuring with -release (or -debug) then
the *feature* debug_and_release is not set.
The *CONFIG* *value* however, is unconditionally set in
msvc-desktop.conf.
Fixes: QTBUG-77754
Change-Id: I326ecb024056bc189be5fa03ec6f59bc71226544
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Follow Google's BuildSystemMaintainers doc to simplify (a lot) the clang support
It is needed to support future NDK releases painlessly.
Also remove old workarounds.
[ChangeLog][Android] Android depends on NDK r20+
Change-Id: Ib4c07fc71e0f5a264d804b0b3baa18ff79d07630
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It is forbidden to set upper case named properties on CMake
interface libraries which do not start with the "INTERFACE_"
prefix. Rename QT_PLUGIN_TYPES to INTERFACE_QT_PLUGIN_TYPES.
There does not seem to be any usage of the property, so it's just for
informational purposes, so it's a one line change.
Fixes: QTBUG-77754
Change-Id: I3621f2b6188c3c72c4c2446f93ba1e078b755f72
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Using WASM_OBJECT_FILES does not allow memory growth, so we need to just
explicitly check for QMAKE_WASM_TOTAL_MEMORY
Change-Id: I447113972dfc3df4ee4073e8cc25481646d1507b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Since its introduction in commit
65bb1a25419210e6097cad973fb847aa3719c09b (old internal history, 2005)
with the commit message "optimizations I've been sitting on here"
we're dragging along this dead code. It is time for removal.
Change-Id: Ic7902ebb8c402734974ad6651a1371d1e5bf93c5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The paths to the libraries and prl files should have the "_debug"
suffix for the debug configuration. This prefix is added to the TARGET
when by qt_module.prf when doing a debug build, but not during a
debug_and_release build.
Make sure to strip the _debug suffix if it's there, and re-add it later
always, to be consistent in both debug_and_release builds and in
debug builds.
Amends a12b6e7bf6.
Task-number: QTBUG-38913
Task-number: QTBUG-75520
Task-number: QTBUG-77092
Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae
(cherry picked from qt/78d67d17a6c108a419816b8bd47f78864ddbb07f)
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
create_cmake.prf populates the values of CMAKE_RELEASE_TYPE and
CMAKE_DEBUG_TYPE depending on if Qt was configured with debug, or
release, or the build_all feature was set (which implies
debug_and_release).
simulator_and_device also implies build_all. This
is a problem when configuring a Qt simulator_and_device build with
only a "debug" configuration, or only a "release" configuration.
In that case we would try to parse prl files for both configurations,
even though only one configuration exists.
Switch to checking for debug_and_release scope explicitly instead of
build_all. This allows configuring and building a Qt iOS
device_and_simulator debug configuration which is usable from CMake.
Task-number: QTBUG-38913
Change-Id: Ife6d5d34d2b6bb1ac787d901a166e41c6e0c844b
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
/OPT:REF is enabled for release builds for MSVC by default,
however, clang-cl may not enable it without this flag,
add it to MSVC's mkspec so that all compilers based on MSVC
can benefit from it as well.
Change-Id: Ia80c20a8510cfa1e4687e39104ce99b37a2aa13f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This commit adds transitive dependencies to the plugins, so that a
sane set of default plugins get auto-imported when linking against a
module. It also provides a new function, qt5_import_plugins(), which
allows you to override the set of plugins that get imported. The decision
of whether or not to import a specific plugin is based on several custom
target properties and a very clever generator expression.
Note that this change only imports plugins on static Qt builds. It
does nothing on shared Qt builds, as the shared libraries already have
their own plugin import mechanism.
[ChangeLog][CMake] Added ability to auto-import non-qml plugins on
CMake builds
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: I2d6c8908b521cf6ba1ebbbc33a87cb7ddd9935cf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When doing plugin auto-importing as part of a Qt static build, it can
happen that the same module FooConfig.cmake file is loaded twice.
Make sure not to create the same target twice if it was already
created previously.
Task-number: QTBUG-38913
Change-Id: I734c83ff3c0bb9e3ee9bff37971209c57abaa2b9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
clang-cl will never support C++ standards newer than
C++14 without these flags.
I didn't add them to msvc-based-version.conf because
on Windows, only clang-cl use the same flags with MSVC,
both ICC and MinGW have their own flags. So they are
clang-cl specific flags.
Change-Id: Ia44a5ea4237c77ea5e897fffded32cbc008a4729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables building against the latest SDK, while still opting out
of features that this SDK normally enables, by lowering the SDK version
set in the BUILD_VERSION/VERSION_MIN_MACOSX load command.
Change-Id: Id5f13524740bfbf5eda10a5d0c2e3fda04bf3f52
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Now that all QLinkedList uses are removed from Qt, make sure
QT_NO_LINKED_LIST is set by default for Qt modules, so new
modules don't need to explicitly specify it in their
.qmake.conf.
Modules can still opt out of the QLinkedList ban by adding
DEFINES -= QT_NO_LINKED_LIST
to their .qmake.conf.
Change-Id: I34b7ab1c009795649bb7b4f1e7493556eafadd5a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After commit 9c7ebd191b, qmake would
complain about missing cmake tests even for internal modules that have
no application side C++ linkage that needs testing.
Change-Id: I23b23c81dbe6be2b6da5672cbd7b8f8454ec2f66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Windows, create a file containing include paths for QDoc in
cases where number of include paths exceed 30. Based on how moc
does this.
Task-number: QTBUG-68259
Change-Id: I0d03fab4b809174cb6b48c36ee9f8880ff294ff4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Beta version of Xcode 11 changes the format of the json object
returned by simctl and used to detect running simulators.
While multiple versions of Xcode can coexist on the same system,
they share the same simulator infrastructure so installing
Xcode 11 Beta affects projects using previous versions.
Change-Id: Icf06a794aa5ba3624163ace2ce827c0ecf97c38c
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
In a CMake regex, you need two backslashes to escape a character. The
.in file therefore needs four backslashes ...
This amends ba4fdd99ff
Fixes: QTBUG-76698
Change-Id: Ic757354ba596bf020c3ee5e90ee6d2d0fe3ba352
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Qt, qt_build_config.prf adds all directory variables but
DESTDIR to QMAKE_DIR_REPLACE_SANE. We must not add the content of
QMAKE_DIR_REPLACE_SANE unconditionally to QMAKE_DIR_REPLACE in order
to avoid duplicate entries.
Duplicate entries result in an interesting build folder structure like
.obj
├───debug
│ └───debug
└───release
└───release
This commit amends 274882a5.
Change-Id: Ifa8178410d82f58635babc46d43774bab522fbf8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This reverts commit 17512d497d.
Reason for revert: force vmx instructions to Coin level B virtual
Relates to qt/qt5 84ff024609e4eca003c604294b4102e73deba8c3
Change-Id: Id87a5629a5cd6ebc18c676eae390466e280fc600
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This change will create Config.cmake files for internal modules like
AccessibilitySupport when doing static builds. They need to be
find_package()'ed and linked in when linking in certain qt plugins.
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: Ia2e446025c87df48f20bb65cfd9da6c6a4354bb1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When adding the static dependencies for a module, they should be
added to the debug|release configuration as appropriate, otherwise
it ends up adding the debug version of the libraries to the release
configuration as well as the release version of the libraries.
Implementation wise, that means we have to use generator expressions
of the form $<$<CONFIG:Configuration>:${dependencies}>, because
INTERFACE_LINK_LIBRARIES does not have a
INTERFACE_LINK_LIBRARIES_<CONFIG> equivalent that can be set per
configuration.
Note that the condition part of the generator expression can not
explicitly check for Debug or for Release, because a user can
configure their application without specifying CMAKE_BUILD_TYPE,
which means that both Debug and Relase conditions would fail.
So the actual condition has to be isDebug or isNotDebug.
The same approach is used for INTERFACE_LINK_OPTIONS.
For debug_and_release builds we use the isDebug and isNotDebug
conditions for the generator expressions.
For singular builds (only release or only debug), we set the
generator expression condition to "1" aka always true.
This means that the Qt libraries and link options will always be used
regardless of the configuration with which the CMake application
is configured with.
Fixes: QTBUG-76337
Task-number: QTBUG-38913
Change-Id: I5369d8ba083359a4a92253dbd1dabe9d1efa34db
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The absolute paths of certain static dependencies can have spaces in
them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle
this, and simply replaces all spaces with semicolons, which obviously
breaks the list of dependencies, and a consuming application fails to
link with a message like:
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
This change partially restores the functionality that was added in
102e1822ff specifically the part
that changes qmake to export an additional variable
QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as
QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that
CMake can correctly parse the separate lib entries.
This is much cleaner than trying to parse the original QMAKE_PRL_LIBS
variable with a complicated regular expression.
Amends eda28621f6.
Task-number: QTBUG-38913
Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The paths to the libraries and prl files should have the "_debug"
suffix for the debug configuration. This prefix is added to the TARGET
when by qt_module.prf when doing a debug build, but not during a
debug_and_release build.
Make sure to strip the _debug suffix if it's there, and re-add it later
always, to be consistent in both debug_and_release builds and in
debug builds.
Amends a12b6e7bf6.
Task-number: QTBUG-38913
Task-number: QTBUG-75520
Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The header clean command must not be prefixed by "@echo ...", because it
now starts with "$(CXX)" which already is prefixed.
This amends commit 6fa5dfdd.
Change-Id: I5c2e0d2c2ed91c7232fce0a4a49db0fccfdc005d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By running dumpcpp if the files do not exist at qmake time we enable
the dependency finder to find these files and set up the dependencies
as appropriate. Since other changes ensure that dumpcpp will be called
at the right time when building if the typelib changes, we no longer
need to have the generated files dependent on the objects. As a
result, we are able to prevent it from unnecessarily rebuilding
everything if certain files are updated.
Change-Id: I334f48c7a980aa8b893c14cb2a4687d3b2b7a4b9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Like in Qt code itself we should use forward slashes consistently.
This enables the vulkan test to run on Linux for MinGW
cross-compilation.
Task-number: QTBUG-76660
Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
By default RTEMS does not support linux extensions for errno.
Enable it for build.
Change-Id: I43b346794b99ac0ed339bfbe6e39684071615503
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
This change is used to generalize a template docker-compose file for all
modules. Ideally, the leaf module only need to keep a docker compose
file for all platforms (docker-compose.yml).
NOTE:
The version of docker-compose file downgrades from 3.4 to 2.1 because
the 'extends' keyword is not supported in Compose version 3.x.
Change-Id: I2e36fd9236eda86cb5fcf940d787ccefe9200696
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The make executable that comes with Android's NDK tries to execute the
shell-builtin "move" as a stand-alone executable unless you trick it
to execute "move" through the shell by surrounding one argument with
double quotes or such.
Force the execution of "move" through shell by altering QMAKE_MOVE for
Android on Windows.
Change-Id: I5b1490ad0606960dbd06a4cafb0b0b983e265159
Fixes: QTBUG-35713
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The directory must be prepended by = to denote the sysroot.
This amends commit 797f686e.
Change-Id: Ib85c0abc58fce3504ecccef0e223b2618ac9149a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We must use the same two-level replacements like for .prl files.
This amends commit d5071a40.
Change-Id: Iea065d01dee61cf2d1ff78640d045c3c76db9ac8
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Static libraries may get installed and used by other builds, which may
be done with a different version or build of the compiler. So this
commit introduces two new flags:
- no-static-ltcg: disables LTCG completely for static libraries
- fat-static-lto: forces static libraries to produce fat LTO objects
fat-static-lto is useful for Linux distributions, since installed static
libraries should not carry LTO information, but that information is
useful during Qt's own build. This feature should be used alongside some
compiler-specific method of removing the LTO information from the
static libraries prior to installation, so only the regular part
remains.
For current GCC versions, this command suffices:
strip -R '.gnu.lto*' -R '.gnu.debuglto*' libname.a
Otherwise, distributions can use "no-static-ltcg" to disable it
completely.
Change-Id: I495bc19409f348069f5bfffd155237ade9f4b42f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Normal sources are built using $(CXX), which is defined in the makefile,
but can be overridden. We should do the same lazy evaluation of the
compiler for headers.
Change-Id: Ic548786bd18ed8fb7eb0b58a527615ab19000323
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Starting with Android 8.1.0 wrap.sh can be used to enable ASAN on Android.
Change-Id: I6ef6e5989475b9b7981d05e78a03f9680c1acb1b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If the QMAKE_CXXFLAGS already had -ffat-lto-objects, the *= wouldn't add
it it again, after our "-flto -fno-fat-lto-objects", which meant the
last one would stand.
Change-Id: Ic9cfa6256b5045caa6e6fffd15a7f6cda7aaa837
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Done to fix broken CMake WebAssembly support, where CMAKE_CXX_STANDARD_LIBRARIES
appear to be empty. The regression was introduced by
ba4fdd99ff.
This fixes the following CMake error on find_package(Qt ...):
string sub-command REGEX, mode REPLACE needs at least 6 arguments total to command.
Fixes: QTBUG-73475
Fixes: QTBUG-76244
Change-Id: Ieebe8cd1d49bb302dc37d8f118cc0b9376d6cdd7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The regular expression with the alternative is not portable.
Use a separate QMAKE_PRL_INSTALL_REPLACE item.
This amends commit f00de33.
Fixes: QTBUG-75950
Change-Id: I78e172053f8b05be7d595a1c9e1695ea658b0547
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
In the case of building a Qt module repository against an installed
qtbase the .prl files contain absolute paths to Qt dependencies e.g.
'/install-prefix/lib/libQt5Core.so'.
Those must be replaced with $$[QT_INSTALL_PREFIX]. The .prl
replacement code however only takes $$MODULE_BASE_OUTDIR/lib into
account.
Fixes: QTBUG-75804
Change-Id: I5ea5623ca7396b672fded3f1b9434b9ad5ed12ec
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
If qmake is called without sh.exe in PATH, the relative paths
in OBJECTS will contain backslashes as separator.
Anyhow, emar needs forward slashes. Use GNU make's subst command
to fix this.
This amends 22c1e10e19.
Task-number: QTBUG-75257
Change-Id: Iacc6fe69cf470f35c6ddd829be7a80944346452d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
x86_64 libs are located in ANDROID_PLATFORM_ROOT_PATH/usr/lib64
not in ANDROID_PLATFORM_ROOT_PATH/usr/lib .
Fixes: QTBUG-47672
Change-Id: Ia1f74f7c2a30b276b95fd0e7dcf8370d739e3c41
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
(cherry picked from commit 43763e2796)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Mips archs were removed from Android NDK long time ago.
Change-Id: Icf64a1e2cfbe3fe7307c7898b14fd199d9eeaad3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Do not store this variable locally, because
a) it might change if the SDK location changes
b) does not play well with Qt installer packages which would provide the
include path of the build machine.
To achieve this we introduce the (usual) magic value - for
QMAKE_EXPORT_INCDIR_VULKAN to denote "do not export this value".
Fixes: QTBUG-73796
Change-Id: Ied26ee12cbcdf7f5f6e1caef5d29dadf6309c5d6
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QMAKE_PRL_LIBS contains absolute paths to libraries, e.g. libqtpcre2.a.
On "make install" the libdir is replaced with the installation target
libdir. If the libdir is in QMAKE_DEFAULT_LIBDIRS (e.g. /usr) then the
replacement was empty. That worked fine for include paths but not for
paths referencing files in that libdir:
/my/build/lib/qtbase/lib/libqtpcre2.a would become /libqtpcre2.a.
Add another replacement that takes care of file paths and inserts
$$[QT_INSTALL_LIBS].
Fixes: QTBUG-75460
Change-Id: I4e84478a50c24d4143ad5695493cad2992735cf2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
On Windows we hit the command line length limit when building the wasm
port of Qt. We must not pass the list of object files directly to emar,
but write a response file which is then passed via the @ parameter.
Fixes: QTBUG-75257
Change-Id: Id518fd81325716b8efaba29f495568a9a3e34be4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Implicit copy constructors or methods are considered deprecated for
classes that has one of the two or a destructor.
The warning is enabled with -Wextra in gcc 9
Change-Id: Ic9be654f2a142fb186a4d5a7d6b4f7d6f4e611d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not call find_library() on libs that are part of CMAKE_CXX_STANDARD_LIBRARIES:
At CMake call time they might not be found.
Fixes: QTBUG-73475
Change-Id: I350b3280744883e82d83c46e70f6a7cfc8aeed2e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The sysrootification of QMAKE_INCDIR_OPENGL on macOS must happen only
once. Commit 49ef3773 addressed this but stored the sysrootified
QMAKE_INCDIR_OPENGL in qt_lib_gui_private.pri. For installer packages,
these paths are the paths of the build machine and most likely wrong
on the user's machine.
This reverts commit 4949ef377349ba4dae840c2d5caa36e2d516707baa and
restores the sysrootification in sdk.prf. The original include paths
are assigned to QMAKE_EXPORT_INCDIR_OPENGL and stored as
QMAKE_INCDIR_OPENGL in qt_lib_gui_private.pri.
Fixes: QTBUG-75374
Task-number: QTBUG-73736
Change-Id: I4c0f65866d60660c632363dba3adc7ea2e344bfc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building in a unix style build system (i.e. msys), QMAKE_DIRLIST_SEP
is a colon, not a semicolon. Thus, always split the incoming string
(after the fixup regex) using semicolons on windows.
This matches the code for gcc, further up, which does:
equals(QMAKE_HOST.os, Windows): \
paths = $$split(line, ;)
else: \
paths = $$split(line, $$QMAKE_DIRLIST_SEP)
Change-Id: I6a0175f9d14ae9ca188553483b7868f0549c784a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For gcc's -I and -L arguments a = prefix is replaced by the sysroot.
Since we're resolving include paths and library paths, we have to
support this feature.
For example, the linux-rasp-pi3-g++ makes use of this and is broken
without this patch.
Change-Id: Ie39e63322bd35e2a93aa8e55d52260164b8c6a6b
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Injected headers were made relative to MODULE_BASE_OUTDIR by syncqt
and made absolute by resolving against REAL_MODULE_BASE_OUTDIR.
This breaks for modules that reside outside the original Qt source
tree (if the directory depth doesn't coincidentally match).
Now, we resolve injected headers against build_basedir, which is
REAL_MODULE_BASE_OUTDIR. To emphasize the equivalence of
REAL_MODULE_BASE_OUTDIR and syncqt's build_basedir, use the former for
syncqt's -output argument.
This commit amends 2aa779e8.
Fixes: QTBUG-70587
Change-Id: I2935d87d7ee681fa4aa795a270b94ab7a43abe59
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Makes it possible to build user projects and Qt with C++2a. It is not
automatically upgraded to yet though.
Change-Id: I949ce94871ddc53f21b7265a52b9c0e1370456c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this avoids the scenario where the linker would pick up the wrong qt
libraries for LIBS_PRIVATE because LIBS added the "wrong" path first.
this is also consistent with configure-supplied dependencies as of
recently.
as a side effect, this also removes pretenses of lsb linker handling, as
it makes no sense after the change and is certainly obsolete anyway.
Fixes: QTBUG-50921
Change-Id: I84398c9143f393c2eefb3c69a31bd9f633669924
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is a follow-up to f5850cb0da, which
did not take into account some special-casing for macOS framework build,
thus causing CMake to look for QtFoo.framework instead of Foo.framework.
Change-Id: I261b14e75fde66fb57486bde43fc936f796a6f96
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
The checks whether we have a Qt prefix build were broken for
top-level builds. Non-prefix top-level builds were incorrectly
detected as prefix builds.
For top-level non-prefix builds QT_HOST_DATA/QT_INSTALL_PREFIX becomes
something like "~/my/build/dir/qtbase" but .qmake.cache (and
.qmake.super) is/are created in "~/my/build/dir".
This patch extends the prefix_build check by probing for the existence
of .qmake.super, which only exists for top-level builds. Also, we add
qt_prefix_build_check.prf as central place for determining whether we
have a prefix build to make sure that qt_configure.prf and
qt_build_config.prf use the same logic.
Fixes: QTBUG-76185
Change-Id: I2b76fe26013496aaf2dac96ea711b06a69550a29
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Those modules are TEMPLATE=aux, so they weren't triggering the file creation
here.
To make this work properly we have to:
- check for TEMPLATE aux in the right places
- add a dummy target to INSTALLS to actually trigger the creation
- initialize PRL_TARGET for aux templates
Fixes: QTBUG-75901
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Idce141629dd34287808bfffd159f92ac28c6c8b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CMake configure_file command is commonly used copy & modify template files
during the build process. One limitation, thought, is that configure_file
expect the variables to be replaced to be encoded using either a @APPNAME@ or
${APPNAME} convention.
This commit therefore changes "APPNAME" to "@APPNAME@" in wasm_shell.html to
make the HTML template file compatible with CMake configure_file.
With this commit, it becomes possible to write the following CMake function
that mimics what QMake is already doing:
function(copy_html_js_launch_files target)
set(APPNAME ${target})
configure_file("${_qt5Core_install_prefix}/plugins/platforms/wasm_shell.html"
"${target}.html")
configure_file("${_qt5Core_install_prefix}/plugins/platforms/qtloader.js"
qtloader.js COPYONLY)
endfunction()
Change-Id: Ic38abdc498ba03b8d21f1b9b70aa1d480ae7f362
Reference: https://cmake.org/cmake/help/latest/command/configure_file.html
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Since change c808a6978b plugins.qmltypes and designer/* didn't
get copied anymore for a non-prefixed build. Fix this, and clean up surrounding
code.
Fixes: QTBUG-75682
Change-Id: Ic6de94a5b01dae08929a67cbaedde60d120a4807
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][qmake] The CONFIG value c++latest was added to select the
latest C++ standard the currently used toolchain supports.
Task-number: QTBUG-75653
Change-Id: I22ddc9d293109d99e652b7ccb19d7226fca4716d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
CMAKE_QT_STEM already contains the _debug suffix.
Do not add it again.
This amends commit bb8a3dfc.
Fixes: QTBUG-75520
Change-Id: I6c311f0913ea83fcf299a21a0ee1f28c3861371f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
x86_64 libs are located in ANDROID_PLATFORM_ROOT_PATH/usr/lib64
not in ANDROID_PLATFORM_ROOT_PATH/usr/lib .
Fixes: QTBUG-47672
Change-Id: Ia1f74f7c2a30b276b95fd0e7dcf8370d739e3c41
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Clang-cl couldn't find the header given to it by -FI when it isn't in
any of the included directories.
Additionally clang-cl 8 has a bug with exported templated classes with
inline methods that causes it to have missing symbols at link time. We
work around this.
Fixes: QTBUG-74563
Change-Id: I7becf05fa8edb07bd4cefe12bee3737e5e1dfa14
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When cross compiling on Ubuntu with LTO enabled, the linker will complain about the "-fno-fat-objects" parameter even if the "-fuse-linker-plugin" is passed it.
But if the "-fno-fat-objects" parameter is removed, the linker will complain about "don't support linker plugin in this mode".
Remove both parameters can fix this.
Change-Id: I2d792ca70737f2e82a360bfc597f2b110513b954
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid using inline assembler
Task-number: QTBUG-72716
Change-Id: I696efb5a787416eb4fc5ba3a250461aaa9a4afc2
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
The regular expression with the alternative is not portable.
Use a separate QMAKE_PRL_INSTALL_REPLACE item.
This amends commit f00de33.
(cherry picked from commit 015d7f16cb)
Fixes: QTBUG-75950
Change-Id: I78e172053f8b05be7d595a1c9e1695ea658b0547
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
In the case of building a Qt module repository against an installed
qtbase the .prl files contain absolute paths to Qt dependencies e.g.
'/install-prefix/lib/libQt5Core.so'.
Those must be replaced with $$[QT_INSTALL_PREFIX]. The .prl
replacement code however only takes $$MODULE_BASE_OUTDIR/lib into
account.
(cherry picked from commit f00de3322e)
Fixes: QTBUG-75804
Change-Id: Ibf0f90a860d5089f416f903c1d18483d3dcc2ee6
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do remove quotes around libraries before trying to parse them.
This patch is a follow-up to eda28621f6, and fixes
an issue on Windows where e.g. Qt5AxServer.prl contains entries
like
"-lole32"
Fixes: QTBUG-73475
Change-Id: I3d1353de618328a0d44bacd4dbd6aba8fc66b1b7
Reviewed-by: Kyle Edwards <kyle.edwards@kitware.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This will enable modules like QtWebView which needs to generate its
qmldir at qmake time since it changes depending on whether QtWebEngine
is available or not. This ensures that it is not created in the sources
directory and in the build directory and correctly picked up.
Task-number: QTBUG-65092
Change-Id: Iac628b97145d29778f554510e8e07102d588df64
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
INTEGRITY compiler searches for exact filename if the -l argument already
contains .a suffix. GNU linker uses exact filename if -l argument begins
with a colon.
Change-Id: I62be8f1e6b9c7dc7eaa5ab3d4bfc55460d729737
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Compilation breaks on Windows and macOS hosts with USE_ZLIB=1.
In addition, it turns out that the versions of the libraries in
Emscripten Ports are outdated. Since we have newer versions
of these libraries in Qt already, we will just use those.
This is a revert of 70b558ad5b.
Task-number: QTQAINFRA-2835
Change-Id: Ic2642b7d319a3447fd08843657eb0535255e0449
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
As - cannot be used in a function name but can still be used as part of
the TARGET, then we need to make sure that it is replaced to avoid a
compile problem.
Change-Id: I0b2e465310206e2522ce59235b1592517817d3e2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
androidtestrunner now checks is the apk is build and if it is, it will skip the build phase.
Now we can build the apks in parallel (which takes most of the time) and run them sequentially.
This way running tests on Android is much faster.
Change-Id: I82f34723ac08f7728cc0daab3366e03821335eed
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Now creating an .apk it's easier than ever.
"$ make apk" is all you need to run to create an apk for your application.
[ChangeLog][Android] Introduce "make apk" target, an easy way to create an apk.
Change-Id: I12565e7ed32beb42da40d8ce42a52339038be950
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
androidtestrunner is a tool needed to run qt tests on Android.
Now you can run tests as simple as you run them on Linux, macOS,
Windows.
"$ make check" it's all you need to run tests on the default android
device.
ANDROID_DEVICE_SERIAL env variable can be used to use a specific android
serial.
Use cases:
$ make -j1 check
-j1 is needed to make sure we don't run multiple tests in parallel.
$ ANDROID_DEVICE_SERIAL="emulator-5554" make check
Run the test on "emulator-5554"
$ make TESTARGS="-- -xml" check
Switch to xml output. All params after -- are passed to test
application.
$ make TESTARGS="-- -o out.xml,xml -o out.txt,txt -o -,tap -vs" check
Create two files out.xml and out.txt in the current folder and print
"tap" format to stdout and enable logging of every signal emission.
[ChangeLog][Android] Make it easy to run Qt tests on Android.
"$ make check" is all it's needed to run a test on an Android device.
Change-Id: I1a7f64b62608f7367b5a6aabf5d6c6e7e50242e6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
[ChangeLog][qmake] Introduced the variables LEX_DIR and YACC_DIR which
determine the location of lex/yacc output. Fixed parallel execution of
lex/yacc for debug_and_release builds.
Fixes: QTBUG-65730
Change-Id: I68c8260a95609e11bb5205a91aff2c098ed7009c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Elements that appear in QMAKE_DIR_REPLACE_SANE must appear in
QMAKE_DIR_REPLACE to be considered due to the algorithm used in
exclusive_builds_post.prf.
Change-Id: Ibce7e6c988b3e8a141075890a2f547eb34090b3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Also remove it from versions no longer supported.
Change-Id: I03a911a349527a81846e1820f95d775fe3943450
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This mode significantly improves build (link) time.
Opt-in by passing “-device-option WASM_OBJECT_FILES=1”
to configure.
This requires a custom emsdk build which uses upstream
llvm.
Task-number: QTBUG-72537
Change-Id: I47bab2b58ae7e49ca104233ec14fff7b93516d36
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When such modules aren't following the libQt5Foo.so naming convention,
the generated CMake files would be incorrect.
Change-Id: I57908f7466bff7a05f19271ccd495849476bdf38
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Calling a qmake replace function without assignment is undefined
behavior.
This amends 11ae0e77.
Change-Id: Ie716f295275d1ba79a217745b332a8eca04b355d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The sysrootification of OpenGL include paths must be done only once: at
configure time. The resolved paths are stored since 521a8539 and must not be
resolved again.
Turn the makeSpec-type opengl library into a custom-type one, and do
the sysrootification in the handler function.
Fixes: QTBUG-73736
Change-Id: I2933144057d6f01d8bfc7bda2c2df56c57303459
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For creating the qmlplugindump rule we need the name of the import. So
far we're trying to derive this from the directory name, but that
becomes complicated if versions are included, like
QtQuick/Controls.2/Fusion
Instead of trying to tweak the regexp even more to capture this, we
now allow a plugin to set it's name explicitly via IMPORT_NAME.
Change-Id: Ie75dae7d41398b3ac19ccb6910002b6fad009891
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The files to be put into an auto-generated qrc file must not simply
disappear, because IDE users still need to have them in the project tree.
So we add them to OTHER_FILES now.
Task-number: QTCREATORBUG-20103
Task-number: QTCREATORBUG-20104
Change-Id: I8a9136491f975def7c33385e375c407815ad269a
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QINSTALLS is not set when Visual Studio projects are used. Use its
resolved value in case that Visual Studio projects are generated.
Change-Id: I8c21d4335971f45e56b3549086cb803c2d464158
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is a revert of eea08d376a.
We need these flags to be added to the compiler in order to find the
emscripten ports to be able to use them.
Task-number: QTBUG-73127
Change-Id: Icf70f456947aef04dc79b2328f2e95fb1e94fcf8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This reverts commit 37970d7b3e.
That commit broke the build on macOS, because the OpenGL headers aren't
resolved anymore at configure time.
Change-Id: Iec6ef009c9ea7e28b12eeca6b5eb06918bf49d98
Fixes: QTBUG-73827
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Without this include, __REDIRECT does not get defined, and then
open gets #defined to open64, leading to bogus MOC output.
See https://bugs.debian.org/920613.
Change-Id: I629d9dc6af05b9480c0c81a61d8890ab8bbefaae
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The bcm_host library couldn't be detected anymore. Let the makespec
provide LIBDIR, INCDIR and LIBS for bcm_host to fix this.
Change-Id: I4bc268504dc48edaf2884f1c14b745260fd9112c
Fixes: QTBUG-73727
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Change-Id: I963fc1c159edc644f081675c3dee248c25d7c9dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
This patch is a follow-up to eda28621f6.
It adds a translation of the $$[QT_INSTALL_LIBS] variable into
a path that CMake understands.
Without this, CMake finds the system libraries if there are any
instead.
It also handles the case where the .prl file contains absolute paths to
libraries, as it happens for instance on Debian systems.
Task-number: QTBUG-38913
Change-Id: If68373efee22bc00172e8fead3e2c12ea440787f
Reviewed-by: Kyle Edwards <kyle.edwards@kitware.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Since include paths are fully resolved, we must remove the code that prepends
the SDK path to the OpenGL include paths.
Change-Id: I80d74629c7fc989a89c3f1d95d6de43b4c1de17a
Fixes: QTBUG-73736
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
configure.json: Make the “thread” feature be allowed
for wasm but disabled by default.
Change qmake.conf and wasm.prf to enable Emscripten
pthreads mode:
- Add USE_PTHREADS=1 linker flag
- Add PTHREAD_POOL_SIZE linker flag with a default pool size (4).
- Add TOTAL_MEMORY linker flag to set available memory (1GB)
It is possible to override options such as PTHREAD_POOL_SIZE
from the application .pro file using QMAKE_WASM_PTHREAD_POOL_SIZE
To change TOTAL_MEMORY, use QMAKE_WASM_TOTAL_MEMORY
Make qtloader.js work in pthreads mode:
- The Module.instantiateWasm callback must provide the module
in addition to the instance to Emscripten.
- Set Module.mainScriptUrlOrBlob so that the pthreads web workers
can access the main script
Task-number: QTBUG-64625
Change-Id: I1ab5a559ec97c27c5fc24500ba5f863bcd275141
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
The source map location can be configured by setting
QMAKE_WASM_SOURCE_MAP_BASE in the .pro file. Fall back
to “http://localhost:8000” if not set.
Task-number: QTBUG-72002
Change-Id: I9da80dacdefc272f267e5db4caac274d93ba4479
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Update our cflags and lflags with the ones found in android.toolchain.cmake
Fixes: QTBUG-73274
Change-Id: Id9fd9bf04df959239abd3100090a1485e872b2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
https://gcc.gnu.org/ml/gcc-patches/2018-10/msg01240.html
This is currently only used for webengine, where link time really matters.
New configure options:
* force 'lld' '-linker lld' or' --linker=lld'
* force 'gold' '-linker gold' or '--linker=gold'
* force 'bfd' '-linker bfd' or '--linker=bfd'
Note before by default gold was always forced (if supported) now default linker
is system default one.
[ChangeLog][Tools][configure & build system] Added --linker=[bfg,lld,gold] configure flag.
Change-Id: Idaa13510da70243c6176b96db846d629cd65c7af
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Header files of modules that specify generated_privates are usually
not yet available at qmake-time. Thus, the installation rule must not
check for the file's existence.
Change-Id: Ifc7ff95422912d255744c9006382ff181176ae77
Fixes: QTBUG-71340
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This makes it much easier to have the version information set for an
Android APK without having to manually modify the AndroidManifest.xml
each time.
[ChangeLog][Android][qmake] Can now set the version name and code for
Android using ANDROID_VERSION_NAME and ANDROID_VERSION_CODE respectively
in the pro file.
Change-Id: Ie6813bc3a7444f7baa5e772b93bc2695d9b81e57
Done-with: Markus Maier <markus.maier@rosenberger.de>
Reviewed-by: Markus Maier <markus.maier@rosenberger.de>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Also catches some more variants of SDK mismatch, such as Xcode not
being installed at all, or the SDK missing.
Change-Id: I184aaa571ef0ea722ca64c54f665462dabc17533
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If configure is called with -continue, it should not stop processing
command line arguments after encountering an invalid one.
Example:
configure ... -continue -quack -no-feature-gui
would ignore everything after -quack.
Change-Id: Ia5f0cb13414c9c0c7246ff0c72f8e935fe6dca3c
Fixes: QTBUG-72912
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...and yield a warning that -skip has no effect in a qtbase build.
This is consistent with configure's help output and enables us to
always pass "-skip qtwhatnot", whether we're calling top-level or
qtbase configure.
Change-Id: Ie5b0791a6000d1d78b1367658ad86a92b2ec6a6a
Fixes: QTBUG-71253
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Integrity assembler doesn't understand NEON assembly statements.
Compiler enables _ARM_NEON_ and _ARM_NEON to indicate that NEON
intrinsics are available. _ARM_NEON_ and _ARM_NEON needs to be
disabled to skip handwritten assembly code paths in Qt.Auto-
vectorization is enabled without the flags enabled.
Task-number: QTBUG-72716
Change-Id: I84cfbf98bd2af47740a79f4b300c1801017ee22c
Reviewed-by: Tuukka Turunen <tuukka.turunen@qt.io>
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
After 521a85395d configure doesn't find
OpenGL libraries from QMAKE_LIBDIR, hence we use QMAKE_LIBDIR_OPENGL_ES2
and QMAKE_LIBDIR_EGL instead.
Task-number: QTBUG-73136
Change-Id: Iaeac46000c5d684f601741cbef91ce745ceb4ea2
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
With the current distribution, this is 90% of active devices, and
it was released in 2014. Qt 5.12 is LTS and will continue to support
older Android versions for a long time to come.
This is to reduce the testing needed on outdated platforms and
allow ourselves to use some newer APIs unconditionally in Qt.
Android 21 was chosen because it is the minimum version that supports
64 bit builds.
[ChangeLog][Android] Increased the minimum supported Android version
to Android 5.0 (API level 21).
Fixes: QTBUG-70508
Change-Id: Ia7b4345e42ca05a25a292f11ccbb8cbd692cf8f0
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This has been removed in emscripten compler version 1.38.23 and will
cause building apps to fail.
Change-Id: I7e58053ce06053f6f1d577377b503cabb035bb58
Fixes: QTBUG-73143
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
That target is added unconditionally at the end of windeployqt.prf.
Fixes: QTBUG-73018
Change-Id: I8d29691c30df64bf5383daa10e169985d47592f2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The @executable_path relative framework directory is one step below
the executable, as in:
Foo.app/Contents/Frameworks
not:
Foo.app/Contents/MacOS/Frameworks
The former is what Xcode defaults to for new projects.
Change-Id: Id08f3f1d80f1c84d76fb71676c5df4a3a6b3da36
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt couldn't be configured with -system-zlib on macOS, because qmake
failed to find "/usr/lib/libz.dylib".
The library path is something along the lines of
"/Applications/Xcode.app/.../MacOSX10.14.sdk/usr/lib" which doesn't
contain "libz.dylib". But it contains "libz.tbd", which is a YAML-file
pointing to "/usr/lib/libz.dylib". One can pass the absolute path to
this tbd file to the linker, which will then pick up
"/usr/lib/libz.dylib".
Introduce a new variable QMAKE_EXTENSIONS_AUX_SHLIB, which is a list
of auxiliary extensions for shared libs, and add the "tbd" extension
to it on macOS.
Change-Id: I083b79a69d00232e35f9d6164ffa86cb473f1742
Fixes: QTBUG-72745
Fixes: QTBUG-72964
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Linking with a framework suffix to pick up the debug version of
libraries doesn't work as long as the dependencies picked up from prl
files are not rewritten to also include the suffix. The result is that
we end up loading both release and debug versions of the Qt libraries.
Use the target environment (target_wrapper.sh) to set the image suffix
instead, which means 'make check' will automatically work.
Change-Id: I60b0840760f68e579c270245d394e1dd609a0ebb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Mimicking the approach from testlib_defines.prf, DEFINES containing a path
surrounded by quotation marks have to be handled differently for Visual
Studio projects.
Change-Id: I26f6a45d4df154f599e8be15b3aa3905cf703a1f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while it's legacy and should not be used (use QMAKE_USE+=egl instead),
it shouldn't be broken nonetheless.
amends 310bf3f57c.
Fixes: QTBUG-72564
Change-Id: Id6a070a4653dc1182a6b4d75af027a6ee6cbacae
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
