This partially reverts 5764f5e6ea and
fixes the problem differently.
After this commit, "file:///foo" is still equal to "file:/foo", but
"foo:///foo" becomes different from "foo:/foo", as it should be.
Task-number: QTBUG-36151
Change-Id: Ia38638b0f30a7dcf110aa89aa427254c007fc107
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes the issue that the blitter required sometimes the
texture wrapping to be repeat
Change-Id: I86150d008422facf9040873b0983b0e44be9ad24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Origin for Target rect was deemed a confusing concept. The current
implementation would translate the target rect to the coordinate system
specified. However, the order and "direction" of the vertices would
always be the same. So drawing a texture in for one target rect defined in
one coordinate system would paint the texture the same way as it would
when a texture was drawn for a target rect drawn in the "opposite"
coordinate system. The point with this was that if you wanted to "flip"
the texture you would specify that with the source coordinate system.
However, this approach breaks on different levels, such as QRect has functions
which expects a top left coordinate system (ie. top() and bottom()).
In the end Qt uses a top left coordinate system, hence QWindow specifies
a top left coordinate system, and hence the api becomes easier if it is
not possible to define the coordinate system of the target viewport.
Change-Id: I7dd59b3718380876e87a4bff88381d7a1c7d58c1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This also has the advantage of not requiring the use of the locale
codec. Quite an advantage if you're debugging the locale codec. But it's
mostly so that we don't get question marks that hide the difference we
were trying to locate.
[ChangeLog][QtTest] QtTest now prints an escaped version of QStrings
that failed to compare with QCOMPARE. That is, instead of converting
non-printable characters to question marks, QtTest will print the
Unicode representation of the character in question.
Change-Id: I44c1ef3246b188c913dacd3ca4df02581356ea41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change 85e57653 caused a compile error for code that does
Q_DECLARE_LOGGING_CATEGORY(cat);
//..
qCDebug(cat()) << // ...
error: C3848: expression having type 'const QLoggingCategory' would lose
some const-volatile qualifiers in order to call 'QLoggingCategory
&QLoggingCategory::operator ()(void)'
This is a regression from Qt 5.2. Fix the error by adding a const version
of operator()().
Change-Id: I2fb04f2e155962adee0f98089fc5a159000bef56
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
moc would skip the 'operator' keyword as unknown and try to parse a type again
but as it sees the '<' it looks for the corresponding '>' which does not exist
types can't start with '<' anyway, so return an invalid type and continue
parsing as usual
Task-number: QTBUG-36834
Change-Id: If3d27076ef9947abf8c57c594713eece9334d0b0
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Conversion from UTC to local time will result in same datetime value,
if local time is in UTC.
Change-Id: Icd4ea57cb46cc97bcc8fce4f4e579bf64a4d4b10
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
At first, my goal was just to fix Moc::until() to parse properly
template arguments containing expressions containing > or >>
such as Foo<(8>>2)>
But with the test, I realized that normalizeType also requires change
not to split the > > too much.
And QMetaObjectPrivate::decodeMethodSignature should not interpret
the ) within the template parameter as the end of the function.
Change-Id: Ia9d3a2a786368aeda1edcf66280d70f64cf05070
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It was not possible to get the actual process ID (in a cross-platform
manner) from QProcess, as the user would need to handle the returned
typedef (Q_PID) differently on Unix and Windows.
On Unix Q_PID is the actual process ID, but on Windows it's a pointer
to a PROCESS_INFORMATION structure, which among other fields contains
the process ID. Instead of returning a pointer on Windows,
QProcess::processId() will return the actual process ID on both Windows
and Unix.
[ChangeLog][QtCore][QProcess] Added processId() to QProcess. This
function will, unlike pid(), return the actual process identifier on
both Window and Unix.
Task-number: QTBUG-26136
Change-Id: I853ab721297e2dd9cda006666144179a9e25b73d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is only useful for logging benchmarks, since it won't print test
passes, failures, etc. It's useful for importing to spreadsheets to do
number-crunching.
[ChangeLog][QtTest]Added a CSV logging mode that is suitable for
importing benchmark results into spreadsheets. This can be enabled by
the -csv option on the command-line. The CSV logging mode will not print
test failures, debug messages, warnings, etc.
Change-Id: I245d6f86bb380645c9bc0d748cf474b3ed42cab8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Integrate with QOpenGLTextureBlitter, QOpenGLWidget and friends.
Change-Id: Ic2867b713a21a3d2820d546174fc9164b3dd220c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Change-Id: I2a9dc71ff7aadb19ebc129a0d47ac8cd33895924
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtGui][QWindow]QWindow::icon() now defaults to the application
icon, which can be set with QGuiApplication::setWindowIcon().
Change-Id: Id1974e5cda81775e515c14b294f67fb99351c6c9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
-title disappeared between Qt4 and Qt5, due to all the refactorings around QPA.
Making the caption of the mainwindow configurable allows custom setups
for specific users or use cases.
[ChangeLog][QtGui][QGuiApplication] Restore support for -title command line
argument on X11, add -qwindowtitle on all platforms.
Change-Id: I73e6bf21248f3419178eba583b257172a175e74e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Enable child widgets (without a native window) that render to an FBO
and are composed with the raster backingstore by the platform plugin.
A preliminary version of QOpenGLWidget is included as private API.
Change-Id: I8f984a4d7db285069ce3d6564707942c823d890d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Useful for bug reports and test logs.
[ChangeLog][QtCore] QLibraryInfo provides information on how
Qt was built.
Change-Id: I867197fd7d2e10bcdf01a8eb47c9c1e03647e2c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid dereferencing the q-pointer if the button has been
destructed meanwhile popup was open.
Task-number: QTBUG-26956
Change-Id: I68190e9fe84c669229ae0ce4d573ee7a02a8a141
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Allow configuration of logging rules from outside of the application,
either through a configuration file (.config/QtProject/qtlogging.ini),
or through a file specified by a QT_LOGGING_CONF environment
variable.
The logging rules from the different sources are concatenated: First
the rules from QtProject/qtlogging.ini are applied, then
QLoggingCategory::setLoggingRules(), finally from the environment.
This allows an application to overwrite/augment the system wide rules,
and in turn that can be tailored for a specific run by setting a
configuration in the environment variable.
[ChangeLog][QtCore][Logging] The logging framework can now be configured
with an .ini file.
Change-Id: I442efde1b7e0a2ebe135c6f6e0a4b656483fe4b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They cause test failures from time to time.
Change-Id: I917bef340401d25bf54e133be9d9562b3b133c9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Niels Weber <niels.weber@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
... which is needed to negotiate the SPDY protocol.
[ChangeLog][QtNetwork][QSslConfiguration] Added support for the Next
Protocol Negotiation (NPN) TLS extension.
Task-number: QTBUG-33208
Change-Id: I3c945f9b7e2d2ffb0814bfdd3e87de1dae6c20ef
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Passing a constructor as second argument to foreach didn't work when
building with gcc.
For MSVC this already worked as a different foreach implementation is
used.
Change-Id: Id98444c699b4cebc14ea62076c5f7cba33ffb824
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The RGBA8888 formats was incorrectly using the qt_gradient_quint32
which is argb specific. This caused vertical gradients but only
vertical gradients to be drawn incorrectly.
This changes the RGBA8888 formats formats to use the generic gradient
method and renames qt_gradient_quint32 to qt_gradient_argb32 to
indicate its limitation.
Change-Id: Ia1cd48ca7f4f78b64f31d6263e81cd8ac3b0954e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
The debug output of all categories will be visible by default,
except from the "qt.*" categories. "qt.*" categories are private
and their default debug output will be hidden.
[ChangeLog][QtCore][Logging] Enable qCDebug's for all categories except qt one's
Change-Id: Ibe147c8bbe0835a63b3de782288b9c3251321d8f
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
private api, but useful for 2d gui code that suddenly finds itself
needing to get a set of textures onto some fbo
I didn't want to include ARB_copy_image since it looks like its from
texture/renderbuffer -> texture/renderbuffer while this class implies
texture -> write fbo. We could wrap ARB_copy_image in QOpenGLTexture or
some other class or we can add it later.
I have not added any QOpenGLTexture functions since this class opperates
on the GLuint identifier. We can add overloads later.
Change-Id: I3e565b33466c1c183a249a33c3e82c6786debd55
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The basedir xdg spec says:
"All paths set in these environment variables must be absolute.
If an implementation encounters a relative path in any of these variables it
should consider the path invalid and ignore it."
Therefore we ignore relative paths including the empty string.
Change-Id: I8f779b78981018051b16de23b2514f2e62b7ab39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QScreen::grabWindow() is not always reliable because it grabs from the
framebuffer. (The window might then be covered by other windows, e.g.
"Stays on top"-Windows, popups etc).
If QScreen::grabWindow() fails we therefore fallback to
QWidget::grab(). This will not grab from the frame buffer, but it will
ask the widget to render itself (with its current state) to a pixmap
and return it.
QWidget::grab() should usually return the expected pixmap, and the
pixmap it gives is not subject to the state of the window manager.
This means that both QScreen::grabWindow() *and* QWidget::grab()
must produce an unexpected pixmap in order for the test to fail.
Change-Id: I276554155bb1e5b510d2a2d43628d91669464fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Code units 0xD800 .. 0xDFFF are not UCS-4, so we can't happily return them.
Instead, if we encounter a stray surrogate, replace it with 0xFFFD, which
is what Unicode recommends anyhow.
References:
§3.9 Unicode Encoding Forms
D76: Unicode scalar value: Any Unicode code point except high-surrogate
and low surrogate code points.
As a result of this definition, the set of Unicode scalar values consists
of the ranges 0 to D7FF_16 and E000_16 to 10FFFF_16, inclusive.
[...]
UTF-32 encoding form: The Unicode encoding form that assigns each Unicode
scalar value to a single unsigned 32-bit code unit with the same numeric
value as the Unicode scalar value.
§ C.2 Encoding Forms in ISO/IEC 10646
UCS-4. UCS-4 stands for “Universal Character Set coded in 4 octets.” It is
now treated simply as a synonym for UTF-32, and is considered the canonical
form for representation of characters in 10646.
§ 3.9 Unicode Encoding Forms (Best Practices for Using U+FFFD)
and
§ 5.22 Best Practice for U+FFFD Substitution
Whenever an unconvertible offset is reached during conversion of a code
unit sequence:
1. The maximal subpart at that offset should be replaced by a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
maximal subpart.
[...]
Whenever an unconvertible offset is reached during conversion of a code
unit sequence to Unicode:
1. Find the longest code unit sequence that is the initial subsequence of
some sequence that could be converted. If there is such a sequence, replace
it with a single U+FFFD; otherwise replace a single code unit with a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
subsequence which has been replaced.
[ChangeLog][QtCore][QString] QString::toUcs4 now does not return invalid
UCS-4 code units belonging to the surrogate range (U+D800 to U+DFFF)
when the QString contains malformed UTF-16 data. Instead, U+FFFD
is returned in place of the malformed subsequence.
Change-Id: I19d7af03e749fea680fd5d9635439bc9d56558a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That commit made QString::toXxx (8-bit) functions use C++11 ref
qualifiers, so we need to match it here.
Change-Id: I45b50464d36f858d012b12e0cb511aae347ddb6f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
UCS-4 iterator over a QString.
Kept private for now so we can still work on the API.
Done-with: Thiago
Change-Id: I377f8bb1921e591ee3292c08c3e097fb6bc7f0c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because they make sense. I'm even thinking that the char16_t version
should get a QString implicit constructor. Maybe both encodings.
Change-Id: Ifffc61dd890795fbbbd5f7cb5efb3e6287d1270e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Showing, moving and resizing
Contrarily to what an NSWindow does to its NSViews, child NSWindows need
to be explicitly shown and hidden, and clipped if the parent NSWindow
changes geometry. Also, hiding an NSWindow will not hide its child
windows. This needed to be managed manually, adding 2 additional states
to QCocoaWindow to reflect whether a child window has been clipped out by
any ancestor geometry change, or hidden by any ancestor being hid. Also,
ordering out an NSWindow will remove it fromm its parent's child windows
array, making necessary to maintain a parallel list of child windows in
QCocoaWindow.
Stack order
Although child NSWindows can be ordered relatively to each other, they
need to be added again to be moved lower in the window stack. This also
means the windows above it need to be added on top.
Key (focus) status
One of the remaining issues, is to make sure the top level window keeps
the "key status" while still forwarding key events to the child window.
Keeping same event propagation
This use case is best illustrated with undocking QDockWidgets (if these
are child NSWindows). The main issue is to make sure the QDockArea will
get the mouse events right after undocking a dock widget. We used a similar
workaround as the "key status" problem, and manually forward the mouse
events to the dock area's QWindow.
Manual test, by Morten Johan Sørvig, included.
Task-number: QTBUG-33082
Task-number: QTBUG-22815
Change-Id: I50e34936fb82bff013e99f4bcb3bd0db0704c6ae
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Make the printer selection option api public on Windows to be
consistent with Mac, and with the print program api which is already
public.
Change-Id: I3da9684288348eaa43276ca8534a1d5809f7027b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac and Windows print engines to preserve the
creator name when switching between native and pdf format.
Change-Id: Ie036af3140f24d8e34aa886f091384f93aa0157b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Mac supports Collate Copies using native api, so add support. Note
this is mostly only useful for setting the print dialog default, as
Mac supports server-side multiple copies so the app will never need to
collate the copies itself.
Change PDF and Windows to default to collate true to match Mac as this
is the behavior users expect.
Task-number: QTBUG-27724
Task-number: QTBUG-35251
Task-number: QTBUG-22144
Change-Id: Ia43dbc260b3a71aa5b267cca54c168ffbea794fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac print engine for set/get the Document Name using
the Job Name setting. Our documentation states this is one use that the
document name will be put to so is appropriate to be used.
Change the Windows print engine to default to a blank Docuemnt Name
consistent with the other print engines. If still blank when printing
then use a default value.
Task-number: QTBUG-27724
Task-number: QTBUG-22144
Change-Id: If590811b5720e6f759eabc290b578b94e221f9f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The PrintEngine keys are not consistently treated across the platforms
and are not properly tested. Start the process of making the print
engines behave consistently by documenting and testing the current
behavior. Ensure all unsupported features return a consistent
default value.
The auto test for valuePreservation() has been flaky depending on the
platform and installed printers so remove it and replace it with more
complete testing. If no native printers available then don't test
the native engines.
Fixes for the individual inconsistent keys will follow.
Task-number: QTBUG-26430
Change-Id: Iab914d7e0a5ae4a2cdc24c8645751f0910cf440c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes the following case:
<blockquote>
<span />Foobar
</blockquote>
Qt would see the end of <span>, and consider the current block
tag as closed, thus resetting the block format, thus losing the
margin set for the current block (due to blockquote).
If you do
<blockquote>
<span>Foo</span>Foobar
</blockquote>
instead, then the same would not happen, since hasBlock is set
to false when we append text to the current inline node.
[ChangeLog][QTextDocument] Add support for empty inline elements
in block tags.
Task-number: QTBUG-33336
Change-Id: Ic566edfec96cb8d44d1c02932bb195bc921d1580
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This fixes a serious regression from
7d72516b52.
[ChangeLog] QFileSelector: the identifier for OS X has been changed back
to 'osx' from 'mac', and 'mac' and 'darwin' have now been added as
selectors for Darwin OS (which is the base of both OS X and iOS).
Task-number: QTBUG-35073
Change-Id: I83183e34c5a697338cc1ddcac33a41bd379ded12
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
When changing a filter so that a previously empty proxy model becomes
populated sorting was not applied correctly.
This was caused by using mapToSource for getting source_sort_column
from proxy_sort_column. For an empty proxy model this won't work because
no valid proxy index can be created in this case.
We now directly use the root index column mapping instead by doing
essentially the same as QSortFilterProxyModelPrivate::proxy_to_source
but without the sanity checks needed for external use.
The sorting feature of QSortFilterProxyModel has always assumed that
the number of columns is specified by columnCount(QModelIndex()) so
the behavior doesn't change.
[ChangeLog][QtCore][QSortFilterProxyModel] Fixed sorting when a
previously empty proxy model becomes populated because of a change in
the filter.
Task-number: QTBUG-30662
Change-Id: I21322122e127889dfadc02f838f0119ed322dcab
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It was impossible to hide/show the close button after a QMdiSubWindow
was created.
Task-number: QTBUG-9933
Task-number: QTBUG-27274
[ChangeLog][QtWidgets][QMdiSubWindow] Fixed setWindowFlags() for QMdiSubWindow.
Change-Id: I7db9a1bef5ba8a8ace729acb85682c8b3de9c33c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add overloads to the find() methods in QPlainTextEdit and QTextEdit
that find the next occurrence matching the passed regular expression.
These are convenience methods that eliminate the need to use the
document() method and the need to handle the QTextCursor return value.
[ChangeLog][QtWidgets][QPlainTextEdit] Added find method overload using QRegExp
[ChangeLog][QtWidgets][QTextEdit] Added find method overload using QRegExp
Change-Id: Ia6139b771e3ae4ca02e4b8ea7fde19e5dc71b9d8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When drawing to and from the less common formats most of the cpu time
is spend in conversion. The conversion method is rather slow due to
using variable shifts and masks that the compiler does not have a chance
to optimize.
This patch changes the conversion methods to being templates fed by
constexpr methods. This allows the compiler to fully optimize the methods
yielding 2x->5x speedups.
The reliance on constexpr however means the optimized methods are only
used under C++11.
Change-Id: I2ec77c4c1c03f12ee463a694a2b59db0f0b52db1
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This makes the font merging possible and solves an issue
with the default font properties inheritance when used
in conjunction with QTextFormatCollection.
Change-Id: If8b543c011122dde9f086f5d696df3b042f7b90c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
introduced by b0b22e8d49 .
Change-Id: Ia57331ce9373a414f2bc56962412f20ef83bd7ca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This simplifies the code a lot and avoids silly mistakes where a
specific integer type is missing (such as char16_t).
Change-Id: Id91dfd1919e783e0a9af7bfa093ca560a01b22d1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
...and thus consume 4 bytes less per glyph and increase the performance a bit.
It seems, the only CTFontGetAdvancesForGlyphs() returns both x and y
advances, though y advances are always equal to 0 for horizontal
orientation and x advances are always equal to 0 for vertical orientation.
Also, rename `advances_x` to `advances` for consistency
and declare QGlyphLayout's data size in a single place.
Change-Id: I56b20f893f8a6feb7aa870e3edbca99dd93ba2e2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
A few more HTTP status codes from the 4xx and 5xx series have been
added to QNetworkReply::NetworkError.
For content errors, the following codes have been added:
1. 409 - Resource Conflict
2. 410 - Resource Gone
For server related errors, the following codes have been added:
1. 500 - Internal Server Error
2. 501 - Operation Not Implemented
3. 503 - Service Unavailable
Few of the above codes are quite possible when communicating with REST
based services.
NOTE:
=====
* HTTP error status 400 is interpreted as
QNetworkReply::ProtocolInvalidOperationError.
* QNetworkReply::UnknownServerError is returned for all server related
errors (5xx) not listed above.
[ChangeLog][QtNetwork][QNetworkReply] Added more (specific) HTTP status
codes to NetworkError enum.
Task-number: QTBUG-30880
Change-Id: I9d2a133f6b3869f26710c6eb930dd8b08df31108
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This aimed to disctinct joining types "L", "T", and "U" from just "U".
Unicode 6.3.0 has introduced a character with joining type "L" and
Unicode 7.0 will add a few more characters of joining type "L", so
we'll have to deal with it anyways.
[ChangeLog][QtCore][QChar] Added JoiningType enum and joiningType()
method that deprecates the old QChar::Joining enum and joining() method.
Change-Id: I4be3a3f745d944e689feb9b62d4ca86d1cf371b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QImage::pixel() returns the raw underlying pixel values for
RGB32. For all other pixel formats the returned value is either valid
ARGB32 or ARGB32PM.
This patch masks the undefined alpha field in RGB32 so that the return
value is well defined QRgb. It also fixes one test that relied on the
previous behavior.
Change-Id: If37463528268b7419733499d1f7bfd0d1097d21e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Currently INV_PREMUL rounds strictly down. While PREMUL rounds evenly.
This patch adds 0x8000 to the intermediate results in INV_PREMUL before
right shifting, thereby achieving even rounding.
The rounding also makes PREMUL(INV_PREMUL()) into an identify operation,
which means we can safely convert ARGB32PM to ARGB32 and back without
ever losing color details. A test is added to verify this.
Change-Id: I1267e109caddcff0c01d726cb5c1c1e9fa5f7996
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Each model test gets its own temporary directory, thus there is no problem parallelizing them.
This should reduce the time spent for a testrun of qtbase by around 3 minutes.
When running only the sql tests it saves less since there are no other tests to run in parallel.
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 43 seconds
Serial tests: 4 minutes 42 seconds
Parallel tests: 1 second
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 second
=== Totals: 12 tests, 12 passes ================================================
After:
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 7 seconds
Serial tests: 50 seconds
Parallel tests: 3 minutes 17 seconds
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 minute 23 seconds
=== Totals: 12 tests, 12 passes ================================================
Change-Id: I355ceed62fae852ad8cd442848e263438afb738e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
q_func() which is declared in Q_DECLARE_PUBLIC is usually private.
We should use q_ptr directly in QObjectPrivate::connect, otherwise
it does not compile when trying to access the private q_func
Change-Id: I235165a0994327102dbb31c390c2cafdffe806dc
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch adds tests for the consistent handling of transparent
drawing results on opaque formats that was introduced with commit
6f7d370ade
Change-Id: If5d11d0f2e111ef88490a4dc20a64b0858ad5426
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This patch fixes an issue when a font that was added with QFontDatabase::addApplicationFont
can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont adds the font to the FontConfig
application set from where it cannot be removed any more and is picked up every time the font database is
repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does not fail on linux, because it tries
to add "FreeMono" (which in most cases is already there as a system font). So this patch removes FreeMono and adds
LED_REAL as test font.
Change-Id: I2fa5f4df0ad2099ac28673760ea25234c725dfc6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Most of the test is executed in RTL mode since it is never restored.
Task-number: QTBUG-36395
Change-Id: I110966085a5a265f093fc4479eebc1f1bf0614c1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The tests then have a predictable, stable environment and do not depend
on file system operations.
Task-number: QTBUG-23697
Change-Id: Ibbd356f8bd7419ec4a3a88d2c0b5cd0830049790
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Implemented that way in src/widgets/widgets/qmdisubwindow.cpp:2081.
Change-Id: I82fdf0c04f1655a130c5e6a6f1e23d325d546ab3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The support for QArrayData variadic arguments without C++11 for GCC
has been removed in commit 69478da0f0 . Change the autotest to reflect
that, too.
Change-Id: I40468f5d67cb2db553fd7a7d5b604f46403ac538
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Even if the system is not under high load, this test can generate 4
updates on Windows. This is seems to be because the timer actually
triggers before its supposed to (sometimes the second start() triggers
an update right before the animation is done (at timestamp 399 for
instance), forcing it to generate yet another timer event in order to
reach the end)).
Under high load conditions, too many things can break this test,
usually it finishes even before the pause(), causing the
QVERIFY(animation.state() == QAbstractAnimation::Paused);
to fail.
Change-Id: Id94c0d16656675bc6165b7795f3c41a30616a3ba
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Add ref qualified versions of QImage::convertToFormat, so that a
temporary QImage can be converted in-place to a format of equal depth.
[ChangeLog][QtGui][QImage]Added rvalue qualified convertToFormat method
for in-place conversion
Change-Id: I2eed5ffd63f5aea4ffa1147bf7607b02a49d9c5d
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
According to my profiling of Qt Creator, qHash and the SHA-1 calculation
are the hottest spots remaining in QtCore. The current qHash function is
not really vectorizable. We could come up with a different algorithm
that is more SIMD-friendly, but since we have the CRC32 instruction that
can read 32- and 64-bit entities, we're set.
This commit also updates the benchmark for QHash and benchmarks both
the hashing function itself and the QHash class. The updated
benchmarks for the CRC32 on my machine shows that the hashing function
is *always* improved, but the hashing isn't always. In particular, the
current algorithm is better for the "numbers" case, for which the data
sample differs in very few bits. The new code is 33% slower for that
particular case.
On average, the improvement (including the "numbers" case) is:
compared to qHash only QHash
Qt 5.0 function 2.54x 1.06x
Qt 4.x function 4.34x 1.34x
Java function 2.71x 1.11x
Test machine: Sandybridge Core i7-2620M @ 2.66 GHz with turbo disabled
for the benchmarks
Change-Id: Ia80b98c0e20d785816f7a7f6ddf40b4b302c7297
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Moc should check full scope of any related objects or
gadget when it constructs extra data.
Change-Id: Ibd1b607a389cd4e788c0916984464cd9103d9c59
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add support for using qCDebug and friends in the 'printf style' way.
This allows an almost mechanical conversion of existing qDebug, qWarning,
qCritical macros, and allows avoiding the size overhead the streaming
style incurs (mostly due to inlined QDebug code).
To handle this gracefully we require variadic macros (part of
C++11/C99). For compilers not supporting variadic macros we fall back
to checking the category in QMessageLogger.
[ChangeLog][QtCore][Logging] Allow qCDebug macros to be used in a printf
style.
Change-Id: I5a8fb135dca504e1d621bb67bf4b2a50c73d41b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some comparison operators comparing to const char *
where not implemented correctly.
Task-number: QTBUG-34024
Change-Id: Idbdc64c8ed93e88d9f2b2f55213bc785b33cb543
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Task-number: QTBUG-35743
[ChangeLog][QtTest][Windows] Use correct UTF-8 encoding for XML test results on platforms with different console encoding.
Change-Id: Ice9d03192098f931e5dac358928e0c4421ab715e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
