Layered (translucent/non-opaque) windows do not receive WM_PAINT,
expose events need to be generated. Improve
6800728d09 to handle transient
children as well.
Task-number: QTBUG-17548
Change-Id: Id113604512692dfbea1f2b10d0db3068213cf599
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes the diff clearer when adding plugin information
in a followup commit.
Change-Id: I857d9f71b08074f2ffa2f852ad72e5dd975adc3e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The call was resulting in inifinite recursion on OSX 10.9 when Qt was
built against the 10.7 SDK, as qt_mac_get_fixed_pitch uses QFontMetrics
to resolve the pitch, and we would end up in the font resolver again
when asking for the metrics.
The CoreText font-database already takes care of resolving whether or
not a font family is fixed-pitch, so the code is likely a leftover
from the ATSUI-days, and can be removed.
Task-number: QTBUG-31803
Change-Id: I37c90fa637927eb4adc16c0fd556c4c46c456034
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When suspending the app we would destroy the surface twice,
causing libEGL to output a warning on the second attempt.
We would also destroy the surface before all references were
released which is not 100% nice. We don't need to call the
super class implementation at all, since we are managing
the EGL surface ourselves.
Change-Id: Ie1ab2ea8561d0018b5f16ac8cdf3296313a0a92c
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
It is not guaranteed that buffers are cleared when they
are allocated. So don't use a buffer for the root window,
and clear buffers for the actual content.
Change-Id: I42939baec03fa05968c83bbf2739ab8d1d70c8be
Reviewed-by: Matt Hoosier <matt.hoosier@garmin.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This reverts commit aa1b4c0943.
It turns out that the bug is caused by a different mask constant
in Windows 8 which should not take effect in pre-Windows 8.
Change-Id: I1ad502262dae42856c07d48ee3bc9dc032ab379b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The first word of the .name variable of each extra compiler is
used as a key in a container that keeps track of them. See also:
qmake/generators/win32/msvc_objectmodel.cpp: VCProjectSingleConfig::filterForExtraCompiler
qmake/generators/win32/msvc_vcproj.cpp: VcprojGenerators::initExtraCompilerOutputs
Task-number: QTBUG-32912
Change-Id: I7ea5c58884db559621f50740075b7f2e4e3ef7f8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since it's possible to call the function on an
empty model, return failure in that case.
Change-Id: I0a0eabe917da3e6294bdd616a85579f6dc894ec8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
XI2 sends events for individual touch points, but QTouchEvent
sends all of them with a stationary state if they didn't change.
If a touch pressed event is received, and the next XI2 event
is about a different touch point, we wouldn't update the state
of the previously pressed touch point.
Change-Id: I1ebcbea1cea54872064ef7710e2aac7b0b41cd70
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
C99 defines the "I" macro in complex.h. qobjectdefs_impl.h can be
indirectly included in user code, which raises the possibility of a name
clash if the user's compiler supports C99 and the user includes
complex.h
Change-Id: Ie79ec7baf2d49a34b66a01556c7e57324303dc04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests use local coordinates, but window->geometry() gives the
global position on the window, i.e. offset by the size of the
decoration.
Change-Id: Id63ffd7e160b77ddb0f5563d8c3c65c36ad45e89
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We don't use exceptions anyway, so we can safely ignore this warning.
Task-number: QTBUG-32833
Change-Id: Id78cb99770f37a076de3a95721ba40795a8a7b57
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
We kept using qInstallMsgHandler in testlib to not break test cases using
it too. However, this breaks tests using qInstallMessageHandler ...
ChangeLog: QTestLib: Test cases have to use qInstallMessageHandler instead
of the (deprecated) qInstallMsgHandler
Task-number: QTBUG-32391
Change-Id: I3bd95d9b0a48749243a5dd3e074df8ebcbc07dce
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Windows configure does not have -device-option yet.
A hack for android already generated the
qdevice.pri. But it did this even if no android
was build, so merged the device-option with the
android generation of qdevice.pri. The qdevice.pri
is generated earlier in the configure steps than
before to match the linux configure and allow
to set device options before the config.tests
are run.
Change-Id: I753cf0d5eba1479792a685d6e1f5acb38b970893
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in scanning any of it.
qdoc already excludes itself (and will hopefully move out of qtbase
soon), so not adding it here.
Change-Id: I84356c0988be386de331bb7879b3ebd2108526a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
under normal circumstances, any errors will be noticed already by the
pkg-config --exists call, which is silent anyway. therefore this doesn't
change anything in normal qmake usage.
however, lupdate's and creator's evaluators skip the --exists calls and
subsequently invoke the normal query, which then prints useless noise to
the terminal.
Task-number: QTBUG-28159
Change-Id: I536412060f3830aafeb0587f855cd6af11227bca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
whatever it was used for is long gone.
Change-Id: Ifab7ae7968b1ab65982b1a6414274b3502bbc3d0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Optimize the parser of the X11 compose tables. Parsing these was
responsible for over 90% of the startup time in Qt 5.1.
Change-Id: Ifddc3f30828791e51a755f92791c26ffe43a9cd3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Windows CE 5 and the depending Windows Mobile
is not supported.
Change-Id: I81b9599f837590a1375b6340e58c47b478c079ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Sections may be hidden => QStyleOptionHeader::position must reflect the
state seen on the screen. Otherwise styles will give wrong visual
results.
Task-number: QTBUG-32203
Change-Id: I7ef86496be092bf6f52ec45f757b501f38c3a431
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
To avoid using modifier keys when releasing a two-finger
mouse wheel flick on a trackpad, we listen to event
phases. But for a normal mouse, a separate phase
NSEventPhaseNone is given. Ensure that we still send
modifier keys when that state is reported.
Task-number: QTBUG-32098
Change-Id: Ib840dd661b7842ae49127e5a8d42e3666ae2da4e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A QWindow should keep its title after removing and restoring the
frame, so set it if we are setting window flags that include a frame.
Task-number: QTBUG-32978
Change-Id: I0fe1b651eac05a210b06ec4f7f6fb78f2536834d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
