Some directories that depend on QtGui were being included without the
appropriate check for qtHaveModule(gui).
Change-Id: I7c348c74464d44cbd35a027f188f8a23bb2021d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Our implementation of compose table parser was added on Mar, 2013.
libxkbcommon added APIs for the same thing in Oct, 2014 (ver: 0.5.0).
After removing RHEL 6.6 from the list of supported platforms we were
able to move the minimal required libxkbcommon version to 0.5.0. Now
we can use the xkbcommon-compose APIs on all supported platforms.
With this patch we can drop nearly 1000 lines of maintenance burden.
This patch fixes user reported issues with our implementation.
Known issues:
- Testing revealed that xkbcommon-compose does not support non-utf8 locales,
and that is by design - https://github.com/xkbcommon/libxkbcommon/issues/76
Our implementation did work for those locales too, but it is unclear
if anyone actually uses non-utf8 locales. It is a corner case (work-arounds
existing) and likely a configuration error on the users' system.
- Looking at the release notes for versions above 0.6.1, only one issue
that stands out. Compose input does not work on system with tr_TR.UTF-8
locale, fixed in 0.7.1. Compose input works fine when using e.g. en_US.UTF-8
locale with Turkish keyboard layout.
Note:
With Qt 5.13 we have removed Ubuntu 16.04 and openSUSE 42.3 from CI:
Ubuntu 16.04 - 0.5.0
openSUSE 42.3 - 0.6.1
CI for Qt 5.13 has:
Ubuntu 18.04 - 0.8.0
RHEL-7.4 - 0.7.1
openSUSE 15.0 - 0.8.1
Currently the minimal required libxkbcommon version in src/gui/configure.json
is set to 0.5.0, but we could bump it to 0.7.1 to avoid known issues from above,
but that is a decision for a separate patch.
[ChangeLog][plugins][platforminputcontexts] Now using libxkbcommon-compose
APIs for compose key input, instead of Qt's own implementation.
Fixes: QTBUG-42181
Fixes: QTBUG-53663
Fixes: QTBUG-48657
Change-Id: I79aafe2bc601293844066e7e5f5eddd3719c6bba
Reviewed-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit d3eb9e944a)
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QListView::setSelection() algorithm is designed for items to
occupy their cells completely, which is not the case when
itemAlignment is used. The middle part of the selection rect
goes beyond the column borders and extra items are selected.
Use the introduced cellRectForIndex() instead of rectForIndex()
to calculate the middle part correctly.
Fixes: QTBUG-73684
Change-Id: I4a1e42a056d56e85a16d8ae0ffe18b78d1d6deb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The standard astc encoder has its own file format.
Change-Id: I9a2f7b1fa20ba344b79637bafb50ff2bd0596747
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Regular update in preparation for 5.13, adding tests for additions
since 5.9.4/5.10.1/5.11.0's update 7e946030 (the last to record its
upstream version sha1). Corrected the license header: it's now
published under MPL 2.0 (not 1.1); and our secondary licensing of it
is as LGPL3. Deferred full header over-haul until we've worked one
out in detail.
[ChangeLog][Third-Party Code] Updated DNS public suffix list
Task-number: QTBUG-72623
Change-Id: Iabdbbbfd79624830396c2a6fe0a73389bd6ce5b7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new test tst_QTouchEvent::touchOnMultipleTouchscreens()
needs the touchpoint IDs to be predictable, but another test currently
has a QEXPECT_FAIL; without release events, g_pointIdMap continued to
hold the touchpoints that were there when the test failed. So it's
necessary to add QWindowSystemInterfacePrivate::clearPointIdMap()
to be able to call it in the test cleanup function.
Fixes: QTBUG-73830
Change-Id: Ia6a70d028be95cd2b6676db6363ec408c0b116bc
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
With a QTreeView it is possible that collapsing an item can cause the
item under the mouse to be a new one and over the checkbox area for the
new item. As a result, a release can cause it to change the check state
even though it did not get the press for that item. This ensures that
it only allows the edit if it got the press as well.
Fixes: QTBUG-61476
Change-Id: I9a0821466afc84c97c9819755ccbacd729f7fbd7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to removal of insignificant flag in
tst_qfilesystemmode.pro a bunch of tests will
either fail or crash in different operating systems.
Task-number: QTBUG-70572
Task-number: QTBUG-70573
Task-number: QTBUG-29403
Change-Id: I44925187acd72e600d2fec4f2604b67c66ecdd6b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Blacklisting did not work as blacklist should have contained osx
instead macos
Change-Id: Ifd76a38d371ccce545eb5df030aaa819b00a5b48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
1. Fix erroneous logic, which was triggered in 'h2' mode (non-TLS connection)
- after the initial protocol upgrade/POST request was handled, the server
(on Windows specifically) was erroneously handling upcoming DATA frames by replying
with another redirect response.
2. Make the test less heavy by sending 1 MB of Qt::Uninitialize instead of 10 MB
- theoretically this could cause a timeout before the redirected request finished
successfully.
Task-number: QTBUG-73873
Change-Id: I961e0a5f50252988edd46d0e73baf96ee22eef3f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
One of the tests was not added to the parent subdirectory pro so this
is also rectified.
Change-Id: I270f1c2882260e3e3fac83d074ed6444c5dece19
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In 3ccdeb4b58, we removed the
specialized multi font engine on Windows, causing us to go
through the same code path when loading fallbacks as on
other platforms.
When combined with 97f73e9577,
this caused an error, because the code in
QFontEngineMulti::loadEngine() only overrode the families
list, but not the singular family in the request. In the
QRawFont test, this would cause the requested fallback font
to correctly have "MS Shell Dlg2" as the only font in the
families list, but the request.family would still be
"QtBidiTestFont", the name of the main font. The singular family
in the request was preferred by the windows font database when
creating the LOGFONT. We would therefore load the latter for
the fallback as well and since it still does not support the
characters in question, we would continue searching.
Fixes: QTBUG-72836
Change-Id: I1787b57febcf6030d5c5b09bc2ef2c9558f05beb
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The QImage API can not handle images with more bytes per line than what
an integer can hold.
Fixes: QTBUG-73731
Fixes: QTBUG-73732
Change-Id: Ieed6fec7645661fd58d8d25335f806faaa1bb3e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As winrt does not have native windows, exposure check was just done by
checking, whether the window is the active window. If a window is shown
fullscreen though, winrtscreen will be resized. This resize triggers a
resize of every maximized or fullscreen window that is shown.
If we enter or leave full screen mode, we have to wait until the screen
resize and the subsequent window resizes are done and only then we can
consider the windows properly exposed.
This patch reverts 54bcb9d42f and thus
unblacklists tst_QGraphicsItem::cursor on WinRT.
Fixes: QTBUG-73545
Change-Id: If469fce319ed6b3a5d56b7bf3cbc11929b72bb11
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Prevent automatic insertion of line-breaks in blocks formatted with 'white-space:nowrap'.
This follows the example of white-space:pre.
Fixes: QTBUG-54787
Change-Id: If26f6a54106a02fe0e388947f6368ae4e86acf63
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some QSpinBox tests start failing after reverting to using legacy mouse
messages to handle mouse input in the Windows QPA. It seems to be caused
by a test that runs before it and moves the mouse cursor. Then when the
QSpinBox tests run, they create widgets that appear below the mouse
cursor, causing some mouse events to be generating and messing with the
events synthesized by the test itself. With the pointer messages being
used for mouse input, the legacy mouse messages that are generated under
this condition were being ignored. But by reverting to the old
implementation, the legacy messages are handled again, causing the test
to fail. This change moves the mouse pointer to a safe position during
the test initialization, so it does not depend on the state left by
previous tests. This change needs to be integrated together or before
the change in the windows QPA.
Change-Id: I91f7e9376dc495ee61250e0a7d908c1c2b685bc8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QFileDialog::setConfirmOverwrite()/confirmOverwrite()
- QFileDialog::setReadOnly()/isReadOnly()
Change-Id: I3cc1df76c8e40e95b8e9893ae06ef488fad26fb6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Now that MSVC (presumably) supports templates, we can merge the QRect
and QRegion versions of the functions into one.
The function has been renamed to invalidateBackingStore to better
reflect what it's doing.
Change-Id: I0e94a0cabd286cf97f2ba718a42ee0425f59d3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test fails on minimal and offscreen platforms.
Task-number: QTBUG-73522
Task-number: QTQAINFRA-2630
Change-Id: I6260454be35a8bbac1ab683d89fb7b262d3b69ab
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The coin agent starts to crash after the docker-compose call.
Need to have qt5 5.13 integrated first, then fix the real issue later.
Task-number: QTQAINFRA-2717
Task-number: QTQAINFRA-2750
Change-Id: I3dcd963b1c5cea0b2197f1589398d8a9ed18f46f
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After the system reboots, the docker machine is created, but in a
stopped state. As stated in the docker docs, you might get errors when
attempting to connect to a machine or pull an image from Docker Hub.
For instance, Error checking TLS connection: ...
The solution is to regenerate TLS certificates of docker machine after
machine resums.
Change-Id: I8781ac0f0790aeda6cc778aee9c44d03c2b788d3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][SSL] The Schannel backend now supports ALPN and
thus HTTP/2.
Change-Id: I1819a936ec3c9e0118b9dad12681f791262d4db2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QTextFormat::setAnchorName()/anchorName()
- QTextList::isEmpty()
Change-Id: Ic1f5317980d116c846def3645d2a6cd61ba8679d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Windows and macOS, the containers are deployed into a virtual
machine using the host network. All the containers share the same
hostname (qt-test-server), and they are connected to the same network
domain (local).
When running test in such platforms, use the single-name SSL certificate
(qt-test-server.local) for SSL related tests.
Change-Id: Idf33e01e8dd8814510d848b87b59b5fc0edc903e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QItemDelegate::comboBox() is flaky because sometimes the used
QTableWidget does not yet have the focus which prevents a correct
editing. Fix it by explictily setting the focus on the widget after it
is shown.
A similar fix was added for dateTimeEditor() in
9822d57d85.
With this patch the test no longer fails for my on opensuse, therefore
remove the blacklisting.
Task-number: QTBUG-67282
Change-Id: I907db662ca347f8e8d31e5be215a100377b159ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Non-local ASM labels break for this test when compiled with clang.
Change-Id: I15bd250a991c3b03bbc88459a6358090bd157444
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For some reason behavior of SecureTransport has changed from 10.12 to 10.13
and then to 10.14. On 10.13 SecureTransport fails upon receiving the server's
certificate with 'Unrecoverable error', before we can do a manual verification
and accept the certificate as trusted. Analysis of available source code
shows that they, apparently, do not like MD5 hash which our server is using.
Until certificate is updated on the server or we switch completely to
the Docker-based solution we have to BLACKLIST tests that connect to our
current network test-server. Oddly enough, on 10.14 SecureTransport is
less mean.
Task-number: QTBUG-69873
Change-Id: I7da1883e0970a2f6ddd8385f193b76116d6983e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
COMPOSE_CONVERT_WINDOWS_PATHS is supported by Docker and available
for you to configure the docker-compose command-line behavior. It
enables path conversion from Windows-style to Unix-style in volume
definitions. Users of Docker Machine and Docker Toolbox on Windows
should always set this to true.
Change-Id: Ib59756ad68482fdd889ce39ab1ab0118b5fc9071
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently only available for the OpenSSL backend to use but doesn't
actually rely on anything OpenSSL specific.
Move it so it can be used by the Schannel backend in an upcoming patch
Change-Id: Ia29b153bf3f29cff0d62a41ec5dd7d4671a18095
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While it's not common it still occurs, perhaps especially with 127.0.0.1
Can be tested by attempting to connect to https://1.1.1.1/ using Qt.
Change-Id: Idad56476597ab570b8347236ff700fa66ab5b1f4
Fixes: QTBUG-71828
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since some databases are case sensitive if part of the query is quoted,
then we should ensure that all instances of the table name are escaped
unless the test is delibrately testing the non-escaped case.
As a result, this commit also removes some expected failures pertaining
to PostgreSQL and also adds an entry to the list of tables being dropped
when a test is finished.
[ChangeLog][Sql][PostgreSQL] QSqlDatabase is now stricter about table
names when used with record() and primaryIndex(). If the tablename was
not quoted when it was created, then the table name passed to record()
and primaryIndex() needs to be in lower case so that PostgreSQL is
able to find it.
Fixes: QTBUG-65788
Change-Id: Id1f54cb66b761c39edf858501b730ede7eec1fd3
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change b86d0b6215 rearranged the
sequence of function calls when generating code adding QTabWidget
and QToolBox pages, not taking into account that the iconCall()
has a side effect (writing out icon definition) Revert that part
and add a comment.
Fixes: QTBUG-72980
Task-number: PYSIDE-797
Change-Id: Ie8fbaa36f21cd4408fb1f491195da5c260708e6c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Setting the fall-back network interface of danted's environment to eth0
by docker-compose file is redundant because the value of danted's
configuration (danted.conf) has been set to eth0 by default.
Change-Id: If2dea8daaf851577a573e201e9c50684916e5206
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For macOS and Windows, the test-server containers are deployed in the
VirtualBox (Boot2Docker). Because Boot2Docker is a lightweight Linux
distribution made specifically to run Docker containers, it doesn't
install avahi-daemon and support mDNS discovery.
To resolve this problem, Docker compose file supports "extra_hosts" to
add hostname mappings inside containers.
BFAIL items:
tst_QNetworkReply::headFromHttp(...+proxy...) (ten cases)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http2)
tst_QNetworkReply::ioGetWithManyProxies(http-on-multiple-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http+socks)
tst_QNetworkReply::ioGetWithManyProxies(http-on-ftp+http+socks)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxy) (twelve cases)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxyauth) (ten cases)
Change-Id: Iec55966a9b5f191b7446985a15b49a8b09dcf407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Docker compose file supports variable substitution. When running
docker-compose up, Compose looks for the environment variables from
shell and substitutes the values at runtime.
Change-Id: I5255ead82276fac7db24ee74af453f83ca20bbe6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no docker bridge on Windows. Docker document recommends using
port mapping to connect to a container. The problem is that it causes a
port conflict if the user is running a service that binds the same port
on the host. This change applies the same solution of macOS to deploy
the docker environment into VirtualBox and use the host network option.
Task-number: QTQAINFRA-2294
Change-Id: Iedcb8daa39373f02adb59f02eae2775f02870c54
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Apparently, it is not enough to just retry 10 times (10 seconds) in the
CI network. It happens from time to time that a test fails due to server
port is unreachable. Especially, the docker containers are running in a
virtual machine on Windows and macOS platforms. In such cases, it needs
more time to warm up the service depending on the system loading.
Change-Id: Ia0234bff2a82988b62f451e20b50671708784008
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adds support for Schannel, an SSL backend for Windows, as an
alternative to OpenSSL.
[ChangeLog][QtNetwork][Ssl] Added support for Schannel on Desktop
Windows. To build Qt with Schannel support use '-schannel' during
configure.
Task-number: QTBUG-62637
Change-Id: Ic4fb8ed3657dab994f9f4a4ac5cbddc7001a0a46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add qWaitForWindowExposed() for the toplevel and use QTRY_VERIFY()
for finding the delegates consistently.
Change-Id: I430088a91b5cc1a8f856d0a58aba066b1baf179b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Some of the spdy/3 tests don't pass anymore because those services
no longer support spdy/3. Solve this by updating it to HTTP/2 (h2).
Change-Id: Ib3ef6109b75f4298fed15c1c7922deca35459df9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The cursor test sometimes fails due to the fact that the topLevel widget
has not yet reached it's fullscreen geometry. This means the
QGraphicsView is to small and the test will fail.
Avoid it by simply removing the topLevel widget since it's not used at
all.
Change-Id: Ia7b34f283a917a35b6665e6333a01378575a5a04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run.
97b4c5a574 already accounts for it but
the current tag for creation date is '/CreationDate'. Therefore check
if the line contains 'CreationDate' instead.
Change-Id: I1fc069cf935bba07084ac4a0743ff05312374d10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output files for the tuplediagnostics selftest of testlib had a
stray non-canoical path fragment in them; so replaced with its
canonical form.
Change-Id: Ib421380036c3fb1b91447eb8c87be4ad0dfe5c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This appears to be a timing issue of vsftpd's initial script
(/etc/init.d/vsftpd). When starting the vsftpd service, the script uses
a while loop to make sure that the vsftpd process has been created with
the expected PID. The problem is that it should sleep if it can't grep
the same PID via ps command.
while [ ${n} -le 5 ]
do
_PID="$(if [ -e ...vsftpd.pid ]; then cat ...vsftpd.pid; fi)"
if ! ps -C vsftpd | grep -qs "${_PID}"
then
break
fi
sleep 1
n=$(( $n + 1 ))
done
if ! ps -C vsftpd | grep -qs "${_PID}"
then
log_warning_msg "vsftpd failed - probably invalid config."
exit 1
fi
However, synchronization based on time is not working in general. This
change will rewrite the while loop to an infinite loop and remove the
exclamation symbol (!) from the if condition.
Upgrading the version of vsftpd is not helpful here because
vsftpd_3.0.3-11 (Ubuntu 18.10) didn't resolve it yet.
Change-Id: I07382709c33bd9bab61fcea76ab7deca5f630084
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The bool is assigned on the previous line: QTRY_VERIFY will not do
anything because the statement is already true.
Change-Id: I067290e19ffd100819b2b631af431c6013623a00
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It was an implicit effect before which stopped working after
dec7961709. Reintroduce it as some
projects used this side-effect as a way to abort the initial
highlighting.
Change-Id: I5340ee9882a242bc8b5f7f843f1cfe793a65d357
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
When debug_and_release option is in use, qmake will generate one
mata-Makefile and two additional leaf Makefile (Makefile.Debug and
Makefile.Release). In such case, testserver.pri will be included in all
three passes. The problem is that the mata-Mafile is used to invoke leaf
Mafile recursively. The docker test server should only be integrated in
the leaf Makefile.
To resolve this problem, this change uses "!build_pass" condition to
determine whether this is a pass of meta-Makefile, and then skip it.
Change-Id: Ibc48d657680e089ebaa1bc356b87eb4cfd9f4580
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using the overload of QCoreApplication::processEvents that takes a
maxtime argument, the function will keep processing events until there
are no more events, or until it times out.
The problem is that the function doesn't distinguish between events that
were on the event queue when the function was called, and events generated
by processing events as part of its own execution. If for example a widget
calls update() in its paintEvent, the function will spin for the entire
duration of maxtime.
That doesn't work for qWaitFor, where we need to check the predicate
between each pass, so we use the overload of processEvents that doesn't
take a maxtime. That's fine, as we have our own timeout logic.
Change-Id: I9738d7d0187c36d4a5ddfcd3fd075b0bd84583c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as we normally do in other tests, using localhost.
Change-Id: I7969d7bfd50b545adae7e23476d17b6224e9a8fc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The tests of smb protocol only work in the CI network. Therefore,
the docker-based test server for Windows can't pass all the tests of
QNetworkReply.
These two tests should be reworked when adding Samba server to the
docker-based test servers later on.
Task-number: QTBUG-72861
Change-Id: I54e639b5414760ee929d0d28fe10f9e021aff7dc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As the mnemonic has no meaning when it is in a dockwidget title, we
should just treat it as a literal ampersand instead and display it
as such.
Fixes: QTBUG-54485
Change-Id: I96c856ce2771a68d226f48f8f47affc24f1c53cd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes it possible to get rid of specialized functions for
converting to RGBA64PM, while at the same time making the conversion
faster as the painter routines are better optimized.
Change-Id: I3e73856b2c1411977450e72af1741aab0ecf537e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This allows anticipating and reusing internal allocations of
QPainterPathElements instead of using the common `m_myPath = QPainterPath{}` pattern.
[ChangeLog][QtGui][QPainterPath] Added clear(), reserve(), capacity().
clear() removes allocated QPainterPath elements but preserves allocated memory, which can be
useful for application with complex paths that are often recreated. reserve() and capacity()
follow QVector semantics.
Change-Id: I763461e2a421feda9053d3eb512af2fcf07ade2b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The refactoring of dnd with f8944a7f07
added a regression which results in a need to reimplement
dragMoveEvent() on the drop side. Before this change it was possible to
accept the dnd in dragEnterEvent() without again accepting it in
dragMoveEvent().
Fix it in a similar way it's done in
QGuiApplicationPrivate::processDrag() by prefilling the first simulated
QDragMoveEvent with the values from the previous QDragEnterEvent before
it is sent to the drop receiver.
Fixes: QTBUG-72844
Change-Id: I1300dd02b7f1d9dcd44ecefa8335f92ad6c6cafa
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit c1fc47b06a.
CI is now running on 18.04 hosts and vmx is enabled on that level.
As the update in QTQAINFRA-2288, the macOS 10.13, openSUSE 42.3
and Ubuntu 18.04 had vmx enabled inside the VM.
Change-Id: I6ec4094ca826418f46f417b3cab89678bb089417
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The function is setting the brushes correctly in the return value, but
without updating the resolve_mask, making it return wrong results in
functions like isBrushSet or the debug operator.
Added a unit test for the member function, since the class is still
mostly untested, and clarified the reference documentation of what the
function is supposed to do.
Change-Id: Iaa820dc44f095e125f9375cb00da5569986803c6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The keyboard search in QAbstractItemView did not handled Key_Space
because this is also an edit trigger. It was also consumed if no edit
was started.
This patch changes this behavior and triggers the keybaord search when
the editing was not started.
Fixes: QTBUG-48505
Change-Id: I58e0d283f863c9b12ac5d2f6171f15522bd7c30a
Reviewed-by: David Faure <david.faure@kdab.com>
The keyboard navigation did not consider the disabled state when trying
to find the new index under all circumstances. This lead to a
non-working PageUp/Down/Home/End navigation when the first or last item
was disabled or hidden.
Fix it by explicitly checking if the calculated item is hidden/enabled
and skip it in this case.
Fixes: QTBUG-44746
Fixes: QTBUG-34832
Change-Id: Ifa3b64a405e67b792db5db9d186d426fcfe183fb
Reviewed-by: David Faure <david.faure@kdab.com>
QStringListModel::setData documentation states that
"The dataChanged() signal is emitted if the item is changed."
This patch actually respects the doc. setData will check that the data
actually changed before sending the dataChanged signal.
[ChangeLog][QtCore][QStringListModel] setData will now emit the
dataChanged() signal only if the string set is different from
the one already contained in the model
Change-Id: I4308a6f3b4851203fb899c5e29a36076e0c32f2f
Reviewed-by: David Faure <david.faure@kdab.com>
The grayscale font-smoothing doesn't expect to be linearly blended,
as first assumed.
Amended nativetext manual test to better diagnose the native Core
Text behavior. Non-linear blending will result in the magenta
text having a dark outline against the green background.
Change-Id: I24a5f04eb1bd66fb98d621078d80ee9b80800827
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since QSqlDatabase::database() cannot be used to access another database
from another thread, then the overload is provided to make it possible
to clone with just the connection name. This will handle the cloning
internally safely then.
Fixes: QTBUG-72545
Change-Id: I861cc5aa2c38c1e3797f6f086594a1228f05bada
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When eliding text we would check for the existence of the ellipsis
character and fall back to using the dot if it was not available.
However, when font merging was in use, we would also use ellipsis
from a fallback font if available. This could cause the metrics
of the text to increase if the fallback font had larger metrics,
and the result was that text could shift when elided.
It is better to prefer the dot from the current font than to use
the ellipsis from a fallback, so we only use the ellipsis if
it is in the main font.
[ChangeLog][QtGui][Text] Fixed a bug where eliding text could
change the height of its bounding rectangle for certain fonts.
Fixes: QTBUG-72553
Change-Id: Ib27fc65302465ddce661801bcc5ae32e55f1aeb9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
since we'll refuse to continue with a handshake, failing in initSslContext()
on a disabled protocol versions. Then, functions like waitForEncrypted,
connectToHostEncrypted, startServerEncryption and startClientEncryption
should either bail out early (who needs a TCP connection which we'll
abort anyway?) or bail out whenever we can, as soon as a disabled protocol
was found in a configuration. This change also makes the behavior
of different back-ends consistent, since it's a general code-path
that reports the same SslInvalidUserData error. Update auto-test to
... actually test what it claims it tests.
Task-number: QTBUG-72196
Task-number: QTBUG-72179
Change-Id: I548468993410f10c07ce5773b78f38132be8e3e0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The keyboard navigation with MovePageUp/Down and MoveEnd did not honor
disabled cells in all cases which lead to inconsistencies in the
navigation (esp. since MoveHome does honor them correctly).
Therefore make sure that all four move operations work consistent by
refactoring the code to use common functions.
Fixes: QTBUG-72400
Change-Id: I63fa3b626510d21c66f4f9b2b1bfb3261728ecaf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
C++11 added the new enum class key as well as enum struct. While the
former is likely the most known and used, the later can be used in the
same contexts and with the same effects.
Currently moc doesn't parse enum struct while it does for enum class.
This patch fixes this.
[ChangeLog][moc] moc now parses enum struct the same way as enum class
therefore that keyword can be used with the Q_ENUM macro as well as
Q_FLAG and Q_DECLARE_FLAGS.
Change-Id: Iaac3814ad63a15ee4d91b281d451e786b510449c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As per RFC 6176 (2011) and RFC 7568 (2015).
Code-wise, we're left with the decision of what to do with a few
enumerators in QSsl::Protocol; I've made TlsV1SslV3 act as TlsV1,
and adjusted the description of AnyProtocol.
A new test was introduced - deprecatedProtocol() - to test that
we, indeed, do not allow use of SSL v2 and v3. protocol() and
protocolServerSide() were reduced to exclude the (now) no-op
and meaningless tests - neither client nor server side can
start a handshake now, since we bail out early in initSslContext().
[ChangeLog][QtNetwork][SSL] Support for SSLv2 and SSLv3
sockets has been dropped, as per RFC 6176 (2011)
and RFC 7568 (2015).
Change-Id: I2fe4e8c3e82adf7aa10d4bdc9e3f7b8c299f77b6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There was a comment in the code that said:
// It seems we need to use invertedAppearance for Left and right, otherwise, things look weird.
It's not clear what that was referring to, but in its current state,
a slider with invertedControls set to true will not behave as expected:
pressing the left arrow key will decrease its value instead of increasing it,
and vice versa for the right arrow key.
As stated in the documentation (and by its name), invertedAppearance only
controls the appearance of the slider, and not the effect of key events.
Remove the comment and use invertedControls instead.
Change-Id: I13296cbda9244413978ef0d7f0856065f74fd0bf
Fixes: QTBUG-25988
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Don't do several tests at once in the test function. Instead, move
the extra tests to the data function. This makes it possible to easily
add a self-contained test (i.e row) for an upcoming fix.
Task-number: QTBUG-25988
Change-Id: I65c8d7620f01107f8f59c96896b1a641d97f5fdc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add a lookup for the affected enum values and use the names instead.
Task-number: PYSIDE-797
Change-Id: I6be166409000aff83d9465c9a3b2f37b44c5c085
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This solution is composed of two features:
1) C++ code generated by RCC uses two symbols exported from QtCore that
are only present if the feature was compiled in. If the feature was not
compiled in, this will cause a linker error either at build time or at
load time (if they were functions, the error could be at runtime).
2) Binary files generated by RCC have a new header field containing
flags. We're currently using two flags, one for Zlib and one for
Zstandard.
This means we now have binary RCC format version 3.
Change-Id: I42a48bd64ccc41aebf84fffd156545fb6a4f72d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Insufficient memory was allocated when asking GetDIBits() to convert to 32bit.
Fix allocation size and use a QScopedArrayPointer.
Fixes: QTBUG-72343
Change-Id: I45f79c913a243316e01bc6efed08e50ccc7d25f4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Changed 0 to nullptr, used more C++-style casts, simplified some
code for searching a button, and changed foreach to range-based for
loop.
Task-number: QTBUG-44131
Change-Id: I211b12751b0e2591d1d14294c31b51d52bb4e3f6
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The Qt and CoreText positioning is now in sync.
Change-Id: I0cbb5b150d1bef732674b8d42c64a040773a62ab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Previously, the C locale was treated as English because each back-end
takes the locale's bcp47Name(), which maps C to en. However, the C
locale has its own rules; which QString helpfully implements; so we
can delegate to it in this case. Extended this to sort keys, where
possible. Clean up existing implementations in the process.
Extended tst_QCollator::compare() with some cases to check this. That
required wrapping the test's calls to collator.compare() in a sign
canonicalizer, since it can return any -ve for < or +ve for >, not
just -1 and +1 for these cases (and it'd be rash to hard-code specific
negative and positive values, as they may vary between backends).
[ChangeLog][QtCore][QCollator] Added support for collation in the C
locale, albeit this is only well-defined for ASCII. Collation sort
keys remain unsupported on Darwin.
Fixes: QTBUG-58621
Change-Id: I327010d90f09bd1b1816f5590cb124e3d423e61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecate the QTreeWidget functions is/setFirstItemColumnSpanned() to
stay in sync with the other deprecated functions
(selected/expanded/hidden) so they can get removed in Qt6.
Also add a small unit test for them.
Change-Id: Ie1cb5d7163c2d56d653c21e841ccaf7d38569787
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This update is used to free the dependencies of the specific Ubuntu
packages. It ensures that test server is using the latest version of the
Ubuntu packages to test network changes.
Change-Id: I3257f435e6da02e3c6d5a141ece9c5d025e13065
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
All types that can be trivially copied and destructed are by definition
relocatable, and we should apply those semantics when moving them in
memory.
Types that are trivial, are by definition not complex and should be
treated as such.
[ChangeLog][QtCore] Qt Containers and meta type system now use C++11
type traits (std::is_trivial, std::is_trivially_copyable and
std::is_trivially_destructible) to detect the class of a type not
explicitly set by Q_DECLARE_TYPEINFO. (Q_DECLARE_TYPEINFO is still
needed for QList.)
Done-with: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iebb87ece425ea919e86169d06cd509c54a074282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QUrlQuery] QUrlQuery now provides an
initializer list constructor. It can be created using a list of
key/value pairs.
Fixes: QTBUG-68645
Change-Id: Ief5939aa477718f6dd3580f2c60f95ff3aa892ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the widget to which the scroller was assigned is deleted, the
QScroller ought to be deleted too, to avoid filtering events and then
following a dangling pointer while trying to react.
Fixes: QTBUG-71232
Change-Id: I62680df8d84fb630df1bd8c482df099989457542
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Robert Griebl <robert.griebl@pelagicore.com>
Verify that it does cut in after the specified time has elapsed.
Task-number: QTPM-1385
Change-Id: Ib18e8d6af28339f79cca4d62b869287ce07b8cc1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Match the environment tst_selftests.cpp uses for subtests more
faithfully. Extends b22e50acda. In the process, tweak how crashers
are handling, in preparation for the watchdog test.
Change-Id: I09a046460f6f3bff0b12069fad6c1437d89572ce
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
One test for bad data for the column, another for a bad QFETCH.
Incidentally extend blacklist testing by blacklisting them.
Reorganise a QEMU condition that needed extended as part of this.
Task-number: QTPM-1385
Change-Id: Iac72ada19760321c5c9264ddfff7740d1fdd0700
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Currently, a tile rearrange will move the active subwindow (if any)
to position zero (top-left). This ignores any tiling order set via
setActivationOrder(). This change removes this move so that the set
tiling order is respected when a tile operation is performed.
Fixes: QTBUG-43356
Change-Id: I2c481f0ffe45e42e811c6b6d476eb4cb65aa5d1f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch introduces a private 'API' to enable server-side OCSP responses
and implements a simple OCSP responder, tests OCSP status on a client
side (the test is pretty basic, but for now should suffice).
Change-Id: I4c6cacd4a1b949dd0ef5e6b59322fb0967d02120
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QListWidget::(is|set)Item(Selected|Hidden)() are deprecated for a long
time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I4567e740f1ebb5841b2e5b50c601fb83a782950c
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QMdiAreaPrivate::resizeToMinimumTileSize() does not take into account
scroll bars when calculating the minimum size for the QMdiArea widget.
As a result, if scroll bars are enabled or showing during a tiling
operation, the top-level widget incorrectly expands in size (instead of
utilizing the scroll bars). Therefore, we should only resize the
top-level widget if scroll bars are disabled.
Fixes: QTBUG-40821
Change-Id: I3a8b7582d23fdf12d2b09f3740eea6b60bb395c3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To unlock dev branch, we need to disable the Docker-based test server on
Linux for short-term. With this change, we can force update the SHA-1 of
docker images in both qt5 and qtbase. During this transitional period,
the Linux platform should keep using the remote test server.
Change-Id: I4c07abf36154382e5d667ca733901b6d7fda9677
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The tests of QNetworkReply keep failing due to VT-x is not available in
Coin environment. The VT-x/AMD-v feature is necessary when starting the
virtual machines. Before VT-X is added back to the CPU features, the
macOS platform should keep using the remote test server.
Task-number: QTQAINFRA-2288
Change-Id: Ib37d0e7a5fb1fb4ed5484f925f5023b19467e672
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
::link() is defined in unistd.h, so include it.
Change-Id: I58e99dbcdd64da6388f85d98e73e7d1bd56f4e37
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Adds a test case for 199f9c5448.
Task-number: QTBUG-59310
Change-Id: Iee26f8bc21884da36471935f64524b62c3f79ff4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Certain fonts with multiple styles have the same family name. When
loading these as application fonts we were not specific enough when
querying for the text metrics. This meant that e.g. the bold version in
a font family would get the metrics of the regular one.
Fixes: QTBUG-67273
Change-Id: Ic988d62cddde0a1f77ddcaf2891cadc21c9b31e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
You cannot manipulate variables in custom target dependencies, so the
following code was invalid:
i386_d.depends = EXPORT_VALID_ARCHS=i386
In order to still build the fat binary, we split the project in four,
one for each architecture, plus one to create the final package.
Change-Id: If08cf54e2e4098a7e10df41b7ea8d2bf699f58be
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a focus frame is set around a widget that exist inside a
QAbstractItemView, both the focus frame and the widget will
be scrolled when the table is scrolled (since the focus frame
is a child of the view). The result is that after the widget
has been scrolled (which will move the focus frame to the
correct position as well), the focus frame will be scrolled
next, and therefore away from the widget.
This patch will catch this case by always adjusting the
focus frame position when someone tries to move it. Trying
to move the focus frame away from the widget it tracks
will anyway be flaky.
Fixes: QTBUG-63877
Change-Id: Ic2aacc4fafc219280e32092c258a7539d0db9cd0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It would crash if there is no screen at 0,0.
Change-Id: Ic84d75b3d8b917fe3696530cbe843e82923ba676
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The previous implementation leads to infinite chain of showing/hidden
line edit under circumstances described in QTBUG-54676. We basically got
the situation when size hint were calculated differently depending on
the line edit visibility state. In this case toolbar layout have to
show/hide extension button and line edit a lot of times and can never
leave this "loop" (please note, that the chain is much more complicated
in reality):
Resize toolbar -> Set layout geometry -> Size is OK to display line edit
-> Set layout geometry -> Hide extension button -> Set layout geometry
(wrong size is calculated here, so "run out of space") -> Hide line edit
-> Set layout geometry -> Show extension button -> Set layout geometry -
> Size is OK to display line edit ... And we're in the "loop"
Clear button is hidden if there is no text in a line edit.
In the previous implementation, the button was always visible, only
opacity was changing in order to "hide" the button. It resulted to
incorrect size hints (regular and minimum).
In the current implementation the button is really hidden/shown, and
size hints calculated correctly.
Also updated unit test for line edit.
Remove code duplication in functions for calculation text margin
Fixes: QTBUG-54676
Change-Id: I4549c9ea98e10b750ba855a07037f6392276358b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
This will be the only options for Qt 6, so make sure the code compiles now.
Change-Id: I23f791d1efcbd0bd33805bb4563d40460954db43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary to provide details for the key too,
when the server is using DHE-RSA-AESxxx-SHAxxx.
Amends 7f77dc84fb.
Change-Id: I8ab15b6987c17c857f54bc368df3c6c1818f428c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
keyboardInputInterval() is 400ms by default which slows down the
testcase without a good reason.
Set it to 100ms which speeds up the testcase from 20s to 10s on my
system.
Change-Id: Ib883c5d3f09f8e896ae56a8fc8df2233be63de01
Reviewed-by: David Faure <david.faure@kdab.com>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QGraphicsProxyWidget::setWidget() is checking if the newly assigned
widget is already assigned to a child proxy widget without checking if
the child has a widget assigned at all which lead to a nullptr reference
if it is not the case.
Therefore check if the assigned widget is a valid pointer.
Fixes: QTBUG-15442
Change-Id: I006877f99895ca01975bdcad071cfcf90bea22ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
