Takes the total time for this test from ~1.2 seconds to ~0.42 seconds for me.
Change-Id: I426e600a7afe01d7343108b432eda8b83d6f3d85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This takes 300ms off the total time for this test.
Change-Id: I230b8a58315797a81579f6a07da282b0dc40637d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Time taken by this testcase reduced from 7 seconds to 5.1 seconds for me.
Change-Id: I93b1c5fbc7d9d6515c9ce51a64fdd5c2ffbd54c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Followup to da9e02eb83:
If the stylus is a Wacom Art Pen for example, the regular_widgets
test will show a rotated ellipse with size proportional to pressure
for each tablet point, instead of a circle.
Task-number: QTBUG-39458
Change-Id: I4bbb5f8ceabf7006928d95df3ecd62378394f085
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
So when they fail it's easier to figure out why.
Change-Id: I7e76a6e0b8076ede30a6bb9049a031063c569dfc
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This takes the total runtime of tst_qlistview for me from ~47 seconds to ~10
seconds.
Change-Id: Ie6fe95fe0852c2de37e99c2ad02230de78e0995e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
In cases where a cached ftp connection fails to connect, or a file
transfer has failed, we should removed the cached connection. Since qnam
has an idea of a single internal QFtp per full operation, when file
transfers failed previously the cached connection would be reused for
subsequent connections and thus fail.
[ChangeLog][QtNetwork][QNetworkAccessManager] QNetworkAccessManager now
properly handles FTP transfer failures by removing failed cached ftp
connections.
Task-number: QTBUG-40797
Change-Id: Ie090a39ceddd7e58a0d8baf7d01f2a08c70162e5
Reviewed-by: Richard J. Moore <rich@kde.org>
This allows for opening of public key files. It does not, however,
support opening private keys (or decrypting/encrypting them). This is
due to limitations in the native API.
Nearly all public key tests pass (the native API doesn't support the
40-bit key in the test set). The private key tests are expected to fail.
Task-number: QTBUG-40688
Change-Id: Id8f2f1ae6526540736ceb2e5371f6a5d80c4ba7b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
If we write to a file, its size changes. We should drop previous size
caches.
Change-Id: Ib687c91e5fc88cab588c89023f23da9622160da9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Allows to retrieve information about mounted volumes such as label,
total/available size, filesystem type and so on.
Possible use cases are:
- allows to do checks about filesystem before performing actual
operation (such as available/maximum volume size)
- allows to retrive information about volume that can be shown in file
dialogs
- allows to retrieve volume for specific path and check if two or more
paths belong to the same volume or not
[ChangeLog][QtCore] Added QStorageInfo class to retrive information
about mounted volumes and drives
Change-Id: Ibf9c2e6b53ef39c5605894a4422acdbbca4030c4
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
WinRT stores settings inside the app bundle, not in the registry.
Some tests are not fully functional due to errors in the file
implementation (See QTBUG-40588).
QSettings::SystemScope translates to a roaming container on WinRT,
meaning that settings stored inside there should be uploaded and
shared among devices. However, this is untested so far.
The tests have been updated for those platforms which do not store
the order of keys. This has been done on some locations only so
far, but needed to be done on more places for WinRT.
Task-number: QTBUG-33498
Change-Id: Ifd0194387b09c220d31812b4b6fd0ce9a7d84d24
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Make the functions work consistently. For example asking for the line at
the cursor position when the cursor was at the end returned an empty
line before.
Task-number: QTBUG-38500
Change-Id: I60fc78c7be129a59c83efcfce6d8fdd16f2c3f65
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
QExposeEvent::region() reports a region in a random coordinate system.
The behavior is undocumented and the platform plugins do different things.
xcb, offscreen and ios are correct. These set the region in local coordinates,
which is the most logical interpretation of the expose region.
windows is almost correct, except for one occurrence.
cocoa and others need changes: passing in geometry() as the exposed region is
always wrong.
The patch documents the expected behavior both for QExposeEvent and
internally in QWindowSystemInterface. The problematic plugins are fixed to
use local coordinates.
Task-number: QTBUG-40470
Change-Id: I6ded3154d14254fa71d4292d8e1b5e6cf696c81a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Fix disconnection from pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
Commit 9cc106d9d7 fixed connect, so apply
the same fix in disconnect
[ChangeLog][QtCore][QObject] Fixed disconnecting from pointer to member
signal that belongs in the base class but whose type is explicitly given
as a pointer to a member in the derived class
Task-number: QTBUG-40638
Change-Id: Ia546fc8f36e1ea0dd0645bdd820aea47f43677ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The comparison, Latin 1 and UTF-8 benchmarks contained in this file are
stale. The implementation changed in Qt 5.3 and this benchmark couldn't
be updated (test data too large for Qt).
Please contact Thiago Macieira to obtain the benchmarks and test data.
Change-Id: I48c19b1f1711eb73c953a30ed4da510e97a62472
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds tests for ref-qualified member functions, the new
syntax for functions and decltype.
__PRETTY_FUNCTION__ for lambdas varies wildly between compilers and will
produce really bizarre results after cleanup. It's not tested and is
known to be broken.
Change-Id: I70c8dbcba54790357cecba35aa45c5cc672f29d1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On templates, adding constexpr makes a given instantiation constexpr
if it can be.
This turns qMakePair(0,0), say, into a compile-time constant.
The effects on existing code are small, but exist:
$ size lib/*{-baseline,-paircexp} | sort -nr
6516727 211192 2608 6730527 66b31f lib/libQt5Widgets.so.5.4.0-baseline
6516711 211192 2608 6730511 66b30f lib/libQt5Widgets.so.5.4.0-paircexp
5373720 44492 15976 5434188 52eb4c lib/libQt5Core.so.5.4.0-baseline
5373504 44492 15976 5433972 52ea74 lib/libQt5Core.so.5.4.0-paircexp
5107206 125072 6080 5238358 4fee56 lib/libQt5Gui.so.5.4.0-baseline
5107030 125072 6080 5238182 4feda6 lib/libQt5Gui.so.5.4.0-paircexp
1341290 30180 2600 1374070 14f776 lib/libQt5Network.so.5.4.0-baseline
1341210 30180 2600 1373990 14f726 lib/libQt5Network.so.5.4.0-paircexp
# no other libraries benefit
[ChangeLog][QtCore][QPair] Can now be used in C++11 constexpr contexts.
Change-Id: I3872e6aa33a7d02a168516f4dfa7119efcac8c40
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
and make QByteArrayList be a simple typedef.
As a side-effect, the constructor taking a QByteArray is no longer
available since I couldn't find a way to add it to QList<T> when T is
QByteArray. My template-foo failed me. I tried:
- QEnableIf<is_same<T, QByteArray>::value, QByteArray>::type
=> makes QList fail to compile for any T that isn't QByteArray
- make the constructor a template member
=> it compiles if the parameter is a QByteArray, but not a const
char[4] like the test was
- inheriting constructors
=> runs into ICC and Clang bugs that I could not work around
Besides, the constructor with std::initializer_list is a superior
solution anyway.
Change-Id: Ic86fbadc1104142bfd907a5c4147199bf839fb89
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Instead of abusing inheritance to provide convenience constructors,
use simple inline constructor functions. The name got a lower-case
q to indicate a free function. The usual fromXYZ() static methods
were deemed not fitting in this case in the initial round of review,
since they implied some kind of conversion while these functions are
simply constructors of formsts, which contain no data.
This also solves the problem that some of these ctors could have been
called with just one argument and were therefore candidates for hidden
QPixelFormat temporary injection.
QPixelFormatRgb was renamed to qPixelFormatRgba to explain the third
argument at the call site better.
There seem to be no users of this class in qt5.git at this time.
Change-Id: Ib4fe8ceb2d30744127b116a748724a3406400eb8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I503af58f125d7f44fef10360177490c933e5840f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class provides compare operators, stream operators, and hashing
functions. This class aims to be compatible with (but not restricted to)
the Semantic Versioning 2.0 standard (semver.org).
[ChangeLog][QtCore] Added QVersionNumber class
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I244c8ccc002909af03987a2df052734d1a8621a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
clang warning: adding 'int' to a string does not append to the string
Change-Id: I6dc393269a52e9482fde106c17132336cf5ce226
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
In some language, mnemonics put after label text within parentheses.
e.g. "&Open" is translated to "開く(&O)" in Japanese.
OS X doesn't use mnemonics and '&' in label text is removed.
Mnemonics in parentheses (and spaces before them) also should be removed.
Change-Id: I88c0a1f60af7e148b3cf24a4e215ce807d62bce3
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
QOpenGLBuffer::map() and related helpers are becoming useless in
OpenGL ES 3.0 and up: instead of the old GL_OES_map_buffer,
glMapBufferRange, but not glMapBuffer, is now part of the standard.
On desktop GL_ARB_map_buffer_range is present by default in OpenGL 3.0
and newer.
[ChangeLog][QtGui] Added QOpenGLBuffer::mapBufferRange().
Task-number: QTBUG-38168
Change-Id: I4e9bbe8ced9ee4d535ac32849a8c08c26d79cb49
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Add defaultFormat() and setDefaultFormat() statics to QSurfaceFormat.
These define the default values for the requestedFormat members of
QOpenGLContext, QWindow and QOpenGLWidget (and implicitly QOpenGLWindow,
QQuickWindow, etc.)
This replaces QQuickWindow::setDefaultFormat() which can now be removed.
The main inspiration here is not the convenience (avoiding setFormat() calls
for all windows/widgets), but robustness: by setting the format once at the start
of the application, all windows and contexts, including the internal share context
used by QOpenGLWidget and QQuickWidget, will use the same format, eliminating
the possibility of failing due to trying to share between incompatible contexts.
Furthermore, since such a functionality is anyway mandatory for QQuickWindow
(due to the possibility of creating windows from QML code), extending it to
QSurfaceFormat and QOpenGLContext/QWindow is the next logical step.
Change-Id: Ie94486adc489d17fecfcebb7050fecedffd2688b
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This is helpful to e.g. test an NTLM proxy.
The test server currently does not support NTLM; this test offers a
possibility to specify a proxy server via environment variables.
Change-Id: Iea94656d38424c1d932fc854d13ca15ca47cdd68
Reviewed-by: Richard J. Moore <rich@kde.org>
With SHA1 47b3ecf3f4 some tests got
commented out by accident. This re-enables those tests.
Change-Id: If9c7d8a672b66086895a0383fe87d3101fb146fb
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The goal of this commit to make the code in the test work:
QCommandLineParser parser;
parser.addOptions({
{ "a", "The A option." },
{ { "v", "verbose" }, "The verbose option." },
{ { "i", "infile" }, "The input file.", "value" },
});
For this, QCommandLineParser needs a version of addOption that can
take a list of options. That's what addOptions() is for.
More importantly, the QCommandLineOption ctors mustn't be explicit.
OTOH, any implicit conversion from QString or QStringList to
QCommandLineOption is also undesirable.
To solve this dilemma, add new QCommandLineOption ctors that just
take one argument and are explicit, and make the existing ctors
implicit. In order to avoid ambiguities, remove the default values
of their resp. 2nd arguments. The new ctors are by intention not
\since 5.4, as they are completely transparent to the user.
Et voila, even better than getopt_long(3).
[ChangeLog][QtCore][QCommandLineParser] Added addOptions() method.
Change-Id: I5e779f3406cd0f6c8ec6ecbf6c8074af226de300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "adoption" code is taken from setLabel().
Task-number: QTBUG-40503
Change-Id: Id512b28eb756b4a80e5701e599e2cbdf5346ff62
Reviewed-by: David Faure <david.faure@kdab.com>
It isn't a thorough check of all the mutable methods for detaching, but a start.
Change-Id: I523fd30d3459186654e12fd25c384ed990ab7a00
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
As with many other implicitly shared classes, efficient move semantics
requires setting the d-pointer to nullptr, which then needs to be checked
for in the dtor and the copy assignment operator.
Change-Id: I654d181a1dfdd9a16e2f9fb96b57475cdd0b4561
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit reverts c4cef6fae9.
The above fix for QTBUG-25958 (cloned in QTBUG-40219) is not
complete and introduces the regression QTBUG-30049.
Task-number: QTBUG-30049, QTBUG-25958, QTBUG-40219
Change-Id: I3c4b774dce06c13cb4e089f8413a7747cedfd212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Read data into local variables and apply only after a check.
Task-number: QTBUG-40462
Change-Id: Id06060d0d5b0eafc2d303526a86d552ff5747a72
Reviewed-by: David Faure <david.faure@kdab.com>
This is the second and last part of the forward-port of
https://qt.gitorious.org/qt/qt/merge_requests/1281
[ChangeLog][QtConcurrent] run() now optionally takes as its first argument
the QThreadPool to run the task on.
Task-number: QTBUG-17220
Change-Id: I4b46eca6ef7de9cd34dac07e6d4b8ad830426b97
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Background:
It is often necessary/advisable to schedule tasks on thread pools !=
globalInstance(). As Herb Sutter writes in
http://www.drdobbs.com/parallel/use-thread-pools-correctly-keep-tasks-sh/216500409
and the Qt Training Material stresses, tasks you schedule on a (global)
thread pool should be non-blocking, which currently rules out using any of
the QtConcurrent functions for, say, file I/O.
Nonetheless it's often convenient to have thread pools also for file I/O, as
the thumbnail viewer exercise in the Qt Training Material shows. In this
case, you'd use a dedicated thead pool, leaving the global thread pool for
CPU-bound tasks.
Yet, none of the QtConcurrent functions allow to pick the QThreadPool
instance on which to schedule the work created with them.
This patch prepares for them to do so.
This is the first part of the forward-port of
https://qt.gitorious.org/qt/qt/merge_requests/1281.
Implement by using a new QThreadPool* member that defaults to nullptr,
and adding setThreadPool to set this member, then using it in lieu of
QThreadPool::globalInstance() everywhere.
I chose to leave m_pool == nullptr to mean globalInstance() to avoid
creating the global instance whenever a QFuture is created, even if the
future represents the result of a calculation not run on the global thread
pool.
[ChangeLog][QtCore][QFuture] Can now be used with any QThreadPool, not
just globalInstance().
Task-number: QTBUG-17220
Change-Id: I4e1dc18d55cf60141b2fa3d14e2d44a3e9e74858
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a test that checks that QHash keeps the first of the keys
that compare equal. This may or may not be documented, but is
inconsistent with the values in a QHash, where the last element
with equal key is kept.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_map).
Do the equivalent checks in tst_QMap, too. There, of course,
instead of equal keys, check equivalent ones.
Change-Id: I2c5f04f8e8a6bbc7dbaadadd878a4c876e4df042
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A simple convenience class providing a QWindow that has a
paintEvent and supports opening a painter on itself. It
behaves exactly like QOpenGLWindow in this respect, which is not
surprising since they share the same base class (QPaintDeviceWindow).
QRasterWindow does not however have any OpenGL dependencies and will
be present in -no-opengl builds too.
[ChangeLog] Added QRasterWindow, a thin convenience wrapper for a
QWindow on which a QPainter can be opened.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Change-Id: I37e82720492945d7b85d5f713eea8d5f7556e511
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
[ChangeLog] Added QOpenGLWindow. This serves as a convenience class for
creating windows showing OpenGL content via an API similar to QGLWidget
and without any widget dependencies.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Task-number: QTBUG-36899
Change-Id: I52e9bc61acb129dbfd3841b3adeffab2dbcf7f05
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This library was created as a work around for limitations on Windows
Phone 8.0, which will not be supported going forward (Qt 5.4). Therefore,
we no longer need (or want to maintain) this experimental feature and
should remove it from the repository.
Change-Id: Ia417833f9de43e2d3e0940df93625e7d87a555ea
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add a test that checks that QSet keeps the first of the elements
that have equal value. This is documented, but inconsistent with
values in a QHash, which keeps the last element with equal key.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_set).
Change-Id: I4ca1718bb86599b925b3ccd13b0856917cd4ce67
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This is in preparation of rewriting the function for efficiency.
Change-Id: Id5c16b984b95d76e1f26d862e3813f75980f44fb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QImage::invertPixels may produce invalid data after inversions of
images with premultiplied alpha, because the inverted colors will be
larger than the alpha.
This patch converts any image with a premultiplied alpha channel to
ARGB32 before inverting the pixels, and then back to the original
format after the inversion.
Support is added for correct inversion of RGBA8888 and RGB30 formats.
Task-number: QTBUG-39901
Change-Id: Ief24c55f495e67ef2ad6429b5b418d02963a64dd
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Use sizes relative to the test widget size; move windows relative
to the top left point of the available screen geometry. Set a window
title on widgets to be able to identify them. The test now
passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: I5df9198e390befeb3ca18796e24180135a084aad
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Use sizes relative to the test window size; move windows relative
to the top left point of the available screen geometry.
The test now passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: Ia8d992f2a9bfa1cb1deacaf918ed0cfff7616959
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
- Show which button was pressed or released
- Render an ellipse proportional to pressure for each point drawn
- Different color for the eraser
- More complete output for each event
- Don't show mouse events by default, just as most tablet applications
can now ignore mouse events on the drawing canvas. But for the
purpose of testing interleaving of tablet and mouse events,
one can give the argument --mouse when starting this program
to show them too, as before.
Task-number: QTBUG-39458
Change-Id: I5e03f1aa748be39d524bd6984ff5d66579787cf9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The functions can be used to optimize code that do not need to use
the split results as QString directly.
[ChangeLog][QtCore] QString can now split a string to a list of
QStringRef.
Change-Id: Ic2dc929e1fba82f9a060e37c51068a301cb5b866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It is documented to be, and the LanguageChange event is caught and processed.
However, retranslateStrings() uses QProgressDialog::setCancelButtonText(),
which unconditionally sets useDefaultCancelText=true, blocking any further
changes to the button text by subsequent LanguageChange events.
The fix is to use extracted QProgressDialogPrivate::setCancelButtonText()
which - quite intentionally - doesn't set useDefaultCancelText.
Task-number: QTBUG-40504
Change-Id: I6e701deda10c454cb088c0b0778ac2d6adff574a
Reviewed-by: David Faure <david.faure@kdab.com>
The associated test has unearthed that setBar() fails to make the new bar a child
of the progress dialog. This will be fixed in a separate commit.
Task-number: QTBUG-40502
Change-Id: I2d09ebb07ae6395449a4efe38a638df831eebdd7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
On Linux for example Orca gets confused when showing a dialog that is a
child of another widget since it would show up twice in the hierarchy.
Task-number: QTBUG-39444
Change-Id: I84773ecc3d6774a652dbeb29ad201779f5b3191c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This patch adds support for binding RGB30 images as textures, and as
internal format of framebuffer objects. Together with the
QOpenGLPaintDevice
this provides support for rendering to and from RGB30 in full precision.
[ChangeLog][QtGui][QOpenGLFramebufferObject] Support 10-bit per color
channels formats as the internal framebuffer format, making it possible
to render in that precision.
Change-Id: I06de2d12dfe1c1adc466d574fdffbc77f88f4f16
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
[ChangeLog][QtCore][QByteArray] Fixed a bug that would cause QByteArray
to stop converting toUpper or toLower at the first embedded null
character.
Change-Id: Ia369037206617813d86a8f1489589243c82aa51b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the built-in hex, showbase manipulator to format the number in
hex. Also, apply nospace() only once.
Change-Id: Id4b3d5f082ad13f52c8711408d7ec609bec3a621
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Export the former qMessageFormatString() as qFormatLogMessage(). This
allows custom message handlers to format their messages just like the
default message handler, taking qSetMessagePattern() /
QT_MESSAGE_PATTERN into account.
The method should arguably not add the '\n' at the end, which a follow
up commit will fix.
Change-Id: Ib2a9cfda91473df079daf03bf3197e6ac63e013e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
all else being equal, items with a higher numerical priority will appear
first in the result.
Change-Id: I4ee37ff404a53c4152a1e4fc2fc3c23ef525234d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It allows to create a QJsonObject instance in C++ by using
initializer list of pairs QString QJsonValue, for example:
QJsonObject o = {{"property1", 1}, {"property2", 2}};
[ChangeLog][QtCore][QtJson] QJsonObject now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: I67af881e175f427e563e685336c48a5f8466b476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce function QMdiSubWindowPrivate::storeFocusWidget()
to store focus widget and call this when de-activating a
sub window. Change restoreFocus() to return a bool and call
it from QMdiSubWindowPrivate::setActive().
Task-number: QTBUG-38378
Change-Id: I18dbe66ce85213ca5b4907b5a09126544415351a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This function has been inlined in commit 4f50be8d,
but wasn't removed.
Change-Id: I1a4eb7399ab2dd87a9fb15c4c886004d777487a8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
On supported platform, allow to show a backtrace by using
%{backtrace} or %{backtrace depth=N separator="|"}
[ChangeLog][QtCore][Logging] QT_MESSAGE_PATTERN can include a
backtrace using %{backtrace}
Change-Id: Ib00418c070d3bd6fe846dc04bf69fa91ba64f9cd
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
If the test fails here, output the values actually used in comparison.
Change-Id: Ie4ed5ebdf1951c02b89a9648aee50a99d0bb0628
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cost of a type lookup for core built-in types is really small, just few
cpu instructions, but the benchmark was testing create() and destroy()
functions (in a different fashion) which by definition allocate and
de-allocate memory. These memory operations are significantly more
expensive which obfuscate the results.
Change-Id: I33c679f57e6c2b57e98328f076dfe249ab7bcde8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more useful than the URL "file:", it allows to use
"empty path" and "empty URL" for the same meaning (e.g. not set).
QFileDialog actually uses "file:" though, as the URL for the
"My Computer" item in the sidebar. This patch preserves that.
[ChangeLog][QtCore][QUrl] QUrl::fromLocalFile now returns an empty URL
if the input string is empty.
Change-Id: Ib5ce1a3cdf5f229368e5bcd83c62c1d1ac9f8a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "rbit" instruction requires ARMv6T2 or higher. This was found in the
CI when building the imx6 target:
Compiler: arm-poky-linux-gnueabi-g++
Flags: -mfloat-abi=hard -mfpu=neon
Errors from the assembler:
{standard input}:3078: Error: selected processor does not support ARM mode `rbit r3,r3'
{standard input}:7341: Error: selected processor does not support ARM mode `rbit ip,ip'
That compiler defaults to ARMv5T. That's obviously wrong for an i.MX 6,
which is a Cortex-A9 (ARMv7), but the correction applies for older
processors.
Change-Id: I56c276fa411977dd7cd867d62adf021e4909302c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
QJsonValue, while comparing two QJsonArrays, should consult also length
of the arrays, because a different than null base pointer doesn't mean
that an array is not empty.
Change-Id: If76739355a4e74b842e836289565f98d95c006d5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QJsonValue, while comparing two QJsonObjects, should consult also length
of the objects, because a different than null base pointer doesn't mean
that an object is not empty.
Change-Id: Ibee1849ef9fed15d32f2c8f2aad9b053846e46b7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before this change such code:
QJsonObject o;
o["blah"];
would create property "blah" and assign null value to it, while
this code:
const QJsonObject o;
o["blah"];
would not. The change unifies the confusing behavior. Now reading
a non-existing property, is not causing a property to be added
in any visible way.
Internally QJsonObject stores a special hash of undefined, but
referenced values. Such reference is supposed to not live long,
only to the first compacting or assignment.
Change-Id: Ib022acf74ff49bad88d45d65d7093c4281d468f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The operator should always return an undefined values for an empty
object
Change-Id: Ic38f7660d77c64b2d001967bc5109df4185db74a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix tests widgets leaking widgets and ensure it stays
that way by adding a check to cleanup().
Task-number: QTBUG-38858
Change-Id: I77a81d823c68cf0b4e51c2da55b1c473d6e4170b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Change-Id: I815fce7e4dbe76e21cac29beb1dbfc1083191d24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: I4f7d1228f2b90a904b6c3f99e54afcd9970b723e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: Ia284d093cd0029432372630e81657fb687b9516f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes high CPU load for upload devices that don't generate
a constant stream of data. Their readData() function was called all the
time without returning actual data.
This was noticed when implementing an upload device that emits data in
a limited way for bandwidth limiting.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fixed high CPU load when handling
POST/upload QIODevice that generates data on readyRead().
Change-Id: Iefbcb1a21d8aedef1eb11761232dd16a049018dc
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtWidgets][QLineEdit] The signal textEdited() is now
emitted when the user clicks the clear button created by
setClearButtonEnabled() as well.
Task-number: QTBUG-40287
Change-Id: Iacd303ffd1533f27cfa68a6120cdd370e3d31ddc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRingBuffer is a fully inlined class used in many I/O classes.
So, it must be as fast and small as possible. To this end, a lot of
unnecessary special cases were replaced by generic structures.
Change-Id: Ic189ced3b200924da158ce511d69d324337d01b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Otherwise, when interrupting the test half-way (e.g. in gdb),
the user's ~/.config/QtProject.conf would be modified.
Change-Id: Id582c4a3fbf0acbed460126fccf0d39b3a09758a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
They shouldn't exist in the first place. They exist in two cases only:
1) mistake by the user in the QLibrary or QPluginLoader constructors or
setFileName
2) as a kludge for setLoadHints before a file name is set (we need to
store the user's requested hints somewhere)
This is important for the second case, as otherwise all QLibrary and
QPluginLoader objects without a file name would share the setting.
Task-number: QTBUG-39642
Change-Id: Iebff0252fd4d95a1d54caf338d4e2fff4de3b189
Reviewed-by: David Faure <david.faure@kdab.com>
This commit makes replaces the loadHints member with a setter, a getter
and an atomic variable. The setter will not set anything if the library
has already been loaded.
Task-number: QTBUG-39642
Change-Id: Ibb7692f16d80211b52aaf4dc88db1a989738a24d
Reviewed-by: David Faure <david.faure@kdab.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was prompted by https://git.reviewboard.kde.org/r/119221
Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Uninstall option will uninstall the test afer has been executed.
It is useful when you are using your own phone to execute the tests.
Change-Id: I2a3f6c3a93099d70c98f9ce059da22c409b55843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Several tests require test data to be deployed with the
application. The easiest way to achieve this on Android
is to add them to a qrc file and use the QFINDTESTDATA macro
to look up the files. This fixes several test failures
in the gui/text subdirectory for Android.
Change-Id: If944bb1fc93434a1b2d6487da829d21bd6b84e87
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Compile on Windows, add command line options to activate the
various tests.
Task-number: QTBUG-38858
Change-Id: I38c6a9a6711831b2bd8b6ea051dd19615cc911a1
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
When a dialog was parented on a native child widget,
its window handle was used as a transient parent.
This confused QPlatformWindow::initialGeometry() among
other things. Use top level window as is in Qt 4.
Task-number: QTBUG-40195
Change-Id: Ic82adc276175f92adde825fb2551274351e41f30
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
At the moment, there is no stream information in the cache file. This
can lead to a problem when current stream version differs from version
cache file written with.
As an example, if file written with Qt 5.1.1, QTimeDate in the metadata
stored as 13-bytes value, but Qt 5.2 and later can read additional 4
bytes which breaks following data, leading to network request just hangs
forever.
Adding stream version fixes this problem.
As cache format changed, cache version bumped.
Task-number: QTBUG-36219
Change-Id: I467d8c9fda82bcf9302192f51e7a00d2f6a9ff66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This prevents conflicts in case of link time optimizations or
precompiled headers are used since we don't include qglobal.h
in the generated code.
Change-Id: I4266c8ae38e6eafefd28b3bde5cb725a24d67ea0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.
Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Prevent the QGroupBox from changing the enabled state of
dialogs parented on it.
Task-number: QTBUG-40132
Change-Id: I91cc6ccf5ade0b3a491020ed947d4aceca62d7b6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Prevent the splitter from adding them to the layout or showing
them.
Task-number: QTBUG-40132
Change-Id: Ife2be0bbd7e489570ef41f6f72a034b356c65f18
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
It was always constructing a QUrl from the string causing the warning
"Non-native QFileDialog supports only local files" with the
new QUrl-based implementations of getOpenFileUrl(), etc.
Change-Id: Idd9bb432a48865df137f8f39f53014dda150ffe9
Reviewed-by: David Faure <david.faure@kdab.com>
It can happen when the sidebar only has only one item, due to
"My Computer" being missing.
Change-Id: I2b38fef45139f1dfa20d88059e56185c3163a833
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
So that this method is at least called once in the test :)
Change-Id: I3b5fc6b7c464d9e56264c709cfa313d475004207
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
main.cpp(332) : warning C4307: '*' : integral constant overflow
tst_qpainter.cpp(1293) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qpainter.cpp(1474) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qtbench.cpp(155) : warning C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
main.cpp(68) : warning C4189: 'fontHeight' : local variable is initialized but not referenced
Change-Id: If6aadd50df7c5cf7d0f33791c9247730a47ddd27
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Instantiate the timer on the stack to prevent it from
interfering with other tests.
Change-Id: I91ffe23b502fcddaeb6d6d3f89ea3d27b083cdb0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We really do not need to do string parsing there.
Change-Id: Ie2277d9ff0d0445285b7108023941af111d9baca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This revert commit de1d5815c1 which
wrongly fixed a typo. There is no typo because we use startsWith
with that constant.
Also added a test because the %{time} support was added in commit
93563952d0 but the test was missing
Change-Id: Ic96e6f21f989ca3a2905ec6c89b93d2627b77b40
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Broke tst_QMenu::statusTip by closing the menu while it should not. (and therefore, a QTimer::singleShot that fires while following test are running is making the test fail)
This reverts commit 50c04d6318.
Change-Id: Ib4ef8190f945b915fe268745cc64d471994c5e2d
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch aims to implement the session management available on OS X.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Task-number: QTBUG-33034
Change-Id: Icedc8590a1c0934d9bc87d3a43d6702a9903bfb8
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
I've also updated the qfont test so it passes on Android now. Note that
there are no suitable cursive/fantasy fonts on Android, so the regular
default "Roboto" (or "Droid Sans" on older devices) will be picked here
instead.
[ChangeLog][Android] Fixed font selection to prefer "Droid Serif" when
Serif style hint is set on QFont.
Change-Id: I294eebcc4d79410e435bdddce552acc6044753b2
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
At the moment, it's possible to have 2 properties with the same name,
which doesn't make much sense. Notify the user about that so she can
react on it.
Change-Id: I4865b71730921b79ce9dd8abb0cc760b3f1dbfd8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The function gives a warning if an argument doesn't exist.
Change-Id: I6a4bbbaf2fd241ced06dc71edfe4ef69732606d1
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the platform plugin gives us specific fallbacks for a
specific script, we need to respect this, and load the correct
font family regardless of which writing systems it supports.
This is especially important since the common script is adapted
to match surrounding, proper scripts, so characters such as
digits next to e.g. Hebrew text will be marked as Hebrew. On
stock Android, there is a single Hebrew font, and this would
previously be put in all fallback slots for Hebrew regardless of
what fallback fonts were dictated by the platform plugin. Since
this font does not support the digits, they would show up as boxes.
[ChangeLog][Android] Fixed common characters like digits and
punctuation showing as boxes when positioned next to non-latin
scripts.
Task-number: QTBUG-39377
Change-Id: I1555e208a8ddc587c0bbdbfff1600cafdd9442e9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.
This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.
Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This property is used to automatically hide tab bar if it has only one
tab.
Originally-by: Denis Kovalskiy <denimnumber1@gmail.com>
Change-Id: I6967f760010fa55bad6a5986c29abe7ccf625cf8
Reviewed-by: David Faure <david.faure@kdab.com>
The check has to detect if boost header is present in the system we are
building for.
Change-Id: I700a11df208c8852ba094d8bff387ad21fa309b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Check result in initTestData().
Previously, QFINDTESTDATA() was repeatedly invoked in init(). The
data-driven cd() test then failed when invoked stand-alone since
cd_data(), which relies on the data path, is executed before init().
Task-number: QTBUG-40067
Change-Id: I91039247e8dcaedd92fa990f1b5f82bc54b17c60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
At some point since Qt 4.8, the nbsp character has acquired
the whitespace attribute, causing it to be treated exactly
like an ordinary space. To account for this, we add an extra
check in the layout code to avoid breaking on non-breaking
spaces even if they have the whiteSpace flag set.
This is a temporary fix for the regression. The line breaking
algorithm needs to be refactored and support Unicode tr14
properly, which it currently doesn't.
[ChangeLog][Text] Fixed lines breaking on non-breaking spaces.
Task-number: QTBUG-39832
Change-Id: Ibd7e1a11ce4b82c611ecda1542c8638a67bf3cae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This is trickier than the GLX and EGL implementations due to the
way pixel formats, windows and contexts work. Apart from some
restrictions, it should be fully functional nonetheless.
Add also some proper documentation.
Change-Id: Ia6e3eb1ab2701e439b8621b9092c2b0934ff2151
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like for integers, this is activated only on QLocales other than C.
[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.
Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Currently QOpenGLTextureCache::bindTexture always convert any uploaded
image to RGBA8888 before uploading. This is quite inefficient when
OpenGL natively supports uploading formats in the original format.
This patch adds support for uploading a few native QImage formats. This
also get the performance of QOpenGLTextureCache::bindTexture on par with
QGLContext::bindTexture.
The texture brush used by QOpenGLPaintEngine is also converted to QImage,
since bindTexture will convert it to QImage anyway, and going over QPixmap
may cause an unnecessary conversion.
[ChangeLog][QtGui][QOpenGLTextureCache] Support uploading common QImage
formats directly to OpenGL when supported.
Change-Id: I828a763126441a98e4547c32ef52dddf7c129a32
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Adds basic support for 10-bit per color channel formats to QImage
and the XCB plugin. This will make it possible to paint to and from
these formats, but only at 8-bit per color channel accuracy.
This also fixes Qt5 applications on X11 with native 30bit depth.
[ChangeLog][QtGui][QImage] Added support for 10-bit per color channel image formats.
Task-number: QTBUG-25998
Change-Id: I93ccd3c74bfbb0bd94b352476e5fe58a94119e1f
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This is used by Orca for geometric navigation (aka flat review) to move
the focus around. It is also generally sensible to be able to
programatically move the focus around. This way of moving the focus
is redundant with the action interface's focus action.
Task-number: QTBUG-40048
Change-Id: I1b61ea843f6bfc3dc00007772e0e5102555ca752
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
It allows to create a QJsonArray instance in C++ by using
a similar expression to JSON. For example:
QJsonArray a = {1, 2, 4};
[ChangeLog][QtCore][QtJson] QJsonArray now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: Icc352e518d9649d24176c89e7113d200d5c50b0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Support CF_DIBV5 for these images so that transparency is preserved.
Task-number: QTBUG-11463
Change-Id: I51881ae8bfbd05b92abd309766f4da9a7ea26c2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.
Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So far, we had to listen to the QObject::destroyed signal from the QScreen
class to figure out whether a screen was removed. Often, this is already
too late, given that most of the QWindows have been moved by then and we
don't get to react before the windows are being set to the primary screen.
This patch introduces a new signal that will notify about a screen removal
before the screen is started to be destroyed, so that the application gets
to decide what to do with the screens before Qt decides to move things around.
[ChangeLog][QtGui][QGuiApplication] Added QGuiApplication::screenRemoved
signal to inform that a screen has been removed, before Qt reacts to it.
Change-Id: I99304179f4d345cae581a87baac6cff7b8773dea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
There is no guarantee that the OES extension is present and the standard
functions are not required to be dynamically resolvable on ES.
By performing the ARB-style lookup for the suffixless function names we
can also support ES3 compatible contexts on desktop GL.
This also fixes the problem of picking up the APPLE extension functions
instead of ARB when both are available. vaoFuncsType was set to ARB correctly
but the helper has to take the preference of ARB into account too.
Task-number: QTBUG-38168
Change-Id: If7402320e8f96891017674f3c43bc57c4b5d29f3
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The assumption that we can test "en_US" and expect
it to behave a certain way is flawed in that most
of the formatting settings are independently
configurable by the end user.
Make the test more robust while attempting to preserve
as much testing as possible:
Make the decimalPoint/groupSeparator tests check for
a range of possible values. Check that they are not
the same.
Remove the date formatting tests and the firstDayOfWeek()
== Sunday test.
Make the time zone test accept a non zero extended
time zone. ("GMT+2" in addition to "GMT+02".)
Change-Id: Ie1f89793eb785f526c5f6fafbb6726ef8c6cb016
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Fixed qwidget test cases for platforms that show windows full screen by
default and that don't support WindowMasks. Incorporated QNX/BlackBerry
peculiarities.
Change-Id: I349ecab5cef35c7d9751aa547465f685d620164a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This allows QQuickSystemPalette to listen to palette changes without
installing an expensive event filter on the application object.
Change-Id: I8b693e047d993c444e393d7a714a5709692c3560
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.
Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.
Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.
Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
The sockaddr_in struct is defined in netinet/in.h header.
Change-Id: I67a3421094c96a5e948968a26723ec8c21f85c93
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The almostplugin has an unresolved symbol, and on Android
we compile with -no-undefined.
Change-Id: Ia631193890dfe8e7ac8e58087475164222d876fc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It enables you to get a valid QSharedPointer instance to 'this',
when all you have is 'this'.
Task-number: QTBUG-7287
Change-Id: I3ed1c9c4d6b110fe02302312cc3c4a75e9d95a0c
Reviewed-by: Richard J. Moore <rich@kde.org>
Use SetWindowPlacement() to set the normal position when applicable
as is done in Qt 4.
Task-number: QTBUG-39544
Change-Id: Ia158b968ea15361d9937619f07b56eb8a0312a13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This macro is equivalent to arg.toUtf8().constData().
It is usable for "%s" arguments of qDebug(), qWarning(), qFatal(),
qCritical().
Change-Id: I2d9956e6651271e1e2183dce9c835511cf923bf3
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to quickly test if a compiler actually supports what it
claims to support.
Change-Id: Ia32212a11774aa7947ddffae30837c53665374f3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Improve consistency and use QTextDocument functions to find ranges
instead of coming up with our own scheme. This is important since
QCursor's char format depends on block positions.
Change-Id: I94eb137882dc6b5f7b01fa7693b4a536cc48d02a
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
It is needed to control a QStateMachine object from QML.
Change-Id: I19271d97718af2d688c477647d6341f70fdef3ea
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Qtbase contains four identical implementations of next power of two,
these should be shared and the implementation made available to other
qt modules, as it is also used many places outside of qtbase.
[ChangeLog][QtCore][QtMath] Introduced qNextPowerOfTwo methods.
Change-Id: Id23fbe5ad6bae647b30d5a4212c0330e48a50278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add conversion methods similar to those in QString to QByteArray. This
is often more useful than the QString version since std::string like
QByteArray are byte arrays.
[ChangeLog][QtCore][QByteArray] Added convenience methods to convert
directly to and from std::string.
Change-Id: I92c29d4bb1d9e06a667dd9cdd936970e2d272006
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of using std::thread, use the WinRT ThreadPool to manage
threads. This allows for setting the scheduling priority, and provides
a path to enable XAML integration (which requires Qt run on a background
thread).
QThread::terminate() is still unsupported, and only the winmain thread
can be adopted due to the behavior of the thread pool when creating
tasks from the GUI thread. The associated tests are now skipped, and
all other QThread tests pass.
Task-number: QTBUG-31397
Change-Id: Ib512a328412e1dffecdc836bc39de3ccd37afa13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Forward canDropMimeData() and dropMimeData() to the source model.
[ChangeLog][QtCore][QAbstractProxyModel] QAbstractProxyModel now
forwards the drop-related API.
Task-number: QTBUG-39549
Change-Id: Ib81fcec862586e4ecfb99b9e0f4eb1a16eace762
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In "setOpaqueResizeAndMove" this patch makes sure that the content of a subwindow
actually fits into the window, otherwise the resize does not work properly.
The content is dpi dependent and thus the pixel size of it increases with the display
dpi value.
Furthermore when moving the QMdiSubwindow this patch makes sure that we actually grab
the window's header and not one of it's tool buttons (minimize, maximize, close).
Change-Id: I88314994957c5883f57c09c9240a3b83f1ee42ed
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
This allows QQuickApplication to listen to layout direction changes
without installing an expensive event filter on the application object.
Change-Id: I2d7d8906acecbc092657c4bd918bbdc9aad9744c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Fix condition to allow return a valid pointer when head != 0.
Change-Id: I5215f7dfc44924016c2d9b67ab2d9935b5164d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We were keeping a dangling pointer to a non-existent QIODevice around
which would lead to a crash.
Task-number: QTBUG-17400
Change-Id: Ie374cbb94bb45c9b0fbef46287b3317f60154123
Reviewed-by: Richard J. Moore <rich@kde.org>
The local files in availableSizes() were not resolved.
Introduce member variables for the file names, resolve them
in the constructor and add initTestCase() to verify.
Task-number: QTBUG-39287
Change-Id: If841e904700fe76b6c9265124ccba7764911fdc9
Reviewed-by: aavit <eirik.aavitsland@digia.com>
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.
Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
According to the spec rects get returned with iiii but we were directly
serializing QRect resulting in (iiii) as signature.
This would trip up Orca when trying to use flat review in text edits.
Task-number: QTBUG-39702
Change-Id: I8d6769688586e678d27cc4341de5176a91f057fc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QImage::fill(uint) was incorrectly performing ARGB->RGBA conversion when
called on RGBA8888 formated images.
This patch moves the color conversion to QImage::fill(QColor) where it
belongs so that fill(uint) can behave consistent with documentation and
how it treats other formats.
The fill(uint) method had no automated tests, and this patch adds one.
[ChangeLog][QtGui][QImage] QImage::fill(uint) now fills the given pixel
value unconverted when used on RGBA8888 image, making it consistent with
the documentation and treatment of all other image formats.
Change-Id: I00a9d810c61d350dbdd7c4b9ad09e5ce11896b6d
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
If the widget exists in the style rules cache before it polishes for the
first time then it should be removed from styleSheetCache too so that the
latest set stylesheet is used for the polishing.
Task-number: QTBUG-39427
Change-Id: Ic1e7988afe530f16ea9996bae56543ed554d6be9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
