it was introduced as a hack to simplify writing tests, but the change to
make use of it was backed out of testlib and nobody seems to care.
Change-Id: Icc86621b865276e86593afdb923247bbdca19d49
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Currently Qt offers only debug, warning, critical message types for
general use. Most logging frameworks offer more ... let's save
some space for future message types.
Change-Id: Icb4333da5c8f5277fd10d8a01b06d95369662bdc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In QEventDispatcherBlackberry::select(), if an event handler called
through filterEvent() starts a nested event loop by creating a new
QEventLoop, we will recursively enter the select() method again.
However, each time bps_get_event() is called, it destroys the last
event it handed out before returning the next event. We don't want it
to destroy the event that triggered the nested event loop, since there
may still be more handlers that need to get that event, once the
nested event loop is done and control returns to the outer event loop.
So we move an event to a holding channel, which takes ownership of the
event. Putting the event on our own channel allows us to manage when
it is destroyed, keeping it alive until we know we are done with it.
Each recursive call of this function needs to have it's own holding
channel, since a channel is a queue, not a stack.
However, a recursive call into the select() method happens very rarely
compared to the many times this method is called. We don't want to
create a holding channel for each time this method is called, only
when it is called recursively. Thus we have the instance variable
d->holding_channel to use in the common case. We keep track of
recursive calls with d->loop_level. If we are in a recursive call,
then we create a new holding channel for this run.
Change-Id: Ib3584676d2db5a9a3754a1535d5fb6c9e14f5dbb
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
The current NDK uses CPUVARDIR variable to define whether x86 or armle-v7 is used.
Therefore, the whole structure uses these two definitions to separate simulator
and device builds. Renaming blackberry-armv7le-qcc to blackberry-armle-v7-qcc
allows to directly use CPUVARDIR during Qt5 builds.
For compatibility reasons the old folder is kept and includes the new qmake.conf.
Change-Id: Ia7feeeabe16eda48140a65178af28cbb9bd085a9
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
handleStatus() was called with drag==0 when releasing the mouse over the
desktop.
Task-number: QTBUG-33920
Change-Id: I553647d1e734934b7c6caf4c984683cff88f9162
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Got introduced in 9b187bcd6a256b53cc2fb85500
Change-Id: I1d713f8309d3d8568ea836cc1d29f9dca685ac01
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
After Ic12de12ec51c20de52d040514e90be5e783add43 this functionality
was broken. Added an autotest.
Task-number: QTBUG-34159
Change-Id: I8f41b7073dc57fea855ab87796f09e8a91520d13
Reviewed-by: David Faure <david.faure@kdab.com>
The order of "android:value" and "android:name" attributes can be changed when
saving the XML document. Use placeholders instead.
Change-Id: I9a97bb0df2d2d16c8a9443a21ce7d3290e0ab466
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
strings.xml file is used to store strings that can/should be internationalized.
Change-Id: I2fc305b6917752e9f502bd4beb172205ba4f9fba
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The logic here was a bit broken. Every QWindow has an opacity
which is 1 by default so the expose was hit for every single
window, regardless of it being layered or not.
Change-Id: I04873cd5db1cd147708e7de140f5947d3a01e9e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If the text is centered, the x/y position in the selection QRectF may
be a multiple of 0.5 which is rounded up. This rounding causes
misalignment of the selection region with the text.
The alignment is fixed by using qFloor on the x and y components.
Task-number: QTBUG-34218
Task-number: QTBUG-34234
Change-Id: I4f2fadeb38602f62a93773c6e5faecf03b28069f
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Previously, showFullScreen() had a race condition: it depended
on QFbScreen::setGeometry() being called after the window state was
set (that would trigger QPlatformScreen::resizeMaximizedWindows(), which
was the only part of the code that reacted to WindowFullScreen).
On Android this caused random behaviour.
Task-number: QTBUG-33294
Change-Id: I228e6af4139af1a47387e7d80757d7b46e859580
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Don't crash and lock up the whole device when people try to
remove menu items that don't exist.
Task-number: QTBUG-34246
Change-Id: I4396d252c5af93e021c9e218dbab7c0e7f190d9d
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The default link color used to be resolved to the link color of the
application palette, but got lost during the Qt 5 modularization (see
commits 7351a43 and 3f9a7f9).
Task-number: QTBUG-28998
Change-Id: I7f07427f6c03f83c557100938ad9f7a39349d303
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The configure-time procedure used on Windows does not currently
perform the same tests to determine the width of a pointer as are
performed on Unix-based builds.
This causes QT_POINTER_SIZE to be undefined in the generated
qconfig.h file. This in turn breaks compilation of various Qt modules
such as QtDeclarative.
This patch adds the same level of support for automatically
determining the target platform's pointer size, as is currently
offered to Unix users.
Change-Id: I93838c1759b14089ba9f4daf442048fb5c8da738
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's wasteful, given that exactly one add-on module (and most probably
nobody else) needs it.
i'd do the same with yacc and lex, but i suspect this would cause quite
an uproar.
Change-Id: Ic2a6ca19e829393835f824e31cd0893e78c3fd39
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Now that MinGW-w64 fixed the headers the old hack actually break stuff.
Change-Id: I1f60b9176982f6c07e01f3960bc1d7e70d7f9481
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We change the behavior slightly from the initial implementation in
5.1. Forcing the use of native child widgets is causing massive
performance issues so instead, we attach the embedded QWindow directly
to the root window. The only exception is QScrollArea and QMdiArea
which still enforces native windows for the entire parent chain
to make clipping and stacking work.
Task-number: QTBUG-34138
Change-Id: If713637bd4dce630552ace2f8ad6b2e86c063721
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since commit f30641a7 is has been possible to issue more than one host
lookup request per HttpNetworkConnection. If the result was both an
IPv4 and IPv6 address, and we get a second similar DNS reply, we
end up triggering the assert in startNetworkLayerStateLookup().
This patch splits the InProgress state to HostLookupPending and the state
of trying both IPv4 and IPv6. This makes it possible to ignore any new DNS
replies received after the first succesfull one.
Change-Id: I0b8d6b1582fdaed69dde5926019b60bb0cbd580d
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Otherwise, make would upon distclean first remove the xcode
project, then try to do xcodebuild distclean. xcodebuild would
then complain about a missing project.
Change-Id: I0a9a6af6d86d1a95e37f4bbafa38c63d892bf1cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Added/Changed:
- Move content from the Thread Basics overview to the QThread class ref
- Rephrase bits for clarity
- Use more links
Removed:
- (threads-basics.qdoc) Warning against moveToThread(this): This usage
came about when people tried to add slots to a QThread subclass. This
patch adds a warning against the root cause.
- (threads-basics.qdoc) Note on sleep() et al.: They were made public in
Qt 5.0.
- (threads-basics.qdoc) The strategy for managing member variables:
Sounds error-prone. Pushing results through signals is safer.
- (qthread.cpp) The note about GUI classes: Irrelevant to QThread,
and it's already mentioned elsewhere.
Change-Id: I6bc53cc22b929523f9976d2b920f94c02bd7273e
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Fixed issues when having multiple devices connected at the same
time.
- Fixed hard coded paths
- Removed not existing function call, which caused test run to exit
too early.
- Added possibility to add and connect to device, configured as env
variable.
Task-number: QTQAINFRA-641
Change-Id: I8c1e003ce4ffbc9fdd9572dc55eef8fe92330cba
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Try harder to actually return text, before TalkBack would not read the
contents of line edits and other text widgets.
Change-Id: Ibb9bb8ac4a2728674f6f5ccf29eda5ed66a81a34
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The complaining compiler is:
gcc version 4.6.3 (crosstool-NG hg+default-ddc327ebaef2)
Change-Id: Iae488a89d75492e76a39a326b2db36548f8894d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This potentially resolves the long-standing warning from GCC:
assuming signed overflow does not occur when assuming that (X + c) < X
is always false
GCC prints the warning to warn people that you can't check for overflow
with signed integers by doing that (signed integers don't overflow in
the standard).
If we change this to X < X - c, there's no overflow.
Task-number: QTBUG-33314
Change-Id: I5b166610a39559ec7b03c4c31ee5999efefa0c06
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
the variable may contain a complex command, so an exists() check is
doomed to failure if the tool is built dynamically.
also, the check is not really necessary: it failing indicates a bug in
the qt build system, and we don't really need to complicate the code to
deal with such corner cases.
Change-Id: I2e6087dcc6dd4a4f70bdf739550276f364c880dd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the relevant code moved to the windows platform plugin.
Change-Id: I06f2efd1190ee7d1da1f48172ae879e5c06a945f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
if the user knows that no additional imports need to be linked, this
can be used to optimize the build time.
as it happens, it can also be used to fix the build of the qml tools
themselves ...
Change-Id: Id77aea1f20cabdc2e831540c61d8a4b8e85c040b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The handling of the null QPolygonF case was not correct as it would
always be seen as valid. This ensures it is treated in the same way as
QPolygon when it is in fact null.
[ChangeLog][QtGui][QPolygonF] When a QVariant holds a QPolygonF()
then it will be correctly seen as a null QVariant.
Change-Id: Icae34f513c3a8e1dd3f50cb64a3d13ae7c636cc4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This was created for the iOS port and intended to be cross-platform,
but since then they got cold feet and never added the support.
It makes no sense to only support this on Android. We need to
remove it again and hold off until we can find a proper solution.
Editing the AndroidManifest.xml is the non-cross-platform
solution for this.
Task-number: QTBUG-34166
Change-Id: I51d53b82a3412a9016de01612dd8df9ae12c6633
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Allows post-processing code to exclude recursing into host_build subdirs.
The alternative would be to have the SUBDIRS logic pre-parse the subdir
project to check if it's a host_build, but that might have a performance
impact, so it's better to leave the information explicit in the subdir
project file.
Change-Id: I1a6f7d94c49faf5f5106c83ef21f6b85b531c90b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
