Can be used to make smaller binaries, and possibly speed up ARGB32
rendering on some platforms.
Change-Id: I7647b197ba7a6582187cc9736b7e0d752bd5bee5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Initialize the lastDir properly, to avoid the stroking algorithm doing
direction-change handling for a single line. That could cause a cap to
be painted for a single FlatCap line.
Also fixes a bug in tst_qpainter, revealed by the above fix. The
result drawPolyline was erroneously compared to the result of drawing
the lines individually, for a case where the former correctly paints
the pixel of the join point in the corner, while the latter by
coincidence used to paint the same pixel as a cap because of the bug
above.
Task-number: QTBUG-70101
Change-Id: Ie20eda33214cfe9e7627f17ef4c7a5b3835c9c24
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds support for 16bit per color image formats in QImage. This makes it
possible to read and write 16bpc PNGs, and take full advantage of the
16bpc paint engine.
[ChangeLog][QtGui][QImage] QImage now supports 64bit image formats with
16 bits per color channel, compatible with 16bpc PNG or RGBA16 OpenGL
formats.
Task-number: QTBUG-45858
Change-Id: Icd28bd5868a6efcf65cb5bd56031d42941e04099
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The NEON implementation uses rsqrt and thus can not be taken on 0, so
replace the minimum with something close to zero instead of zero.
Task-number: QTBUG-59961
Change-Id: Ia39e45be675b056c1e22900495ce9ba4e8b70e5f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Clipping enabled state would not always be correctly restored for the
raster engine (other engines work fine). The raster engine's QClipData
object is sometimes shared between painter state objects on the
save/restore stack. QClipData has its own enabled flag, and this could
then come out of sync. Fix by making sure we sync the enabled state on
restore.
Task-number: QTBUG-58789
Change-Id: I81e6254ebb93df6e153bbef58e32a885273e3224
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix a number of issues that caused polygons to not always be drawn
fully connected.
Ensures the original lastPixel is set when drawing closed polygons,
ensure we don't round away from the original starting point, and add
handling of edges that need to be rounded half a pixel sideways to line
up with endpoints.
Task-number: QTBUG-27053
Change-Id: Ib51ee5623a629996af51a0967096383f04e91e2f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
... for calculated test data names.
In tst_qimage.cpp, use QLatin1String instead of QString for image
format pretty-printing, to avoid needless memory allocation and, more
importantly in the context of this patch, to make the result usable
with addRow(), which does not support %ls.
Change-Id: Ib1953aee2da235ae912917a450491ac8be69ca3a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The ARGB32PM code-path doesn't have enough precision to accurately
render ARGB32 images, but the RGB64 code-path does. Since this is
already a slow configuration and the most costly part is the conversion
we can switch to the more accurate code-path for little cost.
Task-number: QTBUG-55720
Change-Id: Ifa0afba8d8cc0c2f699bb91f51726f4ee5228f3e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The function was incorrectly handling green and blue color channels
causing them to be dropped. This affects drawing non 32-bit images onto
10-bit per color channels formats such as RGB30.
Change-Id: I9211e253b1a9da0dada5c418d592a8f531265989
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The alpha channel of an RGB32 image was not properly ignored when doing
blending with partial opacity.
Now the alpha value is properly ignored, which is both more correct
and faster. This also makes SSE2 and AVX2 implementations match NEON
which was already doing the right thing (though had dead code for
doing it wrong).
Change-Id: I4613b8d70ed8c2e36ced10baaa7a4a55bd36a940
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also bump minimum required Qt version for Android: Ministro updates.
Conflicts:
src/android/java/src/org/qtproject/qt5/android/bindings/QtActivityLoader.java
src/android/java/src/org/qtproject/qt5/android/bindings/QtLoader.java
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: I966f249bebf92da37bfdeb995ad21b027eb03301
Clip the transformed and rounded sourceClip to the source rectangle,
so we don't try to rotate pixels outside the source.
Task-number: QTBUG-56252
Change-Id: Ib9cb80f9856724118867aea37ead0b02a6c71495
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Fix a mistake introduced recently and revealed by lancelot. Adds an
auto-test for rotations to catch similar errors faster in the future.
Change-Id: I028a160107d98899e723481b6201ef776f20c721
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
and tests.
Task-number: QTBUG-51673
Change-Id: I55f61845c3b54027c467a5c59c122e7d16955358
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
To calculate the real count we need to use the actual fixed point
increment and can not use the floating point value increment wass based
on since it might round differently.
Includes auto-test by Gabriel de Dietrich.
Task-number: QTBUG-50153
Change-Id: Ia973088f361c90370fa20bac14a4b8f373b5d234
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I31adb60bdaf7ea243143a9244b6c4f66f38b189d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
At the edge of the view, a line segment could end up as not producing
any pixels even if not clipped by the floating-point clip
routine. Make sure the starting point for the next line is still
updated correctly for any significant segment lengths.
Change-Id: I381a4efb81ce6006f3da4c67abf279aea79e4663
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Just like from RGB32 to RGB30 we must also repremultiply when converting
from RGB64 because the alpha channel loses more precision than the other
color channels.
Since this is not approximated accurately in the simple blending
functions and the functions are no longer needed now the main render
engine supports higher accuracy, the simple blending routines for RGB30
have been removed.
Change-Id: I2b7b8eb015e330a487848fc4370ad3a1e966be91
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
With two alpha-bits half opacity can not be represented, so we must use
one third (85) instead of half (127).
Change-Id: I2b3f1c983a3034196bf2604840945ad3a81f5b38
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
The tests were trying to access one pixel outside of the image.
Change-Id: Ieabdefbbdb76bb736214a0495bec72c881b27d2c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Adds the last two missing source types to rgb64 rendering.
Conical and radial gradients. At the same time linear
gradients are moved to a template form to increase code
sharing.
Change-Id: I30fdd0837b0da03e3447683856ebbe4d7f48df6c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some tests were failing because the color was not read correctly from
a QImage. To make it possibly to read more accurate colors a pixel
accessor returing QColor has been added.
Some tests also had the wrong order of arguments, confusing dest and src
formats. This has been corrected, so they test what they claim to test.
A test for RGB30 linear gradients is also added.
Change-Id: Ic623ae1b8e0bf7383056b641c6e8230a1d7dd0dd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
