`load(qt_module_config)' clobbers DESTDIR.
Rearrange the order so that our setting of DESTDIR works as intended.
Change-Id: Id6f02e9fb55069fae9b2a75c9d0f51578b84f4d1
Reviewed-on: http://codereview.qt.nokia.com/2130
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
There has been a few reports of user confusion from the fact that the
constData and data functions return results in column-major format.
There is nothing in the doc anywhere that states this, and nothing
states that the class is especially for OpenGL which would give a clue
at least.
Change-Id: I3a9afde0fbeb8b9d2bcba6a387620b60a56774b9
Reviewed-on: http://codereview.qt.nokia.com/2066
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Julian de Bhal <julian.debhal@nokia.com>
Check if the input method removes the selection and force emit
selectionChanged if it sets a new selection.
Task-number: QTBUG-19727
Reviewed-by: Martin Jones
Change-Id: Ic8ea1044d0917aac4e52368f431ac9e5c7db7c56
Reviewed-on: http://codereview.qt.nokia.com/2076
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
A reversed selection will have the same resolved start and end
positions but a different cursor position so testing the end points
alone doesn't guarantee the selection is the same.
Task-number: QTBUG-19456
Reviewed-by: Martin Jones
Change-Id: I516e5a501ec878d673f21e54d688fd2d21b624ef
Reviewed-on: http://codereview.qt.nokia.com/2080
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
The actual file defined in `sync.profile' and generated
by 'syncqt' is `qttestversion.h' instead of `qttestlibversion.h'
Change-Id: I90ed2d5b7cd9f98855a878c97afceced01e7e8b0
Reviewed-on: http://codereview.qt.nokia.com/2050
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The headers are just skipped, information stored in them is ignored.
Merge-request: 824
Change-Id: I48f37757114ed83cd5c92cb3d5a43eeaca4b91b3
Reviewed-on: http://codereview.qt.nokia.com/2108
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
According to the C++ standard, there is no guarantee that
you can cast between function pointers and void pointers
without data loss (section 5.2.10-6).
Change-Id: I27f4d835e4c8ca8ecca0d76cfea9ce34491956bd
Reviewed-on: http://codereview.qt.nokia.com/1995
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Putting the logic inside supportsTransformation() is a bit confusing and
that name is misleading.
Also move the same check in GL2 paint engine to the same place.
Change-Id: I182500a0ff375122e6be966b7ce2495c84d113d0
Reviewed-on: http://codereview.qt.nokia.com/2096
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
If QT_GUI_PASSWORD_ECHO_DELAY is defined in qplatformdefs.h with an
integer value in milliseconds, QLineEdit and TextInput will display
the last character entered unmasked for that delay period and then
mask the character as normal. If QT_GUI_PASSWORD_ECHO_DELAY is
not defined then the behaviour is unchanged.
Task-number: QTBUG-17003
Reviewed-by: Martin Jones
(cherry picked from commit f9e7aee2019d321edd655bfde7de43f20a106971)
Conflicts:
src/declarative/graphicsitems/qdeclarativetextinput.cpp
tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp
Change-Id: I3683223189b7176e4ef5081ee315c95a0efb9cfe
Reviewed-on: http://codereview.qt.nokia.com/2060
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
An extra script is added (qtmodule-configtests) which is currently
invoked from syncqt (with some derived parameters passed to it).
The module can optionally have an entry in the module's sync.profile
file in the form of a perl map of "test name" => parameters. Tests
can print an advisory message if they fail (e.g. "Install this
SDK/dev package"), or abort the syncqt process (e.g. mandatory
prereq missing). Also, if the test has a "requires(foo)" line
that results in it being skipped, this is also supported.
Change-Id: Ic3c820a488a0992c944994d4d7dc283da36742d6
Reviewed-on: http://codereview.qt.nokia.com/928
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Before, it was the length + 1, to include the ending \0 (for historical
reasons)
Having it the actual length is more intuitive and less error prone
Also added QT_ASCII_CAST_WARN to QConcatenable<QByteArray>::appendTo
to show the warnig that convertion from ascii to qstring occurs.
Change-Id: Ie7c8552b6b4e7ccb393cb09f5f0ca9b00336c714
Reviewed-by: thiago
Reviewed-on: http://codereview.qt.nokia.com/1988
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
This requires a fix for QByteArrayLiteral to work too.
Change-Id: I3c2a50ad431d5b0c014a341e675fa54e7b206e70
Merge-request: 27
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1967
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
The commit 412ef92162 introduced a fix, but the
fix was incomplete. Fix it for good.
Change-Id: I3e7fbdb294f8e960fbbf2e830790750240ed813a
Merge-request: 30
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1991
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Makes it easier to track which library output is coming from,
when building Qt with -j > 1.
Change-Id: I9acda04e84014dc441e409a0b24b2f78762dcc1c
Reviewed-on: http://codereview.qt.nokia.com/1765
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
By default, syncqt will now compress the console output of what it's
doing. Increasing the verbosity level will make syncqt output the same
as before
Change-Id: I542072504f022f87997b4036eda5747a5da88839
Reviewed-on: http://codereview.qt.nokia.com/1764
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Also add a fixme, since the version headers are currently
being created in the source directory.
Change-Id: If6e9eeba854a1f35561b69518eb8739dc28a58be
Reviewed-on: http://codereview.qt.nokia.com/1763
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Their paths may vary depending on configuration and
build/install state going forward.
Change-Id: I60c8bcd1dc6c2fb729bf84d211875a3d910d5e4a
Reviewed-on: http://codereview.qt.nokia.com/1761
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In debug_and_release builds, we have three passes, the glue
pass, and a pass for each build type. We only need to run
syncqt when we are in a glue pass, which is when
'build_pass' is not set. In non-debug_and_release builds,
build_pass is never set, so this condition works for all
build types, with multiple configurations or not.
Change-Id: I191da0df3ad422bb5fb8994391c2b2d2e23efc32
Reviewed-on: http://codereview.qt.nokia.com/1717
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If you ran qmake with 'qmake -r', default_pre.prf would only be run once
while default_post.prf would run for every sub-project.
This makes it more symmetrical and correct.
Change-Id: I1d096c38dffb16f1d256c511ed9e2912cfaefe66
Reviewed-on: http://codereview.qt.nokia.com/1716
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
"default" was used a very long time ago, and it's time to let it go.
Change-Id: I230573ef778789f6e1a5a7df3543e660392da39b
Reviewed-on: http://codereview.qt.nokia.com/1746
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The problem was that with an empty filename and index of 0, all raw fonts
loaded from data had the same FaceId, and we wouldn't bother to load
another one after doing this once.
This commit introduces a uuid in FaceId to help distinguish them in
that case.
Change-Id: I93655ff07a7d8856af1f854024e207c519f8ed1a
Reviewed-on: http://codereview.qt.nokia.com/1882
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This test was incorrectly assuming that a file named "Makefile" exists.
Also removing the `insignificant_test' mark for Linux.
Change-Id: I318b12f67e0476d6f08d1fc86194ca96f2bdb373
Reviewed-on: http://codereview.qt.nokia.com/1923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Before, it was the length + 1, to include the ending NUL or
U+0000. This avoids mistakes of -1 in QStringBuilder and will allow us
simpler code in the User-Defined Literal (future improvement)
Change-Id: I75c47d6c44579124888f925e240817229347dc70
Merge-request: 31
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1966
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
It was emitting signals from a thread for 15 seconds.
Doing this 10 times should be enough, and way faster.
Also a race made it sometimes wait 15 seconds while nothing was happening,
and then it would still succeed; the new code prevents this from happening.
Change-Id: Ib36785dd8090047c760ddcca44fc805efaef1bd8
Merge-request: 4
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1989
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Update the test after the introduction of QHostAddress::AnyIPv4
in 85136496bc
Change-Id: I3b84e85b6dcefa69bf5953205e288a6f0affb341
Reviewed-on: http://codereview.qt.nokia.com/1873
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Markus Goetz
That macro is a nightmare. It leads to writing code that is
thread-unsafe or other problems. So rewrite the code that used this
macro to use special-purpose classes with constructors.
This commit does not introduce new errors. The FIXME in qicon.cpp
(qtIconCache()) was a condition already present. It does fix the race
conditions that were present in qbrush.cpp nullBrushInstance() and
qfontengine.cpp qt_grayPalette().
Specialising QGlobalStatic is also evil.
Change-Id: I039311f6a5ac9ea4ad7b310b870a2adf888da7e5
Merge-request: 10
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1895
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
forward port from d7b688870aead912690188b324d370b920a7a600
Task-number: QTBUG-16607
Reviewed-by: Michael Goddard
(cherry picked from commit c89c7ebd2600f916eab937cb4853707ab066bc25)
Change-Id: I5130fcaaeb162b38c015f8649e83cbf820fb8a44
Reviewed-on: http://codereview.qt.nokia.com/1807
Reviewed-by: Charles Yin <charles.yin@nokia.com>
We need the content of the generated module master headers to be
reliable, so rebuilding in the same environment doesn't produce
different results. This minimizes the diff from package building
systems.
Change-Id: Ic914f56e13b11f313f01f6b8666c2d28aa50a985
Reviewed-on: http://codereview.qt.nokia.com/1900
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Arvid Picciani <arvid.picciani@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is needed in order to get proper font fallback, and incidentally
webfonts, working in QtWebKit.
See: https://bugs.webkit.org/show_bug.cgi?id=55036
Internal for now, maybe it could be made public for a future release.
Task-number: QTBUG-15575
Change-Id: I5c454689125cd9d5fda26ff2149208ed1beec24d
Reviewed-on: http://codereview.qt.nokia.com/1829
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Instead of having #ifdefs for the type of qreal, simply provide
overloads for both types.
Change-Id: I58582f57d5cd68fcad3fe9efb5fea5935f61b9e3
Merge-request: 17
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1542
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
