Some function names are special for qtestlib, in the sense that they can
not be specified as a command line argument to run individually.
In such cases qt-testrunner treats the failure specially and tries once
to re-run the full test executable.
Fixes: QTBUG-89011
Change-Id: I0cc25f91c57374e5ac65ade10e2e223fe969f211
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
To tool generates calls to qt6_add_resources instead, and we don't want
to promote the usage of CMAKE_AUTORCC.
Task-number: QTBUG-87643
Change-Id: I58458416514949a6ffc9b93c7eb6d24bc2ed01ca
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The pyparsing module's debug action properties have been renamed.
Check the existence of the attributes before assigning.
Change-Id: I8fff652304a0af215c56f54b63d613a1f6a5207a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The public suffix list scanner's utf8encode()'s main loop always
worked out whether a character is a hex digit, even when it didn't
need to know. Package the computation in a lambda and only test it
when it is needed. Also assert non-empty input generates non-empty
output.
Change-Id: Iaf48aad382624e421cea9c9cdb8bba5fc47b1596
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
It causes crashes because of interleaved execution of Quick tests.
Task-number: QTBUG-98350
Change-Id: I61e26f5da5617e06810db8eb7991f17eecdd3acb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It had been noticed that sometimes the Android emulator in our CI took
several minutes to fully boot. It turns out that this behavior can be
reproduced locally by removing the image files under $HOME/.android
especially the "userdata-qemu.img.qcow2" file.
Then the emulator goes through several reboots until fully booted with a
full set of packages installed. We discovered that the property that
signifies it is finished is dev.bootcomplete=1. So we now check for this
flag and remove the other heuristics we had.
We also disable the debug output to avoid hundreds lines of
logs. Instead we selectively print the values that the emulator returns,
every second until full boot is detected.
We increase the Coin timeout for the shell script, from 5min to 10min,
since it has been measured that it takes about 2.5min on a good day, and
the script itself retries several times to restart the emulator in case
of failure.
Finally we adjust the coding style a bit to be more consistent.
Pick-to: 6.3 6.2
Fixes: QTQAINFRA-4681
Change-Id: I77062dceb91477e957696c89bfacb4ebabc34c1f
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It happens that the android emulator supposedly "finishes" booting and
getprop shows bootanim=stopped and boot_completed=1. But sometimes not
all packages have been installed (`pm list packages` shows only 16
packages installed).
After around half a minute the boot animation starts spinning
(bootanim=running) again despite boot_completed=1 all the time. After
some minutes the boot animation stops again and the list of packages
contains 80 packages, among which is also the "development" package.
Only then is the device ready for `adb install` of custom packages.
This should be the last time we see the message:
Error: Could not access the Package Manager. Is the system running?
Just for completeness, we also properly disown the emulator process and
its file descriptors, since the parent shell dies but the process stays.
Pick-to: 6.3 6.2
Fixes: QTQAINFRA-4681
Change-Id: I2b9d4bdc3dac0f10d09d4f09c83b4028ebc31f48
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
It might print useful messages, even though they might come mixed with
other test messages.
However we can't leave stdout/stderr as is, because Coin agent hangs at
the end of the shell script, waiting for them to close. So we just
redirect them to a file.
Pick-to: 6.3 6.2
Change-Id: I797af78786b7df31131b3c3261e1c1fc00e5d460
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Script that wraps Qt test execution in order to iron-out flakiness.
Task-number: QTBUG-96353
Change-Id: Ie8ee780e3f4f8d086c080a7784f9f68fd1867be2
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
This commit extends functionality for QLocale::codeToLanguage()
and QLocale::languageToCode() by adding an additional argument
that allows selection of the ISO 639 code-set to consider for
those operations.
The following ISO 639 codes are supported:
* Part 1
* Part 2 bibliographic
* Part 2 terminological
* Part 3
As a result of this change the codeToLanguage() overload without
the additional argument now returns a Language value if it matches
any know code. Previously a valid language was returned only if
the function argument matched the first code defined for that
language from the above list.
[ChangeLog][QtCore][QLocale] Added overloads for codeToLanguage()
and languageToCode() that support specifying which ISO 639 codes
to consider.
Fixes: QTBUG-98129
Change-Id: I4da8a89e2e68a673cf63a621359cded609873fa2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Development web server for web applications. Supports
http and https. Sets COOP and COEP headers.
The web server script supports certificate generation using
mkcert (github.com/FiloSottile/mkcert). Briefly, mkcert
supports generating server certificates for the current
local ip address(es), using a certificate authority
which can be installed on devices where the app should
run.
The COOP and COEP headers are required to enable the
SharedArrayBuffer API, which is required for Emscripten’s
pthreads implementation.
The server serves the current directory on localhost
by default. Use the “-a” argument to bind to an additional
address, or "--all” to bind to all IPv4 addresses found on
local network interfaces. Change the directory by passing
it as a positional argument.
Task-number: QTBUG-79087
Change-Id: Id0cba649e42af53ed8106e336a77e78398bcf901
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
Update the locale generation script to support Kaingang and
Nheengatu languages. These are new in CLDR v40. Regenerate
the locale data.
Task-number: QTBUG-94358
Change-Id: I5195d5161d8c4d9f17129bbcfde39dfd3fcf1cd5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
FTP is insecure and is not supported by modern browsers anymore.
See also: https://mywiki.wooledge.org/FtpMustDie
Change-Id: Iad65d29912e79a4f3fadb9317bb5d9c5fe9b68d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The function qt_commandline_assignment and everything related to it is
removed from configure. It was only used in qtbase, and all usage has
been removed.
More general variable assignments will be added in a subsequent commit.
Task-number: QTBUG-88210
Change-Id: I7cfa782e89914f2b0dc0277c46e425c8a825557e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This corresponds to Unicode version 14.0.0.
Added the following scripts:
* CyproMinoan
* OldUyghur
* Tangsa
* Toto
* Vithkuqi
Full support of these scripts requires harfbuzz version 3.0.0,
this version adds support for Unicode 14.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/3.0.0
With this release 10 test cases in tst_qurluts46 were fixed, one
additional test case is failing in tst_qtextboundaryfinder and
is commented out. In total 62 line break test cases and 44 word
break test cases are failing.
A comment in src/corelib/text/qt_attribution.json was updated to
include the URL of the page containing UCD version number.
Fixes: QTBUG-94359
Change-Id: Iefc9ff13f3df279f91cbdb1246d56f75b20ecb35
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since commit f3c7d22dd0 we do not use
libraries from /usr/local and other non-system locations on macOS. But
our configure tests still did. This led to discrepancies between
find_package calls in configure tests and the Qt project itself.
Mentioned commit removed /usr/local and friends from
CMAKE_SYSTEM_PREFIX_PATH. But we can't pass this variable to the
configure tests, because CMake sets it up and overwrites our value.
Pass CMAKE_SYSTEM_PREFIX_PATH and CMAKE_SYSTEM_FRAMEWORK_PATH as
QT_CONFIGURE_TEST_CMAKE_SYSTEM_{PREFIX|FRAMEWORK}_PATH variables to
tests.
Tests with separate project files that call find_package() must add code
like this after the project() command:
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH)
set(CMAKE_SYSTEM_PREFIX_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH}")
endif()
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH)
set(CMAKE_SYSTEM_FRAMEWORK_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH}")
endif()
Adjust pro2cmake accordingly.
Task-number: QTBUG-97076
Change-Id: Iac1622768d1200e6ea63be569eef12b7eada6c76
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is not the correct script to update harfbuzz. The correct one is
src/3rdparty/harfbuzz-ng/import_from_tarball.sh
Change-Id: Ic9ed43cae591cd6957effb10f557166c43498ad9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add a script that downloads UCD data for a given Unicode version,
unpacks it, and copies the used files to appropriate locations inside
the Qt source code.
Also update the README and use an HTTPS link for the UCD data file.
FTP links are no longer supported by some browsers.
Task-number: QTBUG-94359
Change-Id: I2aa70a588f675e411fa6b3ce5b4444a7c07ed707
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously pro2cmake assumed that all .pro were internal Qt projects
like qtbase/src/corelib.pro and generated private api calls like
qt_internal_add_module().
Public CMake API calls (like qt_add_executable) were only generated if
an --is-example command line flag was passed to the script or if the
.pro file was located under the examples subfolder of a qt repo source
directory (indicated by the presence of a .qmake.conf file).
Change the logic to always generate public CMake API code by default,
unless a .cmake.conf/.qmake.conf file is encountered with a valid repo
module version inside, in which case apply the old heuristic of
checking for the ./examples subfolder.
The intention is to have a sensible default so that Qt users can use
the script to more easily migrate their qmake projects without having
to explicitly specify the --is-example flag.
Pick-to: 6.2
Task-number: QTBUG-96799
Change-Id: I38f4f1b349a5b9688cf7bc5914d4fde72e660a98
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Adapt to fb656c036d which removes
.qmake.conf files in repos by searching for either .qmake.conf or
.cmake.conf.
The locations of those files are only used to compute relative paths
based on the directory where the conf file is.
For now, remove the warning if a conf file is not found, because we
intend to change the script to generate user project code by default,
instead of Qt internal project code and the warning looks scary.
Pick-to: 6.2
Task-number: QTBUG-96799
Change-Id: I301e93d2ce5c05a52877eb6ed9eb9cee54fc5b15
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Introduce a new macro qt_internal_return_unless_building_tools which
simply calls return() if tools are not built. This macro is supposed to
be called after qt_internal_add_tool().
Using this macro avoids having to special-case code for when
qt_internal_add_tool() creates imported targets in cross-builds.
Adjust pro2cmake accordingly.
Task-number: QTBUG-85084
Change-Id: I9e1c455c29535dd8c318efa890ebd739c42effc1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed for subsequent change that will check and error out if the
version is lower than 3.16. We do that to ensure all policies
introduced by CMake up to version 3.16 have their behavior set to
NEW.
Pick-to: 6.2
Task-number: QTBUG-95018
Change-Id: Ieaf82c10987dd797d86a3fd4a986a67e72de486a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
They are not needed. Iterations over the table track their sizes.
The size-of-table constants just needed their -1s removed.
Incidentally use std::size() rather than sizeof(array)/sizeof(element).
Change-Id: Ie20eef9f6f5786d93c10b830a87e006d3c5bcc1a
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
pro2cmake.py:458:5: F841 local variable 'is_parent_path' is assigned
to but never used
Pick-to: 6.2
Change-Id: I1c61efe5cf568fa0c99b07eed28b93d3444a5fac
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This patch will slightly change the output of CMakeLists.txt files that
are generated for examples.
* set_target_properties() will no longer be added to the top-level
scope. If the WIN32 and MACOSX_BUNDLE properties should be added,
they will instead be added to qt_add_executable().
* The version in cmake_minimum_required() will now be 3.16, rather than
3.14.
Pick-to: 6.2
Change-Id: I79e1865dace5538d2b7ff264da02f9e28a655ae9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Store up to 2 QChar's for mapping values inside the mapping
table itself. This reduces the size of the superstring for
other mapping values.
results:
uncompressed size: 1146 characters
consolidated size: 1001 characters
memory usage: 48050 bytes
Task-number: QTBUG-85323
Change-Id: I922a6d2037551d0532ddae1a032ec1a9890f40a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This implementation stores mapping that are 1 QChar long
inside the mapping tables, the longer mappings are stored as
an offset and length pairs pointing into the common superstring
of all such mapping values.
Size comparison with the existing implementation follows.
old:
max mapping length: 6
memory usage: 103608 bytes
new:
uncompressed size: 3250 characters
consolidated size: 2367 characters
memory usage: 50782 bytes
Task-number: QTBUG-85323
Change-Id: I9f2e32438dd463457e0fcd783136bb17145e27a8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The new test is called tst_qurluts46. It verifies QUrl::{to,from}Ace()
functionality using the data from IdnaTestV2.txt supplied by Unicode.
The file was downloaded from
https://www.unicode.org/Public/idna/13.0.0/IdnaTestV2.txt
Task-Id: QTBUG-85371
Change-Id: I4c6a4942ef6018dafc90cb84ef73f6b2614566d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Update the Unicode data processing tool to generate properties
and mapping tables needed to implement UTS #46
(https://unicode.org/reports/tr46/). The implementation extends
the standard to allow usage of underscores in URLs. This is done
for compatibility with DNS-SD and SMB protocols.
The data file needed to generate the new properties was taken from
https://www.unicode.org/Public/idna/13.0.0/IdnaMappingTable.txt
Task-number: QTBUG-85323
Change-Id: I2c303bf8a08aefb18a7491fb9b55385563bfa219
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use context manager interface (with statement) to atomically update source
files. This ensures that all files are properly closed and the temporary
file is removed even in case of errors.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: I18cd96f1d03e467dea6212f6576a41e65f414ce1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Using NamedTemporaryFile instead mkstemp + fdopen simplifies the code.
It also makes it easier to switch to using context managers for handling
source file modification.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: Ibeae840ac6dde3d0b49cd7f985cfa6cd775b7f47
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
pathlib's API is more modern and easier to use than os.path. It
also allows to distinguish between paths and other strings in type
annotations.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: Ie6d9b4e35596f7f6befa4c9635f4a65ea3b20025
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
arparse is the standard way to parse command line arguments in Python.
It provides help and usage information for free and is easier to extend
than a custom argument parser.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: I1e4c9cd914449e083d01932bc871ef10d26f0bc2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace most uses of str.format() and string arithmetic by f-strings.
This results in more compact code and the code is easier to read
when using an appropriate editor.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: I3409f745b5d0324985cbd5690f5eda8d09b869ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The schema is in RelaxNG Compact syntax. It can be used to validate
files produced by the cldr2qlocalexml.py script and also gives an
overview of the file format.
Change-Id: I344978f2201c5e67e236ab580a12ad33262f33cb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is the standard way to call base class methods in Python 3 and
it is shorter than the custom one used now.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: Ifaff591a46e92148fbf514856109ff794a50c9f7
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of implementing all the intricacies of a cmp for the python
sort-function, support for which is due to be dropped at Python 3 in
any case, implement a much simpler key function that achieves the same
result.
In the process, eliminate the ugly kludge of setting an attribute on a
function to, in effect, communicate with it via a global. Instead,
instantiate a class, that wraps the value previously given to the
attribute and whose instance provides the key-function.
Thanks to Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io> for
pointing out that a key function is the way of the future - and
sorted() is a nicer way to sort.
Pick-to: 6.2
Change-Id: Icf1ed5597fedf420d054fbc860e3e7fc6615875c
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The ordering function used to sort the locale data generated for
QLocale attempted to sort the default territory for a given language
and script before other territories, but was too tangled for it to be
obvious this is what it was doing. The result turned out to be
non-transitive. Replace with code that implements the same preference
but only applies it where the result is compatible with transitivity.
This leads to a shuffling of the order of the Serbian-language
locales, which sorts the Cyrillic ones before the Latin ones. This is
consistent with my reading of the CLDR data, which fills in Cyrillic
and Serbia for Serbian; Serbian/Cyrillic/Serbia did previously sort
before all other Serbian variants.
Thanks to Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io> for
discovering the non-transitivity.
Pick-to: 6.2
Change-Id: I0ce9f78e620e714f980f32b85b7100ed0f92ad74
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The behavior of StopIteration in generators was changed in Python 3
(see https://www.python.org/dev/peps/pep-0479/). Not raising that
exception makes it easier to port the code to Python 3.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: Iac6e3f6f1e1e8ef3a1a0d89b19d2ac2d186434f5
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
IOError does not have property 'message' in Python 3. Instead of
attempting to access it, just use the string representation of
the exception object. This produces the error message possibly combined
with additional arguments in both Python 2 and Python 3.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: Icb198a409e7f80b832e474d8390b770fdeacc6c2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Name 'stem' is undefined inside CalendarDataWriter.write(). The error
was repoted by flake8.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: Ib816b40d0bde2afd3112da76deee0ce39985693a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This way the output is easier to compare between versions.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: If4053c574c4ad200a179b06276bd889f2cb9e1c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Output of cldr2qlocalexml.py looks weird without the final new line.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: I5d675e475c57cdc8101887c39052007ba0a19857
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is not a script that can be run independently.
Task-number: QTBUG-83488
Pick-to: 6.2
Change-Id: I82a93b9ab37ae759b789058d48e94298ecd29b6f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Introduce two new packages WrapVulkanHeaders and WrapVulkan similar to
the OpenSSL wrapper packages.
WrapVulkanHeaders uses FindVulkan and is marked as found if Vulkan
headers are found (that's the only part the Qt build requires).
The WrapVulkan package is currently not used, but is there for
symmetry.
The Vulkan feature is now disabled by default on QNX, because the
QNX toolchain file in the CI does not set
CMAKE_FIND_ROOT_PATH_MODE-like variables and CMake ends up finding
host Vulkan headers causing the build to break.
Pick-to: 6.2
Fixes: QTBUG-92157
Change-Id: I05309821f866456cd42e7f85bf8b76ba099df656
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add 'Private' suffix to the internal module names in the mappings of
the qmake files for modules of the qtdeclarative repo.
Change-Id: I1592ebad0f0db553322ea766561b1b8c3fd38aea
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add 'Private' suffix to the internal module names in the mappings of
the qmake files.
Change-Id: Iacc487aa5e463a522341e526bf8580be2868cf37
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We should at least know when members of QLocale's enums aren't adding
any value, and it may make sense to deprecate the unused ones.
Change-Id: Icf202f81d2a35904c13ccdc202d41985bcb3f2e6
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Add FindWrapSystemMd4c.cmake so that the old md4c target can be used
as well as the new one and set WrapSystemMd4c_FOUND.
Link to the imported target WrapSystemMd4c::WrapSystemMd4c if the
system library is used.
Add qt_find_package line to find the package in configure.cmake.
Fix the condition for enabling system-textmarkdownreader, it includes
testing for textmarkdownreader because even if the code would compile
correctly without it, it looks strange when the output says
"textmarkdownreader no" and under "using system libmd4c yes" even if
libmd4c is not used.
Use system include when system-markdownreader is enabled.
Add library mapping for libmd4c.
Change-Id: Id5d5b13d6691a8c1cdf627238887977c847c1e67
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change add option to determine used Android emulator version using
environment variable. If variable is not set @x86emulator will be used
as default value.
Change-Id: Ifc52d07d058bf078bf915ca78683822a966b58fb
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Modify pro2cmake to add the 'Private' suffix to the internal module
name by default.
Change-Id: Ia7b2fce387fad5f207a7379ac738173ff9262071
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Rename internal modules to adjust their names to the internal module
policy. Also modify mappings of the qmake file converters.
Change-Id: I69aee1e8136c2379608d9d22d718f8c8a5f73124
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Force the emulator to use software acceleration to avoid a crash.
Change-Id: I1e73b8bc6485b0854cf83f5d9faa5d5f872a90df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change the nomenclature used in the scripts and the QLocaleXML data
format to use "territory" and "territories" in place of "country" and
"countries". Does not change the generated source files.
Change-Id: I4b208d8d01ad2bfc70d289fa6551f7e0355df5ef
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These variables provide mappings, not lists, so name them non-deceptively.
Change-Id: Idf15e78ad73790bc86dd8b9d4f248d1c4f73993c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The only reason cldr.py imported enumdata was so as to pass what it
imported to writer.enumData(); that method might as well do the import
itself.
Change-Id: Ie77dcd29058f926b8cca4deef35837f30505859f
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
It's now a data-only module. The callers of its code-to-ID functions
have, for some time now, been rearranging its mappings to get at data
efficiently.
Change-Id: Ia16dcaa767203cdf3b81a96bd51793491ad41563
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patchset adds the bits needed for manual tests to work standalone.
Amends ebaa1c15a101579d9296336491e36c63b979f18d
Pick-to: 6.1
Task-number: QTCREATORBUG-25389
Change-Id: Ifc70391bda2a3eea3c7492a58353a703cdc3114c
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In C++ we can give names to classes, so just use that, without
C-isms (typedef struct).
Change-Id: I27239d8d5c28864b3f4f7bd4013cc47c045b4b04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The table has been moved to QtGui, adjust the generated "location"
in the (C) comment.
Change-Id: I536fe21ab59085c0d8d89aa638b50876fe3bf1cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Xcode allows building a project targeting either the device or
simulator sysroot in one single build dir, but for the sysroot
switching to work there should be no linker or compiler flags
referencing absolute paths of a specific sysroot.
During CMake configuration of a project targeting iOS, all found
system libraries will be within one single sysroot, either the device
one or the simulator one, whichever one was passed to
CMAKE_OSX_SYSROOT. CMake will then generate the Xcode project
and pass those absolute paths, which makes sysroot switching within
Xcode not work.
To avoid that, the CMake documentation recommends passing linker and
framework flags of the form '-lfoo' and '-framework bar' instead of
absolute paths. Xcode then takes care of setting the correct framework
search path.
Zlib is one of the libraries found in the iOS sysroot and thus passed
as absolute path.
To avoid that, create a new FindWrapZLIB find script. The target it
creates will pass the absolute path to the library on non Apple
platforms and an -lz linker flag on Apple platforms (macOS and iOS).
To avoid issues with target global promotion when system PNG package
is found, ensure that a found ZLIB::ZLIB target is promoted to global
manually in src/gui/configure.cmake.
Pick-to: 6.1
Change-Id: I8bd8649be4f680a331ad51925f27cb9d13ac5e5f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
UAX #29 in Unicode 11 changed the EGC algorithm to its current form.
Although Qt has upgraded the Unicode tables all the way up to
Unicode 13, the algorithm has never been adapted; in other words,
it has been working by chance for years. Luckily, MOST
of the cases were dealt with correctly, but emoji handling
actually manages to break it.
This commit:
* Adds parsing of emoji-data.txt into the unicode table generator.
That is necessary to extract the Extended_Pictographic property,
which is used by the EGC algorithm.
* Regenerates the tables.
* Removes some obsoleted grapheme cluster break properties, and
adds the ones added in the meanwhile.
* Rewrites the EGC algorithm according to Unicode 13. This is
done by simplifying a lot the lookup table. Some rules (GB11,
GB12, GB13) can't be done by the table alone so some hand-rolled
code is necessary in that case.
* Thanks to these fixes, the complete upstream GraphemeBreakTest
now passes. Remove the "edited" version that ignored some rows
(because they were failing).
Change-Id: Iaa07cb2e6d0ab9deac28397f46d9af189d2edf8b
Pick-to: 6.1 6.0 5.15
Fixes: QTBUG-92822
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If one "accidentally" uses a release build of the unicode tool,
the asserts within it won't fire. Enable them in all cases.
Change-Id: I9d63641dc6d6d2e5805b61b36f8c28e624b25e12
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The use of "Country" is misleading as some entries in the enumeration
are not countries (eg, HongKong), for all that most are. The Unicode
Consortium's Common Locale Data Repository (CLDR, from which QLocale's
data is taken) calls these territories, so introduce territory-based
names and prepare to deprecate the country-based ones in due course.
[ChangeLog][QtCore][QLocale] QLocale now has Territory as an alias for
its Country enumeration, and associated territory-based names to match
its country-named methods, to better match the usage in relevant
standards. The country-based names shall in due course be deprecated
in favor of the territory-based names.
Fixes: QTBUG-91686
Change-Id: Ia1ae1ad7323867016186fb775c9600cd5113aa42
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use PROJECT_VERSION instead of CMAKE_PROJECT_VERSION when setting the
version of a qml module, which extracts the version of the latest
project() call rather than the top-level one.
Using CMAKE_PROJECT_VERSION caused issues in top-level builds where
the qtdeclarative version is 6.2, but the top-level project version is
still 6.1 and hasn't been updated to 6.2, causing qml module import
errors.
This was probably an oversight during initial implementation of qml
support in pro2cmake.
So projects that define qml modules should be adapted accordingly.
Amends cce8ada814
Amends 28fff4a551
Pick-to: 6.1 6.0
Task-number: QTBUG-92861
Change-Id: I494784694e997501a5bc4fd0c0eac458ddc248aa
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On BSD systems backtrace lies in libexecinfo. Use
FindBacktrace from CMake to be able to resolve
backtrace on more unixes than linux.
Change-Id: Ie14fd1727d2da03645fc2d6de10c0217baabad6b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Set CMake variable X11_SUPPORTED for all systems that have X11.
Adjust _adjust_library_map() in util/cmake/helper.py to apply X11_SUPPORTED
condition around X11 related packages instead of just LINUX.
Adjust configure.cmake in src/gui based on this change.
Why, because X11 is not just Linux.
Change-Id: Ic3c04eaa55301d1237c7e74281eccd4f8e27e9ce
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We had two workarounds:
* script that adds Gui to tests
* create a symbolic link for the qt install dir to fake_prefix which
androiddelployqt was expecting them to be under
Both issues are fixed, thus removing the workarounds.
Pick-to: 6.1 6.0
Change-Id: Ic022bece15afe92c693d573893d260b13b4227ed
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
A typo-fix, a simplification and a trivial restructuring.
Change-Id: I434457c4eb83eebfb9b472c6914659199fe5be71
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The generated code contained many repeated blank lines.
Most main()s were preceded by one, but not all.
Only include blank lines for actual empty entries in lists, where
configure.json specified them, plus one before main if anything else
precedes it.
Change-Id: I6e6c34940e08712a1aa848a3c9ad1b0fb5806d77
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The main(void) signature obviates the need for unused parameters and
has existed since (at least) C89; so use that instead of the
old-fashioned argc/argv arguments we don't use in any of these tests.
Change-Id: Ibfe850a1fce378673c9781011475ea623fd75ad4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Keep the c++2a feature, but make it an alias for compatibility
purposes.
Pick-to: 6.1
Change-Id: I6f153109be84659806f1b7a57a88a187875166d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
No change to QLocale's data, one addition to the Windows time-zone
data. What was formerly "Us Mountain Standard time / Canada" is now
Yukon Standard Time.
Fixes: QTBUG-89784
Pick-to: 6.0 5.15
Change-Id: I4c9a23620e74ea379be8a4c5ba0896d35fe9b594
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace condition of XCB::XFIXES from the 'XCB_XFIXES_FOUND' variable
to 'TARGET XCB::XFIXES'.
Fixes: QTBUG-89979
Change-Id: I77b8b4046dc6852ecb209d942ee94d864a35c378
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The program to digest the public suffix list required the user to
initially grep away the comments and blank lines. Filtering those
lines out in the code to read the file is trivial, so save the user
one step in the process.
Change-Id: I08f2594fc4236a689c849d42b5446efa9ec2ef7a
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's a purely command-line program, no need for gui.
Noticed on making a first (abortive) attempt to convert to CMake.
Change-Id: I767f59587d9fe902aec46cd1742576b6bfc84274
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Modules that are ported for dev should get this version now.
Change-Id: I11d47504f163798d53c51e56ef978edaa711d93a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
