"f" is used a lot as the name of the argument to methods in this class,
so rename the member to something else.
Change-Id: Iddb0e1ba1f6a3e0adf5d1b8ff00a8f82a68f6738
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not so much about performance as it is better readability, it's the same
file, we're just rereading its metadata from the filesystem.
Change-Id: Ia7ae35aea5fec67ead1fc8ead99586b3b0a14727
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
These are timestamps, so UTC is all we need. This is faster than getting
the times in the Local Time Zone just to compare them.
Change-Id: I5ceebafea12a7015dce9e3c00d1b35f8da2afb1d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Our previous assumption was that the right value was used if we ran into
an "access denied" error. That error only states that the function has
been called before though. The warning should be omitted if the right
value has been set before.
Pick-to: 6.5
Change-Id: I1379242f68e2f09bc6a25dd322fe3634622d8e8e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Use less \notes, more sections.
Change-Id: I4c94d67a66c906e0d3b6f55127fce85e974b9138
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
The fileTime() method and co. get the specified file time but always
converted it to LocalTime; in some cases, e.g. when sorting dir entries by
last modification time in QDir, or when comparing a timestamp of a file
against its last modification time, basically all that's needed is the last
modification time returned by the underlying stat call (in QFileSystemEngine),
which is msecs since the Epoch.
API docs changes coauthored with Kai Köhne.
QDir benchmark results follow in the next commit.
[ChangeLog][QtCore][QFileInfo] Overload file time related methods to
take QTimeZone argument; mainly useful if all you need is UTC time,
e.g. to compare file timestamps, this is inherently faster as no
conversions need to be performed.
Change-Id: If73a54e935fe272e34acbf083973c30b61510be8
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing symLinkTarget() always resolves the symlink target to an
absolute path; readSymLink() provides access to the relative path when
that is how the symlink references its target.
[ChangeLog][QtCore][QFileInfo] Added readSymLink() to read the symlink's
raw target, without resolving to an absolute path.
Fixes: QTBUG-96761
Change-Id: I360e55f1a3bdb00e2966229ea8de78cf29a29417
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drop the use of \qtcmakepackage for the module page that results in
incorrect instructions, and replace it with a snippet with the correct
commands to use.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-109214
Change-Id: I936910ddb9e4118f931d85e4b096ad52006dcc32
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Use new case folding functions in the implementation of
QLatin1StringMatcher instead.
Task-number: QTBUG-100236
Change-Id: I853091d11070483ad2128b9de3c776f5ca8e7f45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is now not the screen that handles all of the events and relays
them to individual windows, but the window elements themselves.
This allows us to get rid of manual window targeting logic and let
the browser do its job.
Fixes: QTBUG-107217
Pick-to: 6.5
Change-Id: I4dc5a74b1343f027f72c1da4623b99cd28bfbb38
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Adding support to different authentication modes to Oracle DB.
Adjust the connection string parsing a little bit as a drive-by.
Change-Id: I24ed70ed5085f22ba58eff70caa685579d31c96f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
testWhiteSpaceNames() returns true for all current database drivers so
it's useless and can be removed. safeDropView() and getPSQLVersion()
is not called anywhere, getMySqlVersion() is only used for a check for a
MySql version we no longer support.
Change-Id: I8d02f17f475821e81d309ee96897e772cdfb895d
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Move the documentation of the connection options to the SQL Drivers page
and try to add a small but useful documention to each option.
Fixes: QTBUG-109507
Change-Id: Id1d51d7a666ac0f15cde8d73bff153dad271d34b
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Cleanup an unused function in QSqlRecordPrivate and use member
initializers for the ctors in QSqlRecord/QSqlField
Change-Id: I7d585e70c83373b3092e9f1425233af42b8c379d
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Move the paragraphs dealing with encodeName()/decodeName() and Unix
special files to 'Platform Specific Issues'.
Pick-to: 6.5
Change-Id: I076191e041ef238556aab28b5ad5d51974f8f7ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it explicit that the local 8 bit encoding is UTF-8 on all
platforms but Windows.
Pick-to: 6.5
Change-Id: Icaabfd28689a71ee5cc2957f058f9388405496d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTemporaryFile is derived from QFile, so it's not a reason why
QFileDevice should exist. Instead, mention QSaveFile.
Pick-to: 6.5
Change-Id: I1de3a32746a313ec57323f3f8ae42e326f11d147
Reviewed-by: David Faure <david.faure@kdab.com>
Refactor the getImage/Pixmap and getImageSize/PixmapSize functions into
templates. The functions were practically identical, and the
inconsistencies between them seem to be rather bugs or omissions than
intentional. E.g. maintaining the aspect ratio if width/height are not
specified was only implemented for the pixmap case.
Task-number: QTBUG-109212
Change-Id: Ic0de0a2d7f883c4efac97111e2c1e438f278d70d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
The qt_findAtNxFile helper in qicon.cpp expects a local file name that
can be probed with QFile::exists. If the src attribute of an <img>
element specifies the location of the image as a file:/ or qrc:/ url
rather than as a local file name, then we need to strip the scheme
off the file path, and in the case of a qrc URL leave the :/ prefix
before calling the qt_findAtNxFile helper.
Amends, and partially reverts, 760df72565.
We can't avoid testing whether the source in the HTML is provided as a
URL before interpreting it as a file name.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-109212
Change-Id: I7ea7a5bfde79bab90a8025c42e754129813dd0fc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The 413593183b patch changed the way
how the display metrics are retrieved. By doing so, it was found that
the previous way retrieved the scaledDensity always equal to density.
It is intentional for scaledDensity to be dependent on the font scale
chosen by the user. However, this change altered not only the font scale
but also the layout. This patch will make the layout dependent on the
density instead of the scaledDensity and normalize the way the display
metrics are retrieved among Android versions.
Currently, the fontScale is ignored, QTBUG-109566 will track future
developments.
Fixes: QTBUG-109026
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I6adacd17583cbe9bee368af35c50b780872ab222
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Variable unused causes compile error or warning, use Q_UNUSED to eliminate it.
Change-Id: I6efbc3150cef962fa45ccbbed0dc04794db3cbbe
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The mutual ownership of chunkCompleted<->fileReader caused both not
to be freed, which resulted in a memory leak. Resolve this by
introducing the ChunkedFileReader class which owns itself until file
read is finished.
Also, resolve a similar issue in qwasmlocalfileaccess.
Fixes: QTBUG-109436
Pick-to: 6.5
Change-Id: Ieec4cde15a893fa6a2e21a62d3bb6637374c5364
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QtBase didn't contain any checks for QT_RESTRICTED_CAST_FROM_ASCII, so
a recent addition to the QString::append/insert/prepend overload set
made calls with C string literal arguments ambiguous without the CI
noticing. We had a similar problem with QString::multiArg.
To increase test coverage, we now run tst_qstring two times:
- without any define
- with QT_RESTRICTED_CAST_FROM_ASCII (lots of changes necessary)
Most removals are expected, because they disable tests that check the
implicit conversions from QByteArray and const char*, but the
relational operators with QLatin1String objects might warrant fixing.
In some places, when the conversion wasn't the functionality under
test, replaced C string literals or QByteArrays with QLatin1String.
We should also test with QT_NO_CAST_FROM_ASCII, but that's even larger
surgery.
QString doesn't have a ctor from std::nullptr_t, so QString s =
nullptr; doesn't compile in C++17 mode, but does in C++20 mode, due to
the const char8_t* ctor.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I0c5a31719a4b8dd585dd748e0ca0d99964866064
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The latter are locale-dependent, and while that doesn't produce wrong
results here¹, it means they need to be out-of-line, whereas
QtMiscUtils functions are inline constexpr.
¹ isdigit could give a false positive on non-US-ASCII-digits, I
suppose.
As a drive-by, rely on the QtMiscUtils::fromHex() returning a negative
value when a non-hex character was encountered, to avoid the extra
isxdigit() checks. This property is preserved through the bit
manipulations: ORing together negative values yields a negative number
iff either or both operands were negative (in two's complement, which
Qt requires). The caller also checks the array bounds before calling,
so the isxdigit() calls didn't act as an implicit bounds check
(returning false if they encounter '\0'), either.
Task-number: QTBUG-109235
Pick-to: 6.5
Change-Id: I4cd734468e223f1047a53afd264d077b28cb5f1d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Compared to std::shared_ptr, QSharedPointer requires 2x the atomic
operations per copy, and this code uses _a lot_ of copies.
Port to std::shared_ptr. The uses are all in inline, non-exported
code, so there's no BC or SC issue here. Old code will happily
continue to use its QSharedPointer-based code, while recompiled code
will enjoy the transparent efficiency gain.
This also helps prepare QtCore for an eventual QT_NO_SHARED_POINTER
(which QtCore will not be able to set on itself, because QPointer is
still not ported away from QWeakPointer, but which should affect as
few headers as possible).
Pick-to: 6.5
Change-Id: I8159c38d93f3bcfc22a236c8c26541ab5ee4e6d0
Reviewed-by: Sona Kurazyan <kurazyan.sona@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Added docs for
- move-ctor, -assignment operator
- move-construction and -assignment from QSP<X>
- qHash()
There's more stuff missing, but I declare 'twas enough qdoc wrangling
for this round.
The texts are taken from other smart pointer docs, esp. QESDP, so
they're consistent.
Fixes: QTBUG-83134
Fixes: QTBUG-63700
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Iff980d043e1635ed6cfdd3113c68bc23f3a0bad7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ASan inserts a lot of function calls in between our calls, so they end
up in the backtrace and cause unexpected results.
Similar to c672f148db.
Fixes: QTBUG-109559
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd2bc0317ae4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We only need to skip the backtrace ones, because there's no library
called "Qt6Core".
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd680058ba6e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reorganize them and fix the comment.
Pick-to: 6.4 6.5
Change-Id: I69ecc04064514f939896fffd1732dd57203cb21f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If an image source in HTML is specified via local file name or resource
path (i.e. without qrc prefix), then the correct image is loaded.
With file:/ or qrc:/ schema however, the image is either not loaded at
all, or the 2x image is not loaded. The qt_findAtNxFile helper in
qicon.cpp gets a URL path, but expects a file path (that can be tested
with QFile::exists).
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Ibcf687c69b3e53a10f21d718d28c8177a02d6be6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 52ce0c177e, which added the test
without adding it to the parent directory.
Refactor the test code to be data driven, add the image files as
external test data files, and adjust the test code to find the files.
Use the QTextImageFormat from the document rather than a manually
crafted one, as otherwise we don't test a real usecase.
This also makes the test more flexible for adding qrc, resources, and
file URLs.
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Id0771037b961d95ec3cadd0cd6467d2448f22884
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
It's used by the WASM and iOS platform plugins.
Change-Id: Ia0c833e11a8db8d68782c84937fb444e5430cefe
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After commit cc9144b4f3, virtual keyboard
is hiding after clicking the done button. This is expected behavior,
but not in case when imOption is set to IME_FLAG_NO_ENTER_ACTION[0]
This commit removes hiding keyboard in mentioned case.
[0]https://developer.android.com/reference/android/view/inputmethod/EditorInfo#IME_FLAG_NO_ENTER_ACTION
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-107662
Change-Id: Id280c4a67e3940fce5045724f77284a77c886f06
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Let CMAKE_INSTALL_PREFIX be "/usr/local", and consider a project with a
call to qt_generate_deploy_app_script.
Installing the project with DESTDIR set to "/tmp/bla" would install the
project targets to "/tmp/bla/usr/local" but the Qt libraries to
"/tmp/bla/tmp/bla/usr/local".
That happened, because we used QT_DEPLOY_PREFIX as DESTINATION in
file(INSTALL). QT_DEPLOY_PREFIX starts with $ENV{DESTDIR} and
file(INSTALL) also prepends DESTDIR.
The value of QT_DEPLOY_PREFIX is controlled by CMAKE_INSTALL_PREFIX. Use
the latter as DESTINATION in file(INSTALL) calls.
Pick-to: 6.5
Task-number: QTBUG-109553
Change-Id: I8f06d81968fa0de4f17c4f8bc9b17cc052da4c12
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Allow moving content uris if the destination is provided
a full content uri with a parent that's different from the
source content uri (i.e. different folders).
Note: since the underlaying Android APIs don't always know about
the parent of a uri, we do some step to deduce that, but that's
not always guaranteed to work.
Pick-to: 6.5 6.4 6.2
Task-number: QTBUG-98974
Change-Id: If21954e5963f4eb0b96c7ccd983943ea2cab5b24
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Change-Id: I10e27a92d37e5bf131c7c0f22860a957d1f1592d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Behavior of EnterKey for virtual keyboard need to be changed for
QLineEdit. Before this commit, ImeOption was set to IME_ACTION_DONE.
Because of that, setting any text in QLineEdit automatically accept
QDialogs. That was annoying, when more than one QLineEdit need to be
set.
[ChangeLog][Widgets][Android] EnterKey type is now changed from
EnterKeyDefault to EnterKeyNext for virtual keyboard in QLineEdit. It is
done only if the focus can be moved to widget below.
Fixes: QTBUG-61652
Change-Id: I98a7686f9f675fccf0112b8d27d48ad8fd7a887f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The issue came from 53b413f1c5.
Change-Id: Idb77a66dbd8649bdece213298b1e1676b22cc8ba
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
