All qdocconf settings that should be used by all Qt modules are now in
qt-module-defaults.qdocconf.
Change-Id: I2a0315a55db3fcbb0160c4392d2da98611043d83
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The simplePen property was not reset when reusing the QPrinter,
thus we would output two identical setPen() commands in the PDF
making the autotest that compares the results fail.
Task-number: QTBUG-27171
Change-Id: I601042ec59e45ef72a56f230f6112a91a259b4a5
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The ifndef was added to the header but was missing in
the implementation file.
Change-Id: I25111b34b9c087465306ef81c23d6667257b5e71
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
... provided perl is available.
configure.exe already does that, and there is no reason not to.
Change-Id: If398864697fcfbe4545248cec33e70a1ec4a29a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it needs no special env variables any more
Change-Id: I60a7ab6eabb9280b02cd510418c0842d05fc1306
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
On Windows, with the devenv makecommand, this seems to be necessary.
With msbuild it is not needed, nor with nmake, but it is no harm anyway.
This is also what CMake does in its unit tests.
Change-Id: I45f867e699c28a43ee607b47db108021fc7fef8b
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Marcus D. Hanwell <marcus.hanwell@kitware.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test actually passes on Windows, so removing the QSKIP
Task-number: QTBUG-24543
Change-Id: Ic2666665f2882392aec92a665f51d6c5dd3355f8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This should not be encouraged, and it currently breaks cross-module
linking for qdoc.
With this in place, we can actually generated cross-references
downwards (e.g. from corelib to gui), although in a bit hackish way
at the moment.
Change-Id: I32919e04535464438e3bb83e41f9a40b752c71c6
Reviewed-by: Martin Smith <martin.smith@nokia.com>
In case of an error when calling realpath(), the return value buffer
was uninitalized, but still used.
Now the error value is checked to prevent this. Additionally, this fixes
a memory leak in the error case.
In addition, use the modern version of realpath() on QNX, since it is
available there.
Change-Id: I0ac83454679619f379df9c482c958789ab31866a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
In WinCE and WEC7 the IOCTL_NDISUIO_QUERY_OID_VALUE DeviceIoControl
calls need to be used instead of OCTL_NDIS_QUERY_GLOBAL_STATS which
is not supported in WinCE / WEC7.
Task-number: QTBUG-24525
Change-Id: Ic091b5c38db95ffc657968b232ae0965ae6a4e81
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The signal has nothing to do with any action on the remote side. It is
emitted when the class has written the bytes to the operating system.
More likely than not, the bytes have not been even sent yet, much less
read by the other side.
Change-Id: Ia04d37ffc8c0788173d3d29f49c5759bcdef6afa
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
All examples running on 10.6 complained about missing autoreleasepools. This
patch adds them in where they were missing.
Change-Id: I18a1ddf486efdd1ece82d82d111b46e2ef064ff1
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
This issue originates from https://bugs.webkit.org/show_bug.cgi?id=95736
Suppose we have
main.cpp
somedirectory/someheader.h -- which has #include "anotherheader.h"
anotherheader.h
With unix generator, the directory where main.cpp is located is included,
unless no_include_pwd is set. Hence the look-up of anotherheader.h from
within someheader.h will work.
With MSVC this works because MSVC looks "in the directories of any
previously opened include files in the reverse order in which they were
opened." (from http://msdn.microsoft.com/en-us/library/36k2cdd4.aspx)
Unfortunately the build breaks with MinGW, because it lacks support for
including the source directory in the include search path just like the
unix generator does.
This patch adds the same functionality to the MinGW generator as well as
an auto-test.
Change-Id: Iea8bb06e34862c51b8fd4eca2ee26668e24a319a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt expects the mouse to be captured on any button press
until release.
Remove flags to store capture, use WinAPI GetCapture() instead.
Remove setMouseGrabEnabled_sys(), streamline code.
Replacement for the reverted change
6b5bbc531b for QTBUG-25977.
Task-number: QTBUG-27132
Task-number: QTBUG-27039
Task-number: QTBUG-25977
Task-number: QTBUG-26962
Change-Id: If86428eabfadcafd16da10f134a419f833185272
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Since we do not pass in the destination dpi to CoreText when making
the font, we need to pass in a point size which is scaled to include
the dpi change. The default dpi for the screen is 72, thus the
scale factor is destinationDpi/72. Since pixelSize = pointSize / 72 * dpi,
the pixelSize is actually the scaled point size for the destination
dpi, thus we pass in that instead.
Note that this only works because the default screen dpi on Mac is 72.
You can look at the CoreText font database in Qt 4.8 to verify that the
same trick is used there.
When 96 dpi is explicitly set (specifically for autotests), we need to
fall back to the old behavior, since the OSX platform plugin will then
use 72 for some fonts and 96 for others making it impossible to detect
the DPI in a consistent way. The correct fix would be to pass in the
dpi to the function, but until that fix can be made, we just use the
old code to keep the autotests passing.
Task-number: QTBUG-25555
Change-Id: Id20a273549c3abf3db56ef1c48553c0958c48d61
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Fix some typos. Fix some sentences to make them clearer to understand.
Fix some Qt4-widget-centric info.
Change-Id: I77f23ce8cb9a6752a0f8dd214c9ff550d620cd21
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Fix some typos. Fix some sentences to make them clearer to understand.
After searching for Qt4-specific info, nothing found.
Eskil Abrahamsen Blomfeldt
Change-Id: I5c53d353d52c094c46d560bc4ff57b93def7550f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
they just forgot to declare it.
see: bionic ad1ff2fb268034074488f0b4b30b5311008b8617
Change-Id: Ide0c0edaa1b5fd17e58ffce1e3d49e320d80e57a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Arvid Picciani <aep@exys.org>
This especially affected the print preview dialog, where certain
characters would be grossly mispositioned.
Task-number: QTBUG-27131
Change-Id: I385474a6f609a8f4291988206c7e63a0747673dd
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Do not compare a QString to "". Instead use the .isEmpty() method.
Change-Id: Ifda1361b2c288dd590f0294daacdf5e2d9241522
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Geir Vattekar <geir.vattekar@nokia.com>
Showing a compo dropdown would cause the parent to
become deactivated (Windows). Introduced by:
8368557b9c for
QTBUG-25852 , QTBUG-23699 .
Task-number: QTBUG-27145
Change-Id: I7b89697a2c55d58cc0ab184b61a0cff8bf2275ec
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Replaced with qt-project.org test domain.
The connectToMultiIP auto test is still disabled due to lack of test infrastructure.
Task-number: QTBUG-23294
Change-Id: Icf01aabb0ae503291abdda4e8f773f8e0a08931a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The old name was too generic and was likely to cause warnings in user
code.
Change-Id: I7126d8fe89a394cd8388af5a030961af7b69c741
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I807b0e88ac71a0cb367fb4170cca8f2cb0ad43f3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This allows some more goodies to be available in C mode.
Change-Id: I5c8a19b6150081a20aae8d3d9d8d7cb30d750536
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These macros expand to C++ code, so there's no point in having them
defined in the non-C++ part of qglobal.h.
Change-Id: Ic5763196391798e362d33466114969818e7e6793
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Moc still used a different and quite a bit more complicated
algorithm to hash 8bit strings then QByteArray.
Change-Id: I86efb08d5ab7de1863fc168dcfc73399e72e1331
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The constructor being removed was needed to allow the CI to work until
commit e88f56afc2c889eede8c719b9ce7b621f49a96f9 in qtdeclarative was
merged.
This completes the move from qreal->float in QtGui/math3d.
Change-Id: I2afd108bd9398a1e6925b2885a90dbbad4d25669
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Also fixing some includes and re-enabling the test
Change-Id: I4a061e106c2e55db39b8000729737a93e3d7714a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Use an include guard in headers to ensure the header is not included
more than once. Make the header guard match its file name.
Change-Id: Icf7d7d4bed91443b3b21ef5d4219dbd260dffef3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All of these are very QWidget centric.
They cannot properly refer to the
sources without being part of the widget module.
This fixes around 300 qdoc errors.
Change-Id: I5a7c2dbc10f7913f7b088d6a0ac81323b3c287ac
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This header guard is duplicated with qmlvisitor.h
Change-Id: I11787dd8af2834e446eabd219f93b74c0b52428d
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Use an include guard in headers to ensure the header is not included
more than once. Make the header guard match its file name.
Change-Id: Iefc02181fe235ede51c567fb54997531e5cd08a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC 13.0 adds some new C++11 features that we can now support.
Change-Id: Ia870a3bb0172ff124983725300e8f9bf2e325ec6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This means user applications will default to Qt 5.0's API. Higher
versions or Qt 4 compatibility are opt-in.
Also set the default for Qt's own build to be 5.0 on all platforms
except Windows. On Windows, we need to set it to 4.9.
Task-number: QTBUG-25053
Change-Id: I603e0fda4785e64e1413cd82153a89e48005aa40
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
these macros behave counter-intuitively, so don't use them unless the code
structure really suggests their use.
Change-Id: I58213b39f8a98e4368901217fac14ca49c28b8cf
Reviewed-by: hjk <qthjk@ovi.com>
"CONFIG += qt warn_on release link_prl" is in every single spec (though
for link_prl there is one genuine exception and two apparent omissions).
Change-Id: I72e1e315586af828eefa3b0b70998ab892ec3c1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason whatsoever to duplicate this so many times, and even
less reason to have specs with a deviating default.
Change-Id: Ia25836c079580adebc373697b8bd03598f79c69b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
