Change-Id: I8113d7dd4e7967d020d59a5b4104e8366d55283c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Needed for qtcoap, otherwise AUTOMOC doesn't run moc
on qcoapnamespace.h.
Change-Id: I4ca43fcbbc5db6163f9f9f788b920eae86f5b174
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake, the header files used for private symbol versioning is done
via
private_api_headers = $$SYNCQT.PRIVATE_HEADER_FILES $$SYNCQT.QPA_HEADER_FILES
So we must do the same with CMake.
Change-Id: Iaebeb13592241b6c4d89f70d2e6ac3ebfb374207
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
BUILD_EXAMPLES and BUILD_TESTING are supposed to be defined via arguments
when executing cmake. The current text does not make that clear. Change
the wording, so that it matches other places in the document that explain
which cmake arguments to set when.
Change-Id: I058cf9d6bc7660c9f4820e2a7342bc64e99d6a72
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The if around the find logic meant that the module was never shown as
found after the first round.
Change-Id: I3dd47b37baf7c630c54adbce6872b99f9ff56ad0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Output target was named output_target_quick instead of just output_target
Change-Id: I3ee0598bb61e654e42cb82b84da46f292d87e2cb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Value was not being propagated to the parent scope when set.
This patch also changes OUTPUT_TARGET to OUTPUT_TARGETS since it is
possible that two targets can be generated.
Change-Id: If489a609ed363a319224fcd6c5a4fc878d0d8617
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
They're INTERFACE-type targets and can thus only have whitelisted
properties set. That fixes the cmake configure step for the UiPlugin
target in qttools.
This has the unfortunate side-effect that the headers will not be picked
up for our pre-compiled headers. Although it is not a big issue since we
don't have many header-only modules. An example is QtTools' UiPlugin.
Amends 2cf0ba1fba
Change-Id: If722928f64727ffaf2e9d0746668c0198fa1a647
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Some modules define their own manually-maintained lists, and we can rely
on the headers generated by each module to include in the pch as well
e.g. QtCore/QtCore.
There's also e.g. QtWidgetDepends for QtWidgets, but this only
works for modules, not for tools, examples or other applications.
For now we'll use the Qt<Module>/Qt<Module> headers for the
modules we depend on.
Building with PCH can be disabled with -DBUILD_WITH_PCH=NO, and it only
works for versions of CMake newer than 3.15.20190829.
Change-Id: Iae52bd69acfdfd58f4cd20d3cfa3c7f42775f732
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Ie34c03c409a20546ace1ddc84f8813c1772936f7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If syncqt was not executed for a module, it will not have generated
headers, so we should not propagate the include/${module} header
location in that case.
Change-Id: I6dc0628a11ababb4d237215a9f4d3fc331383848
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
As with qmake, you configure with or without -nomake tests -nomake
examples, and the choice is propagated to other repositories.
Do the same for CMake. It's still possible to opt out to build one
or the other by passing -DBUILD_TESTING=OFF -DBUILD_EXAMPLES=OFF
on the command line, which takes precedence over the value saved to
QtBuildInternalsExtra.
Change-Id: If0fbfa938d88309e7969c9bacc8d0bf86548bf5e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Fix the silly boolean logic error in commit
9c1b7802d7.
Change-Id: I9dd0d3e8be5cbe75583099686a623d81d3dd87fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is similar to qmake, where the .prf files from the source
location of qtbase/mkspecs are used in a non-prefix build.
This means that if a developer changes the source QtBuild.cmake,
and then runs make in qtdeclarative, cmake will reconfigure
qtdeclarative because the timestamp of QtBuild.cmake changed.
Before this change you first had to make && make install in the
qtbase build directory, before qtdeclarative saw the modified
QtBuild.cmake.
This change also makes the module paths be prepended to
CMAKE_MODULE_PATH instead of appended, which means they will
take precedence to any path provided via command line.
Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't create the plugin config files when doing shared builds, otherwise
for example Qt6GuiPlugins.cmake will try to include the xcb plugin cmake
config, which in turn will perform a full-fledged find_package series to
locate xcb. When an application just uses find_package(Qt6Gui), then
that is not needed.
Change-Id: I1890aaa5be8e214151c65fa981f547a73c0ca7fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
QtUiTools in qttools is a public module that has only headers, so it's
an interface library in cmake. That means INTERFACE_INCLUDE_DIRECTORIES
cannot contain paths to the source or build directory, unless they are
prefixed with BUILD_INTERFACE, which this patch adds.
Change-Id: I047700f447237dfbe5a901072eb413a159ae537d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fix up the previous commit and use separate COMMAND parameters for
add_custom_command to ensure the expansion of the PATH. The injection
via -E env "/some/dir;%PATH%" does not work as the dollar expansion is
not applied when the ninja command uses cmd /C. This relies now on
undocumented behavior of cmake ;(
Change-Id: I5b5fc88e4c13f8fb6c6bba3131204c2eb35404d6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our tools are typically installed into the Qt bin directory, after which
they are useable right away on Windows, since the Qt dlls are located
there, too. An exception to the rule are tools that are built within a
module and used right away. At that point they are in the top-level
bin dir of the build directory, along with "local" DLLS they might need,
but with the Qt dlls out of reach. To cover this case, we need to
prepend a PATH adjusting command when using these with
add_custom_command.
Change-Id: I7f58581f5060c8004b5d1fa1f6f17297256783de
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Do not build examples in static builds as they are not prepared
for this configuration.
Change-Id: Ia0fd0a6cdfa3733bf13eb2ca8398668f26c0bedf
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the ICC configuration we can't build the qtbase libraries with ICC
and qtdeclarative with gcc, mixing won't work well. On Windows we've
covered this compiler mixing scenario using our toolchain file, but the
ICC case makes it clear that we have to be consistent about caching the
compiler in the toolchain file across platforms.
Change-Id: Iad2005ab00655f902e5f5cea2f0563d790d8aa93
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I8cb97afaaed46ee64b5a133e797179d7ddecdeef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building QtQmlDevTools we don't generate syncqt headers, but the
non-existent include paths were still added, which means that anything
that used QtQmlDevTools would fail to configure (the standalone tests).
Make sure to only add the include paths if syncqt was executed.
Change-Id: I6d79ecf53e9a5d396e8df801584ce2c9f119f9be
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Whenever the qml compiler is used to process qml files from a
resource, and there are no resources left after all qml files have
been processed, make sure to propagate the created resource target
to add_qt_resource, so that the target is associated properly with
an export name.
Additionally the generated qml cache loader file uses private Qml
headers. Thus the object library that contains the cpp file should
have qml as a dependency (and not the target that will link to the
object library).
Change-Id: Ib385a900823df3e015492cdd06acd8a0cb9f8e9a
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Override the default binary path for qmlimportscanner so that it points
to the host build specified via QT_HOST_PATH.
Change-Id: Ib0b47e61315c87ce6225e2d8ca84043cae03357d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update Android build configuration to be compatible with the multi-arch
android build patch to qmake. We can now build and generate the apk
correctly. Executing on the device/simulator will only work once the
latest changes from 5.14 have been merged in.
We now replace target suffix with ${CMAKE_ANDROID_ARCH_ABI}.[so|a] so
we don't have to deal with handling targets which might have any of the
OUTPUT_NAME properties set.
The dependency and deploy settings generation has also been updated to
append the file contents to a string and then do a single file write
at the end.
Change-Id: Id3c5bd0428141ecaf962124a100390e3a4e41feb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qmlplugindump is not build during a Qt static build, so there's no
point in creating custom targets that would run the tool.
Change-Id: Id7d6d44da63312f298f46eab08a5637cb0c97c8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment we only support building with Emscripten, so that's the
system name to look for.
Change-Id: I08782ed0201da1593058bf1fb2ec61d6660802ed
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The first issue is that instead of arg_OUTPUT_TARGET we should use
rcc_OUTPUT_TARGET (there was also a typo in the OUTPUT word).
The second issue came with the fact that the object library targets
that were created for resources had a "Qt6::" namespace prefix in the
exported Targets files, and yet the link generator expression did not
contain the prefix. This failed when building qtsvg in a static build,
because the exported object library could not be found.
The solution is to use the TARGET_NAME generator expression which
takes care of adjusting the name of the target when exported, thus
making the linking work both when building qtbase and when building
qtsvg.
This had the fallout, that all resource object libraries need
to be associated with an export set and installed. This wasn't the case
for plugins, because plugins have an export name of the form
"FooTargets", whereas the export name for the resource object library
is "Qt6FooTargets".
Adjust the export names of plugins to be the same as for modules and
resource library objects (aka contain the "Qt6 prefix").
Change-Id: I1ca28d20c51e4447e5783cc20571a68ec77f6513
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure to document both variables are required when invoking cmake.
Otherwise, one might be omitted causing side-effects.
Change-Id: I3390df1cb5352ea6113952c99fcedef5336f2fc1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* The -no-undefined linker option only makes sense for shared
libraries. The WASM build is a static build though.
* The -gc-sections linker option is only relevant for host tools
and certainly applicable to the WASM toolchain.
Change-Id: Ib8daec66a6d80f5025887448882dd891e6176268
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is a simple mis-understanding between try_compile assuming interest
in the launching part of the thing we try to compile and our
architecture test being interested in the binary.
Change-Id: Ie972b662b6f34699f566649bb2c1e29da35b58c3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing qml root path variable in the deployment configuration file.
Not having this variable will cause androiddeployqt not use the
qml dependency scanner to package all relevant dependencies.
This patch also fixes QT_ANDROID_BUNDLED_FILES files not being
processed.
Change-Id: I5bca33cdbb57098f283b38516b777571806da9e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Assume that interface libraries can't have plugins for now, otherwise
we'll need to change the "MODULE_PLUGIN_TYPES" property name to
include INTERFACE_ as a prefix.
Change-Id: I21b64179ded5fd10216d843a21ee149e002793f3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
From all the observed cases, the parameters given to OUTPUT_DIRECTORY
tend to be CMAKE_CURRENT_BINARY_DIR, which was the default value. This
change is mainly to avoid add_qt_test failing if OUTPUT_DIRECTORY is
specified.
Change-Id: I26b931dd33ad1e991b64c14cc11b4b7a713fc858
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Prevent the quick compiler running on embedded test data for platforms
such as Android. This breaks certain assumptions about the test setup
otherwise.
Change-Id: I1026da3e16552256623de26b843ea32ed2c4260e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On android test data is embedded into to the binary via resources. This
will not work with sourceless tests such as the qml only test cases.
Change-Id: I3ecf28223b3c7c6dae4ca3f15519adc028082598
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
When using the quick compiler to compile qml files, add an explicit
dependency on Qml. This will result in linker errors otherwise.
Change-Id: Ib7af0e8ec1b48822fd0d3c3556f10d24f10e7489
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also add support for modules that have no private module counterpart.
Both are needed for Designer's QtUiPlugin in qttools.
Change-Id: Ia7e9d8837140e1de5cd59e196b4f63481ab68298
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Specifically what each of the list variables in
qt_internal_create_module_depends_file is used for.
Change-Id: Ie4f8c0d7387308518932d37e802ecaeb0572b955
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
The content of the generated header files should reference both public
and private Qt module dependencies. This is the same as what qmake
does.
Change-Id: I2e47c93291d677b86af7bb80fb788b2acf939743
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In some places of the build system we need to iterate over repo specific
Qt known modules (aka the ones that are built in the current project).
In other places we need to iterate over the whole list of known Qt
modules (those found via find_package + the ones built in the
current project).
Introduce two separate functions that provide access to either the
former or latter, and adjust all existing usages of QT_KNOWN_MODULES as
needed.
Change-Id: Ica96d0cfe690b9aaaa3f8c53bc84975bccad69c7
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
When building tests for android some resources names had the "#"
character in them which triggered a CMake error when use in conjunction
with add_custom_target()
Change-Id: If5f471eebb027683e86b0c4e38c2f34ff8891b7a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing required resource prefix to add_qt_resource() call when
embedding test data as a resource.
Change-Id: I9130f9ae863daae80221a1475b077b1d2e501f6d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch moves all of the underlying code for add_qt_resource
into a common reusable snippet for both the Qt build and user projects.
For users, the new API is available under QT5_ADD_RESOURCES. If
outfiles is a CMAKE target we will use the new API, otherwise
we will fall back to the old behavior.
This patch also adds EXTRA_CMAKE_FILES and EXTRA_CMAKE_INCLUDES to
add_qt_module so that module specific cmake files can be installed
and loaded by the module's config.cmake.
The code will be installed under CMAKE_BINARY_DIR/Qt{}CoreResource.cmake
and is injected into Qt{}Core_Config.cmake via the extra cmake includes
passed into add_qt_module.
To make sure it still works with QtBuild, we do the actual generation
of the file from QtBaseGlobalTargets and include the generated file
there as well.
Change-Id: I85fefaa11dde01a6790d23c62d6a64cd157e2617
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This condition was not being properly evaluated since the cached variable
was treated as a string. Any checks with if(QT_WILL_BUILD_TOOLS) would
just verify whether the string was empty or not.
Change-Id: Ie8b9ecc8249a1e9f5c0aa1b13d5bef686fcb04de
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building qtsvg or qtimageformats there are a bunch of
configuration warnings like:
The plug-in 'qtiff' does not belong to any Qt module.
This happens because qt_get_module_for_plugin() checks for modules
only in the QT_KNOWN_MODULES variable. find_package()'d modules
will not appear there though, but only in
QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE.
Change the function to check for Qt modules in both variables.
This fixes all the warnings regarding plugins not belonging to a
module.
Change-Id: I39e668801a93794b62888cf868b97c55f57dccdd
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I don't know why, but previously the test data was copied to
"test_build_dir/testdata" subfolder. That's incorrect, there's no
need for a testdata subfolder, the copied / installed contents
should go directly under the test build dir / install dir.
Incidentally this will make the corelib/io/qdir tests to pass.
Amends 1307736c7d .
Change-Id: I9e180d608433fe82f4a29afea7f594507e6020d3
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Teach pro2cmake to use add_qt_test_helper instead of
add_qt_executable when the qmake 'qt_test_helper' feature is used.
Don't use macOS bundles when building tests on macOS, because that
breaks path assumptions for certain tests.
Introduce a new OVERRIDE_OUTPUT_DIRECTORY option for add_qt_test_helper
that allows placing the binary into a folder other than the test parent
folder. I considered changing the default behavior not to place into the
parent folder, but that would break all existing tests, so I opted for
override approach instead. Ultimately we might want to revisit this
later.
Change-Id: I68fd1dea608333c2af0d3896050b40a6964dd87f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename the alias property used by add_qt_resource() to QT_RESOURCE_ALIAS
to match property naming conventions.
Change-Id: I97b12b0b794e158f03dabeed5ec23a3b7d56cfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Support translating the QTQUICK_COMPILER_RETAINED_RESOURCES variable.
Fix missing PROPERTIES keyword for set_source_files_properties() commands.
Apply source file properties to standalone source files as they appear
in the project as it was possible for them to inherit values that were
not meant for them.
When creating resource lists, prefix them with the resource name
to avoid collisions.
Change-Id: I69ef85ea9414c0e7c07b1ebfb76d24bd878ce70f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When pro2cmake converts qrc files that are located in a subdirectory
there is an error in the resource paths for qrc files generated
with add_qt_resource().
For instance, consider the contents of data/scenegraph.qrc:
<RCC>
<qresource prefix="/qt-project.org/scenegraph">
<file>"shaders/24bittextmask.frag"</file>
</qrsource>
<RCC>
After processing by pro2cmake and add_qt_resource() we generate
<RCC>
<qresource prefix="/qt-project.org/scenegraph">
<file alias="data/shaders/24bittextmask.frag">
${CMAKE_CURRENT_SOURCE_DIR}/data/shaders/24bittextmask.frag"
</file>
</qrsource>
<RCC>
The expected qrc path for the resource should be prefix/shaders/...,
but in CMake it becomes prefix/data/shaders/... due to the
BASE parameter.
To fix it we check whether BASE is set and whether there are no
other aliases present on the source file before setting an alias
with the original file path.
Change-Id: If0a68a5ffa787704b10b740e20f875c9029509b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Export the architecture configuration variables from QtBase. There are
other modules that require access to this information in order to
enable certain features (e.g: qml_jit in QtDeclarative).
Change-Id: If2c7f29ccb1c0b0a0db3d78ad133a2a6be12b5ad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Added substituion rule to qt_internal_module_info to replace '.' with
'_'. Fixes compile errors for targets with names such as Plugin.2.
Change-Id: I0754c771bdc456a8a8f450fba90792c98d276c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We now compile all qml files from the quick compiler in separate
directories qmlcache/${resource_name} to prevent issues where the same
qml file is present in more than one resource file.
Change-Id: I6857ff6aaaa21112896d5d39bbe11d3ffe524ec8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If the variable resource_files existed in the parent scope, the list
would now be duplicate.
Fix case where TO_CMAKE_PATH didn't properly convert //Foo into /Foo,
so wee need to handle this manually.
Change-Id: I73f1b4db82f6a80ba00da928b39091ac6c968a02
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change makes the PREFIX parameter a required parameter if the
target does not specify a default. This way the behavior is clear when
reading the code: add_qt_resource() without PREFIX means it must come
frmo the target.
Change-Id: I79024e70e7b4d32a5164b93aa08ec9ff409b2d39
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
* Add support for a QT_RESOURCE_PREFIX target property, that
add_qt_resource respects. This makes it convenient to add files
to the resource system for a project without the need to repeat
prefixes. In qmake land with multiple resources they're repeated
in the foo.prefix variables or in the prefix attribute in .qrc
files.
* Since /qt-project.org/imports is in the default QML import search path
and the hierarchy under the import search paths is "regulated",
we might as well make add_qml_module set QT_RESOURCE_PREFIX on
the target. We can compute the correct value for that. This
allows removing the redundant prefix from the add_qt_resource()
calls for the qml files.
Change-Id: Ic15130dc9e432340fc3edf93e35f2a803b4b40eb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
There was a missing dependency rule which would cause the generated cpp
file to not be updated when changes were made to a qrc file generated
through add_qt_resource().
Change-Id: I9544c2fb6cf49529913f731b8fb6fc524d65e40c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Detect this in the conversion script and map it to a source file
property. When that's the case, avoid repeating the file list but
instead store it in a variable.
Change-Id: If3119d83914bb798766e27351746b4e867bd3ab3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Minor tweaks to make sure QML test cases without source files work as
expected.
Change-Id: I30b72622692b8f36d01f7a17b9d1456b0ab223ea
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
File passed into add_qt_resource are check to see if they match valid
qml files extension. Those which match the latter are then processed
by the qt quick compiler should the qmlcachegen target be present. We
also ensure that any remaining resources are properly chainloaded.
If the qmlcachegen target can't be located a warning be will be
issued asking for the inclusion of QmlTools in the find_package
command.
Change-Id: Ieecd38670e15c21d94dc549b31c7d87f2383d9af
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
While trying to port qtgraphicaleffects, when trying to configure
the project with a non-prefix build, the configuration fails with
the following error:
CMake Error in src/effects/CMakeLists.txt:
Imported target "Qt::Qml" includes non-existent path
"../qt_cmake/qtdeclarative_built_developer/include"
This is because we incorrectly export public include directories
that point to an "/include" folder under the repo build dir, whereas
in a non-prefix build the syncqt "/include" folder is actually in the
qtbase build dir.
Fix this, by introducing a new variable called "foo_repo_include_dir"
which will point to the correct include directory regardles of prefix
or non-prefix build. This variable is set by qt_internal_module_info.
Fix all relevant places to use this new variable. Also streamline
and remove any unncessary include directories in all our functions,
thus making everything consistent and hopefully easier to understand.
Change-Id: Icbe884701275c7754daecadcdba18048b4d779d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Perform the test whether tools should be built before entering the
source directory of a project. In QtDeclarative this would result in
a configuration error since the tools are used while building everything
under src.
Change-Id: I33ce2cb317ef221836d696654f3bb4e39db47e54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure the URI name for qml modules correctly strips out the version
number for instances such as QtQuick.Controls.2.
Change-Id: I18e706b371323eeefdd6d7564b922265fa5cad3f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The rcc generated code relies on global constructors to register the resources.
The object file of the generated code is included by default in shared libraries
and executables. However when the object file ends up in a static library, the
linker will discard the object file when nothing references any of the symbols
in that object file, when linking the static library into the executable/shared library.
The solution is to link the object file straight into the final target, by means of a
cmake object library.
Change-Id: I02ad1173e4f7e8f907022c906640dc9086233676
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to the missing argument processing on PUBLIC arguments we could
run into situations where the defines for an executable (mostly tests)
would be incorrectly processed.
If one were to pass a define into a test that also specifies public
libraries, the defines passed in by test would fall under the
PUBLIC_LIBRARIES argument in add_qt_executable.
For instance, in a test with DEFINES Foo PUBLIC_LIBRARIES Core
would cause arg_DEFINES to be "Foo=BAR;PUBLIC_LIBRARIES;Core". This
combined with the defines specified by add_qt_test would result
in the following string "Foo=BAR;PUBLIC_LIBRARIES;Core;TEST_DIR=..."
and would cause TEST_DIR to be treated as a public library in
add add_qt_executable.
For some reason I can't figure out, these two defines end up in the
linker flag section of certain test programs. There is nothing wrong
with the rest of the propagation chain into add_qt_executable. My best
guess is that it has something to do with the generators. In any case
add an explicit -D fixes the issue.
Change-Id: I340790c1c2426fa76785d1bd1b3332a904323d56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has been decided, that going forward all qml files are to be added
to a module via the resource system. This patch does the ground work
to make sure all qml modules in the qt codebase follow these new
conventions.
New properties on targets have been added so that we can't track all the
qml related information for later use.
To make sure it is still possible to install qml files we added the
qt_install_qml_files() command.
Pro2cmake has been adjusted to handle the special cases of versioned
qml modules (e.g: QtQuick.2). It will now insert a TARGET_PATH
override to avoid the default conversion from the URI parameter.
Finally, this patch temporarliy disables the quick compiler by moving
all relevant code into a dummy function. This will be removed in a
follow up patch where the quick compiler will be enable for all
qml files present in resource files.
Change-Id: I09fe4517fad26ec96122d9c7c777dbfbd214905c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds support for the qtquick compiler feature, which
will embed the compiled qml files as resources along with the
respective qml_loader.
This patch also changes the add_qml_module call to require either
EMBED_QML_FILES and/or INSTALL_QML_FILES to be specified.
Change-Id: I32d29c9b554b8286ed3b980027a56dd4abe11c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure that the .qml/.js/.mjs files are copied or installed into
their target destination.
Change-Id: Ib1649e5168c9fe3a570800af92d82293e5b295d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
When building qtdeclarative against a static iOS qtbase build,
QtNetwork is find_package'd twice, once in the top level
CMakeLists.txt file, and once by the qtuiotouchplugin which has
Network as a dependency.
This meant that the static plugins that Network exposes had
auto import cpp files generated twice, which failed the configuration
of qtdeclarative.
To fix this, don't generate the same file more than once.
To do that, protect the inclusion of the FooPlugins.cmake file, to
only be included once in every directory scope. That can be achieved
by setting a variable to TRUE when the target does not exist yet.
If the target exists in the same scope, that means that find_package()
was called a second time in the same scope, so there is no need
to include the Plugins file.
Change-Id: I9d7c3e7b7c22c2b4526cf1d717b9d15919f213f3
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When cross-compiling qtdeclarative, add_qt_tools makes sure to import
the host tool and not build it. But there are also some
extend_target and add_qt_resource calls which try to extend the host
tool.
Make sure to protect those functions not to do anything if they are
called on an imported target.
Change-Id: Ifd8bcab8e56ad389a8c145382b23bd2c1bda5e81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After re-arranging subdirs, the cmake target level dependencies can
handle building qmlcachegen before running the custom command for
generating cache files.
Change-Id: I8a35b2b5bfd2fdf4b49462ff9c27e5f3075254fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure to handle glob expressions in the entire path given, not just
the end of the path. This handles tests like qsslkey and qnetworkreply.
Also copy/install the testdata in the final test directory path under
a "testdata" subdir.
Previously INSTALL_TESTDIR was used, which was never set to anything.
Change-Id: I2408e12f586cadeb524ffa249e851a4179324b23
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
This patch adds support for qmake's qmlcache feature. It's enabled
when option EMBED_QML_FILES is not present in add_qml_module.
Change-Id: I9b35f0bda7dfaf777f55c14eaf3d763f9b550fa4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some projects in QtQuickControls force the qml files to embedded into
the binary. This change exposes an option to mimic that bevhavior.
Change-Id: I4cbf0c21c05ca03b8dd1189eb7d81e43279c7157
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extend add_qt_test for qmltest by setting the option QMLTEST
when we detect the config qmltestcase.
We also forwards the GUI option to the tests when detected.
This is a requirement for some QtQuickControls2 tests.
Finally when doing a prefix build, we add the install directory
to the QT_PLUGIN_PATH environment variable.
Change-Id: I3b2ecb494955976e98abbcf3d03925c314336122
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure that paths passed to qt_copy_or_install are prefixed with
QT_INSTALL_DIR so that they behave correctly with prefix and non-prefix
builds.
Make sure that plugin.qmltypes and qmldir are also copied to binary dir
when doing prefix builds to match qmake's behavior.
Change-Id: I6f87ed478e797c9f66dbf85264904ad29a60ad95
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
The build failed due to two different reasons.
We tried to assign properties on an aliased target, which does not
work. Make sure to set properties on the original unaliased target.
We tried to query for the value of the QT_DEFAULT_PLUGINS property
when automatically linking to plugins, but the generator expression
failed in the AND section, because querying for an unexisting value
does not return an integer, and the AND expression expects an integer.
The fix is to wrap the relevant expression in a BOOL generator
expression.
Change-Id: Ia065bc1de939cee49e5de0b2aef70e356cc5419a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Some author warnings don't make sense when dealing with QML
plugins, like the messages regarding CLASS_NAME or not
belonging to a certain module. Take care not to print those
warnings in those cases.
Change-Id: I017bd63cca650dc262337949242e813b7b6a56cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QT_WILL_INSTALL was previously always set to ON when doing a
qtdeclarative build, because
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT evaluated to false due to
always having to set CMAKE_INSTALL_PREFIX to point to the qtbase build
directory.
Instead of recomputing the value of QT_WILL_INSTALL, compute it once
while configuring qtbase, and add it to the generated
QtBuildInternalsExtra.cmake file, so it propagates to all other repos
that will be built.
Change-Id: If8bf63e7501b5758fe7aa0f799cb0746704f4811
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reduce the amount of code required to add a qml plugin to cmake
by making add_qml_module wrap the add_qt_plugin code where required.
add_qml_module will also create a dummy target so that qml files
will appear as source files in an IDE when no cpp files are present.
CXX_MODULE qmake parameter has been dropped in favor of an
explicit IMPORT_VERSION parameter, since it was only used to
determine the version when the IMPORT_VERSION was not specified.
Change-Id: I4a4b626566720d04c62d246ca521db8c4a95b10f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These changes enable the support to handle test data and install or
package them as resources when appropriate.
This change does not handle the GENERATED_TESTDATA or
TEST_HELPER_INSTALLS since there are very few occurrences of these and
we can handle those as special cases.
Finally, in add_qt_test, only append CMAKE_CURRENT_SOURCE_DIR if
the path is not absolute.
Change-Id: Ic20b9749d10e2a09916f2797606116471c64850b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add the necessary code to both the QtBuild and pro2cmake to be able
to handle qml plugins in qt declarative.
Add condition replacement for QTDIR_build to QT_BUILDING_QT so that
certain qml examples work correctly when being built in the build
directory.
Fix add_qt_resources not being updated during build after changes
were made. Files list used as dependencies were not populated.
Add missing module mappings for qtdeclarative.
Change-Id: I0f71d0a3a0e7e97ba96807950d11cffaee04d9b2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
f66c1db16c in qtbase introduced a new
macro that the moc scanner has to look for.
Set an explicit list of macros to look for in the
CMAKE_AUTOMOC_MACRO_NAMES property of every target that has AUTOMOC
enabled, otherwise CMake AUTOMOC won't run moc on files that contain
the new macro.
Change-Id: Id991a70d773cef66716621803a88e96b44a80650
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is done by adding a DEFAULT_IF argument to add_qt_plugin, which accepts
if-evaluated expressions.
e.g.
add_qt_plugin(myplugin
DEFAULT_IF ${foo} STREQUAL ${bar}
...
)
so that this mechanism can be reused later if necessary.
Change-Id: I7eba9adaaa28e55a4f0f94cf206e868b990027e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the cmake install prefix was added twice during a non-prefix
build, which evaluated to an incorrect path.
Set another absolute dir variable, and use that instead.
Change-Id: I73099510dadc8f401d5a763f21840c9671686c10
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Add QtAutoDectect cmake which has routines to handle the vcpkg detection
as well as set up some android configuration parameters. The latter will
contribute towards keeping the cmake configuration commands shorter when
targeting android.
Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Update the cmake README file with explanations on how to target the
other available Android architectures.
Change-Id: Id7653abc4a1a6fbb96797014ce2ca2e6bb49943d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Mixing compilers won't work well on Windows, so if qtbase is built using
cl.exe and Ninja and then later cmake is called on another module and
gcc is found in %PATH%, then cmake will prefer that. Let's avoid that.
Change-Id: I8294482939efa6a16e0a4df8df3aeef8243c3657
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The run_config_test_architecture() function in QtBaseConfig was not
working correctly as we were not updating the length of the line
properly.
Change-Id: I29c5b45f1fa36d16cb2ef00950feb80987f6b176
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to save them in the toolchain file, otherwise we can't compile
anything :)
Change-Id: Ic5c53524fa4aa05d0b3229c2905dff92ca437ec1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt
tool. This will ensure all the right plugins and dependencies are
packaged when generating the apk.
This change also changes the visibility for executable to default/public.
Not having this will cause the application to crash as we can't locate
main() in the executable (shared library).
Additionally pro2cmake conversion script has been updated to perform
the required conversions for the Android settings.
Finally, the 6 projects in QtBase that have Android dependencies have
been updated with the new script and the step that produces the xml
files in run at the end in QtPostProcess.cmake.
Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Similar to the shell script, this makes it easier to invoke cmake by
just extending your PATH.
Change-Id: I1f83e93c507032f6ecf4838c11d62f49f4d93ed6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Just like with qmake, separate the two "features".
Change-Id: Idf2a796c7c4aaa740c471688b2221d7041fed643
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For ICU we have multiple components, and ICU becomes a public dependency
to QtCore.
When storing the INTERFACE_QT_PACKAGE_COMPONENTS property, make sure to
store the entire list of components, not just the first component -- by
turning the semi-colon separated list into a space separated list.
When processing the components at find_dependency time, we need to
reverse that and pass COMPONENTS directly to ensure a correct parameter
expansion.
Change-Id: I24a0708520e7d5fba039395a151034aee4d4c0e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Add labels so that ctest --print-labels and ctest -L <label> gives
insight over the test plan and the ability to run easily individual
tests.
* Unfortunately we can't do the TESTARGS indirection for arguments as
coin does with testlib, so instead pass the parameters to generate
the xml unconditionally.
Change-Id: I289de9c15c516e3ac3fe04771fdbd8d7a083ff1f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to scoping this variable needs to be written into the cache.
Change-Id: I2704fe9ac138210571e0b7acada5eb5c65e265af
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The current state of qtbase is confirmed to be built with no warnings
when using up to Xcode 9.2, as per the check in
mkspecs/features/qt_common.prf. Add the same check for the CMake
build.
Change-Id: I0c2409ece048e93fba29c41a8bd053dd112949bd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When cross-compiling we take a shortcut in add_qt_tool() for moc, etc.
as the tools are already imported from the host build of Qt. However we
must still add the tools as a dependency in for example QtCore so that
when the cross-compiled QtCore is used, the host tools are implicitly
imported.
Change-Id: I83e4fd7f21e18472c0965c90c058dd2b55b6ec65
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When the host system uses 64-bits for pointers and the target 32-bits,
then locating the tools dependencies would fail due to the mismatch.
Since the tools dependencies don't create linkable targets but merely
import executables, we can skip this check like in commit
914b367c7f.
Change-Id: I1ebd0867e4cce34f42df21dc8e8d9176a83a9cac
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This gets us a step into the direction of convenience that qmake
offered:
* QtBase is configured with a long command line (especially when
cross-compiling)
* Afterwards application developers (or other module builds) can
just use qmake && make
By generating a toolchain file we can capture vcpkg and toolchain
chain-loading and a shell script can take care of providing the prefix
path.
Change-Id: Ided81f5432cab862306f2bea86cfe8e56adf71b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
add_library(MODULE) creates libraries with .so extension on macOS,
but Qt plugins should have the .dylib extension.
Change-Id: I603e7abfb9d5b78c0c8ea526f9fe995bf36c3a50
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
All the other PlatformModuleInternal, PlatformPluginInternal,
PlatformToolInternal target will depend on the common one.
Also add the QT_NO_DEBUG definition when the build type is not Debug.
This fixes the lookup of the Qt platform plugin on macOS, which
uses a "_debug" prefix in the plugin name depending on if the
QT_NO_DEBUG definition is present or not.
This is the same as it is done in mkspecs/features/qt.prf.
Change-Id: I82cf461d44b8a3b3c5dc2b2d9f25baa246fc1e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We want our libraries to end up in the same bin directory, not inside the
Debug\ or Release\ sub-directories. Their distinct names avoid a clash.
For our tools such as moc, uic, etc. we need to place the release build into
the bin directory explicitly, as by default multi-config generators place
binaries into the Debug\ or Release\ sub-directory.
This is also needed as cmake's automoc itself expects moc to be in the
bin directory.
One effect of this is that with a multi-config build, it is always necessary
to perform a release build first, otherwise the debug build won't find moc/uic.
Change-Id: I1361823ddf5961a5f1bb517e4bca69e621cbce9e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If VCPKG_ROOT is defined, let's use it and chainload any previously set
toolchain file. The detection of vcpkg support via the VCPKG_ROOT
environment variable is per vcpkg documentation, the automatic
chainloading is something specific to us.
Change-Id: I0498effc5b948f0b6f5e223d0454a15a0cbb503a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As per vcpkg documentation, this is a tweak that allows respecting the
vcpkg default target triplet environment variable, which simplifies the
command line slightly.
In order to make this also work for modules other than qtbase, we're
going to need to consider the creation of a toolchain file.
Change-Id: I2573f6644d671c710fd823df83e2205dbbfe19e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Remove the special case in QtGui and instead handle this in a generic
way so that QtPrintSupport is covered, too. For now we do this in the
same function where we run the regular target install() commands. It
doesn't quite fit into per-target PUBLIC_HEADER or PRIVATE_HEADER
properties as the qpa headers sit _next_ to public and private in a
separate qpa sub-directory.
Change-Id: I30aadaf9496cf0236f39a7c36a5163e4270edecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Always install - not installing doesn't make much sense.
Add information about developer-build.
Change-Id: I406d007e9b167ee83d126ffa6e78235743402c33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
Builds fail on Windows, due to splitting on ':' on absolute file paths,
when handling syncqt injections.
Revert for now to get qt6 merge in faster.
This reverts commit 7559d508d1.
Change-Id: If139a8a1eb4ae7ccc8d7b835b12e83b03176e28b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In case of a CMake superbuild, the actual install root in a non-prefix
build is the top-level build directory (not $TOP_BUILDDIR/qtbase anymore).
This is more in line how CMake lays out things by default.
Task-number: QTBUG-75582
Change-Id: I4e1744b5c877508fedc33e237eec28cb7436010b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
in qt_build_repo().
This is important for qtdeclarative for example, which builds QmlTest
functionality in ./src, and thus needs Test lib to be available.
Change-Id: I84326d79844526f2f177c19de30bab0c858773e3
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of doing it just in qtbase/src, we need to do it
for all repos before building ./src.
Change-Id: I57f226b849cd5370ffbbbea8a694697d400957a4
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
The GlobalConfigPrivate target should also be filtered out when
registering target dependencies, because there's no standalone
Qt5GlobalConfigPrivate.cmake file.
Amends fbfa067a30.
Change-Id: If89732bc2fd004b9644959f71339e22210483d7c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were a few issues:
- Third party dependency info for plugins was not generated,
because the depends and public_depends variables were not fetched.
This caused issues when trying to use the qcocoa plugin in a
consuming application, because Cups::Cups was not found.
- Privately linked libraries in extend_target were not considered when
generating dependency info for modules. This caused issues in
QtThemeSupport, becauese it could not find Qt::DBus, due to that
target only being added as a private library in a conditional scope.
- Make sure to handle privately linked internal modules like
PlatformModuleInternal to map to the Qt5 package, because there is no
standalone package for it.
Also remove a TODO comment that says that qt_register_target_dependencies
should maybe be called in extend_target. That's already the case.
Change-Id: Ie99c52e800cd89e6f82008f1e38f4da5cd602929
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
In Qt 5, the Qt5Core target was extended by Qt5CoreConfigExtras.cmake to
have a generator expression as interface linkage that would
conditionally link WinMain.
This patch implements the same through regular interface linkage right
in corelib. Since the linkage happens through a generator expression,
our dependency generator does not see this as a dependency. Therefore we
add this as an unconditional package dependency for corelib, on Windows.
In theory this could be done also in winmain's CMakeLists.txt, as
targets can be extended outside of their directory. However this adds a
directory id (WinMain:@<023423>) to the linkage, which mysteriously is
not removed on the exported core target.
Change-Id: If2abb9ba790f51274f582c9ec28c13d968b84302
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Commit abe12f600b moved the
_LARGEFILE64_SOURCE define to a central place and commit
449eee2d10 made it conditional to UNIX
(not WIN32). Somehow these two were left over though.
Change-Id: I23b08e84db804e9d5a4dde706af501c0918b460e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's already installed right where QtSetup.cmake is installed.
Change-Id: Ie88363ae3878cda8f92aa44160333886f64565d8
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the android deployment settings json for android apk
targets. QtPlatformAndroid is now also deployed as a public
build dependency of QtCore. Some minor refactoring has been
performed to the naming of variables and functions to
better match the public facing apis.
Extra settings for the file can be configured using the
following target properties:
set_target_properties(Core
PROPERTIES QT_ANDROID_DEPLOYMENT_DEPENDENCIES "foo;bar"
QT_ANDROID_EXTRA_LIBS "foo;bar"
QT_ANDROID_EXTRA_PLUGINS "foo;bar"
QT_ANDROID_PACKAGE_SOURCE_DIR "/foo/bar/"
)
The file is generated using the function
qt_android_generate_depoyment_settings().
We need to install the android template files and jar
files during the android build as the androiddeployqt tool
wont work if parts of it are split between the host
install and the android install.
Added QT_BUILD_QT variable to check whether we are building
Qt from source.
Finally, we also force the stdlib to shared via cmake
configuration with -DANDROID_STL="c++_shared"
Change-Id: I063c47e11749d56ba4c6f02101dbcc09e1b9fe87
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake land warnings_are_errors is only enabled for specific
MSVC versions, ending with MSVC2015. Presumably the warnings have not
yet been fixed for newer MSVC versions, so we stick with the same
status quo for now.
Change-Id: Idc3741d39c888f77ed324a5eb8c654416591785f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake land, the largefile.prf feature is automatically loaded due
to 'largefile' being added to CONFIG via the equivalent feature.
The prf file is in the 'unix' subfolder though, which means that qmake
doesn't load it on Windows.
We need to do the same, otherwise we get build errors due to the
define being checked in ZLIB headers, and selecting an invalid code
branch on Windows.
Change-Id: Ibe9202a639754927262bb8aaa28289934f2e23ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed for QmlDevTools in qtdeclarative.
Change-Id: I41adec15f292c91192e171b45d1e5d48764c37c4
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed for qtdeclarative, to automatically start building
the tools if needed.
Change-Id: I3cbe129e8bb6fa8572a8e34fd3653b51727cb244
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move flags/options that we use for modules from add_module to the new
platform module target.
Change-Id: I89e414690336dcd37253432fe5116226d1c8dd82
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
extend_target.
In extend_target(Foo) we go over all the ModulePrivate dependencies
to assign them to FooPrivate. To do that we use the QT_KNOWN_MODULES
variable.
The problem is that the variable gets reset when we build a new
repository, so when we build qtdeclarative, QT_KNOWN_MODULES has no
entries for Core, Gui, etc, but only Qml, Quick, etc.
And yet QmlPrivate has to depend on CorePrivate.
Change the module Config.cmake files to append their target name
to a global variable called QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE.
The global variable gets populated every time find_package(QtFoo)
is called.
Use the union of QT_KNOWN_MODULES and
QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE when considering FooPrivate
libraries.
Change-Id: Ibd9449744478cea58eb5d9737cc8887b4df92420
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Added qt_examples_begin() and qt_examples_end() macros to setup the
example list so it can be re-used in other projects.
When cross-compiling, we also need to set
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package()
to work correctly.
Removed support for building the whole qtbase/examples folder as a
standalone project. Building examples is only supported when building
the whole of qtbase (qtbase + examples together) or each individual
example is built separately against an installed Qt version.
Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move the include of the platform from QtPlatformSupport to QtSetup. This
no longer causes compile tests to fail since they expect explicit
include paths instead of using CMAKE_MODULE_PATH.
Change-Id: I9d3bed7845104d84422afb5a976ec14b111d259d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't try to report an installable public module .pri file for internal
modules.
Change-Id: Ide6a50420e0b5448b141c842df4c891baca4a9d9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Link to them from add_qt_module/plugin/tool
This way we set the warnings_are_errors flags just once
and also non-qtbase modules get them
Change-Id: I2b65a81694aaebdd7c886249f217c11f79492bad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
... in superbuilds. PROJECT_SOURCE_DIR points to the wrong directory in
that case.
Change-Id: Ic0cba254734c4693b418dd8a0d8e77063914a9de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate a pri file for public and private interfaces, but map CONFIG +=
internal_module to a cmake option and skip the former if set.
Task-number: QTBUG-75666
Change-Id: I3f4baf1277094f4c22149a9e8769734baf9a235f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Enable building androiddeployqt when performing host builds only.
Added QtPlatformAndroid.cmake to locate Java and the setup the
android SDK platform when building on android.
Install the androiddeployqt support files when performing a host
build.
Added ANDROID_SDK_ROOT configuration variable for specifying the
android sdk directory.
Generating the deployment-settings.json will be done in another
change.
Change-Id: I1bf15315af4ed904d2fb1d22b0e8e834df32d6ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Mimic the behavior in the qmake build system, and by default build
tests for developer-build, and not build it for a normal build.
To do this, we define BUILD_TESTING with the right default before
including CTest, which does otherwise define the option itself.
Change-Id: Ifa1b1156477919abc1e916ccd9e1e0a74e969ee6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
for modules, plugins and tools only (i.e. no tests nor examples)
this mimics the qmake behavior
default value is developer_build
Comes with some fixes in qmake since it seems in the qmake built it was
not having Werror, now does because we built it with add_qt_tool
Change-Id: I6f3237f25a6fedefa958644929e90f13837a12df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This mirrors what happens for qmake. qt_plugin.prf does not
define these, but qt_module.prf does.
Change-Id: I742d3c766f6f4bd129fa6ccf85b5a67c6758e819
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This was added to the qmake build system in 220028d37c
Change-Id: Ieee8b4d47b8f9716c14c85cf3038f1074ee8c46a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
targets. This created issues when trying to build standalone examples.
Change-Id: Iaaea2b537793ae25fbf3143cc205574446aa4ad1
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
The WrapPCRE2 package handles the PCRE2 packages that have targets,
and reuse them.
Change-Id: I24b0b51f507703cd8287f845f7e425f62dd2c3d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise when compiling qxcb-glx-integration we would get a warning like
<command-line>: warning: ISO C++11 requires whitespace after the macro name
because -DQT_BUILD_QXCB-GLX-INTEGRATION_LIB is not a valid define name
Change-Id: Ie8cef93a47b14d75eaad77893f7182e1514dd616
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We introduced WrapOpenGL to link against either desktop GL or GLESv2
depending on the GL feature in QtGui. This works "fine", with two
caveats:
(1) find_package(WrapOpenGL) must be called after
find_package(Qt5Gui) in order for the feature check in
FindWrapOpenGL.cmake to work. That's error prone.
(2) More and more places are popping up, in particular examples,
where GL linkage is required due to inline functions in Qt that
forward to GL functions - such as on Android.
This in particular explains the qmake behavior of making the GL
linkage (desktop _or_ GLES) a public dependency of QtGui, so only
Gui linkage is required.
Those two aspects combined are the nail in the coffin of FindWrapOpenGL
and it would seem much easier to simply make the Desktop GL vs. GLES
decision once in Gui's CMakeLists.txt and let Qt5GuiDependencies.cmake
propagate this well. This allows us to get rid of plenty of special
cases as well.
Change-Id: I3a7e8af49537ce5f215f24470e075a4ae9aeb944
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some features check for module / target existence. Adapt conversion
script to handle that.
Reland after fixing it.
Change-Id: If4fb942c2e0d16e76a0b9b767bf478527851b0f7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In particular, Qt targets extended with other qt targets
(eg. Qt::VulkanSupport or Qt::LinuxAccessibilitySupport)
after the first add_qt_module were not taken into account when generating
Depends files.
Note that this patch updates the minimum required version
to CMake 3.15
Change-Id: I747deedd4d59e385876bc1a834ef9bdb6078911b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It breaks some conditions, and then the build fails not finding
some private header files in qpa, etc.
This reverts commit 35dc8f496d.
Change-Id: I1b51eac06fe9186181d3f0a7c78f22da7be534e2
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some features check for module existence. Adapt conversion script
and QtBuild feature condition parser to handle that.
Change-Id: I063e49a6fe9f8e9cf3aec985fd78ed4430398586
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
so they are actually set for all the targets
and that the code is a bit simpler
Change-Id: I2cd253d0a3cec3f482b868f81e852edfa158d3f1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This fixes the build when building qtsvg, qtimageformats, etc.
Amends 0900298d46
Change-Id: Ie732ef6faa99e2ebe7e8da6ee2aa5fc0cf59d3f3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
when largefile feature is enabled, in qmake world
this came from largefile.prf
Change-Id: I064da31328ad46157354c7012c7b8397c558cd1d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Until we have some convenience in place, it is strictly necessary to set
the NDK API level, otherwise the libraries from vcpkg are statically
built against a newer libc headers than what we finally link against.
This also means that we can remove the manual libc linkage again.
Change-Id: If1f2eec4df5ed800ac6b060561edff89236891e9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
CMake will complain if you try to use a plugin in target_link_libraries,
and it won't produce import libraries on windows, or use .so.number
on Linux.
Change-Id: I6f0cf8267b3c0e6e5c888703596afe59b3a39141
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The plugin dll files were missing from install_dir/plugins/
Change-Id: I68655faf949e4b8fcab153c6c9b8ee14d3ad8ecc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
We can't use the gold linker with the android NDK, which is the default
option. Using the gold linker results in linker crashes. QMake builds
also disables the gold linker.
Change-Id: I73de93150b160b4411715007bc7e40238b96d400
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When qt_parse_version_string tries to parse the compiler version into
separate fields, it tries to accommodate for different number of digits
separate by dots by checking the length of the list as it is mutated.
Unfortunately the length variable is not a live variable, so after
removing an entry from the list we must change the length variable
manually.
Change-Id: Ieaeb091581484e8c723fbb467697f73036e64ec9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Dlls were missing from the install_dir/bin directory.
Change-Id: I0b5ef685b779c91969bbfa877f226be2060f6e56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In order for test lib to locate the file requested via QFINDTESTDATA, it
needs the build directory of the test (for example
$builddir/tests/auto/foo/bar) and __FILE__ expanding to a path to the
source relative to this build directory.
With ninja, __FILE__ is a path that is always relative to the top-level
build directory, not the per-test case one. Therefore the path
resolution in testlib fails.
To accommodate this, add_qt_test() now always sets QT_TESTCASE_BUILDDIR
as well as the newly introduced QT_TESTCASE_SOURCEDIR, which, as an
absolute path, removes the need to use __FILE__.
Change-Id: I16c2b0001e38162e6da9fdb1a61f4f8ce634fe46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Hunter has recently added aliased target names that conform with upstream
CMake find module target names.
Extended the WrapFreetype to work with Hunter's freetype (lowercase) package
name.
Change-Id: I0e25f342c6930658f07f05d2e6a58cf94d2d168d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For the android platform library add dependencies on liblog and libc
for every Qt target.
The libraries are shipped by default in the Android NDK so they will
always be present.
Change-Id: Ic4a13be32118710b11effabfb16e27bd2d10809f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit introduces infrastructure work to allow static builds of Qt
to handle importing of plug-ins.
Change-Id: Ife0ca3ca7276ea8ec96fe0eb6adf934fad7620ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Need
qt_find_package(X11_XCB)
in src/gui/configure.cmake since we're using it in the file
qt_feature("xcb_xlib" PRIVATE
LABEL "XCB Xlib"
CONDITION QT_FEATURE_xlib AND X11_XCB_FOUND
)
Need
qt_find_package(XRender PROVIDED_TARGETS PkgConfig::xrender)
in src/plugins/platforms/xcb/CMakeLists.tx since we're using it in the
file
extend_target(XcbQpa CONDITION QT_FEATURE_xcb_native_painting AND QT_FEATURE_xrender
PUBLIC_LIBRARIES
PkgConfig::xrender
)
Use capital XRender in pkgconfig to be more consistent on how XRender is
called everywhere else
Change-Id: I403ead2cc123b08f741c5142f20db88987657ba8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's needed when building QtQml on Windows, otherwise
compilation fails.
Add it as a private define for every module being built,
as it is done in qt_module.prf.
Change-Id: I1e322d1da15adea8b3f037a722b3260a552dfb62
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qtdeclarative has a few conditions that check the gcc version
via variables like QT_GCC_MAJOR_VERSION.
To handle that, parse the CMake compiler version using
qt_parse_version_string() into separate variables like
QT_COMPILER_VERSION_MAJOR, QT_COMPILER_VERSION_MINOR and
QT_COMPILER_VERSION_PATCH. We can then map the conditions
appropriately.
Also, handle isEqual(foo, bar), which is equivalent equals(foo,bar).
Change-Id: I74575c733b44f1f42451e00038b3f113fd353915
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This var needs the cmake namespace as prefix.
Follow-up commit of c5e2838b64
Change-Id: I595306301313b1ff911134776480d28b3194bcf8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Do not set ANDROID_EMBEDDED unconditionally, as that for now is the
least likely configuration and it won't compile when the sysroot is real
Android.
If this gets revived, then it can be done by setting ANDROID_EMBEDDED in
the cache file directly via the cmake command line.
Change-Id: Ic1e1731f981414bd90b89fe91eaf0543a87d8c88
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The warning used to be a fatal error, until we found out that certain
packages might provide optional targets, or provide one target
out of a possible set.
Until we figure out a better way to deal with that, remove the
barrage of warnings while configuring.
Change-Id: Iacf93a997a8f87f81167ac7c4cc991212e7fca5d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Jean-Michaël Celerier <jean-michael.celerier@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We have find module wrappers for various system libs that use
FindPkgConfig. The _FOUND variable will be set to 1 if pkg-config
--exists returned true, but the imported target will not be created when
for example the provided library paths or header include paths are
outside of the sysroot - a good sanity check by cmake.
We require the targets for use though, so therefore we must unset the
_FOUND variable if we can't locate the targets.
Change-Id: Ia0dea657684a1847148664521265c42585890645
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We use
qt_find_package(SQLite3 PROVIDED_TARGETS SQLite::SQLite3)
which intends to find cmake's FindSQLite3.cmake and expects the
existence of the corresponding target. However qt_find_package first
tries to call find_package in config mode, which does not interact well
with vcpkg's sqlite, where sqlite3-config.cmake is provided to support
multi-config targets. So that call will appear to succeed, yet the
expected targets are not there of course.
Therefore this patch adds a sanity check for the target existence and
allows for a fallback to the module mode for find_package, in order to
find CMake's FindSQLite3.cmake.
Change-Id: I660f26c38369c3504df1c590e9d3a51ff1f65c6c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also fix the QT_BUILD_SHARED_LIBS usage. While building qtbase, it
is assigned later than the call for
qt_generate_global_config_pri_file(), so it used always choose static.
Make sure to check for BUILD_SHARED_LIBS as well.
Change-Id: I66f03e5adacc89646147fc96154bee8002b2b9cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We used to copy a qconfig.cpp.in file verbatim.
Add some plumbing to actually compute the strings and their lengths
as it is done in qtbase/configure.pri.
Also make sure to replace the hardcoded linux mkspec with one that is
automatically determined.
Of course both the detection of the mkspec, and the hardcoded strings
for include, lib, etc. should be fixed in the future.
This is a stepping stone to allow building a Qt application using
the qmake built by CMake.
Change-Id: I2e6754f44b20b09b09d14fd85785d56288e6517b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Generate module .pri files
* Generate qconfig.pri
* Propagate MODULE_CONFIG from the .pro files
This enables the basic use-case of simple application builds that for
example use the moc. Omitted from the patch is support for private
module configurations, prl files (should we do this?) and possibly more
hidden gems that need to be implemented to for example support building
Qt modules with qmake.
Task-number: QTBUG-75666
Change-Id: Icbf0d9ccea4cd683e4c38340b9a2320bf7951d0d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Since LINUX is not set when targeting Android, we must extend these
conditions manually.
Change-Id: Ie78167d452e0806bfa64773c1e311a99f4a28f8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We record extra CPU features such as neon, etc. in the sub-architecture
field, which may very well be empty. Allow for that and avoid cmake
warnings about indexed string access beyond the string boundaries.
Change-Id: I63e61c6427d156180039b8ac6f5b0f5f55c36ee8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is meant to keep repo specific functions and macros that should
not pollute QtSetup.cmake. For example QtDeclarativeSetup.cmake
will automatically be included when building qtdeclarative.
Change-Id: I4d26cbb1a7ffafb153a888fc918af337000d5e41
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
The location of the forwarding headers when not yet installed, depends
on whether we do a prefix or non prefix build.
In a prefix build the /include folder should be in the current repo
build dir.
In a non prefix build, it should be under qtbase/include.
But the actual generated files to which the forwarding headers point,
are always in the current repo build directory.
Also syncqt needs to know both the current repo build directory
specified by -builddir, and the output directory specified by
-outdir.
In a prefix build, both are the same.
In a non-prefix build, builddir should be the current repo build dir,
and outddir should be qtbase's build dir.
Also for non-qtbase repo build directories (like declarative),
examples need to have the current_repo_build_dir/include directory
as an include path, so that framework style includes like
#include <QtQml/QQmlEngine>
work correctly.
Take care of all that, and add a bunch of comments explaining the whole
injected / generated headers interaction.
Change-Id: I612ad7549ce499c4979ee994e998b558716d45ca
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Check for the existence of CMakeLists.txt files before trying
to call add_subdirectory on examples, tests and src folders.
Change-Id: I7be76de5f7520c1dd181c610fd1dc2200ac74672
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
QtQml uses QLALR to generate a grammar, but the qmake qlalr feature
seems to be a general one, so the corresponding CMake implementations
are kept in qtbase for now.
Change-Id: Ibe916878b18155ddc5bb08793dd2075ebfa8f282
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
For developer builds, enable the compile commands database by default.
This allows Qt developers to use tools that utilize these (such as
clang-tidy, etc.) without any extra setup.
Change-Id: I79d70ef7dbe7c59864e93593c75f9ff6cd67c2ce
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Upstream's cmake build system installs libzstd_static for static builds,
so look for that as well. Now we can also recommend installing it via
vcpkg.
Change-Id: I0ba4c45ecd90bf7b1c9f1e5f84a440caa976a23c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Let's recommend vcpkg only on Windows for now. That's best maintained
and works best there.
Change-Id: Ied06b6a3cb26d9e56d3f525c1d5a410223754fba
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Before this patch we enabled AUTOMOC, AUTORCC, AUTOUIC for all targets
that did not opt out.
Aside from being wasteful from a performance point of view,
this also caused issues when trying to build qtimageformats which
does not depend on Widgets which is the package that exposes uic.
To avoid this, enable only AUTOMOC for all targets by default, and
UIC and RCC can be opted in via the ENABLE_AUTOGEN_TOOLS option.
To facilitate this some refactoring had to be done, like moving some
common setup for all autogen tools into a separate call, and making
sure that extend_target understands the autogen options, because some
ui files are only added conditionally.
Also the conversion script has been adapted to output the
ENABLE_AUTOGEN_TOOLS option whenever a .pro file contains at least
one FORMS += foo assignment.
Note that we don't really use AUTORCC while building Qt, so nothing
opts into that at the moment.
Task-number: QTBUG-75875
Change-Id: I889c4980e9fb1b74ba361abed4044737f8842ea4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The variable was not reset when interating through all the Qt targets,
which resulted in QtTest wronlgy depending on QtWidgetTools.
Task-number: QTBUG-75875
Change-Id: I24da495fa53e9163992a1ed53f5cd7e1c6da5e51
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Linux distros might not have a double-conversion library. Because
it is such an essential library for QtCore, compile and use the
the copy of the library bundled with Qt.
Also change library name to be a proper target with double colons,
so that in case the library is not found for some reason, the CMake
configure step would fail, instead of failing at link time.
Task-number: QTBUG-74133
Change-Id: I9f3b4298ae6e952891a7a89541d46878176bf1ce
Fixes: QTBUG-75891
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add a prefix for generated .qrc files so for in-source builds we don't
end up overwriting htem.
Change-Id: I8eef582479eb45d67585f6aab87b288393bbadb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Implement some aspects of qt_parts.prf to simplify the top-level
CMakeLists.txt for repositories that follow the common qt structure
(src, tools, tests, examples).
Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some qt modules need to find 3rd party packages for which there
are no Config files. We need to write custom CMake Find modules to
find those packages. These find modules need to be installed so that
they are used when a user consumes the Qt packages.
Automatically include and install these find modules if they exist,
as part of qt_build_repo_end().
Change-Id: I14aad35ed2999cac8bdda65ca4aeaf74d04fdb71
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
QT_CMAKE_EXPORT_NAMESPACE is used by the Qt packages to make features
available to the consuming CMake project. The value was moved to the
BuildInternals Config file, but that's wrong because consuming
applications not including the BuildInternals component would fail
to use any other Qt package.
Move QT_CMAKE_EXPORT_NAMESPACE to be propagated with QtCore package
again.
Amends 9542e78525.
Change-Id: I9841ac8c2828b00c0111d59e8976c889554e0ce1
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Current lates CMake has a limitation that it does not allow exporting
custom properties from INTERFACE libraries. GlobalConfig is such a
library, which means that so far all the global features were not
actually exported.
Copy the feature property values from GlobalConfig to Core. Because
Core is an actual shared library, it keeps the custom properties
when exported, and thus Core feature properties will contain the sum
of Core and GlobalConfig feature values.
Change-Id: Idde305cbaf9ab85ecfbe29522dcbac1c44022b17
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The GlobalConfig target is not an actual module, so there's no point
in trying to create forwarding headers for GlobalConfig's qconfig.h
within qt_feature_module_end.
qconfig.h's forwarding header will be created implicitly while
processing QtCore target's SYNCQT.INJECTIONS value, which is read
from the headers.pri file generated by syncqt.
This also fixes trying to create forwarding headers when processing
the sqldrivers project.
Amends 02a015375a.
Change-Id: Ifd70d8c3ebf881ffdcf90db8d5d3b23309bc8fed
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Once qtbase is built and installed, save the CMAKE_INSTALL_PREFIX
that was used during the build, and set it when a consumer calls
find_package(Qt5BuildInternals).
This fixes a bug where syncqt can not be found when building qtsvg,
while the developer specifies CMAKE_PREFIX_PATH to find the Qt packages,
but does not set the CMAKE_INSTALL_PREFIX.
Task-number: QTBUG-75544
Change-Id: I03fd23ba418af5115105610f3f9ed92664562945
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
To implement this, create a new Qt5BuildInternals package.
All child Qt modules like qtsvg should use
find_package(Qt5BuildInternals) or
find_package(Qt5 COMPONENTS BuildInternals) in the their
top level CMakeLists.txt.
This will make the qt_build_repo() macros available.
For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH
pointing to the source folder that contains the BuildInternals
package.
For the other modules we actually use a configured and installed
package Config file.
This change moves variables that used to be written into the
QtCore Config file into the BuildInternals package. This way
things that are relevant only for building additional Qt modules
does not pollute the QtCore package.
Task-number: QTBUG-75580
Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Currently to build qtsvg we have some copy-pasted code to set up
the paths for QtSetup and QtPostProcess to be found.
To make it cleaner, introduce two new macros called
qt_build_repo_begin and qt_build_repo_end(). The first one
should be called in a child repo like qtsvg, right after
a find_package(Qt5) call, and the second one at the end of the
repo top-level CMakeLists.txt file.
In order for the macros to work, extract some of the variables
which were set in Qt5Config into Qt5CoreConfig instead. This
makes sure that it works also for find_package(Qt5Core) calls.
Task-number: QTBUG-75580
Change-Id: I85267c6bd86f9291ec2e170fddab1006ab684b5c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
for pkgconfig it is different if they are not defined vs an empty string
Change-Id: Ifb05db5dab32a699aafa32d91f9719eab78dee44
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
DBus1 (1.12) configuration file breaks PKG_CONFIG environment
variables and will thus prevent other libraries to be picked up
by pkgconfig. Main sympthom is that xproto is not getting picked
up anymore, which results in hundreds of lines of warnings about
this being printed.
Work around that by wrapping the call to find_package(DBus1) and
restoring the environment.
Change-Id: Ia69f10b014dddc32045b40972500a843e5d29b38
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Separate the logic to find all used libraries from the code that writes out
the link_library information into the CMakeLists(.gen)?.txt files.
This patch will remove some "PUBLIC_LIBRARIES Qt::Core" from generated files.
This is due to us handling some Qt libraries in special ways in some of our
add_qt_* helpers. These special libraries were added to the LIBRARIES section,
but actually they should be added to the PUBLIC_LIBRARIES section instead. Do
so now, so that the newly generated files do not break things again.
Change-Id: I588781087a8aecc4d879e949735671d8085f0698
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
vcpkg and upstream CMake find module define different target names for
the same package. To circumvent this, create our own Wrap find module,
and link against it. Inside the find module, try both target names.
Change-Id: Iba488bce0fb410ddb83f6414244f86ad367de72b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Tested with MinGW 7.3.0 64 from Qt 5.12 installation.
The CMake 3rd party libraries I used from hunter project (with some
package, and target names changes)
Change-Id: Ie89555a6cd8bdb7182f9b2dd2c3c39784c523ead
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously we just recorded that Gui has to link against
Vulkan::Vulkan_nolink, but if an application consumed Gui, it wouldn't
find that target.
We need to record that if a module links against Vulkan_nolink, and
then generate a find_dependency(Vulkan) call in the module config
file.
We also have to assign the _nolink interface library to an export
(the Qt5 one), so that it gets installed as a target.
Change-Id: Icbc29ff4161ab18fdd162196ae128e29c1ee8c80
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate CMake config files which export Qt targets with a Qt:: prefix
(i.e. without a major version suffix in the namespace)
Change-Id: Ia07f98be6d0e24c196e3880b7469f1f0c6232c06
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Merge all data related to mapping libraries into one data structure
in helper.py.
Use that data for everything related to library mapping.
This change enables way more features now like e.g. adding find_package
calls into generated files.
Change-Id: Ibbd2a1063cbeb65277582d434a6a672d62fc170b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also needs the include/ from the top-level binary dir added to the
include path.
Change-Id: I7e0d82a2ee24d9bf9ffe9da5fd02b3b223fd48e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed because dependencies added after add_qt_module with extend_target
are currently not taken into account.
Task-number: QTBUG-75538
Change-Id: I2c72207fb88b2480e41a2c8550978fb194275617
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* When using a sysroot, just setting CMAKE_PREFIX_PATH to the
QT_HOST_PATH is not sufficient in finding for example Qt5CoreTools
because the QT_HOST_PATH would be prefixed by the sysroot. So this
patch switches the mode to also enable looking outside of the sysroot.
(done by Alexandru)
* Once the Qt5CoreToolsConfigVersion.cmake was found, the built-in check
for 32 vs. 64 bit compatibility by looking at the provided
CMAKE_SIZEOF_VOID_P (4 when target is armv7 for example) and comparing
it against the void* size used when building the tools would fail.
Explicitly unsetting CMAKE_SIZEOF_VOID_P disables this check, and
that's fine as we're not interested in any exported library targets --
where this could cause problems -- but merely programs to run.
Change-Id: If2931dad023e39a3dbdaa17ac095131ad2c0ca60
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is because some FindPackage may produce some targets only on some
platforms - e.g. qt_find_package(OpenGL) needs to define
the provided target OpenGL::GLX which will only exist on linux but
is required by various CMakeLists.txt files.
Change-Id: I74515470f5d56c246f489df74901ad4223a92a70
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also make the tool package depend on all tool packages that correspond
to the qt module dependencies.
So find_package(Qt5Widgets) implicitly calls find_package(Qt5WidgetTools).
And find_package(Qt5WidgetsTools) will call find_package for
Qt5GuiTools, and Qt5CoreTools.
This enhances the user experience, so that in modules like qtsvg, you
don't have to specify both find_package(Qt5Widgets) and
find_package(Qt5WidgetsTools), but only the former.
Or when cross building, you only need to specify Qt5WidgetTools, to get
both Core and Gui tools.
Change-Id: Ib1c5173a5b97584a52e144c22e38e90a712f727a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
CMake will now generate config and target files for each module that
provides tools. As a result, namespaced global targets such as
Qt5::moc or Qt5::rcc can be made available.
Third party projects that require just these tools, and not the Qt
modules themselves, should specify CMAKE_PREFIX_PATH pointing to the
installed Qt location, and call find_package(Qt5CoreTools),
find_package(Qt5GuiTools), etc.
It is also possible to call
find_package(Qt5Tools REQUIRED Core Widgets) where the last option
is a list of modules whose tools should be imported.
Note that all the tools are in the Qt5::
namespace and not in the Qt5CoreTools:: or Qt5WidgetsTools::
namespace.
This commit also changes the behavior regarding when to build tools
while building Qt itself.
When cross compiling Qt (checked via CMAKE_CROSSCOMPILING) or when
-DQT_FORCE_FIND_TOOLS=TRUE is passed, tools added by add_qt_tool will
always be searched for and not built.
In this case the user has to specify the CMake variable QT_HOST_PATH
pointing to an installed host Qt location.
When not cross compiling, tools added by add_qt_tool are built from
source.
When building leaf modules (like qtsvg) that require some tool that was
built in qtbase (like moc), the module project should contain a
find_package(Qt5ToolsCore) call and specify an appropriate
CMAKE_PREFIX_PATH so that the tool package is found.
Note that because HOST_QT_TOOLS_DIRECTORY was replaced by QT_HOST_PATH,
the ensure syncqt code was changed to make it work properly with
both qtbase and qtsvg.
Here's a list of tools and their module associations:
qmake, moc, rcc, tracegen, qfloat16-tables, qlalr -> CoreTools
qvkgen -> GuiTools
uic -> WidgetTools
dbus related tools -> DBusTools
Task-number: QTBUG-74134
Change-Id: Ie67d1e2f8de46102b48eca008f0b50caf4fbe3ed
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Update required dependencies.
Add section on how to build vcpkg on macOS.
Fix some typos.
Lower required CMake version.
Inform how to bypass annoying ninja reconfiguration issue.
Change-Id: Ia35bd4329c2cbb9857157cdc33b098f5adb04a35
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Otherwise add_qt_executable will still link against Core,
and thus building qmake in a static build will fail.
Amends a1752276e0
Change-Id: Iebbdf9d0a2808a9eaeffdf8fbdb44ff5e2920f3b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Qmake should not rebuild all the code in QtCore, but currently it does.
When linking against QtCore, all the symbols get duplicated. A clever
linker will "deduplicate" the symbols again, so this actually works
with shared Qt builds, but it fails for static builds.
Do not rely on the linker being clever and just do not link Qt at all
for qmake.
Change-Id: I0f79ed9176a19ee884dd425e5f23c26cf69dc422
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Use absolute paths for source files, and relative paths plus a correct
working directory for output files.
This is required to work around a limitation of the dbusxml2cpp tool
where it splits a command line option on a colon ":". Windows paths
contain colons, and that breaks the internal logic of the tool when
passing absolute paths.
Change-Id: Ic653f1317ae4f68bb2f488c117fe48c34310c76e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Applications that have the WIN32_EXECUTABLE property set,
must have a WinMain function. In qmake's case, this function
is provided by the qtmain static library.
Until that is implemented in CMake land, disable the property on
Windows for all qt executables. This fixes the linker issues while
building examples.
Task-number: QTBUG-75195
Change-Id: I323d4dd899f716cd6b9b7f4b5ecb76b22f462fc4
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Use an imported target to create _nolink targets. This gets rid of
the need to have an helper target that gets aliases to get work
around the problem of the original target might having a "::" in
its name.
Change-Id: I4618980cf2c673ebf5caca593bccf122b3c81480
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a helper function to QtBuild that generates Foo_nolink versions
of Foo library targets.
Map 'Foo/nolink' libs found in qmake to Foo_nolink.
Automatically run helper function to create _nolink targets as
part of extend_target.
Change-Id: I4c23ea68b3037d23c9a31d4ac272a6bd0565f7c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The test erroneously succeeds on macOS with an XCode generator.
Explicitly set the test result to be turned off.
Change-Id: Id6fcb96f420f611517e81cc3697f1c88b508bd7c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Tests and their helpers should only be used in the build directory.
Change-Id: I5aa9fcf734b6b3667f91df7c84d083f944c452c9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Makes qtextcodec test succeed
Like qmake does
qt_test_helper.prf says
"
If an auto test needs a helper application, this helper should
be put into the same directory as the test itself.
"
Change-Id: I02cb36d2237cdb72912c943250b843c33ffcd64a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This includes:
- tests
- tools that are only used duing the Qt build (tracegen and
qfloat16-tables)
Change-Id: I3a5f678682b5b9318012568a9e4dcdda0967f89b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This FindCups defines a target, which the FindCups.cmake in the currently
required CMake version does not:-/
Change-Id: I76c5bb72ece80415db1971e4f2079682126fde36
Todo: Remove again once we depend on CMake 3.15.
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is especially important on macOS when doing a debug build,
because QPluginLoader is looking for the cocoa QPA plugin
suffixed with "_debug" when executing a test or example.
Change-Id: Ief23b3a82c567c16ab9dd30d04d1729031262d7d
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The one shipped with cmake is more modern:-)
Change-Id: I024769825467734ff1527e91df4cf5dfc38cbe68
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
The install path takes into account the path structure of the source
directory, so that not all tests are bunched up into /tests, but
rather /tests/auto/foo/bar.
Change-Id: I5e32d2e41ae8f095f4eac6654973508efd598df0
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Only require TYPE if no OUTPUT_DIRECTORY, ARCHIVE_INSTALL_DIRECTORY
and INSTALL_DIRECTORY is provided.
Change-Id: I6db1cfaa576bfa3ee3dc8ecf81db20e3afcd61e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
While building on macOS, AUTOMOC sometimes hanged indefinitely.
The problem was that AUTOMOC was executed for the qmacstyle
plugin before moc was actually built.
Because of an upstream bug in CMake, AUTOMOC was caught in a deadlock
without reporting that spawning the moc process failed. Specifically
if a libuv spawn() call failed, the condition variable for a waiting
thread was not notified, and the thread kept waiting forever for the
process launch to finish.
Fix the dependency by setting the AUTOGEN_TARGET_DEPENDS property
on all targets that have AUTOGEN tools enabled. This makes sure that
moc and friends are built before they are used.
Also add some special cases to disable autogen tools on certain targets
to break cycles between targets.
Fixes: QTBUG-74636
Change-Id: I6e689e63cba1962525f169f332a58498d173c0a6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
It broke builds because the qconfig.h file was created in the wrong
directory.
This reverts commit 25f67fbb07.
Change-Id: Ia458ef4193a3985a9ba613d82f679b7df5ca0107
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
This is only a half solution, because some of them need to be set
based on the detected MSVC version and Windows kit, similar to
how it's done by qmake.
Change-Id: Ice13c99d6fe0a033ddfebf9d4be924dcd6b8a36c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake there are at least 2 things to know regarding
sub-architectures and instruction sets.
Which instruction sets does the compiler know to compile for,
represented by the various config.tests and features in
qtbase/configure.json.
And which instructions sets are enabled by the compiler by default,
represented by the configure.json "architecture" test and accessed
via QT_CPU_FEATURES.$$arch qmake argument.
Before this patch there was some mishandling of the above concepts
in CMake code.
The former can now be checked in CMake with via TEST_subarch_foo and
QT_FEATURE_foo (where foo is sse2, etc).
The latter can now be checked by
TEST_arch_${TEST_architecture_arch}_subarch_foo
(where foo is sse2, etc and the main arch is dynamyicall evaluated).
The configurejson2cmake script was adjusted to take care of the above
changes, and the cmake files were regenerated as well.
Change-Id: Ifbf558242e320cafae50da388eee56fa5de2a50c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Presumably this was a copy paste that was not intended.
Change-Id: I09e3bb12b3b3f7af75726d7a952d79814ea9c876
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This amends 4f1a155909 and
37b154858f which caused the regeneration
of some json features to be internal. Some of those features were
not evaluated any more unless they were referenced in another feature.
Make sure to explicitly evaluate all internal features as well.
Change-Id: I4367f309585fe29dc89d8a6b793de381956ae51d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Make add_qt_executable link to Qt::Core by default. Add a BOOTSTRAP
flag to disable this behavior again.
Pass BOOTSTRAP on from add_qt_tool to add_qt_executable.
Change-Id: I26e7f1e03254122f626b3765cccc0dc4414a4fc0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow to override the install directory for Qt executables.
Change-Id: I9561976eefe9c7b573bb97ddaaa39e30d3b6d9fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use the same names for DBus adaptor/interface files that are also
used by qmake. E.g. io.qt.something.xml will be turned into
something_interface.(cpp|h) or something_adaptor.(cpp|h).
Change-Id: I799b8aee7addd1fe590e8f3ec078e5325b68d5b1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Treat a relative path in OUTPUT_DIRECTORY as relative to the top level
build directory, not to the current build directory.
Change-Id: I4d409d1362a8f73d13b93cf5ab98e82e60dd62cb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- executed pro2cmake script on windows qpa plugin
- added windowsuiautomation platformsupport project
- fixed plugin dlls and lib files to be written to the same path
- fixed an issue comErrorString which used implicit casting
from QString to char*, but plugins are currently built
with QT_NO_CAST_TO_ASCII
Task-number: QTBUG-74140
Change-Id: I5db3b6c5264bbd5dfba2998b049fda36eb312c70
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Fix qmake build
- Fix QtNetwork moc-ing, by including the moc files
inside the cpp files
- Fix sql odbc plugin by including QT_PLUGIN define
- Fix Boostrap to link against the Platform target, to get the
correct Unicode and WIN64 defines.
- Fix vulkan headers to be found
- Fix freetype bzip and png unresolved symbols / linker issues
when building minimal platform plugin (also need to make
sure to use the vcpkg toolchain instead of CMAKE_PREFIX_PATH
because then find_package is overridden, which does magic
to properly propagate static library dependencies).
- Fix qfilesystementry test not to be built without private
tests feature (it led to undefined symbols issues).
- Make sure to remove QT_NO_CAST_TO_ASCII define when building
QtCore, so that the qstringbuilder3 test builds
successfully.
Task-number: QTBUG-74140
Change-Id: I353d08392b604d55f8e62cdd8696d1e19a3c084a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of generating defines guarded by feature ifdefs,
record the define information (condition, name, value, etc),
and generate the final define statement only if the feature
condition evaluated to true.
This removes the need to generate feature defines
(QT_FEATURE_foo) for features that have neither public nor
private outputs in the configure.json file.
Also note that all qt_feature_definition() calls
(which correspond to type:"define" outputs in json files)
now generate defines only in the public header, which seems
to be consistent with how qmake evaluates json files.
Change-Id: I5210b405d5735dd9df5f7a55d1ea9547bb7b1159
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Certain features like opengles2 can be enabled or disabled based
on the conditions that are specified in the ENABLE and DISABLE
parameters.
Because some of those conditions use STREQUAL with
a single quoted argument, we have to use
qt_evaluate_config_expression to circumvent the CMake bug
regarding single quotes, which is described in the function
implementation.
Only then will enabling / disabling work correctly.
Change-Id: I3b68ef611c985f0d8416fd089055fd862da1e542
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The script used to write incorrect dependency headers due to not
clearing the qtdeps variable at each loop step.
Change-Id: Icf293be7cea596daa096ab19d390c0bb468a8654
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
* Handle BASE to give the directory files will be relative to.
* Support lang="foo" for qresource sections.
Change-Id: I36087220d03789a97105dc6dd1aca7a25a063d9f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
moc does not generate moc_defs.h and that's why moc does not understand
that he runs on macOS.
It happens because cmake can not find Qt version.
Change-Id: I34c51ebb69dc1ff782a0f129e114cda819122805
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a function to set gc-sections flags on the linker.
Change-Id: I9ac02364836d2aa8de239adb8d3a5d29659a4007
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only has warnings for now
Next to come is the support for developer-build and enabling Werror
Change-Id: I8070dc06eb439c2a03007cce975c8147ff7e1582
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Because the default "empty" CMAKE_BUILD_TYPE is a weird default
Change-Id: I5768f67aa85dce4108e421d2f4eacdfb1cb5beb0
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Upstream commit 7c64db9568296e1caafcfd7163cea3ab1b1626ae fixed the
suffix path checking and thus the build on FreeBSD.
Change-Id: I0cceeac0639c2899c617ffd6359098d2154acf5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Pass -DQT_USE_CCACHE=ON to enable the use of ccache. This avoids having
to set up symlinks, which is useful when cross-compiling against
different targets.
Change-Id: I023fff105baaa538730997948aa122d2678887ce
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Don't try to build uic but instead import it. This is done centrally now
in add_qt_tool.
Change-Id: I241fbb924de68549e9c0320e157351bd7b1bf5c3
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Public interface libraries of the private target need to be first looked
up via `find_dependency(...)` in the CMake config files as well.
This patch is just changing the foreach() loop and defer the package
config file generation.
Change-Id: Iecaf7f778379b526f12ac6a42e76d714d9349b2c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Lifetime of the variable is bound to the function body. Use a CACHE
variable to escape it (and to speed up future calls to the function).
Change-Id: I2d164a1c94e64cc652e65c1eea0522f3d911ad82
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... when QtBuild.cmake is being included from another Qt module
Change-Id: Ia55e03422cc84a56dd9eac640621e5b2ee9681bd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The ECM version now also does a compile test, which was the only real
"functional" difference.
Change-Id: I1d5cd590359feba7c7a38ff374992349d5943070
Reviewed-by: Volker Krause <volker.krause@kdab.com>
This makes it possible to use the binaries out of the box. This is
particularly relevant for program binaries that link against QtCore
dynamically, when trying to use these binaries during cross-compilation.
Change-Id: I7dee93194be3fff5c6e3bbb9e202e4cf5e19b6d0
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Otherwise the cmake summary at the end says
-- The following packages have not been found:
* WrapOpenGL
It's OpenGL or GLESv2 that will show there as missing if needed
Change-Id: I182f1299b86e1a4e24762d0bad6533c6136cbbcc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The syncqt generated headers are optional, i.e. their source may not
exist -- so for now make their installation optional (as it seems to
have been the case with qmake).
Change-Id: Ieaeb3d13a1d8ff1f158b5b1c918750fec48d3bef
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
