$ORIGIN (or $LIB) needs to be escaped to survive the trip through
make and the shell.
this shouldn't break anything, as there was simply no way to get it
right so far.
Change-Id: I86337c5994d10dae2e80dd2f858f74874b14bca7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
they are self-contained, as they are the result of another project's
full resolution. consequently, recursing them just burns cycles, and
additionally introduces the risk of an endless loop if the file is
botched.
Task-number: QTBUG-12711
Change-Id: I401ee691c170092cc61fe05538cec4272ed8f922
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
don't try to install the primary target, as it obviously doesn't exist.
however, we must not disarm bundle installation.
Change-Id: I3074150f749220d77c1210a4978e71aff9c9a3a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
no other generator does it. if it actually buys anything, it should be
re-instantiated differently.
Change-Id: I8431702ac7d558d65fd28a7f9e36bb49db2eb253
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the logic was such that if the bundle name already had the specified
extension which was not the default extension, the default extension
would be appended, too. i don't think that was the intention ...
now we simply put the default into QMAKE_BUNDLE_EXTENSION if its empty -
the variable is not used anywhere else where it would be expected to
preserve its emptiness, so this is safe.
Change-Id: Ied34d10f9fe60756bddc0037dcb2f1d3bbfd3e12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this isn't some fuzzy logic, the call sequence is well determined.
Change-Id: I1696b49ed687da83d2969efcfe23ac6565630020
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of duplicating the plist/icon/bundled_files logic just to obtain
the dependencies, create them as a side effect of the actual target
creation.
Change-Id: I6a0fe26c82c490b1040a7a06d5d0e7a4567ae1af
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Defaults qmake behavior is to make all project RPATHDIR paths absolute prior
passing them to linker. We need to make an exception for paths starting with @
such as @executable_path (Apple platforms) or $ such as $ORIGIN (Linux).
Task-number: QTBUG-31814
Change-Id: Ie9887c0046c5030c4128dda945b491a5d389ba34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
At the very least, include the files named in the sources, like
HEADERS. It was quite surprising to send a tarball that included the
.pro file and the .cpp sources, but none of the headers.
On the other hand, the .qmake.cache file need need not be sent either,
despite being include()d in qmake's processing.
Change-Id: I8f48ca3e8040f954f321f4643b01c0f36aafe2d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On Android, there's a limitation set on the names of the libraries
you deploy that they must start with "lib" and end with ".so", so
Android apps will link against and deploy with the unversioned
libQt5FooBar.so libraries. When cross-compiling on Windows however,
due to the lack of symbolic links, the only installed library
used to be the main library target "libQt5FooBar.so.X.Y.Z" (for
version X.Y.Z.) This has been worked around in packaging, but
breaks building add-on modules on top of Qt, and is clearly
wrong.
This patch introduces a new "unversioned_libname" configuration
in qmake which is currently only supported for the Unix makefile
generator and only enabled for Android builds. When it is enabled,
only the unversioned library "libQt5FooBar.so" will be created.
Task-number: QTBUG-38347
Change-Id: Ia8897ca7a23a62e2a526d0e02854899b02eb19dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
fileFixify must not be called twice on the same file path, since it will
convert an absolute path from the shadow build to an absolute path in
the source dir. The first fileFixify occurs in MakefileGenerator::init,
along with the fixifying of INCLUDEPATH.
Change-Id: I607870573a80eaf834ea5f540bbe1451ec983114
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not include the project file twice or other
.pr? files outside the project tree.
Task-number: QTBUG-21910
Change-Id: I62af842282ccdc5b9099d9227d5395ebe3f0698c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a preparation step for 'make dist' target for subdir projects.
UnixMakefileGenerator needs these variables while extending
writeSubTargets() and writeDefaultVariables() for 'make dist'.
Partial cherry-pick of
https://qt.gitorious.org/qt/jpnurmi-qt/commit/8c4ef19
Task-number: QTBUG-21910
Change-Id: I02a616a98448bc3041ef0f4fd034bfb4c2199e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
d28073d9 creates a distinction between "mac" and
"macx". The latter is not set on iOS, which caused
MakefileGenerator::target_mode to be set to TARG_UNIX_MODE.
Check for the "mac" active config instead of "macx".
Rename TARG_MACX_MODE -> TARG_MAC_MODE.
Change-Id: I7192788c33f5723034ba76da2492379dd454f0ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Metafiles such as .prl and .pc files contain paths that have to be
adjusted during installation. The same code is used for unix and
windows so move it into the base class.
Change-Id: I82db89ec83820a4fa0214ba15e7cd63438f6dc91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
complementary to QMAKE_RPATHDIR. this avoids that we need to sprinkle
linux/gcc specific code all over the place.
Task-number: QTBUG-27427
Change-Id: Iebafd1749d1a0d803704902473df8c743f074ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it was unused for a decade. and broken, of course.
Change-Id: I9713d595d95c5b074ef96dfe9b1c314b9198bd7e
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the paths may be explicitly added before some other paths, so it would
be wrong to remove them.
Change-Id: I68ae93fd307afe14a07a0f24de952783950b5bea
Reviewed-by: Holger Freyther <holger+qt@freyther.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason why private libs should not have prls resolved.
the two variables are resolved independently, so it's possible that
(even more) libraries will appear duplicated on the linker command line,
but that seems easiest for the time being.
Change-Id: I9070ba53808a0661fa72949db8111106b7aca487
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's more elegant, and more similar code is better.
Change-Id: I2b8b036cb70a932fd171e23cf7d3389188401924
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i see no reason why they should deviate
Change-Id: Iaa0445b79a95d348f51df74a74c7c89216c468ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
given that nobody noticed so far how broken this was, this doesn't
appear to be a particularly common path. but anyway ...
Change-Id: Ic17b239d724a4d69ff414a24be2e8588732bc8dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code wouldn't actually *do* anything with them, because it was
completely broken. didn't seem to hurt, so just remove it.
we still need to parse -framework, though, so we don't do funny things
with its possible argument.
Change-Id: Ia3266538612d3314a72f4965ee9c1ea2d3046ac9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
merge their content as early as possible into QMAKE_LIBS. that's where
they ultimately end up anyway, and this approach is way simpler.
QMAKE_FRAMEWORKPATH_FLAGS is also used for the compiler flags, so it
remains as such in this second function.
Change-Id: Idc3ba4a9b2569fce3252d5f5ddc3f6ebf93650cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
findLibraries() now consistently expands to the linker-specific syntax,
and processPrlFiles() expects that syntax.
Change-Id: Ifd7b51d01378c91d6f2b132aca33629f21ca72f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
libraries and related flags have no business in that variable, by
definition.
Change-Id: Ic958a3e082a498945ab56bc12ec05d4083ee43a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
that's consistent with other projects. 'qmake_all' can be used for
recursion.
Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
