Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Remove benchmark tests that are no longer required as they are simple
overloads of other methods.
Change-Id: I610211543d17c077f482fa2145ac3da7d0767282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support to QDateTime for time zones using the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Add support for a new Qt::TimeZone
spec to be used with QTimeZone to define times in a specific
time zone.
Change-Id: I21bfa52a8ba8989b55bb74e025d1f2b2b623b2a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current question is whether activeThreadCount() should be lock-free
(using atomic ints) or mutex-protected, so this tests start()
and activeThreadCount() directly.
Change-Id: Ica4a2ad023c2002e3c7d81558e6b9ee64af7f690
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QFSFileEnginePrivate::canonicalized has been gone for a very, very long time now
(since d3b152ba1e3cd38dd675c801474105d518bacb44 in Qt 4).
This also fixes a build failure in the code on Windows.
Change-Id: I81f5e0c1d644b1b4d75644626eb394a663535387
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Each pair of (normal request, preconnect request) requires only one
socket. E.g. if there is 1 preconnect request in-flight and 2 normal
requests, we need only 2 sockets in total, and not 3.
Therefore, we need to keep track of whether a request is
preconnecting or a normal one.
Task-number: QTBUG-31594
Change-Id: If92ccc35abadfa6090d64ee92bd466615909c94c
Reviewed-by: Richard J. Moore <rich@kde.org>
Compilation failed because "open" is defined as "open64" in fcntl.h.
This definition is reverted now.
Change-Id: I9badcf11131320c53e442cd5b8b21bb5aa4efee5
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
When calling intersect() on a large (1000000 items) QSet, with a small
(1000 items) QSet as the argument, the function takes signifcantly
longer than when the operand and the argument are reversed. This is
because the operand set is always iterated over in its entirety.
This patch changes intersect() to iterate over the smaller set. This
reduces the large operand scenario's benchmark to ~0.000063
milliseconds, compared to the current ~134 milliseconds:
1000000.intersect(1000) = empty: 0.000063 (was 134)
1000.intersect(1000000) = empty: 0.000039 (was 0.000036)
1000000.intersect(1000) = 500: 0.10 vs (was 130)
1000.intersect(1000000) = 500: 0.023 vs (was 0.093)
1000000.intersect(1000) = 1000: 0.20 vs (was 139)
1000.intersect(1000000) = 1000: 0.017 vs (was 0.016)
Task-number: QTBUG-22026
Change-Id: I54b25c49c78c458fef355e9c6222da8a64c7681f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If an app knows it needs to connect to a host beforehand, it can "warm up" the
connection cache by making DNS lookup, TCP (and if needed SSL) handshake before
the actual HTTP request is sent. When the HTTP request is made, it will be
considerably faster when there is already a working connection.
Here are some typical results from the benchmark:
* Linux desktop with Ethernet:
"http://www.google.com" full request: 279 ms, pre-connect request: 61 ms,
difference: 218 ms
"https://www.google.com" full request: 344 ms, pre-connect request: 60 ms,
difference: 284 ms
* mobile device (BlackBerry 10) with Wifi:
"https://www.google.com" full request: 898 ms, pre-connect request: 159 ms,
difference: 739 ms
"http://www.google.com" full request: 707 ms, pre-connect request: 200 ms,
difference: 507 ms
Task-number: QTBUG-30771
Change-Id: I3566b7f08216ab93a39e2024ae7d1ceb7ae21891
Reviewed-by: Jonas Gastal <gastal@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Void is not constructible, so there is no point in checking how fast
it can be constructed.
Change-Id: Icb4b607bebce30fff5fc57b105101f019e0e0db5
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In some situations we can get into resizeSections in a hidden
QHeaderView. If the headerView is hidden then we look at all the
rows, and that can be extemely expensive for a large model.
This patch limits the sizeHint with only looking at a maximum
1000 rows. Though this is more inaccurate it is also faster -
and it is not much different from what QTreeView does.
Change-Id: Ief4b54c5a3c5a0db02e8b595c9b9b3162633ee67
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This removes some XFAILS that were no longer correct and
fixes some existing problems in the tests where ODBC is
concerned.
Change-Id: I91de526bb50ad4046ba07ddb5336aa3714966687
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
It was only used for toUpper/toLower but always computed in the
constructor, including QString::toLatin1 conversion and allocations.
This needlessly slows down all other uses, including supposedly "cheap"
operations QString::toDouble, or accesses inside QResourceFileEngine.
The benchmarks indicates that doing it always when needed is bearable.
There's still a lot of improvement potential on these code paths.
Change-Id: I88b637ee11f9f7ea614f8da4ec5df0bf40664fce
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
WEC7 does not have ws2_32 lib. The lib is needed for gethostname symbol,
instead of using hard coded platform specific libs,
rely on QMAKE_NETWORK_LIBS variable containing network libs.
Change-Id: Ice39ca3f2d176cc5df88beded4b64d2b92f4f3ba
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Use Q_OS_WINCE ifdef in both method declaration and definition,
in addition combine QT_NO_PROCESS and Q_OS_WINCE ifdefs to one line.
Change-Id: I0787e4341c41b46a5fc089f24a538c0ad40a0875
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Oracle has a limitation of 30 characters for a tablename so the main
change is to account for this, which meant changing all the usages of
qTableName(). Some other fixes are included that ensure the tests are
working correctly as far as Oracle is concerned.
Change-Id: I8ad8a5a33e6a70fcad235f6a7e82e91687b74fee
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
By moving it to QSqlDriverPrivate we make it easier to check what
database is actually connected which is particularly useful for the
autotests.
Change-Id: I54d1c2c998919c1d54efb1b6ac9303070ece54aa
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In case somebody uses QVector as a stack, it is not fair to have
takeLast, removeLast and pop_back to do way too much work.
This is still very slow compared to std::vector::pop_back
(mostly due implicit sharing), however it is more than a
factor faster than before.
Change-Id: I636872675e80c8ca0c8ebc94b04f587a2dcd6d8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a fast insert on QMap when providing a correct hint.
Change-Id: I256bba342932c1d4f24c6e65074e1bf47b519537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
All Web service APIs like Facebook, Twitter etc. use SSL for
uploading pictures etc., so it is good to have a benchmark
for that.
Task-number: QTBUG-28764
Change-Id: I590f76ac8b6575509f1635c18c35f9fe652fa8f8
Reviewed-by: Richard J. Moore <rich@kde.org>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Iba4b7f8ff7a1c7974d144b955cbf064e43b36ec7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
CONFIG += pcre is enabled if we're using the Qt PCRE, which isn't
compiled for 8-bit. If it isn't set, then we have a system PCRE.
Change-Id: I29d043b9d3f4d3223dcbb41eadc9f859e710eb88
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
it compiles just fine without it.
if this was meant to inject a newer version of JSC than what is in
QtScript, it can be redone without creating a bizarre hybrid.
Change-Id: I61fe60bfa6a9bdb6423e8a7135250e332a5835ec
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were already installing them into QtCore/private, so turn them into
proper private headers to start with. this cleans up our project files.
Change-Id: I0795f79e03b60b5854de9e4dc339e9b5a5e6fd87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This makes the structure of the examples after an 'make install'
similar to the one in a 'developer build'.
Change-Id: I9120bd741fab332e64e30adc01cefe87e5633454
Reviewed-by: Martin Smith <martin.smith@digia.com>
Benchmark tests are not supposed to be run by "make check"
Change-Id: I718565a8b4e71c136c7aa8f9bd95f95c5fdafab8
Reviewed-by: Rohan McGovern <rohan@mcgovern.id.au>
Add a read position variable to eliminate excessive memcpy'ing when
reading a partial buffer.
Specifically, fix performance issue of reading large files from
QNetworkDiskCache in QtWebKit2.
Task-number: QTBUG-27522
Change-Id: I21edc909bf9223971b2c3db5f1fa6b89c5b61c5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Antti Harju <antti.harju@ixonos.com>
tst_QMimeDatabase::inheritsPerformance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/mimetypes/qmimedatabase'
to 'tests/benchmarks/corelib/mimetypes/qmimedatabase'
Change-Id: I59e84f61559023659f101666683870f2ca1d2034
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
We can insert directly on the most left-most Node.
We always enforce an insert here (unlike the insert call),
but that is not a problem since the keys in a std::map are unique.
Change-Id: Ib409b90ffc57a5a43dab4a4b08d34f6fdabd057f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This suggestion keeps track of the most left node.
The point is that constBegin() becomes a lot faster.
That speeds up iteration a bit, and makes it O(1) to get the
first element. The penalty in insert and remove is very small.
On large trees it seems to be less than 1%.
It should be noticed that constBegin() is a very common hint
on my planned change to 5.1, and this opperation will without
this patch cost 2 x log N. One when the user calls the hint
with begin - and one where it is compared with begin.
Other std::maps has a very fast begin(). E.g
http://www.cplusplus.com/reference/stl/map/begin/
(begin with constant time)
Change-Id: I221f6755aa8bd16a5189771c5bc8ae56c8ee0fb4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Giving the std-map a hint (normally) improves insert performance.
There seems to be no reason not to provide this hint.
Change-Id: I4344607ebf54574a3ae9666d87a41a3c14762361
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_QProcess::echoTest_performance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/io/qprocess'
to 'tests/benchmarks/corelib/io/qprocess'
Change-Id: I796788534eafc5ca3b8d86c0ec46998285fd4b8f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The QLabel is not actually used.
Change-Id: Ia3f43b734fa52ad002111943ed1ba55b9e8a678c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This reverts commit 101d04681f.
That change seems to have introduced a few regressions, and
Creator hits an assertion that it introduced because it assumes
the additionalFormats consists of well-formed ranges
(QTCREATORBUG-7995).
Change-Id: Ic4ae761e6e7f6df8a6b5ca565ceb250647420c15
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This is useful when the additional formats are used on a
text layout using a raw font. It can also come in handy for
input methods operating on a QTextDocument.
We now consider all format range edges to generate the
associated items. The capitalization can be overridden via
the additionnal formats mechanism.
Adds an autotest that checks that this works with font capitalization.
Change-Id: I782d2c48d05b0dfbad480a9ca77198465292b358
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
It's closer to what we do with in QMutex than pthread_mutex_lock.
Change-Id: I86498a800b69b684bf096912e911bc5bca219727
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
When QTextLayout is used in a QTextDocument, many code paths use
special caches and thus greatly outperform the raw QTextLayout version
that operates directly on a QString.
This patch brings some of these optimizations also to the raw version.
We now also use a QFormatCollection in such cases and enable the
functionality of QTextEngine::indexAdditionalFormats() and
QTextEngine::resolveAdditionalFormats(). Thanks to that, we can greatly
speed up QTextEngine::format(), which now uses an amort O(1) hash table
lookup instead of a O(N) linear search.
The added benchmark shows a gain in the order of one magnitude:
./tst_bench_QText formattedLayout:long-many
before applying the patch:
378.19 msecs per iteration (total: 37,820, iterations: 100)
after applying the patch:
25.80 msecs per iteration (total: 2,580, iterations: 100)
Note: This change is source-incompatible for applications using the private
QTextEngine API.
Task-number: QTBUG-8389
Change-Id: Ifcf7a8902a394428979ea06a6d955f886ee739c7
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QDateTime will attempt to convert unknown types of date to UTC time, which isn't
exactly a fast process. As we don't care about local timezones in the process of
sorting (as this is purely for ordering, not display to the end user), we can
force the dates to use UTC time, avoiding the unnecessary local timezone lookup.
This also adds a benchmark covering this case.
Benchmark results, Qt 5:
- before: 11, 489ms
- after: 273ms
Qt 4.8:
- before: 20, 848ms
- after: 278ms
Change-Id: I87fa6260e820b5b172d3306ff395dafe767c33ff
Reported-by: Thomas Perl <m@thp.io>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Ensure benchmarks which need QtWidgets are gracefully disabled when
that module is unavailable.
Fixed one unnecessary usage of "QT+=widgets".
Change-Id: I8031b5dca585749f0f4d22e0637adc3f57f4e418
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Using the nullary version has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything. So I've added the macro where it
was missing, or moved it to a central place when it existed
hidden.
In tst_qnetworkreply, this became a bit tricky, because a private
header is conditionally included, so moved the Q_DECLARE_METATYPE()
into a conditional section, too.
Change-Id: I71484523e4277f4697b7d4b2ddc3505375162727
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
qdatetime.h uses std::min/max and on Windows windows.h (or some subsequent
header file) may under certain circumstances define min/max as macros.
The easiest way to prevent the windows header files from doing that is to
define NOMINMAX in the place right before windows.h is included. The other
way is to define min and max to min/max themselves to prevent windows.h
from doing its evil thing.
If a user of Qt (WebKit in this case) chooses the approach of defining
min/max to themselves and then includes qdatetime.h, then a subsequent
inclusion of windows.h doesn't work because qdatetime.h undefines min/max.
We should not enforce the type of workaround needed, therefore this patch
removes the workaround from qdatetime.h and requires user code that
happens to include windows header files before qdatetime.h (seldom case)
to choose either workaround.
Change-Id: I7347eec7369491a065e894cff557004e069453d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I052a3412a568ad639f2bf169b4491b56dddff1c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I6ea46cd6dfed75afc253fa2b4e3f1789bdad1d4e
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
I had missed these, apparently.
Task-number: QTBUG-23274
Change-Id: I6455dc34b18ec9cefccfe527b3fd3ad34fb61aa3
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Default QDataStream version was changed in Qt5, but the test tried to
load an old dumped file.
Change-Id: I49c06c232ec8a27f33c9da345bae4e03cd0c56fb
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
0xfdef-0xfdd0 is definitely 31 and not 15 :)
also fix all copy-pastes of this code (greping for '0xfdd0' helps ;)
Change-Id: I8f3bd4fd9d85f9de066f0f5df378b9188c12bd48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QT_NO_STL is now no longer defined, so remove the conditionals and
select the STL side.
Change-Id: Ieedd248ae16e5a128b4ac287f850b3ebc8fb6181
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSharedPointer isn't meant to be used as a
base class.
Instead of inheriting from it to add implicit
conversions to and from QNetworkReply*, make
QNetworkReplyPtr a typedef, overload two
oft-used functions to take a QNetworkReplyPtr
in addition to QNetworkReply*, and otherwise
make the conversions explicit.
Change-Id: I1eff1793a19f2d5bad1cce8de74c0786675a50f3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QMap used to use a skiplist in Qt 4.x, which has variable
sized nodes and we can thus not optimise using custom
allocators.
The rewrite now uses a red-black tree, and all allocations
and tree operations happen in the cpp file. This will allow
us to introduce custom allocation schemes in later versions
of Qt.
Added some more tests and a benchmark. Memory consumption
of the new QMap implementation is pretty much the same as before.
Performance of insertion and lookup has increased by 10-30%. iteration
is slower, but still extremely fast and should not matter compared
to the work usually done when iterating.
Change-Id: I8796c0e4b207d01111e2ead7ae55afb464dd88f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code was only allocating memory for the next insertion
leading to a reallocation of the whole data for every
single insertion.
The code now reserves some space and uses a decent growth
strategy to avoid repeated reallocs.
Change-Id: I48b0feab71ba8ca73e7037f8460080f198b2f009
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
- Added toByteArray() and fromByteArray() benchmark tests.
Performance tests to measure QVariantMap to bytearray
and bytearray to QVariantMap.
Use case: Interprocess communications via local socket
Change-Id: If5e94ff870890b2ebb665f3cc38f5c33b34547f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed benchmarks to use TESTDATA and QFINDTESTDATA
- Fixed up targets all use tst_bench_ syntax
Change-Id: I5c2936702e248478f5df225ce38893158ee22d7f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The implementation uses QScrollBar, which is no longer
included by <QtGui>.
Change-Id: I2422cfccc427179ca71e9a3195f16bd637925fb3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QPointF is in the category of types for which QList
is needlessly inefficient (elements are copy-constructed
onto the heap and held through pointers). Use a vector
instead. This is consistent with the QPainter API.
Change-Id: Id0e910c067a60d12fbc175e7ee7da824834be374
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
A case of a custom type creation was not covered before.
Change-Id: Icd2a7d63633f8e40d9d4a8a26e0eb0896fc85ec8
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It's not faster under _any_ metric than the new algorithm, and it loses a lot of
spread which is a bad thing.
Change-Id: Ic87258f1c887822ffea1cb1517355564fabc3c26
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We must do this the same way we do all other hash algorithms for fair
comparison, as otherwise, the call to the PLT unfairly penalises
QHash<QString>'s results, as it's in a different shared object.
Change-Id: I69c891f5a97dcccdfcfbdbf32796f86242a42963
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Per the comments on Ie4100a1ca4dbe7bf1cd73de883a9854377ac2f5e, having Q_ASSERT
was not a good idea, and data functions can't really handle
QVERIFY/QCOMPARE/etc, so do this in initTestCase instead.
Change-Id: I19e61dec7fe415bb1fa0f53a2920d99b8c7c8ea7
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Similar to the UUID benchmark, but won't have any non-numerical characters.
Change-Id: I7487c97cab96fd53c180fe12061e7be3ca96e883
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This attempts to emulate a dictionary usecase of sorts, done in code to avoid
bloating the git repository by adding an actual word list.
Change-Id: I878bc4af8877ba780ee699932f240c0d9c8ff12c
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The new layout matches that of QByteArrayData and QStringData, except
for offset which is measured from the beginning of QVectorData, whereas
in those classes it (still?) references the end of the header data.
The new layout uses an extra member for storing an offset into the data,
which will allow introducing QVector::fromRawData, similar to the same
functionality already existing in QString and QByteArray.
By not using an actual array to index array members, we also steer clear
of GCC bug #43247:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43247
Change-Id: I408915aacadf616b4633bbbf5cae1fc19e415087
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
This includes padding necessary to align the data array, but excludes the first
element as was done before. Size of header is the interesting piece of
information, anyway.
This simplifies calculations in a couple of places, harmonizes code with the
QRawVector fork and paves the way for further changes in QVector, namely the
memory layout.
When Q_ALIGNOF is not available, default to pointer-size alignment. This
should be honoured by malloc and won't trigger use of more expensive
aligned allocation.
Change-Id: I504022ac7595f69089cafd96e47a91b874d5771e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For non-movable types (QTypeInfo<T>::isStatic), QVector would grow the
array linearly, and defer to qAllocMore otherwise. That property,
however, gives no indication as to how the vector will grow.
By forcing additional allocations for growing containers of such types,
this penalized exactly those objects which are more expensive to move.
We now let qAllocMore reign in growth decisions.
Change-Id: I843a89dcdc21d09868c6b62a846a7e1e4548e399
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This patch improves performance when constructing a custom type in
a QVariant by ~ 7-20% (instructions count) depending on the type size
and metatype attributes.
Change-Id: Ic2707ff5abd689b66e23c1794f111504bf9b3b01
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Currently QMetaType API contains almost only static methods. This works
nice until someone needs more information or needs to do more operations
on a type. In this case every function call has to do type dispatch.
This API allows to avoid redundant type dispatching, by caching a
type information in a QMetaType instance. It gives significant
performance boost especially for custom types (up to 9x).
Change-Id: I223d066268402e072e41ca1d0a3e7bc160655d7f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
We should not assume that the first type id is 0.
Change-Id: I17ba6ba57e97ebd495904bfd11235fe458f214e5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
UUIDs are a good testcase, because the textual content is all fairly similar.
This also changes data generation to be a little neater now that we're starting
to get multiple pieces of data.
Change-Id: Ie4100a1ca4dbe7bf1cd73de883a9854377ac2f5e
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I79f867fdab295bdbd4c4b3c785dfd7ede520022e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a small QHeaderView benchmark.
It measures visualIndexAt, hideSection, showSecion, moveSection,
insert, remove and trunc rows.
Change-Id: Ibca6a2e130f4ab27d68f51e5e341a78579abd1bf
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Commit 4b8ceb41ae added the requirement
that pointed-to types need to be registered when registering pointer
types. Unfortunately, the implementation also affects function pointer
types.
This change whitelists 0, 1, 2 and 3 argument functions as not deriving
from QObject, forgoing the need to workaround details of the type
registration implementation when registering those function pointer
types.
Change-Id: I4d855e9d70a8179a6e31b84623ad5bf063e0d6d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added a bit of documentation to the Java-like hashing function.
Change-Id: I3f44eee305d91b76f0f89cd1acf21f6430b9482b
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Change-Id: Ib5abc171fb8fb70e2f73ac92ca22dc09146d8a55
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QtWidgets and QtDeclarative now both have their own versions of these
so there's no need to keep them around any longer.
Change-Id: I9c2201c8495a0a0816e2af16c8f647fcad991479
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is no reason to keep two separated core types sets. It
couldn't be fixed before Qt5 because of binary compatibility promise.
This patch merges QMetaType core types with ext core types.
This "simple" operation consists of:
- QDataStream version was incremented, because type ids are
saved in QVariant's data stream.
- QMetaType LastExtCoreType and FirstExtCoreType were replaced by
LastCoreType, FirstCoreType and new QMetaType::HighestInternalId.
- New tests checking QVariant data stream for Qt4 and for Qt5 versions
were added.
Change-Id: I02dd74d29317365c297a789a4eb7c9c5edc3b231
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This imports the JSON support for Qt 5 from
playground/qtbinaryjson.
It adds a fast, fully compliant json parser, a
convenient C++ API, conversion to and from
QVariants and a binary format for JSON that is
extremely fast to use together with the C++ API.
Change-Id: If9e3a21a4241d388d0abaa446b6824f9cc6edb1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a source incompatible change for Q_DECLARE_METATYPE(T*),
which now requires T to be fully defined.
The consequences of this are:
* Forward declared types can no longer be declared as a metatype.
(though this is a very uncommon thing to do).
There is a trivial workaround where necessary.
Change-Id: Id74c40088b8c0b466fcd7c55abd616f69acc82c8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It isn't necessarily that hashing the whole string is the main problem, as the
recently added java string benchmark appears to show, which means the original
purpose of this benchmark is rather voided.
This removal allows gradually repurposing the test towards providing general
benchmarks of QHash performance.
Change-Id: Iaab0a3b493387dcce99240632342235ed9c44d88
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
main.cpp is easier for my muscle memory to remember than qhash_string as it is
used by a number of other tests.
Change-Id: I044f995d55a4ff1328dde0ae27b6e36a80114c38
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Based on the unit test for data production.
Change-Id: I88a411c0079b251d3682c3fbf9fe7ed1b5457a7e
Reviewed-by: Anselmo L. S. Melo <anselmo.melo@openbossa.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
This uses a similar runtime to the approach of sampling part of the string, with
the benefit that it doesn't reduce the sampling to subsections of the string.
Ironically, Java used to only sample parts of the string as well, but found that
it produced too many collisions with certain string types, so they moved to use
this method.
RESULT : tst_QHash::qhash_qt4():
0.0537 msecs per iteration (total: 110, iterations: 2048)
PASS : tst_QHash::qhash_qt4()
RESULT : tst_QHash::qhash_faster():
0.015 msecs per iteration (total: 62, iterations: 4096)
PASS : tst_QHash::qhash_faster()
RESULT : tst_QHash::javaString():
0.016 msecs per iteration (total: 66, iterations: 4096)
Change-Id: Icb5da341ab6445163f4217650a0bdb3903e50210
Reviewed-by: hjk <qthjk@ovi.com>
Note: This constitutes a break in Binary Compatibility.
Change-Id: I050587901725b701f20dd46475ae48aec28aa54d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It is mostly not used (most places in Qt use typename directly), so
is already not very useful.
For example typename is used in:
QDataStream& operator<<(QDataStream& s, const QVector<T>& v)
Change-Id: I85337ad7d8d4ebbb424bfa2ab9a356456ff3e90f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
We're trying to deprecate these, so don't use them anymore.
The inline uses of these have been left intact, for the moment. Inline code will
need to create their own non-inline allocation methods (for future-proofing to
allow alterations in how e.g. individual containers allocate)
Change-Id: I1071a487c25e95b7bb81a3327b20c5481fb5ed22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
, and make it strictly a POD struct.
Since this operator was only being used to set the initial (owned) value
of the reference count, the name of the function introduced here to
replace it makes that use case explicit.
Change-Id: I2feadd2ac35dcb75ca211471baf5044a5f57cd62
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added emition of a slot connected using the new syntax, as well as a
functor
- Replaced the old connect_disconnect_benchmark by a new one. The old
one was of little interest as it tried to connect to every signal,
producing a lot of similar results.
The new test tests different ways of connecting and disconnecting
Change-Id: I3c04c24027252308f8942bcd9562110104cdb4e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Function pointers used as template parameters must have external linkage
according to the C++ standard. The _mm_lddqu_si128() and
_mm_load_si128() intrinsic functions are declared static in most
implementations, which means we need to wrap them in a non-static
function call to be used.
Change-Id: I4e316851df890d77999649d47654f7f9a35d4080
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pull in recent changes in the 4.8 branch for the QMutex benchmark.
Change-Id: Ie1e9bff33cecafb36d3d12207100f09f99597f8e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I48ab0ee64d8348cada2e6c7b27c67b6bbc36280d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Add new cases for custom types and QStringList.
Change-Id: I79f8d415be43774e6b2488e8a6a8028bf4a5fd45
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I33b2cf1e833fc6b1d0b3525018945148ba2d3492
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Which required porting the related unittests to qstandardpaths
Change-Id: I6eb63c46845f05cd29cc42b59872707526277c90
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
create() is symmetric with destroy().
Also rename the internal methods and fields to be
consistent (qDeleteHelper already had the "right"
name, though!).
This change will allow us to use construct() and
destruct() for something else: Placement new-style
allocation (QTBUG-12574).
The old construct() is still kept for now, until
the other repositories have been updated to use
create().
Change-Id: Iceb184af6cffcb0a634359cfc3516c718ba0c2f5
Reviewed-on: http://codereview.qt-project.org/6342
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Change-Id: Ifd15f72e2c553fba0c399c921957c4e955bb590d
Reviewed-on: http://codereview.qt-project.org/5191
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The benchmark isn't exhaustive, but tests the functions
that are heavily used by QtDeclarative.
For performance reasons, QtDeclarative has its own
implementation of various QChar functions (in
qdeclarativeutils_p.h). But we want to make the actual
QChar functions as fast, so that QtDeclarative can also
use them.
Change-Id: Ic25f30651224c39f2824380d679b8500739f38c3
Reviewed-on: http://codereview.qt-project.org/4900
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
a) don't detach until an occurrence found
b) don't memmove every time an occurrence found
c) truncate quickly )
well, numbers are better than words:
before:
RESULT : tst_QList::removeAll_primitive():
2,617,902 CPU ticks per iteration (total: 261,790,171, iterations: 100)
RESULT : tst_QList::removeAll_movable():
2,547,540 CPU ticks per iteration (total: 254,753,960, iterations: 100)
RESULT : tst_QList::removeAll_complex():
16,852,099 CPU ticks per iteration (total: 1,685,209,906, iterations: 100)
after:
RESULT : tst_QList::removeAll_primitive():
73,520 CPU ticks per iteration (total: 73,520,442, iterations: 1000)
RESULT : tst_QList::removeAll_movable():
90,422 CPU ticks per iteration (total: 90,422,464, iterations: 1000)
RESULT : tst_QList::removeAll_complex():
9,667,073 CPU ticks per iteration (total: 9,667,072,670, iterations: 1000)
Merge-request: 1285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit b209fe3b1a51f64541067917e96de99f14ad65f3)
Change-Id: Ia26036ed741cefcf4b5868b7b2fc5eae8130d3dc
Reviewed-on: http://codereview.qt-project.org/4577
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This doesn't make sense, none of the other benchmarks do it, and it
breaks compilation for a release-only mac build.
Change-Id: I3bc73f670688d413afcae7fa88bab19f7b3dac33
Reviewed-on: http://codereview.qt.nokia.com/4017
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
And added a POD QBasicMutex. (QBasicMutex* can safely be
static_cast'ed to QMutex*)
The d pointer is not anymore always a QMutexPrivate.
If d == 0x0: the mutex is unlocked
If d == 0x1: the mutex is locked, uncontended
On linux:
if d == 0x3: the mutex is locked contended, waiting on a futex
If d is a pointer, it is a recursive mutex.
On non-linux platforms:
When a thread tries to lock a mutex for which d == 0x1, it will try to
assing it a QMutexPrivated (allocated from a freelist) in order to wait
for it.
Change-Id: Ie1431cd9402a576fdd9a693cfd747166eebf5622
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Also, the runtime for some of these benchmarks is quite long, and some
of them share the same name as existing functional tests. These are
problematic.
Change-Id: I2ca4cfa24c73280a0b73e51423007eaff92085b8
Reviewed-on: http://codereview.qt.nokia.com/1794
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Makes the API symmetric with the other Lighthouse APIs.
Change-Id: I8a399f3c968ea35d4624711b31f2ac5bb94b7893
Reviewed-on: http://codereview.qt.nokia.com/1735
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The distinction between 'examples' and 'demos' is completely blurred at
this point. We've decided, with the SDK people, to scrap the existing
terminology in favor of the word 'example' only -- distinguishing
between code snippets, walkthroughs, "demonstrations" can be done
via keywords or some other method.
Removing QT_INSTALL_DEMOS from all .pro files in Qt is still in
progress.
Change-Id: I86fc0e40d54baa54c5641fc6acbd8b67e4ad2789
Reviewed-on: http://codereview.qt.nokia.com/1034
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Following the RFC4122, provide the interfaces between QUuid
and QByteArray, they are simpler then toByteArray() and
relevant.
Thanks for the suggestion and brief code from Robin Burchell.
Task-number: QTBUG-19420
Reviewed-by: joao
(cherry picked from commit 06873e467d98ad60d827afae29500bf2ff783c03)
Change-Id: I4623ae3363f1d5affa45de73fac616bb67a9eaa1
Reviewed-on: http://codereview.qt.nokia.com/168
Reviewed-by: Liang Qi <liang.qi@nokia.com>
On Mac, MAP_ANONYMOUS and MAP_POPULATE are not defined.
Fix MAP_ANONYMOUS by defining it to MAP_ANON.
Fix MAP_POPULATE by removing it, because its usage was unnecessary in
this code (the page was explicitly faulted in a few lines later anyway).
Change-Id: Iead82e1a949b35fe3c304d38babac8d4dc6f0769
Reviewed-on: http://codereview.qt.nokia.com/162
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Preprocessor directives that refer to QT_VERSION's less than Qt 5 are
redundant in the qt5 modules.
Change-Id: Id3a9c5f0ba07b72d1c99e51c12a240570bf0d58e
Reviewed-by: Rohan McGovern
The test case freed the wrong pointer, causing crash in Symbian devices.
Task-number: QTBUG-17489
Reviewed-by: Janne Koskinen
(cherry picked from commit 02bb8e4c5f4584f3c0a7ed16bcba20c7f43456cd)
When modularized, the benchmark test case might not have access
to the JavaScriptCore source code. So, make sure the test case
still compiles in this case.
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
