Because it's BiC.
From the API review.
Pick-to: 6.3
Change-Id: I69f1fe58428241a876ae9058e8a0108a8e496c22
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During delivery of a pointer event, another type might be synthesized
from it; and we are not yet "done" with all access to the original event
until the delivery of the synthesized event is completed. Further,
there could be a nested event loop if exec() is called on a dialog.
If QPointingDevicePrivate::pointById() causes activePoints to grow
(for example if we handle a fresh incoming touch event in the nested
event loop), reallocation could cause the persistentPoint reference near
the top of processMouseEvent() to be dangling by the time we get to the
bottom; so we need to call queryPointById() again to be sure to get the
persistent QEventPoint that is actually used in the current mouse event
to ungrab.
Fixes: QTBUG-97157
Pick-to: 6.2 6.3
Change-Id: Ib3b90eef5db691675b03474fd75981e972d11d2d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the positions were large enough, we would get precision errors
with the floating point numbers.
We calculate the relative position:
dpos = pos + dashes[istart] - doffset - estart
and then later
pos = dpos + estart
If estart is a huge number (range of 10^18) and dashes[istart] is
a low number (10^1), then estart + dashes[istart] == estart and
the loop will never progress, dpos will be 0.
Since the loop should never iterate more than dashCount times
(since we cut away all full dash sequences before entering it),
we add a failsafe that exits the loop if it detects the error.
Fixes: QTBUG-99690
Pick-to: 5.15 6.2 6.3
Change-Id: Ia6a42f21b6b4c6adf5cdd703b6483750513a88ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use alternative method for finding searchPath since
QT_TESTCASE_SOURCEDIR did not point to a correct location on webOS
QEMU test environment.
Fixes: QTBUG-99954
Pick-to: 6.3
Change-Id: I05f95b4aa02027976036d0842ca564a602e01d0e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It's more efficient than our QThreadStorage and definitely much better
than the Q_GLOBAL_STATIC+QThreadStorage solution. We can do this because
the last compiler not to have thread_local support was MSVC 2013, which
is no longer supported since Qt 5.11.
QThreadStorage also managed the lifetimes of pointers for us, so the
equivalent thread_local requires std::unique_ptr.
Change-Id: Id59bdd8f1a804b809e22fffd15405f1b394c48d8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When QCborValue referred to an empty array or map, toArray() and toMap()
would respectively return the default value instead of the empty object,
as expected.
Pick-to: 6.2 6.3
Change-Id: I5e52dc5b093c43a3b678fffd16b60456d0037ad7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of duplicating two dynamically-initialized statics each in two
functions, causing four threading guards to be emitted by the
compiler, pack the two variables into a static struct and the struct
into an Extracted Method, leaving just a single threading guard.
https://godbolt.org/z/a9e5o848f
Uses C++14 NSDMI-in-aggregates, so doesn't work in 5.15.
Pick-to: 6.3 6.2
Change-Id: I98e053df48aafd5720ceffd514d6811fd3b28b1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Qt6QmlMacros uses the value of GNUInstallDirs's CMAKE_INSTALL_LIBDIR
to calculate the rpath from a Qml plugin's location to the Qt
libraries.
By default CMake detects the value of CMAKE_INSTALL_LIBDIR, and on an
RHEL system it is set to 'lib64', whereas we usually configure Qt with
the lib dir set to just 'lib'. This might cause issues with Qml
plugins not locating the Qt libs due to an incorrect rpath.
Ensure that when building Qt libraries and plugins,
CMAKE_INSTALL_LIBDIR is set to the same lib dir value that Qt was
configured with.
Pick-to: 6.3
Fixes: QTBUG-99707
Task-number: QTBUG-100432
Change-Id: I17b2a22d46ef3b40084a2f6a4992f0e23b35d4d3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The call becomes simpler, and QCollator no longer needs to befriend
QString.
Pick-to: 6.3
Change-Id: Ie2c977dc39973423f07563a0702a83fa3c75270d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Specifying the options would do nothing, so it's better to error out
early in case the developer accidentally added them.
Pick-to: 6.2 6.3
Change-Id: Ia516468a22c3c48e9e84dc78e522e8870186d96b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The option is used to specify a list of Qt repos (git submodules)
that should be included in the configuration of a top-level Qt build.
The option takes a comma-separated list of qt submodule names e.g.
'qtbase,qtsvg,qtdeclarative'
It can also take a single value like 'qtbase' or 'qtquick3d'.
Each specified submodule and all of its transitive dependencies will
be included when configuring the top-level Qt build (assuming that the
submodules have previously been already checked out).
Any missing submodules or dependencies will not be automatically
checked out, but rather skipped. This can result in a failed
configuration if a required submodule is missing.
If some optional transitive submodule dependency is not desired in the
build, you can combine the -submodules option together with -skip
options.
E.g. configuring with
-submodules qtdoc,qtnetworkauth -skip qtmultimedia,qtimageformats
will result in a top-level build with the following submodules:
- qtbase (common dependency)
- qttools (dependency of qtdoc)
- qtactiveqt dependency of qttools)
- qshadertools (dependency of qtdeclarative)
- qtdeclarative (explicit)
- qtnetworkauth (explicit)
- qtdoc (explicit)
Pick-to: 6.2 6.3
Fixes: QTBUG-100388
Change-Id: Ie8c47cfd1d1e0e44a27260bf9ddf968531cc1cc0
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This makes skipping a list of submodules more concise.
e.g. instead of passing
-skip qtsvg -skip qtimageformats -skip qtmultimedia
pass
-skip qtsvg,qtimageformats,qtmultimedia
Pick-to: 6.2 6.3
Change-Id: I6a48828b2fd7cec9f6e19988f7b4033333768abb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Fixes errors like
In file included from
qtbase/include/QtCore/6.4.0/QtCore/private/qcore_mac_p.h:1:
qtbase/src/corelib/kernel/qcore_mac_p.h:61:9:
error: unknown type name 'mach_port_t'
Amends e05300163e
Pick-to: 6.2 6.3
Change-Id: I8f4c579e9b8ef187859497361c4e126a486a543c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There are issues when building examples as external projects in the CI
in child repos like qtsvg.
QEMU configurations fail to find some CMake Config files, Windows
configs fail to find libraries.
Until these issues are fixed, build examples in-tree (without using
external projects) like we did before.
Temporarily disables 98c89c8cc1
Pick-to: 6.2 6.3
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Change-Id: Ia4b39812b27cfde5f5a103fd39cc1cb032842643
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use Q_CORE_REMOVED_SINCE macro for fromAce()/toAce() API changes.
Pick-to: 6.3
Change-Id: I057c6d648c2141929f04e4b4c4a38ba3275261ab
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use Q_CORE_REMOVED_SINCE macro for languageToCode()/codeToLanguage()
API changes.
Pick-to: 6.3
Change-Id: I8cc5279b1272165541c345241af49523c0f25737
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When QFont::PreferNoHinting is set, we disable the automatic
grid-fitting done by DirectWrite in order to get shapes as close
as possible to the original design.
[ChangeLog][Windows][Text] Automatic grid-fitting is now disabled
for fonts that set QFont::PreferNoHinting.
Change-Id: Idfd3707153799bb8aa13f0d23e4dd6f1893ce53d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Switched to use runtime path instead of compile time path for the
helper executable. Some tests cases were failing on webOS because of
wrong path.
Fixes: QTBUG-99846
Pick-to: 6.3
Change-Id: I566bc04bdb96ac6e7dd0a875eadb50685aef8282
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It leaves the system in a state that breaks at least one later test,
so put it last. (This was first seen when picking back to 6.2, but I
am now able to reproduce it on dev.)
Amends commit 78eac57f3d
Pick-to: 6.3
Change-Id: I918cf43cdfc27357329a175518d6f9755747bae5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QSinglePointEvent ctor assumes that the given globalPos is correct,
so it was wrong that the QHoverEvent ctor passed along a local position
as global. It's better to require globalPos as an argument; and in fact
it seems that everywhere we construct a QHoverEvent, global position is
available, or possible to get by transformation (which is better than
resorting to QCursor::pos()).
Also, don't convert to QPoint: pointer events have qreal resolution and
there's no reason to truncate them.
Fixes: QTBUG-100324
Change-Id: I919455da36265988d3d149eb97563c9ed0d2c660
Pick-to: 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
On X11 we already had to wait as window managers might scroll windows
in. On macOS we also waited - albeit a bit shorter - also because
screens scroll in slowly.
We didn't wait on Windows, and on Windows the test is quite flaky.
Attempting to make it run stably by waiting for long enough so that all
paint events are flushed to the screen.
As a drive-by, break some overly long lines.
Task-number: QTBUG-100412
Pick-to: 6.3
Change-Id: I49b1e447aced2fe1af3c5d30b514f8df3cc1813c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rename the `failureLocation` variable to `messageLocation`, as
it does not necessarily contain information about a failure.
Change-Id: I9e78dc76c8111c78e34c36f6623e9a8cc9e4764e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A default-constructed QPluginLoader erroneously reports that the
load hints are empty. However, setting a filename would then
automatically set the PreventUnload hint, surprising the user.
Return the correct flags instead.
Amends 494376f980
Change-Id: I7a95964cb680afd3adf2f71ed73d2f93023238f2
Fixes: QTBUG-100416
Pick-to: 5.15 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When running a test under increased verbosity levels, QTestLib would
print "failure location" for every QTest function (QVERIFY, QCOMPARE,
...), even if there's no failure at all.
Keep the code centralized, but split the formatting of failures and
non-failures (other messages).
Task-number: QTBUG-96844
Change-Id: I3c508653176b68579dc0eb0cffcc153a52da2e2c
Pick-to: 5.15 6.2 6.3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is an important and useful part of the API contract that the
QFutureWatcher signals will emit complete information after
setFuture() on an already started QFuture. If that wasn't so, some
API clients would need two code paths to gather state and progress
information: one through the signals for not yet started QFutures,
and one through the state querying APIs for already started
QFutures.
The previous documentation was not precise enough to rely on, even
though the implemented behavior - cf.
QFutureInterfaceBasePrivate::connectOutputInterface() -
seems well thought out and implemented to rely on.
Pick-to: 6.3 6.2
Change-Id: Iaf3db37a851f07ac85881adaea5c83612a7fd843
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Remove a couple of unnecessary string literals that only coped with an
impossible situation (default return after a switch that cover all the
enumerators).
Add a Q_UNREACHABLE() for good measure.
Change-Id: I8065218554edf98408d9c0823b8c301932681c59
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Avoid, for years before the first rule, a whole lot of complications
needed when handling dates later than that rule's start. It is not
entirely clear the code would previously have Done The Right Thing; it
now is clear what it does.
Change-Id: I00a79c0a4733f1deb0bbfecb03e1c64a104d08a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
While investigating an assertion failure I noticed that the existing
tests didn't even exercise these methods for local time or zone time.
Of course, we can't robustly test these time-specs, due to vagueries
of offset details and zone availability, but we can at least verify
that they return date-times on the specified date. Add a test-case for
the start of 1900, on which the assertions were first seen; it is the
earliest moment representable with tm_year >= 0, after all.
One of these tests fails on 6.2 but the fix for that (as opposed to
the the assertion) requires 6.3's improvements to the handling of
time_t's fuller range - too risky a change to pick back to 6.2.
Pick-to: 6.3
Task-number: QTBUG-99747
Change-Id: I98f5d7850a701972b2d8ea2ce203a2b3e7071354
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When passing a directory to qmake, it tries to detect a .pro file in
that directory. Whenever the detection failed, qmake printed an error
message like "Access is denied." or "file to open is a directory".
Now, qmake prints an actually helpful error message:
***Cannot detect .pro file in directory '../foo'.
QMake expects the file '../foo/foo.pro' or exactly one .pro file in
the given directory.
Fixes: QTBUG-34673
Change-Id: I3d21ead247734172eee4eb68d3f9782d3ddaea52
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The C API we've used so far underlies stronger restrictions regarding
path length than QFile. Since qmake is not bootstrapped anymore, we can
use QFile.
Task-number: QTBUG-99791
Change-Id: Ic7765b0c09a8aa07c208c1b1d02efe0c54bb44f2
Reviewed-by: Dominik Holland <dominik.holland@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The diagonal resize cursors provided by Qt does not
quite look like the ones used everywhere else on macOS,
especially for scaled desktops. After some googling this
seems to be how everyone else uses the native versions
since they are private API.
Pick-to: 5.15 6.2 6.3
Change-Id: I3461d07638f4e49cd3e25ab65ef5aa65730bb3a6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtGui] Clipping of visible glyphs when doing
partial updates of a graphics view was off by 1. Also fixed
an issue that caused rounding errors when transforming
the clip rect into the glyphs draw space which was caused
by transforming a QRect instead of a QRectF.
Fixes: QTBUG-93432
Pick-to: 5.15 6.2 6.3
Change-Id: Ibdb0e4116872af0f88bf03d9b3ac95331058b882
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
qt_internal_undefine_global_definition disables an internal global
definition that is defined by the qt_internal_add_global_definition
function for a specific target.
Remove the ability to set the custom "undefine" flag for the
definitions since it's hard to control it using the introduced
function.
Pick-to: 6.2 6.3
Task-number: QTBUG-100334
Change-Id: Ic1637d97aa51bbdd06c5b191c57a941aa208d4dc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
To support clang-cl builds, until we add the necessary logic to enable
function targets for this case.
Pick-to: 6.3
Fixes: QTBUG-98253
Change-Id: Ied296babaa85a13321663d50019fad49134f0f44
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Not MSVC, but pretends to be.
Pick-to: 6.3 6.2
Change-Id: I5c201dd917e79a22d6ef15715bf1d3a7010d123e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The slots connected to rowsAboutToBeRemoved and columnsAboutToBeRemoved
attempt to find a new current index by scanning the model around the
existing current index -- in case that index is indeed about to be
removed.
The problem is that the scanning was done without any sorts of bounds
checking; instead it was relying on the model's index() to return an
invalid index for an out of bounds request.
Fix that by adding bounds checking. Since models are not supposed
to return invalid indices for in-bounds index() calls, added some
warnings if that happens.
For some reason, the code handling rows and columns isn't perfectly
symmetrical. Rows are searched both forwards and backwards, while
columns only backwards, and the related code is slightly different.
Filed QTBUG-100273 to try and understand what's going on.
Change-Id: I7452d8c521e74daa4408e6cc969ce5a6059f53ea
Pick-to: 5.15 6.2 6.3
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In 63eea5e5c69434871eaef9d9dc7184d7e54d7276, the
Qt::ItemNeverHasChildren flag was introduced. QFileSystemModel
was modified to use this flag for items which are not directories,
but only if the QFileSystemModel is not read-only and
the directory is writable.
This patch modifies QFileSystemModel to use the ItemNeverHasChildren
flags also if the model is read-only and if the item
is read-only.
Amends 63eea5e5c69434871eaef9d9dc7184d7e54d7276
Change-Id: Ie7f7d58ecf7baade93f9f03d120da84d3c005d42
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Looks like Integrity doesn't deal well with external test data either.
Pick-to: 6.3
Change-Id: I8beb5ac4d2440d40a7efdceae973e430a2354e9d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Amends e3b2b12a91, which made the
style sheet calculate the font-dependent text size, but didn't
add the space needed for the close button or a tab icon.
QTabBar's layout code already adds the space needed for icons
and margins to the size; so instead of overwriting that size,
subtract the size needed by the normal font, and then add the
size needed for the font form the style rule, considering both
vertical and horizontal tab bars.
Fix the test case to style only one tab rather than the entire
tab bar, otherwise the font is applied to the entire tab bar,
and not just to a specific tab, which is the style sheet style
code in question.
Pick-to: 6.2 6.3
Task-number: QTBUG-6905
Change-Id: Ieed0ba146a32e81229419adecaf41f467cfd5959
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Adds a new state Phase1 to QAuthenticatorPrivate::Phase which is used
when authenticating using Ntlm. The new state forces an emit of the
authenticationRequired signal and tracks that it is called only once.
Fixes: QTBUG-44096
Pick-to: 6.2 6.3 5.15
Change-Id: Icc9662d4fdc1f0f8c8e8bc5538f211baaa055d4c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Task-number: QTBUG-100362
Change-Id: Ib09aec5ea03867163d476a2c92562bc949fc1b1a
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The code was trying to avoid a detach in the case no element needed to
be removed, by first running find_if() on const_iterators, and then,
after converting its result to (mutable) iterators, start the
remove_if() algorithm where find_if() left off.
But this applies the predicate to the element found by find_if() (if
any) _twice_: first just before we exit the first find_if() and then
just as we enter remove_if(), which will start by running find_if()
again, with the result of the initial find_if as 'first'.
Apart from being needlessly inefficient, this violates the
specification of Uniform Erasure, which defines sequential erase_if()
as being equivalent to remove_if() + container erase(), with the
former being specified to apply the predicate exactly once per
element.
Fix by writing the remove_if() part by hand.
Instead of doing the dance with the loop invariant documentation
twice, simply implement erase() via erase_if() (complicated a bit by
the weird passing of predicates by lvalue reference instead of by
value, as would be idiomatic). This exposes users to:
[ChangeLog][QtCore][Potentially Source-Incompatible Changes] A fix in
the implementation of the erase-like algorithms of sequential Qt
container may re-enable signed/unsigned comparison warnings previously
suppressed by having occurred in std library code. To fix, cast the
value to look for such that it has the same signedness as the
container's elements.
... but the issue would be the same had we inlined std::remove()
instead of passing a lambda to sequential_erase_if(), so it's nothing
we can, nor should, work around.
[ChangeLog][QtCore][Containers] Fixed a bug in the implementation of
most sequential Qt container's erase-like algorithms (member
removeAll()/removeIf() and free erase()/erase_if()) where the equality
operator or the predicate, respectively, was applied to the first
matching element twice. Each element is now tested exactly once.
Pick-to: 6.3 6.2
Change-Id: Ib6d24b01b40866c125406f1cd6042d4cd083ea0d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Some calling code did this beforehand, other didn't. Now, the function
itself checks for an existing handler before doing anything else.
Change-Id: I8fc43fb8788c9dfe825b15ffa2fa69ee43915cd6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The default value was true, which is non-zero, forcing the variable
out of the BSS and into the DATA segment.
Fix by inverting the meaning so the default value can be false.
Since qt_is_gui_unused sounds a bit complicated, however, take a cue
from the variable's only writer and rename it qt_is_tty_app.
Pick-to: 6.3
Change-Id: I198e9786f7e71178d69fecb5179287bf39b3a1d6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
