Amends 4f4a8e75ab, after which
QItemSelectionModel printed a warning when destroying the model.
We reset the selection model in response to the model getting destroyed,
and since the model is already set to be nullptr at this point the
select() function complains about changing the selection with no model
set being a no-op.
Fix this by not calling reset() when the model gets destroyed - the
stored selection and currentIndex are already reset at this point -
and instead only call reset() when a new model is set in initModel.
Fixes: QTBUG-117200
Pick-to: 6.6.0 6.6 6.5 6.2
Change-Id: I12fc6b3fb2f2ff2a34b46988d5f58151123f9976
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If the QCommandLineOption doesn't have a valueName, the parser won't
read the argument, therefore returning an empty value. If the developers
are calling ::value on the option, they clearly think it's expected to
get a value but won't ever be getting one, so we better warn them about
it.
Change-Id: I434b94c0b817b5d9d137c17f32b92af363f93eb8
Reviewed-by: David Faure <david.faure@kdab.com>
It's been available since C++17, and since we compile the trait
anyway, using it will probably speed up instantiation of qSwap()
(didn't test, just guesstimating).
Change-Id: If77ca71a8021a73edf4864bdd9e5fce517dcabb1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The qSwap() function needs std::swap, so include <utility> manually
instead of relying on transitive includes.
Pick-to: 6.6 6.5
Change-Id: If1331e1eabb55542eac7477522a8e906efb5379f
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Just "QSWAP_H" is a bit meager to be unique. We don't really have a
monopoly on q-prefixed function and header names, there's the C std
function qsort(), e.g...
So use a somewhat more unique name as header guard.
Pick-to: 6.6 6.5
Change-Id: I554fa224afcb6858b752e8044ef3c03dfc69c084
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
It's now documented in qswap.qdoc.
Amends 9c706e2567.
Pick-to: 6.6 6.5
Change-Id: If6138df419dee165e9f1de4c0a0d68af1dcfaa42
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Use recursive descent to handle parentheses in config condition
expressions. This fixes cases like 'NOT (A AND B)'.
Fixes: QTBUG-117053
Change-Id: Iab1b6173abe00d763808bb972a9a5443ffa0938d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
By using a while loop instead of a foreach(RANGE), we can simplify the
code and remove the skipNext variable.
Also, we need to access the last used iteration index in a future
commit. This is not possible with a foreach loop without saving the
index in another variable.
Change-Id: I39306a0105fb31a6a8f39e9d4c47ee3424599a2b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
All of the continue() statements are not needed. There is no code after
the if-else chain.
Change-Id: I16188d14b4f05cb1e5f29bac4657149c4fce60a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Rephrase hard-to-read sentence.
Replace 'integral type; with 'numeric type', as this seems
to be the terminology in the standard:
The type-specifier-seq of an enum-base shall name an integral type
Finally, no need to use \sa for a method that is mentioned right before.
Pick-to: 6.6
Change-Id: I543041e78cc09ccd58182db454880941592c74ae
Reviewed-by: Andreas Eliasson <andreas.eliasson@qt.io>
Move the rsslisting example documentation to examples/network/doc,
as it is done for all the other examples.
Fixes: QTBUG-117215
Pick-to: 6.5 6.6
Change-Id: If83202825afe8c69cb7fda0f84ca4832cf3d60e7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added to the list of important links on the Android Platform home page.
Task-number: QTBUG-116780
Pick-to: 6.2 6.5 6.6 6.6.0
Change-Id: Id65a73d56bff0b288ebb1da098f6dbd8cbbe606e
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
- Macros provide possibility to use enums in QML via QtNetwork QML module
Task-number: QTBUG-115056
Change-Id: I1ed96a7eb4b12681d16137528307fec6db5b016c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Fix shared libraries build error:
undefined symbol: _ZN16QNativeInterface7Private14QWaylandWindowD0Ev
We are declaring QWaylandWindow for all Q_OS_UNIX in
qplatformwindow_p.h, and must include the definition
as well.
Change-Id: I630538af475524659e9a476171994e600f2ec668
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtWidgets][QDockWidget] A floating dockwidget that doesn't
have the DockWidgetClosable feature flag set can no longer be closed by
a call to QWidget::close or a corresponding keyboard shortcut (such as
Alt+F4).
Fixes: QTBUG-116752
Pick-to: 6.6 6.5
Change-Id: I7859a2eed11f0e4ee013f7f56611e282e9bcae9a
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][CMake] Added variable QT_I18N_NATIVE_LANGUAGE to specify the
native language that is used in the source code for translatable
strings.
[ChangeLog][CMake] Added keyword I18N_NATIVE_LANGUAGE to
qt_standard_project_setup to conveniently set QT_I18N_NATIVE_LANGUAGE.
Task-number: QTBUG-115845
Change-Id: I079256507685afe5eccda78beffff819292494bf
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This serves as regression test for future fixes of the config condition
evaluator.
Task-number: QTBUG-117053
Change-Id: Ib05fe5f5fb6aa2d440ecbc8affaf99b040553c06
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Some graphics drivers do only create a surface with the help of
gbm_surface_create_with_modifiers and others do require to use
gbm_surface_create. So it is needed to probe these.
Change-Id: I9ea657f12f2ea23ec426a378cfd67e297cb2d310
Pick-to: 6.5 6.6
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The custom matching function was added in 4d4857027db3 with the rationale
that people were mixing up Key_hyphen and Key_Minus all the time, and
tried to solve it by treating the two as one and the same in the match
function.
Unfortunately this doesn't work in practice, as when a keyboard event
comes in we resolve a set of possible key sequences from that, and then
look those up in the list of sorted shortcut sequences. That lookup
is just a binary search, and does not take into account the added
logic of the custom matching function. So the binary search will fail
to find the matching key sequence, and as a result we never get a chance
to call matches() with a potentially malleable key sequence (for example
Qt::Key_Minus when the shortcut is Qt::Key_hyphen or vice versa).
The only case we do hit the matches function is if we by chance happen
to land the binary search iterator on the "unmatched" shortcut, e.g.
Qt::Key_hyphen, but this relies on there not being any other shortcuts
that sort between Qt::Key_Minus and Qt::Key_hyphen.
Task-number: QTBUG-116873
Change-Id: Iaa90991911f32276e29e37e8c7ae87643898bfc9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The state machinery of QShortcutMap is complicated enough as it is,
so let's use better variable names. In particular, let's distinguish
the registered shortcuts (QShortcutEntries), from the candidate
QKeySequence sequences that we compute based on the incoming events.
Task-number: QTBUG-116873
Change-Id: I9bd59097e786ecfb9d241c2eb7b871a4bba9b44f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since the interface was introduced as \preliminary in commit
9d16d5e224, everything mentioned
as required to make it a publicly documented interface has been
implemented:
1. An a11y bridge for macOS/VoiceOver was implemented in
98e4e992fe
2. An a11y bridge for Windows/UI Automation was implemented in
4f9c66131d
3. An a11y bridge for linux/AT-SPI was implemented in
ece2feee03
4. QAccessibletable implements the interface
(see 092bbc9ad3) and
an implementation in QAccessibleTabBar is pending in
Gerrit
[ChangeLog][QtGui][QAccessibleSelectionInterface] The
QAccessibleSelectionInterface that was added as preliminary in Qt 6.5
is no longer preliminary. Exposing selection to assistive technology
can be achieved by implementing this interface.
Change-Id: Ic6fbc67ada32122da58ce94fa0581a27ecb2ac48
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When loading the fonts, we go through all the named instances
and register these as subfamilies. In addition to exposing these
variants by style name, we also register them with the according
weights, italic style and stretch. This adds a field to FontFile
to allow piping the instance index through to when we instantiate
the face.
[ChangeLog][Fonts] Added support for selecting named instances in
variable application fonts when using the Freetype backend.
Task-number: QTBUG-108624
Change-Id: I57ef6b4802756dd408c3aae1f8a6c792a89bee6a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The logic was a bit convoluted, using a do-while loop when the
base premise still was that we needed a valid iterator, and
hiding the check of a QKeySequence::NoMatch to break out of
the loop far from the match() that produced it.
The tempRes (now match) variable no longer has to live outside
the loop, and the oneKSResult variable has been renamed to
clarify its use.
Task-number: QTBUG-116873
Change-Id: I730e768eae2e9a653bf4e28ceece2fe7277ef45d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Andrey Butirsky <butirsky@gmail.com>
This makes it source compatible with Qt 6.5 by allowing us to change
FastType to something other than float, which we have done for Qt 6.6 on
systems with AVX float16 instructions.
Pick-to: 6.6 6.6.0
Change-Id: I7ebf0c178ba0ff7f04f6788d182a1a000fe31c0c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The config.redo script can be executed to reconfigure a pre-existing
qt build dir with the configure options that were last passed to the
build.
It just calls the original configure script with the -redo option.
It's nicer than calling configure + -redo manually because you don't
need to write out the full source path for configure.
In qt 5 times this script was called config.status.
On windows the script is called config.redo.bat.
Rename the config.redo file that QtWriteArgsFile.cmake writes to
to config.redo.last, so it doesn't conflict with the name of new
config.redo script.
Amends 5c40cb0f1a
Pick-to: 6.5 6.6
Change-Id: Id47c56a24561410aec6fbaa79b13fc8a78d12ed0
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This prevents the use of the one-arg-to-two-arg adapter template which
we'd remove rather sooner than later, because it's causing all sorts of
problems, but probably can't, until Qt 7.
Pick-to: 6.6
Task-number: QTBUG-116074
Change-Id: I5907da0dc8c01b636d16dcc01e9c808ab9a85081
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Create QString at compile time using the literal operator""s instead of
using pointer to characters. This way, no conversion or allocation will
occur at runtime.
Task-number: QTBUG-117036
Pick-to: 6.6 6.5
Change-Id: I9942ef8efa38de9ac5975799249a65fcb4c966c9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Fix include order to respect the Coding Conventions.
Include individual headers instead of "generic" headers.
Remove QT_{BEGIN,END}_NAMESPACE because these are private Qt macros that
should not be used in the examples.
Task-number: QTBUG-117036
Pick-to: 6.6 6.5
Change-Id: I33f9c54098824bfcfacac7c2f624554e105a291a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
There were multiple documented functions with \relates <QtTypeTraits>,
but the header file itself was not documented. QDoc still created a
proxy page for the header, but the information on it was incomplete;
for example, deprecated functions were omitted.
Pick-to: 6.5 6.6
Fixes: QTBUG-116349
Change-Id: Ic4334a43f72bb8a358cee7537a282495e4a046c6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The XML stream writer previously added namespace declarations with the
same URL as existing ones, but new names, and renamed the XML elements
to use the new namespaces instead of the existing ones.
[ChangeLog] Fix renamed and duplicated namespaces in QXmlStreamWriter.
Pick-to: 6.5 6.6
Fixes: QTBUG-75456
Change-Id: I90706e067ac9991e9e6cd79ccb2373e4c6210b7b
Done-With: Philip Allgaier <philip.allgaier@bpcompass.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qt_install() calls in qt_internal_add_test() did not re-create
subdirectories that are part of the input test data.
Make sure that the subdirectories are created upon installation by
ensuring we specify a relative installation path that includes all the
path parts except for the file name.
That works the same for directories.
Amends ec1546afc4
Amends 540bd6cf20
Amends 1307736c7d
Amends 0a1256a52d
Task-number: QTBUG-117098
Change-Id: Ia80f4e7e1ec531264864bcde3ac192ce79b65746
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Minor cleanup that enables us to change the actual type in some of the
wrapper functions, so that we can implicitly convert a QString to a
jstring.
Change-Id: I2acc99c656231b302269fae439cf3dd49278f09a
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
Java arrays are always objects, also if they don't contain objects.
Pick-to: 6.6
Change-Id: I376c9cc39445d7d9aaac093e4cd6995c8322ed0d
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
This removes the dependency from QJniObject to QtJniTypes, and allows us
to add more useful helpers to types declared through the macros, as we
can rely on QJniObject being fully declared.
Note: this is all undocumented API, so fine to change even though it
currently lives in a public header.
Change-Id: I07478ecb80ae166d619a09aed6820f680afed31b
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
A function not being available if the parameter list doesn't meet the
requirements results in much better error messages than a function not
compiling (somewhere deep in the call tree, potentially) because of it.
Change-Id: If2c320736083a385232cc72f608bc4d61025627c
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
Not only are we subject to Q and P defines, we're also included in the
unnamed namespace now.
Amends df030e06a8.
Pick-to: 6.6
Change-Id: Ie2f4c9f45d9845d8a26140e0e1214e87b615ff02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Simple window with a rotating rectangle that can be
captured using QGraphicsFrameCapture.
Task-number: QTBUG-116146
Change-Id: Ia3b6928e469d926c53260ee40ed5af97dd280c08
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Commit 946f15efb7 added the line
extern "C++" { std::* };
but that was too good to be true. The intention was to catch Standard
Library inline symbols that got emitted in our own libraries, not use of
Standard Library types in our symbols. Unfortunately, that glob
expression matches the demangling literally and return types for
templates are demangled in their usual position to the left of the
function name.
For example,
std::random_device qFoo(); // mangles as _Z4qFoov → "qFoo()"
but
template <typename T> T qFoo();
template std::random_device qFoo<std::random_device>();
mangles as _Z4qFooISt13random_deviceET_v and that demangles to
"std::random_device qFoo<std::random_device>()".
Therefore, we replace that with a full expansion according to the
mangling scheme. This includes a minor fix for the RTTI symbols, to
match nested names too (those with "N" in the name). It can't match
virtual override thunks ("Tv" and "Th"), because those have variable
length names and the matching is done by fnmatch(), not regex.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd178449cf68669cb6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The QVariant(QMetaType) constructor is a major anti-pattern: unlike
*every* other QVariant's constructor, it doesn't build a QVariant
holding the QMetaType object, but a QVariant of the specified type.
Introduce a named constructor for this use case instead.
In principle, this should lead to a deprecation of the QMetaType
constructor... except that it's used everywhere, so I can't do it at
this time.
Drive-by, improve the documentation of the QVariant(QMetaType)
constructor (since it's basically c&p for the new fromMetaType
function).
[ChangeLog][QtCore][QVariant] Added the QVariant::fromMetaType named
constructor, that builds a QVariant of a given QMetaType.
Change-Id: I4a499526bd0fe98eed0c1a3e91bcfc21efa9e352
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The class name was wrong.
Task-number: QTBUG-100236
Change-Id: I0ffd163bf59682d8326feefb76a4cd8b7e106105
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
That we have two macros to declare a C++ type to represent a Java class
is confusing. The TYPE macro as of now allows us to declare array types,
but with QJniArray we won't need that anymore, and can just use Class[]
as the type instead. Changing that will be a follow-up commit; for now,
get rid of TYPE-usages to declare regular classes.
Change-Id: Iea0a9548772ca701148442412cf6ad567583213f
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When calling the (old and outdated) variadic argument overloads of
callMethod (as opposed to the variadic template overloads), then we
cannot pass complex types.
That types declared via the Q_DECLARE_JNI_CLASS macro are trivial was an
implementation detail that we shouldn't rely on as long as those types
are not part of the public API. Cast explicitly to jobject so that we
can make those types proper QJniObjects.
Updating this code to use the new variadic template overloads is for a
follow-up commit.
Change-Id: Ia9d610c84de6f989ef957c23401b1cbc64d2d1ef
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As a drive-by, fix style by adding a whitespace after flow-control
keywords `if constexpr`.
Change-Id: I4e1153edc6f9ee903c7620772c12c411c33e90c6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
[ChangeLog][CMake] Added variable QT_I18N_LANGUAGES to specify the
languages that are used for i18n in the project.
[ChangeLog][CMake] Added keyword I18N_LANGUAGES to
qt_standard_project_setup to conveniently set QT_I18N_LANGUAGES.
The call
qt_standard_project_setup(I18N_LANGUAGES hi ho)
sets the variable QT_I18N_LANGUAGES.
The target finalizers use this variable to set up CFBundleLocalizations
on Apple platforms.
qt_add_translations will be extended to read QT_I18N_LANGUAGES as well
to determine the names of .ts files if TS_FILES is not given.
Fixes: QTBUG-116716
Change-Id: I76f0753d10efb9c32947d9239e43382c9d85eb51
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
