Functions normally found from <sys/socket.h> are available on VxWorks
from <sockLib.h> header.
Change-Id: I2263ec40ba9f37bc95755b633fb43d66ceb2777c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When readData() is called repeatedly, we need to keep track which
part of the multipart message we are currently reading from.
Hereby we also need to take the boundary size into account, and not
only the size of the multipart; otherwise we would skip a not
completely read part. This would then later lead to advancing the
read pointer by negative indexes and data loss.
Task-number: QTBUG-32534
Change-Id: Ibb6dff16adaf4ea67181d23d1d0c8459e33a0ed0
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The one in tst_QLocalSocket::writeToClientAndDisconnect just needed
proper ordering: that's what waitForDisconnect is for. At the same time,
we need to make sure we get the same message from all three
implementations of QLocalSocket::waitForDisconnect (and without the
useless space at the end).
Change-Id: I21364263cf908df022df814a6a39fcb5783e84e6
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The rule for a new override is that it must still work if the old
implementation is called. The catch is that any class that derives from
QProcess and isn't recompiled will still have QIODevice::open in its
virtual table. That is equivalent to overriding open() and calling
QIODevice::open() (like the tests).
In Qt 5.0, QProcess::start() called QIODevice::open directly, not the
virtual open(), so there's no expectation that a user-overridden open()
be called. With that in mind, simply fix QProcess::start to not call the
virtual open at all.
Similarly with QLocalSocket, the calls to open were always non-virtual.
Task-number: QTBUG-32284
Change-Id: I88925f0ba08bc23c849658b54582744997e69a4c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This should have been done in the commit that introduced open
(953255abab), but was missing.
Change-Id: I1c2de4ad5fa42aa5b90646e7d4d7d1b1570a0f87
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
- Don't run this test in parallel
- Remove redundant QT=-gui
- Place the insignificant_test marks together
Change-Id: I078fa29a4dccef9af8798792d06d51835b4b8934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Flip !Q_OS_IOS conditions to Q_OS_MACX where it seems appropriate,
remove a redundant condition in qtextcodec_p.h.
Change-Id: I21c8c0c490f1eb4a9337a7f2f3e907c125489438
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The TXT record is particular because each RR can contain multiple text
strings. So we need to join each RR's texts too.
To make it easy, I've made everything be QStrings.
Change-Id: Ia0506544b913585e7be860c81077cff8e0dab547
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DNS protocol changes the order of the RRs in each reply it sends,
in an effort to balance the load in servers. For most tests, to ensure
that we get always the same result, we simply sort it back.
For MX and SRV, we can't sort because we also need to test that
QDnsLookup sorted correctly according to priority. So instead allow
that test to have multiple alternatives.
Change-Id: I5c119f907b31789de5c9cf2471cc82ecd140d06f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Session tickets can be cached on the client side for hours (e.g.
graph.facebook.com: ~ 24 hours, api.twitter.com: 4 hours), because the
server does not need to maintain state.
We need public API for it so an application can cache the session (e.g.
to disk) and resume a session already with the 1st handshake, saving
one network round trip.
Task-number: QTBUG-20668
Change-Id: I10255932dcd528ee1231538cb72b52b97f9f4a3c
Reviewed-by: Richard J. Moore <rich@kde.org>
I also modified tst_QDnsLookup the test to use ';' as a separator as
opposed to spaces because I added MX and SRV records with multiple
RRs.
Change-Id: I62c7b6ad342c1bb23c4d9ac9730e35ab422e3ea2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
... but rather throw an error, so the HTTP layer can recover from a SSL
shutdown gracefully. In case the other side sent us a shutdown, we should
not send one as well, as it results in an error.
Change-Id: Ie7a56cf3008b6ead912aade18dbec67846e2a87e
Reviewed-by: Richard J. Moore <rich@kde.org>
ignoreProxyFor() always returned true if the no_proxy was not set,
which resulted in the first token being an empty QByteArray, causing
the endsWith() check to always evaluate to true.
Add a unit test that is enabled for those platforms that use the generic
system proxy.
Change-Id: I6081ad5e0b8e2c3fee1568835907c32bde5b7772
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
There is already an enum to disable SSL session tickets, which has been
used to disable session sharing for now. However, SSL session sharing
is not the same as SSL session tickets: Session sharing is built into
the SSL protocol, while session tickets is a TLS extension (RFC 5077).
Change-Id: If76b99c94b346cfb00e47366e66098f6334fd9bc
Reviewed-by: Richard J. Moore <rich@kde.org>
... because SkipSingle was removed in Qt5, and a QSKIP would result in
the SSL tests not being executed.
This can be reverted once QTBUG-29972 is fixed.
Change-Id: I3663ee52f00c3f4391ce78cf63bd444656d79cb3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
In particular, set online state right upon construction of the
QNetworkAccessManager instance. Therefor, QNAM needs an instance of a
QNetworkConfigurationManager internally.
Before, this would only work properly if a network session was created.
Now, networkAccessible() returns the correct status.
Change-Id: I7ff9ccfd18ad376a131fc5977843b55bf185fba0
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
... but only if the QNetworkConfiguration manager requires one.
Change-Id: I1c69c43438f1df9080d207c8598a42201f759c5b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The connection to qt-project.org seems to be the one that causes this
particular test case to fail.
Task-number: QTBUG-29941
Change-Id: Ie5e430646997e86e3acb04132cd90a1773a091da
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It is flakey and often blocks integration.
Task-number: QTBUG-29730
Change-Id: I8acfc243ec6a6782b7f7d78fc27827f3fdc1ce52
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Add intermediate certificates to our server sockets, and to our client
certs.
Change-Id: Ib5aa575473f9e84f337bebe35099506dd7d7e2ba
Task-Number: QTBUG-19825
Task-Number: QTBUG-13281
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Instead of storing a single QSslCertificate for a the local cert, store
a list of them. This will allow us to handle server sockets that use a
certificate that is not issued directly from the CA root in future.
Change-Id: I9a36b9a99daa9c0bdd17f61b4ce1a7da746f2e96
Reviewed-by: Peter Hartmann <phartmann@rim.com>
The "mediumfile" is actually 9.6 MB large, and makes the test slow and
even fail on mobile platforms.
Change-Id: I694d9d38e4d09c8e90a03c1141320fe2a757fdd9
Reviewed-by: Richard J. Moore <rich@kde.org>
It's flakey and is blocking integration. Tracked in QTBUG-29730.
Change-Id: Ia5b8f952314bf2e1aa6dbb5c5c0a97e32e68d0f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
