- Remove class DragLabel in draggabletext and add a static creation
function instead since it only has a constructor setting some
properties.
- Use QRegularExpression instead of QRegExp
- Use new connection syntax.
- Ensure compilation with
DEFINES += QT_NO_CAST_TO_ASCII QT_NO_CAST_FROM_ASCII
demonstrating use of QLatin1String vs QStringLiteral.
- Streamline code.
Change-Id: I2e2ddeb40837dba379990836c77fb72ad7263e2d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Recreate QShapedPixmapWindow when the cursor goes to
another X screen.
Change-Id: Ifd4c4281971b23abc45a9f6c0509832a45c31521
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
[ChangeLog][QtCore][QMetaProperty] write() now resets the property if an
empty QVariant is given, or set a default constructed object if the
property is not resettable
Change-Id: I9f9b57114e740f03ec4db6f223c1e8280a3d5209
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Suffix rules are the old-fashioned way of defining implicit rules for make.
We don't need them as we generate explicit rules for all sources we build.
[ChangeLog][qmake] Makefile output no longer contains implicit
suffix rules, as all sources are built using explicit rules.
Change-Id: I4ecfa5b80c8ae33aea8730836f3baf99dd4951dd
Task-number: QTBUG-30813
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
if t >= QMetaType::User, we would not return false nor call convert.
We would then pass a pointer to whatever is in the QVariant to the
qt_metacall that is expecting a pointer to an object of a different type.
Since we have custom converters, we can call QVarent::convert even for
custom types anyway.
[ChangeLog][QtCore] Fixed crash when setting a QVariant of a different
type to a property of a custom type. Attempt to do a conversion instead.
Task-number: QTBUG-40644
Change-Id: Ib6fbd7e7ddcf25c5ee247ea04177e079f6d7de35
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The list with taken indexes (selected items) was created in reverse
order but then retrieved from beginning. This was causing unexpected
rotation of the moved items.
Task-number: QTBUG-45320
Change-Id: I858d9af7b838bbd2618442c176dac0648b3512c4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
arg(const QString &a, int fieldWidth, QChar fillChar) was being called
and that's not what we want.
Found with clazy static analyzer
Change-Id: Ia5051bb2f979af496038c66580d199262b6cfa8b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Fixes the following warning [-Wnonnull]:
warning: null passed to a callee that requires a non-null argument
Change-Id: I52f7dc338afdcfe0cd605281d1bf59025abb5ac6
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Also re-enable and update the tst_showWithoutActivating test.
Change-Id: Ic7fa9b1bf7637e4661c593aaeabb3220cd4204ff
Task-number: QTBUG-46098
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Make all containers (excepting QVarLengthArray)
- nothrow default-constructible
- nothrow move-constructible
- nothrow move-assignable
- nothrow swappable
[ChangeLog][QtCore] All containers (with the exception of QVarLengthArray,
but including QSharedPointer) are now nothrow_default_constructible,
nothrow_move_constructible, nothrow_move_assignable, and nothrow-swappable.
Change-Id: I12138d262f9f7f600f0e1218137da208c12e7c0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a copy ctor, a move ctor was missing.
Change-Id: If09a4d4c74682169759eff43b298f6c77702c169
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QVersionNumber is now public API.
Change-Id: I5b21b6ce5f1651158b6f29bc6f06e5d4e133bed8
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
OldPersistentIndexes store selected items during sort operation. They
were wrongly taken from static list of indexes. This change takes them
from parent (QTableWidget) who maintains the list of selected segments.
Task-number: QTBUG-48408
Change-Id: Ie1bc4071a275dd76d113d883ab30ccd4cb1fa625
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Commit 7f5b94b47 moved shortcut handling into QGuiApplication (for all
platforms except OS X), due to crashes on Android where the events are
delivered from another thread.
Now that we have synchronous event delivery (also across threads) from
QPA, this is no longer needed, and we can move the code back to QPA,
where the platform has more control over when and how shortcut events
are delivered in relation to normal key events.
Handling shortcuts is as before a two step process. We first send a
QKeyEvent::ShortcutOverride event to the active window, which allows
clients (widgets e.g.) to signal that they want to handle the shortcut
themselves. If the override event is accepted, we treat it as the
shortcut not being handled as a regular shortcut, and send the event
as a key press instead, allowing the widget to handle the shortcut.
If nothing accepted the shortcut override event we pass it along to
the global shortcut map, which will treat the event as handled if
an exact or partial match is found.
The QShortcutMap::tryShortcutEvent() and nextState() implementation
has been simplified to not use the events accepted state for its
internal operation, which removes the need for saving the state
of the incoming event.
The QKeyEvent::ShortcutOverride event was also always sent with
the accepted state set to false, by calling ignore() on it before
sending it. This is now explicit by having shortcut override
events being ignored by default in their constructor, and the
documentation has been updated accordingly.
Change-Id: I9afa29dbc00bef09fd22ee6bf09661b06340d715
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
QT_POINTER_SIZE is determined by the configure test ptrsize,
which has been observed to fail due to unrelated build issues.
Add a check to verify the correct size.
Task-number: QTBUG-48525
Change-Id: I4fcb9761b54370b39c0d3e1e0a6d0aa3c0223f40
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of blindly leading each parameter name with a space, check
if the data type name is empty first. This prevents extra spaces
from appearing in QML method signatures, which can be documented
with parameter names only, without data types.
Change-Id: I726f8c29839430186fcae4ac19d00404233395e0
Task-number: QTWEBSITE-691
Reviewed-by: Martin Smith <martin.smith@digia.com>
The maximum value for charsNeeded is 4, so if bytesAvailable is less
than charsNeeded - 1, the it's at most 2. It can't be larger than 2.
Found by Coverity, CID 11000.
Change-Id: I42e7ef1a481840699a8dffff1407ef9221a4fd80
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Make it possible to inspect the output of the configure tests.
Task-number: QTBUG-48525
Change-Id: If93d597679ae1b189dfdaa485852d34cad52593b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
these were necessary to suppress the appending of the qt major version
to the library name when reading .prl files. this has outlived its
usefulness, as the .prl files now contain the full library name.
additionally, the overrides would break the use of qt if the .prl files
were not shipped, as zero lost its special meaning as "none".
Change-Id: I9f028c17fc0428cb546a4a26ee209febff32da5e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
as a side effect, this makes the extensions used for searching libraries
configurable under windows (QMAKE_LIB_EXTENSIONS).
Change-Id: I3e64304fcadbfe74d601b50a70a73180c894503e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first, store the library's full name in the .prl file, like we do on
unix. this is not expected to have any side effects, as QMAKE_PRL_TARGET
was entirely unused under windows so far.
then, rewrite the mingw library handling: instead of letting the linker
resolve the actual libraries, do it ourselves like we do for msvc. we
could not do that before due to the partial file names in the .prl
files: if the library didn't exist at qmake execution time, we'd have to
guess the file extension (the msvc generators never had that problem, as
they know about only one possible extension for libraries anyway).
make use of processPrlFile()'s ability to replace the reference to
the .prl file with the actual library. that way we don't need to
re-assemble the file name from pieces, which was fragile and
inefficient.
QMAKE_*_VERSION_OVERRIDE does not affect libraries coming with .prl
files any more. additionally, it is now used literally (not
numerically), and values less or equal to zero lost their special
meaning as "none" - this isn't a problem, because that's the default
anyway, and there is no need to override bogus versions from .prl files
any more.
no changelog for that, as i found no public traces of that feature
outside qtbase.
[ChangeLog][qmake][Windows] Libraries coming with .prl files can now
have non-standard file extensions and a major version of zero.
[ChangeLog][qmake][Windows][Important Behavior Changes] The .prl files
written by earlier versions of Qt cannot be used any more. This will
affect you if you depend on 3rd party libraries which come with .prl
files. Patch up QMAKE_PRL_TARGET to contain the complete file name of
the library, and replace any /LIBPATH: in QMAKE_PRL_LIBS with -L.
(the part about /LIBPATH: actually refers to the next commit.)
Change-Id: I07399341bff0609cb6db9660cbc62b141fb2ad96
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't look up the files and normalize the paths multiple times, as this
is inefficient and hard to understand.
on the way, processPrlFile() got unnested, and libExists() got nuked.
note that a missing QMAKE_PRL_TARGET will be now complained about, which
really should never happen.
Change-Id: Ibcd77a7f963204c013548496ecd2d635e1a4baba
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't prepend the normalized path to the target name, but replace only
the filename in the original string. this ensures that any variables in
the path are preserved.
Change-Id: I58c2b54b7114bfdbf659e6a6ce3e02c2611900d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the dependency doesn't seem to make any sense.
while the deduplication is a bit naive and thus dangerous, it was
already enabled by default anyway by virtue of link_prl being enabled by
default, so this amounts to a non-change for by far most projects.
use no_lflags_merge to disable it.
Change-Id: Ia441931ddbc41ed617aee21e6fe8821e3448d2bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
seems pointless to tear apart the functions, on the way duplicating some
boilerplate.
Change-Id: Ide3697ca1c931e8de607ac48c21cecce4781fe13
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
A \target whose purpose is to link to the top of a
page (and not to a section within a page) works better
as a \keyword, because \target generates a
new html anchor which, in this case, is not tied to
any title element on the page.
A \keyword links to the page itself, as expected.
Task-number: QTBUG-48482
Change-Id: I957551edd0eb7e665358d04b37dab41e2686b851
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
QDoc needs to write the following attributes to index files:
For qmlclass: qml-module-name, qml-base-type
For qmlmodule: qml-module-name, qml-module-version
Because of a regression introduced in Qt 5.5, no QML module name
or base type information were written for QML types, resulting in
linking issues.
Change-Id: I69e616dadfc9ede389bc05e16acb831f1e15bac5
Task-number: QTBUG-48479
Reviewed-by: Martin Smith <martin.smith@digia.com>
QDoc never called resolveNamespaces() unless running in single-exec
mode.
This commit fixes that, and causes public namespaces documented in
other modules to be treated as 'seen', i.e, as if they were
declared locally.
Change-Id: Id1dda7aaea6c9bd38bbeb5992121575a1876cbf7
Task-number: QTBUG-48523
Reviewed-by: Martin Smith <martin.smith@digia.com>
The error return has been observed to vary.
Task-number: QTBUG-48566
Change-Id: Iecfe7819898a6a8a482c1b2251543193ecfa4841
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Include errno.h for errno and EEXIST.
Change-Id: Id28d5a08097319eb84b1fe9ef20c9be6ebe575fa
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Go back to the pipe-based signal handling. signalfd() introduces more harm than good
and is a regression for applications that install their own signal handlers.
Simplify the somewhat overcomplicated suspend (Ctrl+Z) logic too. There is no need for
requiring a callback. Just enable/disable the keyboard and cursor on suspend and resume
and emit the signals. Backends (like kms) may then perform additional steps, if they
choose to do so.
Task-number: QTBUG-48384
Change-Id: Ifd52de89c59915a2e0be6bf5ebc6f2ff1728eb50
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
This ensures that we pick up the debug version of the Qt libraries in
a debug and release build.
Change-Id: I7fc1ed72a6f01b138608413954d4b9e45b7782a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
[ChangeLog][QtDBus] The QtDBus library now links directly to the
libdbus-1 system library if it was detected at configure time. To force
linking to the library, pass option -dbus-linked to configure; to force
dynamically loading at runtime, use -dbus-runtime.
Task-number: QTBUG-14131
Change-Id: Ie33d1f22f85b465ab0ce166b8f17b8491eae1c21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
