When deploying into some directory structure where CMAKE_INSTALL_LIBDIR
is different from Qt's lib dir, we need to set the RPATH of installed
plugins such that Qt libraries are found.
We do this using CMake's undocumented file(RPATH_SET) command and pray
that this command is safe to use across current and future CMake
versions. For CMake versions < 3.21, we use patchelf, which must be
installed on the host system.
The adjustment of rpaths can be turned on explicitly by setting
QT_DEPLOY_FORCE_ADJUST_RPATHS to ON.
The usage of patchelf can be forced by setting QT_DEPLOY_USE_PATCHELF to
ON regardless of the CMake version.
Change-Id: I62ced496b4c12bf6d46735d2af7ff35130148acb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise we don't properly test whether the deployed executable can run
without adjusting the environment.
We temporarily adjust the test_widgets_app_deployment test and set
CMAKE_INSTALL_LIBDIR to make the test pass. It would now fail on Linux
distros where CMAKE_INSTALL_LIBDIR defaults to "lib64" but Qt is built
with lib dir "lib". The next commit removes this hack.
Change-Id: I63c79ef1ee23ffaeed881337fde6e9d889ecc0fe
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unix systems have got crash loggers in the past 15-20 years, notably
macOS and Linux (abrtd, systemd-coredumpd, etc.). By setting the core
dump limit to zero, those tools should be mostly inhibited from running
and thus not interfere with the parent process' timeouts. Even for
systems without core dump loggers, disabling the writing of a core dump
to the filesystem should also help.
Pick-to: 6.4
Change-Id: I12a088d1ae424825abd3fffd171d112d0671effe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QWindow::requestActivate() is not supported.
We have one tst_selftests binary, and will test it with both xcb and
wayland qpa plugin. A runtime check and skip will have different
restult files, which is not implemented in testlib yet.
Task-number: QTBUG-107578
Pick-to: 6.4 6.2
Change-Id: Idc8cb24c6f42a9f0f4dc9493e3fd1a5803ba7ce0
Reviewed-by: Liang Qi <liang.qi@qt.io>
Allocate the QSplitter on the stack so that it and its child widgets are
cleaned up when the test function finishes.
As a drive-by, replace QString usage with QByteArray to avoid unneeded
conversion from and to latin1, and modernize list construction and for loop.
Pick-to: 6.4 6.2
Change-Id: I2e29961edbab1ec88be356fca6bc100f08894e82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In Qt 6, after changes such as 121fddcf5a,
we go through the QPA layer to close widget windows properly. Closing
and hiding of windows is now done in when we receive and handle the
window system's CloseEvent.
Such an event to a modally blocked window should be blocked, so that
users can't close a modally blocked window. However, if the event is the
result of a call to QWindow::close, then it should not be blocked.
Luckily, we know that the event is the result of such a call, so let
such events through. This restores compatibility with Qt 5, where it was
possible to first open a new dialog, and then close the previous dialog.
Add a test case.
Fixes: QTBUG-107188
Pick-to: 6.4 6.2
Change-Id: Id812c1fc36aa0e1a10dfb8d3a16a11d387289b05
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Just in case the same test is being run in parallel. We do that by
creating a listening TCP server in the test process. This test is
supposed to test the address reusability, so a clean close on a server
that never accepted a connection should not cause reusability issues.
Change-Id: I12a088d1ae424825abd3fffd171ccfb9fc5c09ee
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
To try to figure out why QProcess::waitForReadyRead is returning false
so quickly. Though we know it's going to be "Address in use".
FAIL : tst_QTcpServer::addressReusable(WithoutProxy) 'process.waitForReadyRead(5000)' returned FALSE. (Failed to listen: The bound address is already in use
Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
tcp LISTEN 0 50 127.0.0.1:49199 0.0.0.0:* users:(("crashingServer",pid=40529,fd=4))
)
Pick-to: 6.4 6.2
Change-Id: Ic43a460bfc7c7eb6379405b7a1a064e502b6fef3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This corresponds to Unicode version 15.0.0.
Added the following scripts:
* Kawi
* Nag Mundari
Full support of these scripts requires harfbuzz version 5.2.0,
this version adds support for Unicode 15.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/5.2.0
Fixes: QTBUG-106810
Change-Id: Ib06c526e49b0f01ef9f21123bcf875c6b19f2601
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There were two data8 rows; and no data9, so that was easy to fix.
Change-Id: I8191de142e1a3be57bf1ad97e63d5780f2859fea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two test cases were called "base 2, negative"; one of them use -1 as
value, so s/negative/minus 1/ for it.
Change-Id: Ia5da3952d93976262cc8423d4e75ec19dab9a088
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using simply the pattern didn't work so well when some patters are
used repeatedly, on different haystacks. So include the haystack
in the tag name. Remove one straight up duplicate row.
Change-Id: Ib46364581f23c493e83d75e6d04ab09e4329a3a5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
One "empty" test was base ten, the other left the code to work out the
base. Change the latter's name to reflect that difference.
Change-Id: I4918eb0d293420df315d86e532787950b8f05be8
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The addCommonCborData() helper had two identical rows named simple255.
It only needs one.
Change-Id: Ie934c31f373069788c3ef774fde8956b54814e67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two of the uuidA test cases had an open-brace for the string and no
close; one of them ended with a space (which, apparently, is valid).
Since the data-tag was constructed by formatting the string in a
fixed-width field, padding with spaces, these two cases coincided.
Fortunately the only uuidB test-case had closing as well as opening
braces, so we can just switch the test for "trailing space is not an
error" to use it, instead.
Change-Id: I7068d40145c6b6b3b72777b029282850b1d1ea81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mate Barany <mate.barany@qt.io>
The first "test1 text" test-case related to a file called test1.txt;
but the second related to a file called test2.txt; I suspect a
copy-and-paste with incomplete post-edit. In any case, change the
latter's data tag to reflect the difference.
Change-Id: I8354a3d1bd18715d6717dfd0962aa70faefbee90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was using the same tags twice each, giving no clue to the
difference between the two test-cases for each.
Change-Id: I645b01c0c4008a766e505047cb05cc22640ee129
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
It's not clear why this test repeats each test-case five times, but
give the duplicates distinct names, at least.
Change-Id: I4a098d90c3fe6f61842745c1d5f62047fe13a9b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were simply two copies of the same row-adding code.
Change-Id: I12240dedf2649c314ad32984f4de9d6b9bf280d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Two rows named "hex" were a collision we should avoid.
The two "showpos" rows could be better distinguished.
Change-Id: I43727041eb00e6883ce8b34b346de5e2a63f1a34
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Now I can read it and work out how to rename the duplicated data tag.
Change-Id: I78f2b3f38f955fa6e6a88cb87cfca6e4f755a177
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test-case for 0.0001 with precision 0 has the same expected text
as that for 0.0 with the same precision; which lead to QBA's test of
it getting a duplicated data tag. Add an optTitle for the one that
isn't precise to deduplicate.
Change-Id: I03600e2af43f6d11b53e05e8027924c92ed4db89
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It first added a column, then some rows, then called
prependExtended_data(), which expects to be called first in a data
function and starts by adding the same column. So put that first and
drop the duplicate addition of the column.
Change-Id: Ia5cf86f821608e78f0e4872db2b3167ef81cc59e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Having the same test tag for two rows of a data table makes the report
less useful. We also intend to forbid doing that.
Change-Id: I67ec32514b6550f4f97610a2140f1383d0d85b23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The typeSignature for a type T[] is always "[" + typeSignature<t>, so we
can just implicitly support arrays of any known type. To prevent support
for multi-dimensional arrays, make sure that the underlying type is not
also an array.
By adding a QJniTypes::isArrayType in addition (that is true for any
type with a signature starting with '['), methods like
QJniObject::callMethod could then return a special QJniArray type that
provides array-specific functionality.
As a drive-by, and since all lines need to be touched to add braces,
replace std::is_same<>::value with std::is_same_v.
Change-Id: Iccadf03cfceb8544381a8f635bb54baeddf46c99
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
For some reason it has become extremely flaky.
Blacklist to unblock most patches.
Pick-to: 6.4 6.2
Task-number: QTBUG-107500
Change-Id: I11c3ff5e018981be46c20282fa171bce687596b2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
So we can gather statistics on whether it is still failing
Pick-to: 6.4 6.2
Change-Id: I1f4080f4d96f31ce2b689cda175af3a35563e232
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
None of these users require C++20 constexpr or C++23 noexcept, the
only remaining difference between std::exchange and qExchange.
This leaves a single qExchange() user, in QScopedValueRollback, that
requires the constexpr version, only available from C++20, and thus
remains unported.
Task-number: QTBUG-99313
Change-Id: Iea46f6ed61d6bd8a5b2fd9d9ec4d70c980b443a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Skip tests that depend on programmatic window activation on platforms
where this is not supported, such as Wayland.
- Change tests that don't rely on the window being activated to use
qWaitForWindowExposed() instead.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: Ieb4280343a725a2cbdc46a8ac5c657beeb2e7e57
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
These escapes were documented but not used until the version 15.0.0
of Unicode.
Task-number: QTBUG-106810
Change-Id: If48dcd80acf32989e3f47676ca3d41848a325c0e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
focusProxyAndInputMethods tests focus acquisition and inheritance with
a toplevel widget, acting as a focus proxy for a child.
X11 window managers are set to be bypassed, programmatic focus is set
with QApplicationPrivate::setActiveWindow().
The test is flaky on Linux/XCB, and therefore blacklisted on most
Linuxes.
This patch removes focusProxyAndInputMethods, considering that
- focus proxying is tested in tst_QWidget::focusProxy()
- window activation and focus inheritance are tested in
tst_QWindow::isActive()
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I510fd935399d9ad0b6cd76f1bd5db0811e0702f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When laying out a text and calculating maxWidth, we must _always_ take
into account the accumulated width of spaces (lbh.spaceData.textWidth)
regardless of wrapMode, other text content, spaces position, etc.
Fixes: QTBUG-106947
Change-Id: I2ac9af92ed7dd07c1e040bfcf83949a358d1c9c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After 1d961491d8, palettes are different
if they either have different brush data, or a different private. Two
privates can share data, but still must generate different cache keys.
The cacheKey has so far been composted of the serial number of the Data
struct, and a detach number that is incremented when we detach the
private.
This failed for two reasons:
- the implicit copy constructor of the Data class copied the serial
number, when it should have incremented it. Fix that by member-
initializing the serial number rather than doing it only in the default
constructor. The member initialization is also executed for the copy
constructor.
- the detach_no logic as it was implemented does not guarantee that two
copies of the same palette that share data, but have different resolve
masks (and thus different privates) have different detach_no values.
Use a static serial counter for that number as well.
Amend the test case to verfiy that cache keys, and the elements of the
cache keys, change when they are expected to.
Fixes: QTBUG-106984
Pick-to: 6.2 6.4
Change-Id: I84d7055ce8bfe0d42f1f8e9766f3f1ad610f4ec8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In the presence of QT_CONFIG(opensslv30).
Fixes: QTBUG-107027
Change-Id: I481db3cdf3bbb1aa7127cc5498f0c0217df8c35b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This introduces a way to trace each entry in the glyph index
array to a specific index in the original text passed to
QTextLayout, as well as a convenience function to access
the original string from the QGlyphRun.
The index information is stored in the logClusters array internally
in Qt, but it contains the inverse information: For each
character in the output string, it contains an index into the
glyph array. In order to get the string indexes for each glyph,
which makes a lot more sense in the context of the QGlyphRun
API, we need to do a little search to construct the data.
To avoid adding unnecessary allocations, we make the new APIs
opt-in. If you do not specify anything, you will only get the
glyph indexes and glyph positions as before. However, you
can now specify exactly which parts of the layout to extract
using an optional flags parameter.
This also adds a manual test which can be very handy to
visualize QTextLayouts and how they are split into QGlyphRuns.
Fixes: QTBUG-103932
Change-Id: Ie4288fff338b9482aba0aba29fc7e1e59fa60900
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Given a QTaggedPointer, users may write
taggedPtr = {};
to mean "reset it". This is error-prone: due to overload resolution,
this actually ends up calling QTaggedPointer<T>::operator=(T *),
which changes the pointer but *not* the tag, and not the implicitly
declared QTaggedPointer<T>:operator=(const QTaggedPointer<T> &)
which would reset both pointer and tag.
Given the idiomatic usage of {} is indeed to perform a full reset (cf.
std::exchange(obj, {}), std::take, etc.), work around this by disabling
the operator= overload for pointers in case an initializer list is
passed. In other words, make `={}` fall back to the implicitly
declared overload.
Note, this breaks some usages, such as
taggedPtr = {rawPtr};
but at least we get a compile error for these, and they don't look
common at all.
[ChangeLog][QtCore][QTaggedPointer] The operator assignment
taking a raw pointer has been reimplemented in order to avoid
subtle issues when assigning `{}` to a QTaggedPointer. This will
cause code that assigns a braced-init-list to a QTaggedPointer object
to stop compiling (for instance, `tagPtr = {ptr}` is now ill-formed).
Change-Id: I5e572a9b0f119ddb2df17f1797934933dff2ba7b
Task-number: QTBUG-106070
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QDateTime] The 't' format character in a
toString() template can now be repeated to get alternatives to the
(unparseable) zone abbreviation. Thus 'tt' now gets the zone offset
without colon, [+-]hhmm; 'ttt' gets the same with colon, [+-]hh:mm,
and 'tttt' gets the zone name. Previously, each 't' was replaced by
another copy of the abbreviation.
Task-number: QTBUG-95966
Change-Id: Iccccd11f06fa732ed27c0e5d4e40a3d4b5f79f8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QDateTime] The 't' format used in fromString() can
now be repeated to restrict parsing to particular forms. Thus 'tt' now
matches the [+-]hhmm offset format (no colon), 'ttt' the [+-]hh:mm
offset format (with colon), and 'tttt' matches an actual zone
name. When used singly, 't' still matches anything the parser knows
how to interpret as a zone specifier.
[ChangeLog][QtCore][QLocale] The 't' format in toDateTime() now has
repeated forms, as for QDateTime::fromString().
Task-number: QTBUG-95966
Change-Id: I73753145cb66a56bc25a5c2dd5cb051ba982fa2c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The placeholder text was given its own QPalette color role in Qt 5.12,
but there has been no way to specify it from a Qt style sheet.
Fixes: QTBUG-93009
Change-Id: If58ca844c19c65b7eee14c6d5730a4ba27640c33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was our old, HP-UX machine on Itanium (ran on big-endian mode). We
don't support HP-UX any more; HP will still support the 11i v3 release
until 2025, but I doubt anyone wants to run any new software there. One
hopes that HP has long since fixed the issue, but I doubt it since the
last release is from 2007. Gravlaks probably ran HP-UX 11i v3.
There are a couple other left-overs of ".troll.no" in the repository,
the majority of which are URL manipulation in tst_qurl.cpp and in
tst_qnetworkcookie.cpp, then the certificates for fluke.troll.no (valid
until 2035) and aspiriniks.troll.no (expired in 2009, but we don't need
it for validity).
Change-Id: I810d70e579eb4e2c8e45fffd1719122747d7b85a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Pre-requisite for a fix for qHash. The Qt50String inherits from QString
and becomes ambiguous once it no longer goes through a catch-all
template function because qHash(QString, size_t) has a better match for
the second argument.
Pick-to: 6.2 6.4
Change-Id: I23c7afb1b3aa167d40dc4838e82b7763de015f6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To indicate success of a conversion, the public API has previously only
supported registering member functions of the form To (From::*)(bool *).
When adding custom converters for types that cannot be modified, this is
usually not a possibility.
As an alternative, this patch adds support for std::optional in the
UnaryFunction overload of QMetaType::registerConverter. If the returned
optional has no value, the conversion is considered failed.
Task-number: QTBUG-92902
Change-Id: Ibac52d2cb9b5a2457081b4bebb0def1f03e3c55d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Prior to 5.12, the placeholder text color was hardcoded to be the same
as the text color, but with an alpha of 128, i.e. semi-transparent. In
5.12, it instead got its own ColorRole in QPalette. So behavior
changed (In some cases in 5.12 and later, consistently from Qt 6):
placeholder texts no longer got a "light" (semi-transparent) version
of the css-styled color, but just the default gray/semi-transparent
black. That problem was reported as QTBUG-89815. However, the fix for
that bug did not apply the semi-transparency, but only used the same
color as the text. That caused a confusing visual expression, as
actual and placeholder text would look the same. This commit fixes
that.
The problem was made worse since there is no way to specify the
placeholder text color from css, i.e. to style it independently. A
follow up commit will aim to add that.
Fixes: QTBUG-92199
Task-number: QTBUG-93009
Pick-to: 6.4 6.2 5.15
Change-Id: I9e6698d34eba91cbf65c4da07aa5ac6d9f96a9ed
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
syncqt.pl adds an extra dependency on perl when building Qt. Modern C++
provides the convenient cross-platform way to access a filesystem and
to use regular expressions, so we may replace the perl script with C++
application. The syncqt executable is built at configure time and
installed as QtCore tool. It's running at configure time to deliver the
required header files for IDE to build a consistent code model and at
the build time to keep tracking changes in header files and generate
the missing aliases without reconfiguring. 'syncqt' only parses header
files from a CMake build tree, so the resulting Qt installation only
contains interfacing headers that belong to the platform that Qt is
built for. 'sync.profile' files are not used as the 'source of truth'
for sync qt procedure anymore, all the necessary information is taken
from either CMake files at configure time or from the module header
files while parsing them.
syncqt.pl is still in place since it's required as fallback solution
for a smooth transition to the new syncqt implementation for all qt
repositories.
This patchset only enables the C++ based syncqt for 'qtbase'
repository.
From the performance perspective C++ version works faster then perl
script, also the configure time is reduced significally on subsequent
reconfigurations - up x2 times faster when re-configuring repository,
but it also takes time to compile the tool itself the first time.
Numbers for qtbase:
syncqt.pl syncqt.cpp
initial: 0m16,035s 0m20,413s
reconfig: 0m6,819s 0m3,725s
The syncing procedure can be run separately for each module using
<ModuleName>_sync_headers targets. The 'sync_headers' target can be
used to sync all the modules at once.
Task-number: QTBUG-87480
Task-number: QTBUG-103196
Change-Id: I8c938bcaf88a8713b39bbfd66d9e7ef12b2c3523
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since setScaledClipRect will actually render only the necessary parts,
there may be insignificant differences in rounding/anitaliasing
compared to rendering the whole image first and then clipping.
Hence this autotest case would always fail. But that would not happen
in CI, since it tests qtbase without the qtsvg module, and then the
SVG tests are skipped. (For some reason, one ran into this in wayland
testing and made an exception for that, but obviously this failure has
nothing to do with wayland).
Work around the issue by converting the rendered images to 4 bpc
format, so the differences in the least significant bits get truncated
away.
Fixes: QTBUG-100917
Task-number: QTBUG-81044
Pick-to: 6.4
Change-Id: I1c14e98af22d0ae22a751960b69e692c7a38399b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This improves moc's support for nested inline namespaces, so that code
containing them will not break compilation.
For simplicity, we allow nested inline namespaces even in C++17 mode
(the actual C++ compiler will reject the code anyway, and probably with
a better error message than moc could output).
moc still has no real awareness how inline namespaces work, but that is
a preexisting issue.
Pick-to: 6.4 6.2
Fixes: QTBUG-106920
Change-Id: I7b415a99133575f101bc81d01d4670a5f752917f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 013c346a8d. It was
determined to cause a regression in Qt Quick: QTBUG-106899.
In order to unblock integrations, we need to revert the change. It
can be re-committed later when the problem has been analyzed and
addressed.
Pick-to: 6.2 6.4
Fixes: QTBUG-106899
Task-number: QTBUG-89557
Task-number: QTBUG-104986
Change-Id: I04054587f68ab39fdb038b02fc69ebfa3dc7d197
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The new function has an advantage of not requring EM_JS.
Change-Id: Ib9ad0e6b59cfe2e6864697a14b5cfdb39f62af2d
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Before searching, foldCase the first up to 256 characters, and use this
buffer to compare against the haystack. If the needle is larger than the
buffer, compare the rest of the needle against the rest of the haystack
for every potential match. The buffer is placed on the stack and must be
refolded for each search, but this change does not break the API.
This is faster than the old implementation, except if the needle is long
and it is found near the beginning of the haystack, or if the needle is
long and it is not found in a short haystack where few comparisons are
done and hence few case foldings were needed in the old implementation.
Benchmarking using tst_bench_qstringtokenizer tokenize_qstring_qstring
shows an improvement for the the total testcase and usually for each
individual test.
Fixes: QTBUG-100239
Change-Id: Ie61342eb5c19f32de3c1ba0a51dbb0db503bdf3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Inserting the same key repeatedly with QMultiHash will not
test rehashing behavior because in Qt6 those entries all
end up in a linked list.
Pick-to: 6.4
Change-Id: I78c45eed0f35a13af6d6da75d7189a6933750f13
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It seems all the others have had this treatment, but one got missed or
added while the others were being fixed.
Change-Id: If47e2c6bf939b7a55f2c38b029c1df3a901e8bfc
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
And don't decompress the data
Pick-to: 6.4
Fixes: QTBUG-106689
Change-Id: I93a96be8178e24ff0b0bb8647276828161445cf5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The QTRY_* macros and QTestEventLoop exit early if the test has
resolved; however, in the cleanup phase of a test, even if the test
has failed, these loops should continue as normal.
[ChangeLog][QtTest] During the cleanup() phase of a test, the QTRY_*
macros and QTestEventLoop now ignore the test resolution, in contrast
to when they are used from the test itself, which (since 6.3.0) exits
the loops early if the test has failed.
Pick-to: 6.4 6.3
Fixes: QTBUG-104441
Change-Id: I2673161967cbbc57815155af698a9338ab98a686
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The regex used a greedy .+ to match an actual dot and a space,
preceding an open parenthesis, with the result that if the message
contained any parentheses that .+ swallowed everything up to the last
of them. Correct the regex so that recently-added tests' error
messages show up correctly.
Change-Id: I6e52c9b2a6e7959335fcddbb4266f65b589eba68
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The recently added test for QTestEventLoop produced a message which
the TAP test-logger mis-parses. Since that message shall soon go away
(when I fix the bug the new test exists to verify), modify one of
cmptest's QVERIFY2() messages to trip up the same bug, so we can spot
any regressions on this in future (after the imminent fix to this TAP
issue).
Change-Id: Ibbe9931c01c75df529c9571e2bbdbd34010dd9ec
Reviewed-by: Jason McDonald <macadder1@gmail.com>
QDockWidgetLayoutState::itemRect() has been used to calculate a dock
widget's size when unplugging from the main window. This method is meant
to calculate the size of the rubber band, showing the dock widget's
dock area.
The rubber band is by QDockAreaLayout::sep wider (top or bottom dock)
or higher (left or right dock) than the respective dock widget. This is
to make sure the rubber band is never fully covered by the dock widget.
By wrongly using itemRect() also for the dock widget's size after
unplugging, the dock widget grows in size each time it is unplugged.
This patch passes an invalid QRect to QDockWidgetPrivate::unplug(), in
order to prevent resizing.
tst_QDockWidget::unplugAndResize() is extended to check size
consistency after unplugging (corrected for frame margins).
Fixes: QTBUG-106531
Pick-to: 6.4 6.2
Change-Id: I1cf9f695691b0e165a5cb2881781602426e5d587
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Amends 2d0c31e7d9. We were using
MetaTypeDecay in qTryMetaTypeInterfaceForType; but that is not used by
moc when complete types are enforced. Change qt_metaTypeArray to also
use qTryMetaTypeInterfaceForType, so that the code path for "force
complete types"[0] and the normal one do not diverge.
[0] Most easily enabled by using one of the QML type registration
macros.
Fixes: QTBUG-106672
Pick-to: 6.4 6.4.0
Change-Id: I9bf14873d1d0c4127a676643f7e8eb77f6e42dc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
To support cancellation of continuations attached via the parent future,
for each future returned by a continuation we store a pointer to its
parent (i.e. future the continuation is attached to). Later, before
executing a continuation, we go through chain of parents and check if
any of them is cancelled. However, if one of the parents is destroyed
while the chain is executing, the next continuations' parent pointers
will become invalid. So storing the parent pointers isn't safe.
This commit changes the logic of handling the cancelled continuation
chain in the following way:
- Instead of storing a parent pointer in the continuation future's data,
we do the opposite: we store a pointer to continuation's future in the
parent.
- When a future is cancelled, we mark all continuation futures in the
chain with a flag indicating that the chain is cancelled.
- To guarantee that the pointers to continuation future's data don't
become invalid, we clean the continuation (that stores a copy of its
future's data and keeps it alive) only when the associated promise
is destructed, instead of cleaning it after the continuation is run.
Fixes: QTBUG-105182
Fixes: QTBUG-106083
Pick-to: 6.2 6.3 6.4
Change-Id: I48afa98152672c0fc737112be4ca3b1b42f6ed30
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When laying out, we need to increase layout's maximum width _only_
if the previous line was not explicitly wrapped by a line or paragraph
separator, or if the current line's width is greater than the
previously accumulated layout's maximum width.
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Pick-to: 6.2 6.4
Change-Id: Ib7cc4b9dda8f20166dcbd5cfd3b56424bb33d14a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
There are some issues when testing QGraphicsView on GNOME(xorg)
overlapping with the default top bar. This change only move
the view a bit.
Notes:
* There is no CentOS in CI any more.
* panelPropagation() and panelStacksBehindParent() failed in CI
and local vm on Ubuntu 20.04, but only in CI on Ubuntu 22.04.
For example, we can turn the top bar off:
In Extension Manager, install Just Perfection, and disable Panel
in Visibility in it, all tests will pass too.
Task-number: QTBUG-84258
Task-number: QTBUG-103054
Pick-to: 6.4 6.2
Change-Id: I05c262540c85af00182cd142760c4a29554b04c9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The composition implementation may act unexpectedly on Inf or NaN input
values. This change avoid those values, without changing the current
implementation.
Pick-to: 6.4
Fixes: QTBUG-101236
Change-Id: I8e4ee67f53093b7f81e014b28d8a028ba2ddcc47
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
On Unix, we have the fchmod(2) system call that changes the permissions
of an open file descriptor. This commit adds a test for that, by not
closing the QFile before setPermissions().
Pick-to: 6.4
Change-Id: If5d5ef6220874ae8858efffd171255b9f20ed501
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In theory, if we succeed, the permissions should be what we set, but
let's not make that assumption. And if we failed, it might be because
the file disappeared or something else, so re-stat()ing the file is a
good idea.
Pick-to: 6.4
Fixes: QTBUG-7211
Change-Id: If5d5ef6220874ae8858efffd171255506b7bbee0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
__has_include(<chrono>) is always true, because C++11 chrono include
is required since 6.0.
Pick-to: 6.4 6.3 6.2
Change-Id: I50cb92571bf4f1f86e2f3f2b5f486dd3c3f30f4a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove the platform-specific code.
fenv is available since c++11.
Change-Id: Ia5540be93b54117d4b5e9c7579100039c151dcc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this change, qt_deploy_runtime_dependencies supported Windows and
macOS only. We add a generic deployment method implemented in
cmake-language with file(GET_RUNTIME_DEPENDENCIES). This deployment
method is now enabled for shared builds on Linux.
The file(GRD) command requires that the EXECUTABLE argument points to
the executable in the build directory.
Only libraries in Qt's installation directory are considered for
deployment. This includes Qt's own libraries and also things like
libicu*.so we're shipping with the installer.
Unlike macdeployqt and windeployqt, the generic
qt_deploy_runtime_dependencies does not yet support deploying
translations. We will catch up on this in a later commit.
Change-Id: Iea23abcdba774d4c1885c8d2c243eb3e48fb7fae
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These tested results are all wrong and caused by internal overflows.
Note the behavior can not be fixed either as it involves moving an
already maximized QRect, which can not be done without overflow.
Change-Id: If35db68102889012c56eb149fe49bc48954d3422
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: hjk <hjk@qt.io>
Some errors, such as 404, may still present useful data. As opposed to
errors such as 'RemoteDisconnected'. So, just keep the data around until
the reply is deleted.
Pick-to: 6.4
Fixes: QTBUG-106573
Change-Id: I6c86b5a55a45f837ea9b42559d88cd3e0ac2fa5c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Synthetic mouse events are not reliable, as the platform might restrict
synthetic mouse moves. In addition, the WM might automatically activate
the window when the other window is hidden, which makes the EXPECT_FAIL
flakey.
Since the test was not written to test window activation, let's just
explicitly activate the window.
Fixes: QTBUG-23699
Pick-to: 6.4
Change-Id: I0ac1d3bc0658dfbd600a1f5d960839860be6dd2c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Its debug member can be set where it's declared, making the
constructor redundant.
Change-Id: Ic1195108766a6a86c3392a5bcf7f197ea31e8068
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Refactor QWinRegistryKey to make it more modern and more
usable from outside.
Adjust the test for QWinRegistryKey to test the new functions,
merged with the original test.
Will port raw registry accessing code in QtBase to use this
class in follow-up commits. This change is the first step.
The long term goal is to port QSettings registry code to
this class instead of using raw Win32 APIs, however, there's
much more registry code in QSettings and migrate them to this
class needs a large refactor, so jsut leave it for now. Will
fix it in some future commit.
Change-Id: Iada2adb41b4d58e1b658ff6870a4b31ace479d43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For some reason when running this test on macOS 13 in the CI the window
is activated, as on other platforms, but this is not reproducible
locally, so we can't just remove the QEXPECT_FAIL.
Task-number: QTBUG-104210
Task-number: QTBUG-23699
Change-Id: Ib1cacb36d90d2be357756c82af2427f2b3ab9999
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This provides an easy way to test window modality using a ready
available test.
Change-Id: Ia23736c61fd56dda8f72ae19f5f102163951271b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For some reason it fails on Ubuntu 22.04, but it's anyway
not following the trend the rest of the file uses, so just
assume it's the code at fault and fix it.
Thanks to Liang Qi for debugging this!
Pick-to: 6.4
Fixes: QTBUG-106016
Change-Id: I9d0563a081827eaa037d61643f0ea46301e11493
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Expand a test to cover millsecond format variants more thoroughly,
including a test for the new usage of zz. This applies to parsing the
complement to commit 0a36a7c1db173089c25ea09029505a589a1c59e5's change
to serialization. Fixed minor glitch in the serialization's doc, too.
[ChangeLog][QtCore][QDateTime] When parsing a datetime, the 'zz'
format specifier is now equivalent to 'z', as for serialization.
Change-Id: I1c5700064738d9c92d5e8ce10bff8050131e190f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the standard mechanism instead of a hand-rolled way of identifying
function/data-tag combinations. Adds missing data relevant to
identifying test cases, some of which previously had apparently the
same name, with no hint at why the test-case was seemingly run
repeatedly.
Change-Id: I6225c6d1990069c94a1f1c8dbb179993b96076e7
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This can be helpful when you calculate multiple hashes, store them in a
vector and you want to know which result belongs to which algorithm.
[ChangeLog][QtCore][QCryptographicHash] Added getter algorithm().
Change-Id: Ifcf78536f215619a6e2e3035a95598327d0ed733
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This adds a move constructor, a move assignment operator and a swap
function to QCryptographicHash. This can (to name one example) be useful
when you want to store multiple hashes in a vector.
[ChangeLog][QtCore][QCryptographicHash] Added move constructor, move
assignment operator and swap() function.
Change-Id: Id54594fa69104ec25ad78581f962a021e85531c2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The method should by contract return nullptr when the stack is empty,
but it crashes in this case.
Also, unit-test the case.
Pick-to: 6.4
Change-Id: If64b71e761efd9a5cd5af407cd68cba7f8dbc8e2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If we receive compressed data we will decompress it as it comes in,
in some cases the final byte we receive doesn't actually contribute
to the final output. If this byte is handled by itself then, when
combined with QNetworkReply's signal compression, we ended up not
emitting the readyRead signal for any of the data we received while
compressing the signals.
So, instead of relying on checking difference in bytes downloaded
for each batch of data received we keep track of how much data
we had received the last time we emitted readyRead.
Pick-to: 6.3 6.4 6.4.0
Fixes: QTBUG-106354
Change-Id: I4777be29b46bf0de968667e9de9d975c735ac6e6
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Because it's convenient to have it build automatically.
Pick-to: 6.2 6.3 6.4
Change-Id: Iecd5bd1f9fe518f683b8ee9eb6529e48ce76fb33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some tests in corelib/kernel need threading support, but they are not
guarded against compilation if Qt is built without threading.
Such tests have been disabled in this case.
Change-Id: I2f5dc9582f2a59b6af2a9e56638b045dca06193d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Test was not really good to start with - it was assuming the presence of
particular ciphersuites. Furthermore, it was ignoring the fact that
TLS 1.2 and TLS 1.3 set ciphersuites differently in OpenSSL.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I6c8ba20154cdeb9275878462ab945729d6c82ecc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The collection of translations available to us need not have anything
to do with whether CLDR has matching data, so preserve the system UI
language list's entries as they are, rather than forcing them through
the QLocale constructor's exercise of likely sub-tag rules.
Instead, simply parse the given locale tags to QLocaleId instances and
use these in the likely-subtag processing to determine what other
entries to add to the list in addition to those supplied by the
operating system. Since going via QLocale did usually supply a
territory, that was included in the BCP 47 name, it's now possible for
the given entry to lack the language_territory name, so be sure to add
that if missing.
This incidentally reduces heap traffic and saves a fair deal of hidden
likely-subtag processing in calls to the constructor and bcp47Name().
Expand testing of QLocale::uiLanguages(), both plain and system. In
the process, cross-link the two closely-related tests, move a comment
on one's _data() to the other's, where it really belongs, and add
reporting of the actual lists on failure. Enable MySystemLocale to
remember the requested locale's ID, before likely sub-tag processing,
so that we can make query() report results for language, script and
territory as requested, to ensure the fake system locale really does
match what was requested. The new german-britain test failed without
it, because there is no de-GB locale in CLDR.
Task-number: QTBUG-99531
Change-Id: Ide041577772c442a4413e3b9a590e11140c48f49
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Have QSystemLocale manage a stack, so that tests can install an
over-ride for the actual system-specific one reliably and restore the
system-specific one when finished. Leave the QSystemLocaleSingleton
out of the stack, all the same. In the process, mark the QDoc comments
for QSystemLocale all as \internal, since this is not public API.
Change-Id: I8faed49780215e42f32be10cf936c32bb46105bf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When the system locale is en_DE, macOS seems to think we should use
en_GB as the right translation. While that probably is a sensible
choice in the absence of an en_DE translation, we should definitely
use the en_DE translation if available, especially if en_GB isn't
available (which lead to a fall-back to de_DE, given later entries in
macOS's list). So prepend the system locale's own pcp47Name() if it
(isn't the C locale and) is missing from what we would otherwise have
used for uiLanguages(), after likely sub-tag perturbations.
Add a test simulating (some approximation to) what macOS was doing
that would have caught this case; and add a scope-guard reporter to
the test to report what shows up when lists don't match.
Fixes: QTBUG-104930
Pick-to: 6.4 6.4.0 6.3 6.2 5.15
Change-Id: I116234708067e1717d9157aebc84da76e04a9f38
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Certain masks are not supported outside 32-bit x86, and will assert on
x64.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-106000
Change-Id: Ic9f58e5a19c1db3309edeb5ec529e7a78c929665
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We only want to enable writing BOM if we have _not_ started
writing.
Fixes: QTBUG-106279
Pick-to: 6.2 6.3.2 6.4 6.4.0
Change-Id: Ibcbc101b931615fddb2507f01307bf9619772d7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace the deprecated operator*() calls with various
overloads of QMatrix4x4::map()
Add a separate test for deprecated API and guard it with
QT_DEPRECATED_SINCE checks.
Task-number: QTBUG-104858
Change-Id: Ief2e03198696382dc626f01b209614fe320e70b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
qdbusxml2cpp has a -m/--moc option. Change and modify the behavior
such that
-p foo -m includes moc_foo.cpp in the generated .cpp
-p :foo.cpp includes moc_foo.cpp in the generated .cpp
-p foo.h:foo.cpp includes moc_foo.cpp in the generated .cpp
Change the Qt6DbusMacros.cmake file accordingly.
[ChangeLog][qdbusxml2cpp] The -m/--moc option now generates
idiomatic moc file names (moc_base.cpp for headers, base.moc
for implementation files)(was: always base.moc). Build systems
using workarounds for the non-idiomatic naming of moc files
used by qdbusxml2cpp in the past can now drop these workarounds
for Qt versions >= 6.5.
Fixes: QTBUG-103313
Change-Id: I754b1b276f130cb8645166470e1b457a676590f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
OpenSSL 3 by default disables TLS < 1.2 in the conf files. We're not
going to work against that, so we bump the version of TLS used.
Keep the client-side TLS 1.0 Or Later just to keep testing that this
part works.
Task-number: QTBUG-95123
Task-number: QTBUG-106018
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Ia6cb10495875de232d69a886832ae74c5f5ac15f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When TopMargin is set in TextBlock and the mouse click position is
between Margin (the mouse is not on the textrect), the cursor will
usually jump to the end. So topMargin should be considered when
hitTest() calculates coordinates.
Fixes: QTBUG-91774
Pick-to: 6.4 6.3 6.2
Change-Id: I231377263855b9cd7152684203fc4ed2e9299bb9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tang Haixiang <tanghaixiang@uniontech.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On Wayland there is a special case when decorations are enabled,
where we post an initial update request to ensure widgets are
redrawn after the buffer is recreated (see
af7b60ade5c4be81cbc58eb18307c017d5594071 in qtwayland). To
make sure the test behaves the same on Wayland as on other
platforms, we disable client-side decorations when running
these tests.
The flag is primarily required for the requestUpdate() test
at the moment, but it is only queried once per application
run, so it has to be set before any tests are run.
Pick-to: 6.4
Fixes: QTBUG-100889
Change-Id: Ica6d744083ecae4a3722b6d04b956e7615f0dfe5
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The initial problem was in server not starting encryption, because
its certificate was rejected by OpenSSL (v3) saying 'weak md'.
After the certificate was replaced, we got another problem - due
to the fixed TLS v.1 protocol for both client and server - handshake
is interrupted early with 'tls v1 alert' and error message
saying about not found signature algorithms. Don't fix the protocol
version, use proper QSsl::SecureProtocols (default).
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I0f22f5304f4405933ad511195bc61c640518e7d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The certificate was using SHA-1 for signing its certificate, which is
considered 'not good enough' by some TLS libraries.
Regenerate it with SHA-512 and a larger RSA key.
Also include the files needed to generate it.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I535e047d540e663c8cec334695196044173949fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Batching the tests leads to one of the tests tst_qmetaobject and
tst_qmetaobject_compat not being registered in the batch. Attempts to
batch those together fail as batch test name is defined per-source,
which, in this rare case, is the same across the two targets.
Change-Id: I356931feabc004c39ba0b6863b5f64e06d739a58
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
OpenSSL v3 by default sets SECLEVEL = 2 unless overridden in conf files.
SECLEVEL >= 1 means TLS <= 1.1 is disabled. Remove cases that were
previously expected to work. Arguably, we should not test deprecated
protocols at all, but the cases expecting a failure still work
and logically correct.
Task-number: QTBUG-95123
Task-number: QTBUG-106018
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Ifa59fa902b433338dbed7abf086cfdef9470384c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was an old test written in a very low-level way, which perhaps is ok
to be independent of testlib in a few tests; OTOH, it was blacklisted
on a couple of platforms. Perhaps doing touch events the standard way
could be more stable.
While we're at it:
- verify that the touch events are accepted, and thus verify the new
bool return value from commit()
- implement paintEvent() to help understand the layout, and touchpoint
locations
- remove repeated QCOMPARE lines
- skip the test if window positioning fails
- try to un-blacklist it, on the assumption that window positioning
failure was the reason
Task-number: QTBUG-87025
Task-number: QTBUG-104656
Pick-to: 6.4
Change-Id: Ie22eb24abf95cd849990a56212be87d06ce8e574
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
[ChangeLog][QtCore][Meta Object] QMetaMethod::invoke(),
QMetaObject::invokeMethod(), and QMetaObject::newInstance() are no
longer limited to 10 arguments.
[ChangeLog][QtCore][Meta Object] The use of the Q_ARG macro is no longer
necessary when using QMetaMethod::invoke(), QMetaObject::invokeMethod(),
and QMetaObject::newInstance(). Types may now be passed
directly. Similarly, Q_RETURN_ARG can be replaced by the free function
qReturnArg().
[ChangeLog][Potentially Source-Incompatible Changes]
QMetaMethod::invoke(), QMetaObject::invokeMethod(), and
QMetaObject::newInstance() no longer support passing forward-declared
types in the argument list (it was possible to pass them by
const-ref). From Qt 6.5 onwards, all types in the argument list must be
fully defined.
[ChangeLog][Potentially Source-Incompatible Changes] Attempting to use
the internal types QArgument, QReturnArgument, QGenericArgument, or
QGenericReturnArgument directly with QMetaMethod::invoke(),
QMetaObject::invokeMethod() or QMetaObject::newInstance() may fail to
compile. Those are internal types that were never meant to be used
directly and will be removed in Qt 7. If really necessary, ensure all
arguments passed to those functions are directly using those classes and
not mixed with Q_ARG and Q_RETURN_ARG. Implementations of bindings to
other languages should contact the Qt development mailing list to
discuss options.
Change-Id: I36b24183fbd041179f2ffffd1701e3e8e47e0fba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The doc of QMetaEnum::valueToKey() says to use ::valueToKeys() instead
for flag types.
Pick-to: 6.4
Change-Id: I48e5ba47324137f2ce2710f1d876e93e7c562e9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This includes QDBusReply, QProperty, and QStringBuilder expressions.
The new constructor subsumes the QStringBuilder case without requiring
jumping though hoops to delay the definition of the ctor the way we
had to for the explicit QStringBuilder constructor, so remove the
explicit QStringBuilder one again.
[ChangeLog][QtCore][QAnyStringView] Can now be constructed from
anything that implicitly converts to either QString or QByteArray.
Fixes: QTBUG-105389
Change-Id: I0e584dd3e20d591381609a3329ef47cec7356ecc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Since qVersion() might be called also from C code, disable the parts of
qlibraryinfo.h that are relevant only for C++ code if __cplusplus is not
defined.
[ChangeLog][Potentially Source-Incompatible Changes] qVersion() is
moved from qglobal.h to qlibraryinfo.h, '#include <QtCore/QLibraryInfo>'
needs to be added where it's used.
Task-number: QTBUG-99313
Change-Id: I3363ef3fa4073114e5151cb3a2a1e8282ad42a4d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And include qcore_mac_p.h where needed.
Task-number: QTBUG-99313
Change-Id: Idb1b005f1b5938e8cf329ae06ffaf0d249874db2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we had code to default to zstd as the default algorithm instead of
"Best", we ended up not compressing anything.
[ChangeLog][rcc] Fixed a bug that caused rcc not to compress files with
any compression algorithm if the --no-zstd option was present.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-106012
Change-Id: Ic6547f8247454b47baa8fffd170fddae429f82d2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
With OpenSSL 3.0.5 we see X509_print giving us the text representation
not matching any of previous ones - mostly a question of spaces
and formatting. Let's add a proper version to compare against and
remove useless 0.9.8, 1.0.0, 1.0.1, - we don't support them anymore
and thus QSslCertificate::toText() will never give a match.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106017
Change-Id: Ida11321c23e74c7313acc682237ab78408cf2803
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
leaf.p12 is using RC2 for encryption and it's disabled by default
in openssl v3.
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-106017
Change-Id: I4edd0d29506d1e50b2b618b6a00cceeb4b156204
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test expects the helper libraries to contain the .dylib suffix
rather than .so.
Replace glob copying of the libraries (which depends on the underlying
shell) with manual copy calls.
This also ensures the libraries don't contain a _debug postfix in the
file name even in a debug build, which would break the tests.
Amends f8c1909320
Amends 1dff26dd95
Change-Id: I20361c33c4a1b9dd4b5273fcdb8cc79c9f266327
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
