the code had a dead variable assignment and no side effects.
Change-Id: I9add8f1776f23a29c103b46dc725b9f386a4495a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it appears to have been some weird attempt at back-mapping file names to
-l arguments, which has been made ineffective with the partial #if 0.
i can't even describe what it did at this point.
Change-Id: Ie31cbbe7fab8b21b039bfff5877397af07731f1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in retrospect, we were too conservative in 925fd32a2d making the
"feature" optional - it simply makes no sense to have qmake
automatically find the highest major (!) version of a library based on
a loosely defined platform-specific convention (not standard, unlike
ELF's .so versioning) with side effects.
Change-Id: Iba92df433b199a9fbff88358f6e0f6835f2e813d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the assumption is that if somebody bothers to actually specify a file
name, they'll most probably go all the way to specify the *correct* file
name. otherwise, they'll use -L/-l flags to specify the libs in a
cross-platform way and rely on qmake's magic.
this code was initially added for the purpose of invoking
findHighestVersion() under windows. this has been off by default for a
while now.
at some point, the code did also swap qt for qt-mt and vice versa if the
specified one was missing. this is obviously gone for a while as well.
the unix code was pretty much broken since day one: there was a regex
match on lib<stub>.* against <stub> itself, which obviously could not
have ever succeeded. consequently, the subsequent code ran into a path
that tried the file name with a trailing dot (instead of a new
extension), which never produced anything meaningful.
[ChangeLog][qmake][Important Behavior Changes] The library lookup has
been simplified. It may be necessary to be more explicit in some edge
cases now.
Change-Id: I5804943f1f7a16d38932b31675caabbda33eada7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would cause the unix generator to set TARGET_EXT, but that wasn't
used anywhere. so remove the dead code. if it ever gets re-introduced,
it will be as QMAKE_EXTENSION_EXE.
Change-Id: I44ce3e612651fd229177e37ab6c8879cd8c474b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it was used only once, and virtual for no reason whatsoever.
Change-Id: I99411be3dac93d8a129441f656b2443d09108564
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
rvct and armcc support are remnants from symbian, while the ti linker
support was never completed in the first place.
Change-Id: I5c9d7f0ce67de24c348cbee4af618a499fe06f16
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason to expect the various list elements to be
space-encumbered, or to tolerate it if they were.
Change-Id: I1a2e5c8d30456b640408503334c55f9262792db5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there should be no flags other than /LIBPATH: in LIBS (and the variables
that end up in it) - these belong into QMAKE_LFLAGS.
while not very important, this change enables the use of drive-relative
paths using unix path separators.
note that on unix, arbitrary flags must be supported in LIBS due to GNU
ld's --push-state and related position-dependent flags (-whole-archive
in particular). luckily, on unix, flags start with a dash, not a slash.
Started-by: Dyami Caliri <dyami@dragonframe.com>
Change-Id: Ie5764f14d34ad13020ca010499594eed8c69a4a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On OS X with a framework-based build of Qt, the 'Libs:' line of the
.pc files generated by `qmake` references the framework. This requires
two separate arguments to the linker: The fixed string '-framework' and
the name of the framework (e.g. 'QtCore'). Only the latter might need
quoting. Prior to this fix, they were treated as a single argument (e.g.
'-framework QtCore'), thus always quoted because of the contained space,
and later lead to errors when trying to link a Qt framework discovered
via `pkg-config`.
Change-Id: I5c11ee651048832007e2ee4ebcbcf2e3212c8f48
Task-number: QTBUG-47162
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Consider a debug_and_release build of a static library.
Set DESTDIR to different values for debug/release.
Let TARGET be the same for debug/release.
Now qmake would generate code in Unix Makefiles like this:
rm mylib.a
ar mylib.a ...objects...
rm debug/mylib.a
mv mylib.a debug/mylib.a
and for release analogous. This clashes when building in parallel.
This patch resolves this conflict by reducing the commands to:
rm debug/mylib.a
ar debug/mylib.a ...objects...
We believe that every ar implementation that's in use for Qt
is able to operate on files in subdirectories.
[ChangeLog][Important Behavior Changes][qmake][Unix] QMAKE_POST_LINK
steps of static libraries are now required to operate on $(TARGET) in
$(DESTDIR) instead of $$OUT_PWD. This matches the Windows backends.
Task-number: QTBUG-48287
Change-Id: I192f488ed74c56bc32862426d9e9d4237d9b8135
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Set defaults before parsing compiler options.
UsePrecompiledHeader, CompileAsWinRT and GenerateWindowsMetadata
options were overwritten after parsing the options.
Task-number: QTBUG-46978
Change-Id: I8c4e423cd13f575fa679b114108b693937908549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
$ORIGIN (or $LIB) needs to be escaped to survive the trip through
make and the shell.
this shouldn't break anything, as there was simply no way to get it
right so far.
Change-Id: I86337c5994d10dae2e80dd2f858f74874b14bca7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
While generating Visual Studio 2015 solution files for a project using
the subdirs template qmake writes out both the header for version 2015
and version 2013. The problem is a case fall-through.
Task-number: QTBUG-48110
Change-Id: Ib6ddc1ceb306be9b3098d7b7c66a8ffabbd86481
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Valid characters are (A-Z,a-z,0-9,-,.).
It is unlikely that we will see anything more exotic
than '_' in bundle/library names, go ahead and replace
that character only.
Task-number: QTBUG-46824
Change-Id: Ia97b7cd6247f40a970b4919363ffb66fb347186c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
unlike everywhere else in this file, destdir is not pre-quoted here.
Task-number: QTBUG-47775
Change-Id: Ia5b0c56bbdd3eb095f81b0f615d68a338ffa52c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- ApplicationTypeRevision has been updated to 10.0 in the final VS2015
release
- For Universal App project one needs to specify
WindowsTargetPlatformVersion and WindowsTargetPlatformMinVersion
- Disable adding Qt libraries to the DeploymentFiles variable for
Universal Apps. Before an error occurred during build as windeployqt
asked to package the very same files. However, windeployqt also takes
care of plugins and hence we prefer to rely on windeployqt and disable
the link step parsing.
Change-Id: I5180519cabde60dbc7786ef27a6fbe0ef2ac44f3
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
The SDK Version has been updated, hence include and lib directories were
wrong. Luckily, Microsoft introduced an environment variable in the
final VS2015 release to identify the location. Also has the benefit to
reduce hardcoded paths.
Change-Id: I9726db031d87d119bc7326154b24554c4b685d57
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Instead of going to qmake to generate the makefile that we want, we write
the makefile directly and include it from the generated makefile. This
leaves us with a single top level makefile for handling exclusive builds
through xcodebuild, and covers all the various build configurations in
a unified manner. It also allows for improved test device handling.
Change-Id: I66851f181ac4da2c8938645e0aa95ffa0fee33c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
SDKs generated from VS2013 use a different folder for
build settings than those generated from VS2012.
Check both folders, before rejecting a potential
SDK.
Change-Id: I5bee5cc3771352adaab07d39ebbc350618f6c573
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... by marking the ctors (if any) explicit and the
function-call operator const.
Change-Id: Ia65fbad0dfdccbb31d630a5501c4d6f0f5aa3623
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
They are already held in QVector.
Change-Id: Ib1266956c860ecd4671501ab12ab932a8ce9b7d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
Visual Studio 2015 integrates the Windows Runtime development
tools, including the msvc2013 compilers.
This patch fixes the error that mspdb120.dll is missing.
It is typically included through PATH variable of the shell,
which points to the "wrong" location in this case.
Change-Id: I46289721912d6b517c6083612582f67536d28b11
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
When PRECOMPILED_HEADER is set to foo/bar/stable.h and
PRECOMPILED_SOURCE is empty, then a C++ file foo/bar/stable.cpp
is generated that contains the include "stable.h".
We must pass the exact string "stable.h" to the /Yc compile
switch instead of "foo/bar/stable.h".
Commit dc612acdc6 introduced this
regression to allow to have PRECOMPILED_SOURCE in a different
directory than PRECOMPILED_HEADER.
Change-Id: I1a7e096c0455b946a5660d23c70c72abd4c7ac1b
Task-number: QTBUG-46679
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With Xcode7, Apple added support for compiling apps to bit code
instead of binary (*). But this is only supported when the deployment
target is at least 6.0. And in Qt-5.5, the deployment target is
still set to 5.1.1. The result is that every Qt application will fail
building once people move to Xcode7.
Instead of bumping the deployment target (which we plan to do
for Qt-5.6), we choose to switch off bit code for now.
*: https://developer.apple.com/library/prerelease/ios/documentation/IDEs/Conceptual/AppDistributionGuide/AppThinning/AppThinning.html
Change-Id: I23001563439a7726506b7cd2dc77a82533b8a27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Deprecate the qmake variable DEPLOYMENT that was used for installing
files on remote devices for Windows RT and Windows CE Visual Studio
projects. Use INSTALLS for both nmake and Visual Studio projects.
[ChangeLog][core][qmake] Deprecated the qmake variable DEPLOYMENT in
favor of INSTALLS.
Task-number: QTBUG-21854
Change-Id: Ia9d2c69feb7d87b0b9dc69ff7c0a68be35a57acd
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qmake win32 generators by default used values of DEFINES for RC
preprocessor defines, too. For simple defines this works. For
string literals this failed for the .vcxproj files:
DEFINES += "FOO=\"BAR BAR\"" works for CL but fails for RC.
DEFINES += "FOO=\\\"BAR BAR\\\"" works for RC but fails for CL.
This patch introduces the qmake variable RC_DEFINES. The variable
contains the preprocessor defines, that are used for RC. If the
varible is not set, the DEFINES values are used for RC.
Task-number: QTBUG-44184
Change-Id: I4202271759d29de8c1829347ae3ef117eda54b38
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
they are self-contained, as they are the result of another project's
full resolution. consequently, recursing them just burns cycles, and
additionally introduces the risk of an endless loop if the file is
botched.
Task-number: QTBUG-12711
Change-Id: I401ee691c170092cc61fe05538cec4272ed8f922
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we use qmake properties in the installed .prl files, so the paths
need to be converted to native separators before emission.
Task-number: QTBUG-46217
Change-Id: If3fb0a84488795478fc2a701271c931c62eba6aa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This allows creation of applications for
- x86
- x64
- arm
While the arm build theoretically also allows to launch on
a mobile, it currently asserts on runtime. Either we will
create a new mkspec for Windows 10 Mobile in the future,
or do runtime checks for the environment. That also depends
on whether there will be a separate SDK by Microsoft.
Change-Id: I510bfc88410a5b5a1eb7c37f7f43888d1e5dda0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Like application bundles on OSX, the plugin bundle has its Info.plist
in the Contents directory.
Change-Id: I216fa79857924beb0e9c5fcc4a8d06b197a3f383
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
since commit 22edeb3f4 (private; anno 2002), the generator would extract
-prebind and translate it into a PREBINDING property in the pbx file.
the writeout to the pbx file got lost in the rewrite for Xcode 3.2
(commit 66f6e5b1; anno 2012).
this isn't particularly bad, as prebinding is obsolete since OS X 10.3.4.
we now go the last mile and remove the handling of the flag. that means
that remaining projects which still use it (meaninglessly) will get a
warning from Xcode, which is kinda what we want.
QMAKE_LFLAGS should have never been part of the library iteration loop.
it was added there in the prebind handling commit, so we can get rid of
it again now.
Change-Id: Id7dee2b1e248bb2bd7aa7a3e66f82057921afffd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
we need to do full shell quoting, not the limited whitespace quoting.
Task-number: QTBUG-46224
Change-Id: I41bc9aee556ca680dce0875b58159a31db962452
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it obviously makes no sense to set up the loop if the container is empty.
as we now have that conditional anyway ...
Change-Id: I6d95c0102734852443c188012bfcb076d879581e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_FRAMEWORK_VERSION has a fallback to VER_MAJ (which derives from
VERSION), so it's pretty much always set, thus defeating the previous
check.
amends 6cb495de.
Task-number: QTBUG-46215
Change-Id: I2c5560c469617ebeab978e4de78df00baf38d49d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Currently, the Xcode generator uses "sourceTree = <absolute>" for
all PBXFileReferences. But the paths we use for referencing
libraries are relative. This patch will change this, so that we
always use absolute paths to be consequent.
This will fix a crash in Xcode that happens when opening
projects generated by Qt.
Change-Id: I3a372b93598a777c96ba353205cf19710a5923f5
Task-number: QTBUG-45966
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
ProjectBuilderMakefileGenerator::openOutput should only change back
Option::output_dir when creating a pbx file inside an Xcode project.
Since the pbx file will be placed inside a different directory than
output_dir when creating an Xcode project, MakefileGenerator::openOutput()
will redirect output_dir to be inside the Xcode project as well. Since
we don't want this redirection, we change output_dir back to what it
was once the call returns. But we should only do this when creating
the whole Xcode project, since only then we create a pbx file that
is different from output_dir in the first place.
A bug with this is seen when making qt_makeqmake.mak (which is a
helper makefile inside the Xcode project). That file will only
regenerate the pbx file (and not the whole Xcode project), which
means that we don't enter the fileName.isEmpty() section, which
means that output_dir should stay as it is.
Task-number: QTBUG-45826
Change-Id: I03d5c3dec395ff4768f9272fd1981c6fd35efb1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't try to install the primary target, as it obviously doesn't exist.
however, we must not disarm bundle installation.
Change-Id: I3074150f749220d77c1210a4978e71aff9c9a3a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_BUNDLE_DATA itself does as well, and it can refer to versioned
resources.
Change-Id: I3d9bf23c2ff81dbb1cd929f3f0e0ce1e67f3258a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove a superfluous implementation of
VcprojGenerator::replaceExtraCompilerVariables.
The implementation in the base class is exactly the same.
Use that instead.
Change-Id: Ie7d995be1b0d55fbefd15ae6b7a992237d97839c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this affects only files explicitly listed via the .clean member without
placeholders, so more or less a corner case.
Change-Id: I7bd55948130aaee116d1a4bebbad0c445b76197b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it helps enormously to put spaces between target names ...
Task-number: QTBUG-45533
Change-Id: Ic41f8287c6c37761b1be3ad7c383b5c7fb714b12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
people may use extra compilers which refer to CXXFLAGS & co., so set
them up "as normal".
Change-Id: I858ca63370a7aed66e04f5417da078b896feefc4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Evaluate the .output variable of the extra compiler to determine
the file extension of its output.
The VS project generator needs it to determine the filter that
will contain the output file.
Change-Id: Iab1e154a712342401e17421c08975fad13967a5b
Task-number: QTBUG-45717
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
explicitly use the correct directories instead of temporarily changing
into the output dir. this makes the code less obfuscated.
Change-Id: Ia935987f486151ae556910703cc20945c7610ffc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
turns out that a relative path makes some versions of Xcode crash.
so use an absolute path again.
fileFixify() has been fixed for shadow builds to make this possible.
This reverts commit 6ccf0a326e.
Task-number: QTBUG-45424
Change-Id: Ica87c6c29f990f56e42c399b6d9b1c7eacdd13a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
... instead of sheepishly assuming qmake_pwd().
it also canonicalizes consistently with the relative output path now.
Change-Id: I86231f7259179020643405f3c0e696a74031aa4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would trigger only if the input file name was already absolute,
matched the native path separator, and some (likely) other conditions.
as this behavior was almost unpredictable, it would be not very useful.
so save ourselves the headache and just remove it.
Change-Id: Ic457f487f6d0ce9f7a5f192859c9efa9c2de2b63
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Make sure we don't pass by value, but by const reference.
Change-Id: Ia432e881d2b8116f22a30dfa31186479784ee4a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CESDKHandler now retrieves available WEC2013 SDKs from the registry and
assembles a working build environment.
Change-Id: Ifa70f53aca9d1bf2fadf178a331f46c1efca90ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Visual Studio copies all files to be deployed into the MSIL directory
and then invokes MDILXapCompile on it, which checks for managed code and
translates it into native code. The problem is that all entries of the
package will be copied into the MSIL directly, losing the subdirectory
structure (for instance for plugins). Hence we recreate the directory
structure manually by invoking windeployqt a second time.
Task-number: QTBUG-41753
Change-Id: I3d99cbc531bbe883f87b45de37ba71d93472c042
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The msvc_nmake and msvc_vcproj generators deduced the exe/dll header
version number from the VERSION variable in a "bizarre" way:
VERSION=1.2.3.4567 was converted to /VERSION:1.234567.
But a minor number beyond 65535 is not accepted by the linker.
This fix deduces the major and minor from the major and minor of
VERSION: VERSION=1.2.3.4567 leads to /VERSION:1.2.
In addition, a new variable is introduced: VERSION_PE_HEADER.
With this variable, legacy pro files that rely on the bizarre
behavior can re-create it:
VERSION=1.2.3.45 and VERSION_PE_HEADER=1.2345 lead to the old
result: /VERSION:1.2345 by just taking the VERSION_PE_HEADER to
overrule the new behavior.
Task-number: QTBUG-44823
Change-Id: Ie093ade83290c098fe2b2a429ce5d6ed6dc750ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QT_INSTALL_LIBS is not the right place to check for Qt dlls, as they
cannot be found there in a non-developer build. In order to be able
to find the dlls and make adding dll locations easier for the user,
QMAKE_DLLS_PATHS was added. On Windows, the variable points to Qt's
bin directory by default.
Task-number: QTBUG-44960
Change-Id: Ie4e5beeaadee798a055599387e842d7c0502c27a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Files in DISTFILES are placed into a "Distribution Files"
folder under the project node.
Task-number: QTBUG-43162
Change-Id: Ib75aacf1010d9ea63af89d4a9cc92275d714b3cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
17d690952b missed a few instances that should have showEnvVarsInLog = 0.
Change-Id: I8f1106426447670b0057aeb421efc09bf117e969
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
In de5553aa, qmake was fixed to resolve QMAKE_INFO_PLIST based on the
current pwd to fix QTBUG-21267. This fix was lost as part of 8c138054
in 5.4.
This fixes the error:
"WARNING: Could not resolve Info.plist ..."
when using qmake for shadow builds on OS X.
[ChangeLog][qmake][OS X/iOS] Fixed QMAKE_INFO_PLIST path resolution
for shadow builds
Change-Id: Icb42b2b3a44856f9b9a86a008081a3353951640d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MSVC creates .lib file when ever dll with exports is built. Remove
this file too in distclean target.
Task-number: QTBUG-44685
Change-Id: I84ecb57626926b5bce06a200ff2b705fd2117686
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode has a setting for script phases to filter out the environment
variables, so we don't need to use grep.
Change-Id: Ica1c64321385ab3e3b47cf6f8f4d4191bd963540
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
we strip the path a few lines above already.
Change-Id: If7524b8e744d2f1ab2f5a6920097d25671449829
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's easy when it is a simple list of files (or just absent). however,
it can also contain expandos, and in this case it's definitely not a
good idea to treat it partly (but not really) as a single shell command.
Change-Id: I7ef32a56f276b06579fc7094357c5f7612eaf205
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first replaceExtraCompilerVariables(..., NoShell), then fix the final result.
Change-Id: If8cebeaa59f48d91b33b5a74e6a48a0d2d049643
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason why there should be unexpected leading or trailing
whitespace in an extra compiler's .depends list.
Change-Id: I46be75063180131e135fc6eea0238a482073618a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use of FileFixifyAbsolute with non-default in_dir and out_dir
is not defined (and produces bogus results).
Using FileFixifyRelative when handling QMAKE_BUNDLE_DATA as a relative
path is fine.
Change-Id: I49902dc9f5b8029d092a4419c0cff5483e419c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 8ee2e497 introduced a regression for CONFIG-=flat vcxproj files.
Files with custom build steps (e.g. foo.h with Q_OBJECT) were written
into top-level filters ("Header Files" instead of
"Header Files\my\sub\dir").
The assumption that the parameter filtername always equals
VCFilter::name was wrong.
Change-Id: Id5178550310d06b73e42f18597a27012ddd89bb7
Task-number: QTBUG-44413
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We already have saved this information in the loop above.
Change-Id: Ic0e0a66b01e9ee001932d7d798d848abc746ef95
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 4f21eb03 broke the generation of non-flat vcxprojs.
XTreeNode passes filter names to outputFileConfigs that have
the source subdirectory suffixed (e.g. "Generated Files\subdir").
Function filterByName must be called with the substring before the
backslash.
Change-Id: Ic259e6316ab0727828773b13e0d8ad0cc7f0808f
Task-number: QTBUG-41746
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This reverts commit e5a8134765.
A much simpler fix for QTBUG-41746 is about to follow.
Change-Id: I1eea1785e00b4d7d470108d8dc3272a2af438ef4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
qmake seems to be adding current date/time to the .la files for no
reason, so let's stop do that.
This way, two invocations of qmake actually gives bit for bit similar
output of .la files.
Change-Id: I93c7c4075cc1e05214849eec8629f41ce01e5914
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it makes no sense to test for OBJECTS_DIR emptiness when we are going to
use DESTDIR instead.
Change-Id: I0f7115fc8a9fe2a996417d5f50bd0165773129fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
that makes no sense at all. and OBJECTS_DIR is not resolved, either.
Change-Id: Ie76b9de6bb11ae42945255f2e168943066d2f60d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
MakefileGenerator::init() fixifies the variable, so there is no point in
the windows generator adjusting path separators as well.
Change-Id: I9331631125ee16ce4d64e38153f3c67f2f78b16b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this is admittedly a rather improbable use case, so unlikely to have any
real world effect.
Change-Id: If98f0de90043525f0555f8ddf98f8b4352e5a0a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... because it also fixes the path, and we'll need the "plain" name later.
Change-Id: I86da8f53e44a68005c413c4b78b1b1682746e22e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we (supposedly) fully support QMAKE_EXTRA_COMPILERS, so there is no need
for any special casing here.
Change-Id: I4e9d389320a3e5ad0acbf73823ff1e6f7b9c370f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's debugging code which is used only once (if even uncommented).
Change-Id: Ie57347017dd24f4acecff2a7132f82898dea3122
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
more efficient use of string functions.
Change-Id: I3d95d6379eaab025b18449b706f93631a2132aad
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the path is processed, and afterwards fixForOutput()ed again. the first
call makes no sense (even if it registered some variables that are gone
in the second call, that would be pointless exactly because they are gone).
Change-Id: I251f1e4858bec36f3a7a9427c2ba78031b35a2d3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
commands come already fully expanded and quoted from the project.
Change-Id: I239d5c305f5f65d32c832bc09bfd1c322051e149
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
no other generator does it. if it actually buys anything, it should be
re-instantiated differently.
Change-Id: I8431702ac7d558d65fd28a7f9e36bb49db2eb253
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the logic was such that if the bundle name already had the specified
extension which was not the default extension, the default extension
would be appended, too. i don't think that was the intention ...
now we simply put the default into QMAKE_BUNDLE_EXTENSION if its empty -
the variable is not used anywhere else where it would be expected to
preserve its emptiness, so this is safe.
Change-Id: Ied34d10f9fe60756bddc0037dcb2f1d3bbfd3e12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reference to it anywhere.
Change-Id: I72403be6c8294d9b2e64075ebd428eba24d97097
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this isn't some fuzzy logic, the call sequence is well determined.
Change-Id: I1696b49ed687da83d2969efcfe23ac6565630020
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it never left the rudimentary stage. should it ever be re-added, it
needs to be done basically from scratch anyway.
Change-Id: I76858c8a2c90235f228f7a6e5a178a10a2669d37
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
When there are source files with the same file name in different
directories of the project, then nmake's inference rules might pick up
the wrong source file. Note that this even happens when only one of those
files is in SOURCES. The existence of conflicting file names is enough
to cause hard-to-find build failures.
The usual work-around for this situation is CONFIG+=no_batch.
This is now done automatically when a conflict situation is detected and
a warning message is printed.
Task-number: QTBUG-13496
Change-Id: Icd81027407d3d489dbc50231e5ed8bcb91f8d2bc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
In ancient times, the existence of QMAKE_RUN_CXX_IMP determined the
use of implicit rules. The code path for implicit rules was turned
off in 2006 (0287fe3c), which probably was a refactoring artifact.
Later, implicit rules were enabled again using a different approach.
These days, the non-existence of QMAKE_RUN_CXX determines the use of
implicit rules.
We remove the dead code path now and rely on the latter condition.
One part of the dead code is a feature that turns off inference rules if
the OBJECTS_DIR is set or source file names do not match expectations.
If somebody ever missed this, it has been reimplemented otherwise.
Or not.
Change-Id: If3ce9904d9c1df6e4048c58c2452854cce7fa206
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of having each generator do its own magic (little surprisingly,
with different outcomes), add "stuff" to the search path in one place
used by all generators. this has several consequences:
- (unless disabled via CONFIG+=no_include_pwd) $$PWD is now consistently
prepended by all generators. most notably, this was entirely missing
from the MSVC generators (both nmake and VS) - despite them needing it
most. this also affects Xcode projects.
- $$OUT_PWD (if different from $$PWD) is now added right after $$PWD,
not at the end. this precedence clarification only makes sense, given
that qmake tries to make shadow builds as transparent as possible.
- the qmakespec's dir is now consistently appended. the UNIX and PBX
generators prepended it, while the rest already appended. few files
actually include qplatformdefs.h, so having it late in the search path
seems reasonable.
- the effect of CONFIG+=depend_includepath is now fully consistent with
the actual include path.
Change-Id: I5f7570183351ade29342ea74fef706a0738842bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
neither qmake_getpwd()'s return value nor a fileFixify()'d version of it
can be empty.
Change-Id: Ic3b7d20becc57209b9dbe71ad9dc8e7547d435b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These mkspecs are not supported and no longer compile. Related support in
qmake has also been removed.
Change-Id: I7706dcfa5471e55e2ae3d580d65e9371e2c652d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
On Windows, the application manifest file can be linked with the
executable, to specify for example the requested privileges of the
application. On MSVC nmake, the manifest is already handled in
NmakeMakefileGenerator::writeBuildRulesPart, but it is not compatible
with MinGW. On MinGW, this manifest file has to be referenced in the
Rc File. This patch simply handles the existing variable
"QMAKE_MANIFEST" which defines the appropriate line RT_MANIFEST in
the RC file.
Task-number: QTBUG-42454
Change-Id: I921606e002ffe3801c537f30ac2365891f97d5c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Running 'make distclean' should remove all files generated by qmake,
including .qmake.stash/super. These files are considered owned by
a particular project (and hence a candidate for distclean), if it
lives in the same directory as the output dir of the project.
Task-number: QTBUG-42678
Change-Id: I224e9bac039eeacb6561e18acc7f8e867da5dab8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
We don't need to modify ResourceOutputFileName. The default is fine,
and $(InputName) evaluates to nothing in VS >= 2010.
Change-Id: Ib203d36261e1b5449c5a139b1950bd0d66197297
Task-number: QTBUG-43026
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This fixes a regression introduced by
04d3a89e20 as it left out the custom build
step for the source code file generated for PCH.
Task-number: QTBUG-42596
Change-Id: I53d5a36b842dcffbde2657910e6a96dca0e99c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With multi-architecture builds and ONLY_ACTIVE_ARCH set to NO, Xcode will
build the final target for multiple architectures at the same time, but
CURRENT_ARCH will only match one of them, so we failed to set up the
right dependencies for our pre-link step, causing the step to happen
after linking in some cases.
We now build an exhaustive dependency list based on QMAKE_XCODE_ARCHS,
so that ONLY_ACTIVE_ARCH=NO can be used for release builds targeted at
the App Store.
Change-Id: I6702f020a6970807adc624779f6dde09be62beb9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Refactor the current app CFBundleIdentifier support:
handle frameworks as well. Add @BUNDLEIDENTIFIER@
placeholder to the OS X info.plist.lib templates.
This means the Qt frameworks will now get a valid
CFBundleIdentifier entry the same way as app bundles:
by extracting the identifier prefix from Xcode settings
and appending framework name.
Task-number: QTBUG-32896
Change-Id: Ica8f28332a88e37a823c46fca7a2c373157af020
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since commmit 0127962e47 the
PBXResourcesBuildPhase is used only for ICONS, because the old
behavior of using it when target path is not given differed from
the documentation and behavior of the makefile generator by using
Contents/Resources as target directory when targeting osx.
The PBXResouceBuildPhase optimizes png, compiles xib or asset catalogs
and copies the rest.
The advantage is that it makes it easy to add resources to the bundle,
the only problem is that the target directory is always the resource
directory.
The copy operation currently used does not compile resources, which
makes adding .xib (for the Launch File required to support iphone 6)
and asset catalogs difficult.
So we restore the old 5.3 behavior for ios, and use the build
resources phase when possible on osx (target Contents/Resources).
On osx this still implies a difference between the makefile
generator and the xcode generator: only the latter compiles resources.
Change-Id: Id1853693e88fc46562b044efdea2bf5f9da2c98c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The settings of the librarian were never written.
Creation of static libraries only worked by accident.
Adapted the code from the vcproj code path.
Task-number: QTBUG-30712
Change-Id: I69917f44305eb458647392d222db477fe5a5b7c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Second attempt. MSVCPROJ_TARGET contains the resolved target name,
including version number and target extension.
We're splitting this value into PrimaryOutput and
PrimaryOutputExtension.
PrimaryOutputExtension is only written if it contains a non-default
value.
Task-number: QTBUG-26782
Change-Id: I4b828dc5dd47322f653585aee1a5767f0cf8bd48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit af760349 in Qt4 broke the possibility of having a
PRECOMPILED_SOURCE in a different directory than the
PRECOMPILED_HEADER.
Do not write the PrecompiledHeaderThrough value for the
PRECOMPILED_SOURCE, but use the project default.
The msbuild code path needed adjustments to write the
UsePrecompiledHeader value, even if PrecompiledHeaderThrough is
empty.
Task-number: QTBUG-41917
Change-Id: I74e621f6618cf056e3967c99a2215f76c346b9ee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 4f21eb03 utterly broke the project file generation for
VS 2008. The introduced filterByName convenience methods looks for
filter names like "Generated Files", but the code path for
VS <= 2008 used filter names like "GeneratedFiles".
The generated projects were valid but empty.
This commit ensures that both VS generators use the same filter
names.
Task-number: QTBUG-41821
Change-Id: I828fa911bae8d835b073a4c2260316127cc72cda
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 4f21eb03 broke the generation of non-flat vcxprojs.
XTreeNode passes filter names to outputFileConfigs that have
the source subdirectory suffixed (e.g. "Generated Files\subdir").
That's why the original code tested the filter names with
QString::startsWith.
I've changed the signature of outputFileConfigs to take a filterId
parameter which contains the unaltered filter name (e.g.
"Generated Files") that will determine the correct filter.
Task-number: QTBUG-41746
Change-Id: If33428526a098f433cd6ceb8ab6608bd9f94ef17
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise we'll produce lines with tens of thousands columns when
dealing with QMAKE_BUNDLE_DATA.
Change-Id: Ia2a70f25e4ee1d3fe976027a7c46d234809a3f70
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
According to Apple's documentation [1], framework bundles don't
have a 'Contents' folder. Instead, each version folder gets a
'Resources' folder which contains the Info.plist file, and which
is also symlinked at the top-level framework folder.
[1]: https://developer.apple.com/library/mac/documentation/macosx/conceptual/BPFrameworks/Concepts/FrameworkAnatomy.html
Task-number: QTBUG-32895
Change-Id: I5e55cc097b179012add0ceb7c567dace8e282895
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
the target path may have multiple components, e.g. Headers/private.
obviously, only the first component must be linked in such cases.
Task-number: QTBUG-32895
Change-Id: If632b3b72c170a9fde36e62c165e06ded53deda3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
multiple QMAKE_BUNDLE_DATA entries can install into the same directory,
but it obviously makes no sense to symlink that repeatedly.
Change-Id: If65f7acdf4e158e33511917a027a380e642e2f28
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
instead of duplicating the plist/icon/bundled_files logic just to obtain
the dependencies, create them as a side effect of the actual target
creation.
Change-Id: I6a0fe26c82c490b1040a7a06d5d0e7a4567ae1af
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add @FULL_VERSION@ -> Qt version substitution to
unixmake2.
This makes the Qt-generated Info.plist files compliant
with the bundle signing/validation process.
Task-number: QTBUG-32896
Change-Id: I1818f028c2f740d699629dd78cc0fe6ffaf94a1c
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We do so by setting a 'no_plist' config property. Can be overridden
with 'force_debug_plist'.
The debug version of Info.plist would overwrite the release version,
and it also happens to contain invalid data. In particular,
CFBundleExecutable would contain the _debug suffixed libname, which
it shouldn't. See the entry about CFBundleExecutable on
https://developer.apple.com/library/ios/documentation/general/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html
Task-number: QTBUG-32894
Change-Id: Ideb018e4768a7c4e276e1b07d77937451f6db6a2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
this allows us to extend its dependencies, which we will make use of later.
Change-Id: I8809bdffb435455338e88e97049b10beeab0468a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There's a comment in VCXProjectWriter::outputFileConfigs that
states: "We need to check if the file has any custom build step.
If there is one then it has to be included with 'CustomBuild
Include'".
This patch adds the code to the comment...
Task-number: QTBUG-30373
Change-Id: Ibfef3c80630e08c743bfadce299a8b6a0c58411f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Move common code into a function
and exit early from simple search loop.
Change-Id: I88d1227653e28badc213fbe4ebe1e2a19f6e5793
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Those initializations are done by the constructors already.
Change-Id: Ife58675e2ba4854ef66c813158cb4ed660f530d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The fileAdded variable is used to save state between iterations.
There's no need for two variables.
Change-Id: I8144cf7c7b394255459295b82a7ca808bc3951da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't need the filtername parameter.
Change-Id: I653db4a200c83d095520b47e1451dfe59b956d92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Files in "Deployment Files" should be added as static content, which
happens to be the fallback in the case where checkDeploymentFiles is
false. Also, the calling code expects that an XML tag is added in all
cases. This did not happen for the "Resource Files" filter when
checkDeploymentFiles was false, which led to unmatched closing tags.
This fixes the issue that files added to RESOURCES in different build
variants produced invalid vcxproj files.
Task-number: QTBUG-30373
Change-Id: Ibb27e67641ba63150938cf826ea1881d182fb841
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Put common code into a function.
Subsequent patches will become easier.
Change-Id: I0d549886585d90e4701a2430503bc0d2d716e341
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Make use of the mythical C++ feature "function" to soothe the brain ache
of anyone who looks into this part of the code.
Change-Id: I740e29f1777d91d3b34a61fa62a5c23c222334b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If creating an asset catalog from Xcode, Xcode will
add it to the "Copy Bundle Reources" phase, if it exists.
Since we don't always generate that phase, Xcode will
silently fail with the result that the asset catalog will
not take effect (no icon, launch images etc).
This patch will ensure that we always create the phase
(like native Xcode project does), which will fix the
problem.
Change-Id: Ief949d63543977f1021db992e0c41714d898e68b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When the user adds a compiler option that qmake doesn't understand, a
warning message is printed. One can suppress these warnings now by
adding CONFIG+=suppress_vcproj_warnings to the project file.
Task-number: QTBUG-37520
Change-Id: Ieb7ad2c900329e76636047dff85824ea0456f608
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If defined, the value of this variable is prepended to the built shared
library's SONAME identifier.
For more information, see: qmake/doc/src/qmake-manual.qdoc#qmake-soname-prefix
Task-number: QTBUG-31814
Change-Id: I4bceaf0c93162e4fad6bb424af1b82e74d38acdc
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Defaults qmake behavior is to make all project RPATHDIR paths absolute prior
passing them to linker. We need to make an exception for paths starting with @
such as @executable_path (Apple platforms) or $ such as $ORIGIN (Linux).
Task-number: QTBUG-31814
Change-Id: Ie9887c0046c5030c4128dda945b491a5d389ba34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Xcode uses project and group relative file paths, but to keep things
simple for ourselves we use absolute paths everywhere. We now make an
effort to actually make these paths absolute before telling Xcode they
are.
We also make the visual representation of the files inside Xcode be
just the filename, not the full path, like Xcode itself does. This
is among other things a prerequisite for Xcode to stop complaining
about missing launch images for retina 4-inch screens.
Change-Id: I5ff6bf07f61888e3c9fe2f64cbc2beb896b8442d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We build "Supporting Files" out of QMAKE_INTERNAL_INCLUDED_FILES, which
is really not supposed to be exposed to the user like that, but since
the variable will hold user-included pri files eg., the Xcode generator
piggy-backs on this variable to list the files.
To make the project view in Xcode a bit cleaner we explicitly exclude
any file living inside the Qt directory, meaning we won't show all the
pri and prf files from Qt's mkspecs directory anymore.
Change-Id: I828700aceac5fdf3ea2b27d9ba3885543c2ad137
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
the c'tor always determines the group itself anyway.
Change-Id: Ia8f1e747aaefdab164beae34851aa99cec9b790a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
At the very least, include the files named in the sources, like
HEADERS. It was quite surprising to send a tarball that included the
.pro file and the .cpp sources, but none of the headers.
On the other hand, the .qmake.cache file need need not be sent either,
despite being include()d in qmake's processing.
Change-Id: I8f48ca3e8040f954f321f4643b01c0f36aafe2d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
With MSVC it takes minutes to compile pbuilder_pbx.cpp.
So let's remove this generator that's never used.
Change-Id: I13038d551283d96dfb0baf0b8a8a68c6538193c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Depending on *.o in the Xcode output dir did not actually result in a
proper dependency. In Xcode5 this didn't matter much, as the effect was
that the build phase was run every time, but in Xcode6 the phase was
skipped. We now depend on the object directory itself, which will get
its modification time updated to match any rebuilt object files.
Change-Id: I8fa6f06c9008c4ce8f7fde7706057ce101bb5727
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
the condition is now consistent with that of the target itself (which
means that by setting target.CONFIG=no_dll one can actually suppress
installing the target itself even if it's not a dll, but anyway).
Task-number: QTBUG-39253
Change-Id: Id4684a550a33b463594ab537eaa9e1cbfb61e4ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The original dist target no longer copies files around, but
merely does the final packaging. It depends on a new recursive
distdir target, which handles copying distfiles to the distdir.
[ChangeLog][Tools][qmake] Added 'make dist' target for subdirs
projects (unix only)
Task-number: QTBUG-21910
Change-Id: Ib59139c3fe196caf832d8dcefab484ab91f1f5ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A typo caused qmake to stop output dependency information
added by the depend_command clause.
Task-number: QTBUG-13334
Change-Id: I00fabc87438ce94e80341e6f88aa2e0eaab57e19
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch removes the need for the user to put a dot at the end of the
bundle prefix which makes it's use more consistent and intuitive.
The prefix is based on what Xcode calls the "Company Identifier",
basically "com.digia" plus the product name. Changing that to
"com.digia.prefix-" and the product name to "Foo" results in a bundle
identifier of "com.digia.prefix-.Foo" which is in line with Xcode.
Change-Id: I9b62fc4dee1df51b523ce890a8896ea58ea2c62d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Instead of sometimes ending up inside Content/Resources. The two build
phases PBXCopyFilesBuildPhase and PBXResourcesBuildPhase have different
semantics of where to place the files. For the former we use the root of
the bundle as the destination, and this is how QMAKE_BUNDLE_DATA is
documented and used, as well as how unixmake2.cpp implements it. The
latter on the other hand, always ends up in the resources subdirectory
on OSX.
Task-number: QTBUG-35318
Change-Id: I45bbd0dfe7ea78ae330ecb0c91efa74e1c76c9eb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The ICON qmake variable is implemented in the Xcode generator through
the ProjectBuilderSources::files() function, where we append the icon
to SOURCES (for some reason). This means we can't exclude non-object
sources when writing out PBXBuildFile entries, as the icon file entry
is referenced later on in the bundle resources phase.
This is a partial revert of 66f6e5b162 which introduced the broken
logic.
Change-Id: I120d2325165a1eefd3961a9162e9e5eb3a576c36
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
If the project has a custom Info.plist assigned to
QMAKE_INFO_PLIST, we should leave it as-is without
scanning and replacing contents inside it. Since we
always copy the file to the build folder at qmake
time, any later attempts to modify the source file
will not have any effect.
A better solution is to just reference the custom
plist directly from the Xcode, without modifying it.
This change will also stop unixmake2 from assigning the
default plist to QMAKE_INFO_PLIST, since we need to
know in the xcode generator if the variable was set in
the project or not.
Task-number: QTBUG-38260
Change-Id: I3c488b2960170c544d94f9db89d3ca95ee290bdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Qmake tried to extract the actual executable part of an
extra compiler's commands and depend_command value and
then "fix" it by replacing the directory separators in
it with their local versions and calling QDir::cleanPath
on it.
This misfeature was implemented incompletely and led to
unexpected results (see the numerous attempts to fix
QTBUG-16372).
The user is responsible for passing a correct command by
calling the shell_quote or shell_escape functions if
necessary.
Change-Id: Ic4bfe9eeb697775cd99c865e7a9d335e63605dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A pro file that adds files to QMAKE_BUNDLE_DATA using relative
paths will fail building if doing shadow builds. The reason is
that we look for the files inside the build dir.
This change will make sure we resolve files from the source dir
when not using full paths.
Task-number: QTBUG-37054
Change-Id: Ic1067861097b3b6a640ee862472d728d6188576a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
f412f2b5 refactored the platform tool set retrieval, but made the
call too early to choose the right tool set on Windows Phone. This
fixes the call so that it does not depend on the WinPhone member variable,
and also makes it forward-compatible with Windows Phone 8.1.
Task-number: QTBUG-38516
Change-Id: Ide91563f5c7f909c4d1a258adc29af6c94595dc9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Android, there's a limitation set on the names of the libraries
you deploy that they must start with "lib" and end with ".so", so
Android apps will link against and deploy with the unversioned
libQt5FooBar.so libraries. When cross-compiling on Windows however,
due to the lack of symbolic links, the only installed library
used to be the main library target "libQt5FooBar.so.X.Y.Z" (for
version X.Y.Z.) This has been worked around in packaging, but
breaks building add-on modules on top of Qt, and is clearly
wrong.
This patch introduces a new "unversioned_libname" configuration
in qmake which is currently only supported for the Unix makefile
generator and only enabled for Android builds. When it is enabled,
only the unversioned library "libQt5FooBar.so" will be created.
Task-number: QTBUG-38347
Change-Id: Ia8897ca7a23a62e2a526d0e02854899b02eb19dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it needs neither native separators, nor a trailing separator.
the QMAKE_PKGCONFIG_INCDIR default was already ok.
Change-Id: I1048b3870fd3ca09aa76b41aecda7d90402aa64a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
fileFixify must not be called twice on the same file path, since it will
convert an absolute path from the shadow build to an absolute path in
the source dir. The first fileFixify occurs in MakefileGenerator::init,
along with the fixifying of INCLUDEPATH.
Change-Id: I607870573a80eaf834ea5f540bbe1451ec983114
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
To enable windows xp support, we must do two things:
1. linker flag must be /SUBSYSTEM:CONSOLE,5.01 or
/SUBSYSTEM:WINDOWS,5.01. For x64, the version is 5.02.
2. Do not use Windows Kit 8. Win SDK v7.1A is recommended. Prepend the
right include paths and lib paths to INCLUDE and LIB before
building.
The Windows XP target support is enabled by passing "-target xp" to
configure.
Task-number: QTBUG-29939
Change-Id: I84c8439606cc2a9d27d64947702846faa4f1e4a2
Reviewed-by: Lucas Wang <wbsecg1@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In a subsequent commit we will need access to more information of the
project object. This is merely a refactoring.
Change-Id: I40e501d037eb7d0295e1057e7b86e404e88e6ca3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since VS 2012 the linker supports the /MANIFEST:embed option, which can
be used to embed the automatically generated manifest without calling
mt.exe. Using this feature simplifies our generated makefiles, esp. in
the case of incremental linking.
Task-number: QTBUG-37363
Change-Id: I2c2d8d2abf36c1b9e7b41bc15244344aab8f5b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Windows SDK 7.1 command prompt sets this value to "WindowsSDK7.1"
through its SetEnv.cmd batch script. The MSVC Express Editions do not
include a 64bit compiler toolchain, but the Windows SDK does, so this
change makes it easier to build qmake projects for x86_64 when using
the Express Editions, by running qmake from the SDK command prompt.
See also:
http://msdn.microsoft.com/en-us/library/9yb4317s%28v=vs.100%29.aspxhttp://msdn.microsoft.com/en-us/library/ff660764%28v=vs.100%29.aspx
Task-number: QTBUG-31185
Change-Id: I49d3e159ed67f64490a3d57c5471d540d76ae13f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When running a amd64 VS shell we must not call the x86_amd64
cross-compiler, because it won't be able to start.
Instead we're calling the native amd64 compiler now.
Change-Id: I6968cde3b24c1938b6e0d82f513e49724455f3cc
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Currently the bundle identifier is build using com.yourcompany +
QMAKE_BUNDLE. This patch adds the handling of
QMAKE_TARGET_BUNDLE_PREFIX to build the bundle prefix.
Task-number: QTBUG-19006
Change-Id: I014279da6dbef393b0df36f6d4995e40ab105316
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
/FS forces the compiler to synchronize pdb file writes.
This option is not needed when building with Visual Studio itself.
Still, qmake needs to know it when parsing the compiler flags.
Task-number: QTBUG-36535
Change-Id: Id5b68c4028844e0b95904e08b5121310a4ff13d6
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This was broken for shadow builds. Adding the output directory to the
manifest file name fixes the problem.
Change-Id: I9e5b47a08f80f7afcfd76e13784fbaec912e50ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If VCPROJ_ARCH is not recognized or unset, make "arch" default to x86,
or link won't find the libs.
Change-Id: If2cbda37a80c0fa43e1464775c036cebf10f931a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This variable works like CLEAN_DEPS, but applies to the distclean target.
Change-Id: Ia30e8932b9acd6529298728dd5d0e038b0208d66
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In release configs qmake sets DebugInformationFormat to None.
If ProgramDataBaseFileName is left unset, then VS 2012 will always
rebuild the complete project. Therefore, qmake now inserts an empty
ProgramDataBaseFileName tag if DebugInformationFormat is None.
Task-number: QTBUG-35570
Change-Id: Ifb91b0bbcf6614621bfe3b12429e2624bd16e77a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VS 2010 doesn't denote "no debug info" as "None" but as empty tag.
This fixes a regression introduced by
7c3efdfb6a.
[ChangeLog][qtbase][qmake] fix VS 2010 project file generation
Task-number: QTBUG-35610
Change-Id: I18ae69a842d0b679a781f8d24c026d422da3a857
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Assume that C and C++ headers found in system paths will not change,
so we don't need to tell Make about them, nor do we need to scan their
contents either.
The previous qmake behavior matched gcc's -M switch; it now matches
the -MM switch:
-M Instead of outputting the result of preprocessing, output a
rule suitable for make describing the dependencies of the
main source file.
-MM Like -M but do not mention header files that are found in
system header directories, nor header files that are
included, directly or indirectly, from such a header.
This goes hand-in-hand with our use of -isystem to pass system paths
to the compiler.
Change-Id: I3346b6da496fe6495ac89c5286d066b343116f0e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not include the project file twice or other
.pr? files outside the project tree.
Task-number: QTBUG-21910
Change-Id: I62af842282ccdc5b9099d9227d5395ebe3f0698c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a preparation step for 'make dist' target for subdir projects.
UnixMakefileGenerator needs these variables while extending
writeSubTargets() and writeDefaultVariables() for 'make dist'.
Partial cherry-pick of
https://qt.gitorious.org/qt/jpnurmi-qt/commit/8c4ef19
Task-number: QTBUG-21910
Change-Id: I02a616a98448bc3041ef0f4fd034bfb4c2199e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of multiple VS installations, a static variable wasn't
initialized. That led to wrong values in subsequent calls of the
detection function.
[ChangeLog][qtbase][qmake] fix detection for multiple VS installations
Task-number: QTBUG-35530
Change-Id: I3fc23bc99679fff640f39578a7074d16fe923334
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This adds the required members to allow setting the SDK version, and uses
them when creating WinRT projects.
Task-number: QTBUG-35328
Change-Id: I500ea77c41e27cbcc850462034c0eba8c5d1f124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When creating a MSVC project file for WinRT/WinPhone, the package
manifest and all referenced icons should be automatically added as
content items.
Task-number: QTBUG-35328
Change-Id: Id7f34388c5ba6746392ddadbb795ef47bef34af6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Visual Studio will default to generating metadata, even if it is not
written to the vcproj. Since there is no metadata file, the build will
fail. This change keeps a saner default for this option when generating
WinRT project files.
Task-number: QTBUG-35328
Change-Id: Ie693e270ef0b9d9677d53af0c60905f048235bc5
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Some cross-compiling mkspecs may require a different MSVC version than
the one found in the path (or the default version). This change allows
the preferred MSVC version to be selected from the mkspec's MSVC_VER
variable when found.
Task-number: QTBUG-35328
Change-Id: I19e03101e3921dfd5026421aef4630e11b9f131e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Right now, the sublib targets, if any, show up between clean and
distclean targets. That's silly.
I doubt anyone is using sublib targets anyway, but...
Change-Id: I2beffc69f68fa7626ff4aa4a7cc1169b2c6c69a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default values for PCH, the -ZW switch, and CharacterSet aren't
ideal for WinRT projects, so adjust these accordingly.
Task-number: QTBUG-35328
Change-Id: I78021d0785fa84e15b1f17264daa599a9418f92e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the respective code was removed in 375edf7
Change-Id: Ie31ef4bc8970b5396f50f1c4963f378df816242a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the 'Wrapper' destination of the PBXCopyFilesBuildPhase
will be empty, and the files end up outside of the application
bundle.
Task-number: QTBUG-34457
Change-Id: I799db28185a6c5d3d940602914fd8ba14c538bf2
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
this avoids the nasty and conflicting vcXX0.pdb files in the build dirs.
VS will already do that.
Change-Id: I7bddaecf3f478edc78cd6654b5a1038db4fe04ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the restriction to dlls is entirely unjustified.
Change-Id: Ia518dd16189572dea9e8f4280c88801b1393694e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this option suppresses the installation of target (leaving only
dlltarget). however, it still installed target's pdb file.
Change-Id: Ia686a647c101ca66e74944d23171e120fc74515a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Starting with MSVC2013, a separate set of libs for Windows Store apps is
supplied, so make sure it is in the LIBPATH (and before the desktop libs).
Change-Id: I74f3f385c2db749010fbfe7e2d4c3d1228e4e603
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
