Otherwise socketDescriptor(), localPort(), localAddress(), peerPort(),
peerAddress(), and peerName() remain uncleared until close() is called.
This could take place when the connection is closed by the remote
endpoint or the user calls disconnectFromHost(). After disconnecting,
connection parameters are no longer valid, while I/O device is still
opened and may have pending data for reading. Usually, the user reads
all incoming data and closes the device independently.
Change-Id: Ic898851c39137faf64019949910f0d94ebb79df7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace QString::left() with QString::leftRef().
Use QStringLiteral more.
Change-Id: Ibcecc666d034a5e1fe963119483030ab397b16b1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Output regions as a compact list of rectangles:
QRegion(2 rectangles, 50x200+100+200, 200x50+10+10)
Change-Id: I62e42bd30897a1d31b28e0cbd6afe7fa8ecf2664
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit dc0ae02ebc.
qdoc is a binary built inside the qttools repository, thus it should be added
to the respective ConfigExtras.cmake.in there instead.
Task-number: QTBUG-54446
Change-Id: I182e5889af164a89c68226a91abc4d9962a508ea
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
FreeBSD < 10 doesn't have the LLINDEX macro either in net/if_dl.h, so besides
OpenBSD yet another condition to declare the LLINDEX macro for systems where
it isn't present does make it more complicated than replacing its usage with
the actual code.
Change-Id: I7e8ef3e265564526e05ec3115f9fa765d399f045
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
1) In general it's unsafe to let exceptions propagate through Qt code,
so document that.
2) Add a note that overriding notify() makes sense only in Qt 5, in Qt 6
it's going away.
3) The advice applies also to applications not using QApplication, but
just QCoreApplication.
Change-Id: I4f6e74c53da757faf2eeaa9de226ceba55c52536
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
(QT_VERSION % 0xffff00) is useless for now, as QT_VERSION < 0x1000000
(for now). The author of this code probably meant to use bitwise-AND.
But even that is unnecessary as the right shift discards the lower 8
bits anyway.
Change-Id: Ie585843cfb684bc3b6e3fffd145d533b05288dfc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... and reject invalid ones. There was one error: we accepted schemes
starting with pluses, dashes and dots.
Change-Id: Ie585843cfb684bc3b6e3fffd145cfe12227ec4ad
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes the 2. of QTBUG-52108
Change-Id: Id887f470c7822f6b264d6b739e8658d9809f6609
Task-numer: QTBUG-52108
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If QMainWindow::GroupedDragging is enabled and there are QDockWidgetGroupWindow,
we should still show actions for these QDockWidgets in the context menu
Addresses point 4. of QTBUG-52108
Task-number: QTBUG-52108
Change-Id: I11ae401c4fe15e213b0f26e7579634e2062e953c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This will allow dropping of files from Qt applications to applications
like Skype, which only accept "text/plain", but not "text/uri-list" or
"text/x-moz-url".
Task-number: QTBUG-53238
Change-Id: I01bca5c8e20647cedfc9323f542ab07f0cc48658
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
A Qt5 program writing a null QTime() using setVersion(QDataStream::Qt_3_3),
and then a Qt3 program reading that, would lead to a weird QTime,
with isNull=false, isValid=false, hour=1193, minute=2, second=47, ms=295.
This commit restores interoperability, by writing out the expected value
(0) for a null QTime rather than the -1 value used by Qt4 and Qt5.
Change-Id: Icde468a8f6fc9434ef7018296725819b44d672af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of creating a QDateTime object.
Change-Id: Ib57b52598e2f452985e9fffd145a36911de4fa9a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Found by the Intel Compiler 17 Beta on Windows:
qformlayout.cpp(68): error #177: function "<unnamed>::FixedColumnMatrix<T,
NumColumns>::addRow [with T=QFormLayoutItem *, NumColumns=2]" was declared but never referenced
Change-Id: Ib57b52598e2f452985e9fffd1458f6a3c3a609dc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Serialization of the Qt container classes is accomplished by breaking
up the data into primitive units. On the receiver side, these units
should be read atomically to guarantee integrity of the container.
Deserialization procedures for QHash and QMap were already implemented
in accordance with this strategy and have the following behavior:
- a previously latched error status is saved for the caller. This
overrides possible different errors in the current read. This
is consistent with the treatment of primitive types.
- if an error occurs during the deserialization, the container is
cleared.
To make the API consistent, this patch adjusts the behavior of QList,
QLinkedList, QVector, and QSet deserialization. On the implementation
side we accomplish this with a private StreamStateSaver RAII class that
consolidates the handling of the stream status for all containers.
[ChangeLog][Important Behavior Changes][QtCore][QDataStream] Incomplete
reads of Qt containers are now handled same way as for primitive types,
meaning that previous errors are latched.
Task-number: QTBUG-54022
Change-Id: I5c77257fe2a4637e8a7e6cf3cd43091c8469340e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Be explicit on how to check whether parsing succeeds.
Change-Id: I44f408cb6e5a830826b84dfb3a8af331f03e58cc
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
NetBSD is heavily dependent on using rpath, so we need to add the
lib dir QMAKE_LIBDIR and QMAKE_LIBDIR_X11 to QMAKE_RPATHDIR
explicitly to avoid linker errors. See http://www.netbsd.org/docs/elf.html
for more info.
Change-Id: I225143d5e2d9a125060b14e3a8a7953927d63b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
1) To describe a protocol version we should use an "ordinary" name,
not use the values out of the QSsl::SslProtocol enum.
2) Say that we support the latest stable TLS version (1.2, not 1.0).
3) Fix a statement about which protocol is the default one.
Change-Id: I18732914d55060a0c3920f7082f986c262a71ded
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Restore code path returning the resource pixmap for platforms
that do not have themes in QCommonStyle.
Amends change b657496a0b.
Task-number: QTBUG-54425
Change-Id: I764408622b825b86afbe7ccf37e1498d3efb3850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
It could be reached when QT_BOOTSTRAPPED was defined.
Change-Id: I632d6f908a3bcbde81a6ebbadcaf2800dfe1449d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Seems the previous check was a leftover from debugging. Tests still pass
and loop checks properly now.
Change-Id: Ic12cd49881f6d146687e257794b3028f6c8e874c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
1. QSslSocketBackendPrivate::transmit can invalidate SSL context
causing subsequent SSLWrite or SSLRead calls to fail; these report
errSecParam (as null context is an invalid parameter) spuriously,
when we should rather report the cause of invalidation. The OpenSSL
backend can trigger this when it aborts connection during an SSL
handshake, on an sslErrors signal. As transmit() emits readReady(),
a directly connected slot can trigger the same problem if it aborts or
closes.
2. If during peer verification (and in checkSslErrors) we disconnect
on sslErrors signal, peer verification must be considered failed and
should not continue handshake/set connectionEncrypted.
Task-number: QTBUG-52975
Task-number: QTBUG-53906
Change-Id: Iacd3b489a4156e25ef3460ace40d21f34a946bed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We should not remember the wrong undocked geometry. If the dockwidget is not floating,
the geometry is not relative to the global coordinate, it makes no sense to store it.
Task-number: QTBUG-53808
Change-Id: I242467d8da62d7c787eca2c784aeec646236cb44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Calling `xkb_state_update_mask` with correctly set `depressed_mods` allows xkb to
return keys on level three or above (and not the equivalent level one key).
To preserve level two shortcuts (return equivalent level one key)
`depressed_mods` gets only set, if the pressed key is on level three or above.
Example shortcuts which now will work:
Shortcut German Layout (de) [AltGr is a level three switch]
Ctrl+@ Ctrl+AltGr+Q
Shift+1 Shift+1 (as before)
Shortcut German Neo Layout (de neo) [1] [AltGr is a level five switch]
Left AltGr+S
[1] http://neo-layout.org
Task-number: QTBUG-53121
Change-Id: I637a01edc9f2f92a5d3e7a24f5051fb1d3ac2f7f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The file is read using CRLF line convention on Windows.
Task-number: QTBUG-24226
Change-Id: Ie08fa603e29c80a42de4bfbfd1f4237f53c22b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Point to the README.md of the project; the old URL
http://code.google.com/p/angleproject is now redirected
to the bugtracker.
Change-Id: I293fc150d5b6c08f16effe8921010050faa264b5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Silence warning in case DPI awareness was set externally unless
debug is enabled.
Task-number: QTBUG-54416
Change-Id: Id48769e3d4be3047f582e331633905c640930f21
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Send synthesized expose event while shrinking the QWindow. This fixes
the regression which can break some applications which need the paint
events while shrinking the QWindow.
Added auto test.
Task-number: QTBUG-54040
Change-Id: Iaa992abba67f428237fa12c6cae56592b8fcadb0
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
"GUI application" is quite confusing, because in fact, these models
are part of QtWidgets and thus require QApplication instead of
QGuiApplication.
Change-Id: I35ccc8bfeb74c75a84b2ffbe1cab0c0839495980
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Search's implicit cast (QModelIndex to QPersistentModelIndex) is slow.
Use cheap pre-test to avoid when we can.
Use method from 1d859ef805
Change-Id: Ic3d06869de717963bad6357abb99f3e025642078
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... instead of using erase() in a loop, with quadratic complexity.
Change-Id: Id9c70a0d1d27b5057e5bf64c315bd66cbcd67330
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reference an SQLite3 function to verify that the library is being
linked. Discovered that the test didn't do this when I switched the
Windows configure to use a compile test to determine whether the
system has SQLite3. The test passed even though the initial
configure changes failed to provide the test with information about
the SQLite3 libraries.
Change-Id: I3114cfc2dec3a42a60c8e1e432eb8375b440d7e0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
using the Makefile target separator to determine the host system is of
course not a terribly good idea. the correct variable to query would be
DIR_SEPARATOR, which always reflects the host. however, a direct os
query is less obscure in this case.
Task-number: QTBUG-54346
Change-Id: I6bc1372a7c9a84a241a97f9f767f046b026411c3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
windows and xcb enables SwitchableWidgetComposition meaning that widget
backing stores will fall back to the normal flush path when no render-to-texture
widgets are visible anymore in the window. This switch however can lead to
artifacts with the image of the rtt widget remaining visible until the next
full bacinkgstore sync. The safe and simple way around this is to do the
switch only in the next flush, keeping the flush where the switch is
discovered on the OpenGL-based composition path still.
Task-number: QTBUG-54241
Change-Id: I1d3f10999f69c58efa791dd724891add56949dee
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
