Removed duplicate "for the".
Function list was sorted except for sprintf; so sorted it. Also, minor
grammatical improvement.
Task-number: QTBUG-64362
Task-number: QTBUG-64363
Change-Id: Ia47c5195011a0e578e916897b3a5ddb1d78170ad
Reviewed-by: Frederik Schwarzer <schwarzerf@gmail.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Links to width(QChar) are incorrectly linking to QChar rather than to
the intended QFontMetrics::width method.
Task-number: QTBUG-65141
Change-Id: I1647885c735011ec3d99c535fdb8b7fc1bf57f99
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Right now we are using the C++ compiler here, which relies on
the compilers automatically switching mode. This behavior is also
deprecated in newer clang versions and block clang developer
builds.
Task-number: QTBUG-64822
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I4d3c00ac528a45934c85777f42d243d0fe367c92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the OS supports it, we will now log to the Apple unified logging
system in addition to the normal stderr output. These logs can be
inspected via the Console application, or the 'log' command line
tool.
See https://developer.apple.com/documentation/os/logging
[ChangeLog][QtCore] Apple Unified Logging is now supported on Apple platforms.
Task-number: QTBUG-38156
Done-with: Jake Petroules <jake.petroules@qt.io>
Change-Id: I2ab92bd192d5b98aaf77e41501ea7b1ca6ef2425
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The possible key sequences for QKeySequence::Copy on X11 is Ctrl+C, then
Ctrl+Insert and at last F16. The order is defined in
QPlatformThemePrivate::keyBindings.
Task-number: QTBUG-46053
Change-Id: I86a0767e268088edfce98cfb07f9fb78f00d0713
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The idea behind this code was to check, whether no
button was pressed. !isPressed only checks, whether
XButton2 was pressed though.
Change-Id: I358816fa62d230abf82116f0da7bc3a5e43fbaf6
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
With the previous implementation mouseLeave events were
broken as we did not remember, which window was initially
affected by events and naturally there was no window under
the mouse for these events.
Now we save the currently affected window and use this
information for leave events.
Change-Id: I4036ce5e6621b507232d258dbb54c7f40a345899
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
If the mouse button is released outside of a window,
we did not trigger a mouse release event.
Task-number: QTBUG-66088
Change-Id: I3ef6234cc922c8c59ac3aa6350783fae4ba36bda
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
With the previous implementation the detection of the
affected window (windowAt which uses QWindow::geometry)
only worked for the upper left quarter of the window,
when used on a High DPI screen. As QWindow does not use
native positions, the mouse cursor's position has to be
mapped before checking the window under the mouse.
Change-Id: I1a30b9669ec3e4c573cf83aed57c20d65675ff16
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The backend will do the aborting. The handler doesn't need to do it.
Task-number: QTBUG-66295
Change-Id: I3debfc11127e4516b505fffd151166d4a8e9ec53
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change-Id: I5ae02d88aa3dcd97d1f2ebf6255a68643e5d6daa
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
[ChangeLog][Android] The application and dependent Qt libraries are
now loaded on the same thread as main() is run on, ensuring that global
static initializers, constructor functions, and main() are all run on the
same thread. The same applies during application shutdown, for destructors
of global objects, and destructor functions.
Change-Id: Id4bfece1ed2a0532ed2e8fb7d8ffd6e55d5a10dc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This means willLogToConsole does not need to consider the boostrapped
case anymore.
Change-Id: I088245362cd46c582a2a08225d22e4d2e4645c06
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes for a less awkward logic without any if (0) etc.
Change-Id: I3db0984c5a0bbf1615c2feb2ebef59b4ec16e9ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Likely fail is 3d29a0dd74. Is preventing
merge from dev, so blacklisted for now.
Task-number: QTBUG-66324
Change-Id: Ieb522897e93d4a1b4c0e423fadd4138dfb089093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
QtTestLib has its own message handler installed via qInstallMessageHandler,
so there is no need to set QT_LOGGING_TO_CONSOLE to force stderr output,
as that's what QPlainTestLogger::outputMessage uses anyways.
And in the case of using other testlib outputs such as XML, we're not going
to hit any of the code paths that would check QT_LOGGING_TO_CONSOLE.
The only relevant exception is Windows, which checks stderrHasConsoleAttached(),
which is affected by QT_LOGGING_TO_CONSOLE, but Qt Creator actually has an
explicit inversion of this existing code, to prevent it from setting
QT_LOGGING_TO_CONSOLE, so that output ends up in OutputDebugStringA
and can be read and distinguished from the debugger's output.
See QTCREATORBUG-16161.
Change-Id: Ia8a9b00b221ec5691b52485586f172c9261bf299
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The former is the preferred way in Qt to exclude code that shouldn't
be built for bootstrap tools. For qlogging.cpp this includes the
bootstrap library, and qmake, both of which have QT_BOOTSTRAPPED
defined.
Change-Id: I94b669aae308786eded92b30b5e3f63add069756
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
3d02e75c07 was too quick, and didn't account for the fact that the
old code had early returns for each alternate logging sink, so when
removing the qt_logging_to_console() check, we would end up writing
debug output twice.
This is due to e.g. Qt Creator running the application without a
console, so qt_logging_to_console() returns false, so we end up
in e.g. the win_message_handler(), calling OutputDebugString,
but then we unconditionally print to stderr, which Creator
also reads, so we end up with duplicated log messages.
Change-Id: I91573828576608643477ae27d36d7e819f92985d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we are logging to the console, we should _not_ log to slog2, like
the other log backends.
Change-Id: I6d16704c0f0923f54b3dc030d374af9805c2af06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Blending can fail if one of the input buffers is destroyed in the middle of the
streaming operation. In that case, turn streaming off so blending can be
attempted again after disabling the input.
Change-Id: Id5c82b22a2ed0858ab20902395830efa0e64177d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
[ChangeLog][Third-Party Code] Sqlite was updated to version 3.22.0
Change-Id: I341c1cabfdd43fac45406c00c33c193ef4bcf402
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some compilers will assume src and buffer are different and only
vectorize the unaliased case and take a slow path when they are equal.
In our case they are as often equal, so we need to manually unalias the
variables to make sure both cases are fully optimized.
Change-Id: I6ec86171dd179844facdf45376253c55980d9e36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All of these had already no effect.
Cleaned up a bit of code around old Qt 4 #ifdefs and
documentation mentioning Carbon.
Change-Id: Id2858c56a5785f82c47e20e1e760743fb4d08189
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
It looked inverted for some reason. A single line looks
better than before.
Change-Id: Icb214b44ddcc6e9e57fe12e7b4c3f512a5f66452
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
While the QPA theme provides support for dock widgets
title font we never use it.
This is a very similar solution to what we do in
QMdiSubWindow, setting the platform theme font at
few specific points.
This patch also fixes the dock window title font on
macOS, as queried in QCoreTextFontDatabase.
Change-Id: Ie264e4e83e0d3d1e8f78bd378359f3063cc1d525
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Not only they should not appear (icons in menus is a special
thing on macOS), they don't match the look on the window frame
buttons. So, it's better to hide them completely.
Change-Id: I8814ed3e128480abff4f53fdd40a0bb13f1796ef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There are a couple issues. Because the actual class for
the buttons returned by +[NSWindow standardWindowButton:
forStyleMask:] is private, we can't fully configure them
as we could with HITheme. Therefore, we don't get the
mouse hovered state and the zoom button will show the
fullscreen arrow instead of the '+' icon.
Hopefully, QMdiArea will go the way of the dodo soon
enough. It is not a thing on macOS and it has been
replaced by tabbed windows UI on most desktop apps.
Change-Id: Ia581f72611ad0224f42657afbc4d9f94bf5e5a3a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This is currently only used in QMacStyle since,
on macOS, the spin-box buttons are always beside
the line-edit. Hence, there is no need to tamper
with the line-edit frame.
Change-Id: I8ccfbab547fccae89a8ddeaeb7005cb17d5951e6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Bonus changes in this edition:
* The focus frame shows only around the spin-box's
line-edit, as it should. This requires getting
access to the spin-box's line-edit, which we do
by setting a property on the former. Notice that
the stepper doesn't get focus. On this point,
macOS is inconsistent (partly because there's no
such thing as an NSSpinBox, and partly because
spin-box buttons are a separate control), so we
copy the same focus behavior as NSDatePicker.
* We clean some QFocusFrame related dead code in
QMacStyle::event().
Change-Id: I204ca2093d9db343c78f0420811dda35c463bbcd
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Regression after 114f795221, which incorrectly assumed that checking
qt_logging_to_console() was a safe behavior change to include.
Unfortunately that broke debug output in Qt Creator, as Creator doesn't
seem to run applications with a controlling TTY unless it itself was
started with one, and doesn't set QT_LOGGING_TO_CONSOLE to force log
console output either.
Task-number: QTBUG-66153
Change-Id: I775cb06953122a3f20c16bfe21e19de2d1aa5b52
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This way, it's lossless.
This commit is a cherry-pick of ab1e507574,
which was reverted.
[ChangeLog][QtCore][QVariant] Conversions of QDateTime to strings now
contain the millisecond components.
Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
AtSpiAdaptor::componentInterface was not checking the coordinate type in
GetAccessibleAtPoint.
Now, if the coordinate type is ATSPI_COORD_TYPE_WINDOW the coordinates of the
window will be added to the specified coordinates.
Change-Id: Iba571109a8da300f4141d616a94ef4ac87918f98
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
If the accessible description of a QLineEdit is requested and none has been
set, the placeholder text will be provided if one is available.
Change-Id: I4c0dad1d06fd3d8a6e00c963402d380c59bd7f05
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Passing on the thread ID is confusing, as it's not really what the
function does. The QNX code path can resolve the thread ID by itself.
Change-Id: I5f0d54621058576cdcf3707d36a11762fe2383c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
