Redoing 5704cbc462
This can't work, because the define comes from qconfig.h, not qmake.
Skipping initTestCase and cleanupTestCase when QT_NO_PRINTER is
defined.
Change-Id: I2527c018294b7518a4692f2c93da933848640b5d
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
This test checks the access permissions for '/etc/passwd', however the
filesystem on Blackberry is always read-only
Change-Id: I9299531397d4467287541b04184540ad6e2eae72
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Introduced by 2e0003eda4. We were
missing a attributesEmitted=true which caused the output from
toHtml() to sometimes be invalid when using pixel sizes to
specify the font size.
Task-number: QTBUG-25778
Change-Id: Ied61fcaef425a590d71c0b52292ac676cb88ba52
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Exclude printsupport tests from the build when QT_NO_PRINTER is
defined.
Change-Id: Iedae91666a599f4b77250abc8aac14c256fde34e
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run. We ignore the
line for this entry when comparing the two results.
Task-number: QTBUG-27171
Change-Id: I8978678295217edd537edb0d2c25260813aa3d93
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
QArrayData can point to data it does not own (cf. fromRawData()), which
shouldn't be modified. Not even upon destruction, as this data can live
in Read-Only memory or be otherwise shared outside the QArrayData realm.
Change-Id: I8bdf3050a17802fb003b77d5f543fe31769a7710
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Bring back code from 4.8 (Note that ALT-TAB is not received
as key event).
Task-number: QTBUG-27146
Change-Id: I6dd2e9c88fdc4c89d26dfaa8ab47deb2be451f25
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The simplePen property was not reset when reusing the QPrinter,
thus we would output two identical setPen() commands in the PDF
making the autotest that compares the results fail.
Task-number: QTBUG-27171
Change-Id: I601042ec59e45ef72a56f230f6112a91a259b4a5
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This test actually passes on Windows, so removing the QSKIP
Task-number: QTBUG-24543
Change-Id: Ic2666665f2882392aec92a665f51d6c5dd3355f8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This issue originates from https://bugs.webkit.org/show_bug.cgi?id=95736
Suppose we have
main.cpp
somedirectory/someheader.h -- which has #include "anotherheader.h"
anotherheader.h
With unix generator, the directory where main.cpp is located is included,
unless no_include_pwd is set. Hence the look-up of anotherheader.h from
within someheader.h will work.
With MSVC this works because MSVC looks "in the directories of any
previously opened include files in the reverse order in which they were
opened." (from http://msdn.microsoft.com/en-us/library/36k2cdd4.aspx)
Unfortunately the build breaks with MinGW, because it lacks support for
including the source directory in the include search path just like the
unix generator does.
This patch adds the same functionality to the MinGW generator as well as
an auto-test.
Change-Id: Iea8bb06e34862c51b8fd4eca2ee26668e24a319a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Replaced with qt-project.org test domain.
The connectToMultiIP auto test is still disabled due to lack of test infrastructure.
Task-number: QTBUG-23294
Change-Id: Icf01aabb0ae503291abdda4e8f773f8e0a08931a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I807b0e88ac71a0cb367fb4170cca8f2cb0ad43f3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Also fixing some includes and re-enabling the test
Change-Id: I4a061e106c2e55db39b8000729737a93e3d7714a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I5b75877ba192fa1357e67fee70dff7c0475991e8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ia30048e0c40967dc86a4e4ad26ac02ab67519096
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
According to Qt doc, "Network proxy is not used if the address used in
connectToHost(), bind() or listen() is equivalent to
QHostAddress::LocalHost or QHostAddress::LocalHostIPv6. This is not the
case in current implementation.
Change-Id: I6b8a40c1e8bd8aad9504d8f939b87eda6e93337c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test is now passing. Tested with intel compiler and vs2008.
Task-number: QTBUG-22285
Change-Id: I728919833d9bcbf71bef68c06baef92667ff074b
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test shows spurious failures in editingFinished() on some Mac
platforms (QTest::qWaitForWindowActive(testFocusWidget)).
This is apparently caused by the widget testFocusWidget (member
variable) interfering with the other tests widgets.
As it is used in one test only, instantiate it on the stack there.
Change-Id: I688cd21a2668d072660658302cf59197abe0b4d8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This reverts commit 6b5bbc531b.
Autograbbing mouse shouldn't be done in crossplatform code, as
X11 does this automatically. Windows needs platform specific
solution.
Task-number: QTBUG-26962
Task-number: QTBUG-27039
Task-number: QTBUG-23699
Change-Id: I911df92c4a34deb50b729f50681497046657948b
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When 2 (February) is entered as the month for (e.g.) 31/Jan/2000 (which
is following the format: "dd/MMM/yyyy"), the day is corrected to 29 but
displayed as its numerical value instead of its short (or long) name.
Task-number: QTBUG-27036 QTBUG-19091
Change-Id: I558ee13b224707d22b26c2ec2c045f96118bd5a1
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
When a QDateEdit has its display format set to "yyyy/MM/dd", its day
set to 31 and its month set to 2, it will display 291 as the day until
the cursor is moved or the focus changed. This is because
QDateTimeParser::parse calls sectionSize() for the day section, which
will sometimes return an incorrect size. There are also other display
formats affected by this bug (e.g. long day names).
For example, (in the context of sectionSize()) when text is
"2000/01/31" and displayText() is "2000/2/31", there is a difference
between displayText() and text - text is the previous value and
displayText() is the new value. The size difference is always due to
leading zeroes.
This patch makes QDateTimeParser keep track of the quantity of zeroes
added to each section and then factors this value into the result of
sectionSize() if there is a size difference between text and
displayText().
Task-number: QTBUG-26847
Change-Id: I3823cc41167ec920f742cb6a20d39fc5f433c915
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
The TRUE and FALSE macros are obsolete and should be replaced with
true and false (all lower case) respectively.
Change-Id: Iee352e8173500683e6319be0abbf5bacf29016e0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not compare a QString to QString(). Instead use the .isEmpty() method.
Change-Id: I8bb5e64563bf173abe7288bb9e35375bee1fe445
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise the containers might be forward declared in the moc file,
and when the moc file is compiled in a standalone translation unit,
the full definition of it would not be available. This results in
odd compile errors, so instead generate the includes if required.
Change-Id: Ie01c5a5d45314daad0b00dec03b3e1e18cdbae64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ie395d82d17710683968d006d22de313ef49dc6e5
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This overload avoids the needless heap allocation that the traditional
overload incurs due to the implicit QChar -> QString conversion
involved there.
In order to share the implementation between the two overloads,
QStringList_join now takes the separator as a (Char*,int) tuple
instead of as a QString.
Change-Id: I92961f13a3f19099de2a6e2df9f4789a12fc83a0
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fills the gap left by QWidgetStar, making the sequence
between FirstCoreType and LastCoreType contiguous, which some
benchmarks assume to be true anyway.
Change-Id: I2d5d202b6246a9065fdf77f325a4a04279dbe4b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can't have T& declared/registered as a metatype (wont compile), but
using it as type for a slot argument is possible. With the recent
introduction of metatype auto-registration we have to make sure that moc
doesn't attempt to auto-register those. Simple types are handled correctly
already, this fixes containers and smart pointers.
Change-Id: Id96857c57d6ebf158a67e9d527c89dc195473b1b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QStyle::standardIconImplementation() & layoutSpacingImplementation()
are removed, and standardIcon() & layoutSpacing() made pure virtual.
Change-Id: If8ab6cfef0b639b7973be22dd630ba3e6f39a225
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
The test has one unstable failure on Windows, so mark this with QEXPECT_FAIL
Task-number: QTBUG-26906
Change-Id: I2f6c63ddefecacd224d93f83e6951e961a02a051
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When calculating the maximum height / width which a QGraphicsView can display,
make sure we only take the scrollbars' dimensions into account if their policy
is set to Qt::ScrollBarAsNeeded:
- if the policy is set to Qt::ScrollBarAlwaysOff, the scrollbar will not be
displayed at all
- if the policy is set to Qt::ScrollBarAlwaysOn, the scrollbar's dimensions
have already been substracted from the available space by
QAbstractScrollArea::maximumViewportSize()
Task-number: QTBUG-14711
Change-Id: If5d24b41dbe7b089abca2bf61ccbd370d4de79a1
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Try to find a target widget that accepts drops; ignore the event
if none can be found. Split the handleDrag*() functions
to reduce indentation.
Add an autotest.
Task-number: QTBUG-22987
Change-Id: I516ac5f0c002caaf83c52ac16f821246e565230f
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Doing element-wise insertions for the full range of the test made
testing under valgrind extremely slow. When a reallocation is detected
we now resize() the container close to capacity(), while verifying this
doesn't unnecessarily re-allocate either.
Change-Id: Idf7015cf390e366fe444e7ca14c904a2d54ff48b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow-up to 83c9ebbd66.
Consider the case where calls to the reset methods on the same object
are nested as in the following sequence:
1. beginResetModel()
2. beginResetModel()
3. endResetModel()
4. endResetModel()
In such cases, only the outermost calls, i.e., 1) and 4), should emit
signals.
After 83c9ebbd66, 1) and 3) emitted the
signals, which is wrong. This is corrected by keeping track of the
nesting level.
Such sequences can come about when a base class calls the begin/end
methods between the calls made by the subclass.
QSqlTableModel::select() is an example of this.
Test included.
Change-Id: Ia62b45cb1abaab00a32bb8357de4a958bcff83e5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
After setting the printer name the initialization is no longer done for
a printer with a name. Instead doReinit() method is called to preserve
the orientation (set with setOrientation() method before calling
setPrinterName()). Before the orientation was changed back to default
when setPrinterName() method was called ignoring the orientation set.
Updated also the autotest because the case:
taskQTBUG4497_reusePrinterOnDifferentFiles() is no longer expected to
fail on Windows.
Task-number: QTBUG-26008
Change-Id: Ia6bc9ae14d79a646e61bfc97652f9f5af90738b3
Reviewed-by: Andy Shaw
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Both insert and replace have this overload, so one reason to add it
to append(), too, is consistency. But I can also make good use of
this overload in the the new QStringList::join(QChar) overload, so
it's actually useful in its own right.
Change-Id: Iccd48f9cb84831399e4db7e3e78eba25c0ced30d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you had a QTreeView with expandable items, if you tried to expand and while
the animation was still running you'd try to collpase the node,
the display would be completely broken: the items below that items would
not be visible any more except for a fraction of a second when expanding
or collapsing it again.
The problem is in the fact that when starting an animation the QTreeView
stores the state before animating. And it does that even if an animation
is already running. So the stateBeforeAnimation becomes AnimatingState and
when the animation finishes, AnimatingState is the state that is restored
breaking the painting.
Unit test is included.
Change-Id: I015212c1ed8962e6df705655099a5660f195caf3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
Add SslProtocol enums TlsV1_1 and TlsV1_2 and use the appropriate OpenSSL
methods when they're selected (TLSv1_1_client_method, TLSv1_2_client_method,
TLSv1_1_server_method and TLSv1_2_server_method). This allows us to
explicitly use TLS 1.1 or 1.2.
Task-number: QTBUG-26866
Change-Id: I159da548546fa746c20e9e96bc0e5b785e4e761b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This function only makes sense on a developer build. In non
developer-builds you get:
tst_qtextboundaryfinder.cpp:116:13:
warning: ‘void generateDataFromFile(const QString&)’
defined but not used [-Wunused-function]
Change-Id: Id1bda2d27b00048f7401606959b566a59c05b38d
Reviewed-by: Toby Tomkins <tjtomkins@gmail.com>
If setQObjectShared crashes because a QObject is tracked by two
different QSharedPointers, we lose the debug feature offered by #defining
QT_SHAREDPOINTER_TRACK_POINTERS, as the check done by this define
happens after the setQObjectShared call.
Therefore, move setQObjectShared after the internalSafetyCheckAdd call.
This is actually a noop change in 5.0, as setQObjectShared does nothing.
However it prevents a bug in case the Qt 4 behaviour is brought back
in some later version.
Change-Id: I71340d0f878828354537762d01c46d441efc918c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This works similarly to the automatic registration for Q_PROPERTY types,
but in this case it mostly affects the need for users to
call qRegisterMetaType<T>() before using queued connections
with methods using non-built-in metatypes, or before using invokeMethod
manually.
Change-Id: Ib17d0606b77b0130624b6a88b57c36d26e97d12d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
In Qt 4, the user needs to call qRegisterMetaType if the property
could otherwise be read before the type is registered with the metatype
system. This patch makes that unnecessary and automatic by registering
it when the first read indicates that it is not yet registered instead
or when QMetaProperty::userType is called before it is registered.
The types which are automatically registered exclude the built-in
types, which do not need to be registered, and include metatypes which
are automatically declared, such as pointers to QObject derived types
and containers of existing metatypes.
Change-Id: I0a06d8efdcb64121618e2378366d0142fa0771f5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
In Qt 5, when streaming an invalid QDate using a QDataStream version
earlier than Qt_5_0, QDate.jd is written and read as 0, which is an
invalid julian day for Qt versions earlier than 5.0. For Qt 5.0
however, 0 is a valid julian day, so when comparing a deserialised
invalid date (read using a QDataStream version < Qt_5_0) against a
default-constructed invalid date, they won't compare equal when they
should.
Task-number: QTBUG-26989
Change-Id: Ia76df493471f3b068c7d7187be20e3178eff2cc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change d060b6f04f introduced some
new properties to QTextFormat which were unfinished and did not
match the documentation in the same change. I've updated the API
and docs to use the regular QFont enum for letter spacing type
instead of introducing bools (which inhibits expansions later)
or mutually exclusive properties in the text format.
Change-Id: Ife44993b6746c413e421fdaf92ebaaab6ba95977
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The Qt::KeypadModifier modifier is internally masked away from all
shortcuts. So it is not possible to set a keypad only shortcut.
Changed the implementation so that first a full keysequence match is
searched. Then if no match is found the same sequence is tried
without the keypad modifer.
Added a autotest for this also to cover the basic use cases relating
to this.
Task-number: QTBUG-20191
Change-Id: Ibe7740c705fd0ab1eece4809b9a0b48882172933
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
While writing the test, I found that moc doesn't yet support
volatile slots. I left the tests in, commented, for a time
when it does.
Change-Id: Ib5fa00b25600618aedcc66739630054f3c879b99
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This only works with the C++11 contextual keyword
directly, the MSVC equivalent 'sealed', or the Qt
define for it.
While this isn't a problem for syncqt, being an
internal tool, moc should eventually be able to parse
user code using local C++11-final-wrapping macros.
For this, I guess moc would have to be taught to
expand macros in code and not just test #if clauses,
potentially driven by something like
#pragma qt-moc expand-this
#define MY_FINAL_CLASS final
but that's something for someone more intimately
familiar with moc's source than I am.
Change-Id: Id6aec961a881e8d5a9b76a7fc8e1c02c71913f64
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This detected the same missing detach()s in QUrl::resolve.
Everything else works, no need for a mutex in Qt5's QUrl.
Change-Id: I0da51b7b0c6b810d314a26d4b638383cd17de12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextEdit showing long lines using lots of text format (for example
with a syntax highlighter) used to expose a quadratic behaviour which
make it impossible to edit files with long lines.
It was fiexed in the few previous commit
Task-number: QTBUG-8389
Change-Id: Ib7203497a7699a85ae1dfb70fe65d5fb36884b58
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Just to make it clear which two sections go together.
Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Introduced during Qt5 development and renamed to QInputMethod.
Change-Id: If6744648dc98b779e65c449ae32626db574181df
Reviewed-by: Joona Petrell <joona.petrell@gmail.com>
availableMibs() unconditionally adds 2107 to the list of mibs. The patch
ensures that codecForMib() also knows about this special TSCII codec.
(Note that the autotest only really checks this code path if only this
test case is run. The other tests already fill the internal codec cache
otherwise).
Change-Id: Id987d7cecd5f5700cca75e9b85b37011f8e5c622
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
@p replaced by \a, \QD replaced by {Qt Designer}, couple of enums etc.
Change-Id: I315510690bf52e42db519292b4122fa24c73bbc9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Task-number: QTBUG-26540
Change-Id: I1c365aeb013f5ddedd0589aa4c4844be759a3882
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They used to always return indexes in column 0.
Change-Id: I2cf4239e0a975b37548de00a1deb916fcd88b4c7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Commit 7808ec79 changes QApplication to synthesize
mouse events from (unhandled) touch events.
On Mac OS X this creates a conflict for two-finger
scroll swipes, which generates both touch events and
mouse wheel events: scrolling in QTextEdit will also
select the text.
Add a SynthesizeMouseFromTouchEvents platform style
hint that enables the event synthesising. Set to true
by default and false in Cocoa.
Change-Id: I1ffa5a141476aa38b81ce92a87eff676c7ec2276
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Size constraints set on a widget before the creation of
the QWidgetWindow were lost (for example, Qt Creator's
preference page).
Task-number: QTBUG-26745
Change-Id: I7c2f5aed9c8817795603e5ad3c24418d66627bab
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <qthjk@ovi.com>
"The documentation states that "secsTo() does not take into account any
milliseconds", however, this is not the case. Given times 12:30:01.500
and 12:30:02.400 secsTo returns 0. If milliseconds are not taken into
account, I would expect this to return 1 (i.e. interprets the times as
12:30:01 and 12:30:02 thus truncating the milliseconds)."
Note that tests were also written for QDateTime::secsTo(), as it uses
QTime::secsTo internally. This addresses Javier's issue in the
comments of QTBUG-9304.
Task-number: QTBUG-9304
Change-Id: I9efe0c8f710db859c1d086d67ba3e5b349a56c4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime currently serialises its private Spec enum. If a user was to
deserialise the individual components of a QDateTime separately, the
resulting timeSpec may be invalid when cast to the Qt::TimeSpec enum.
E.g.:
QDateTime dateTime(QDate(2012, 8, 14), QTime(8, 0, 0), Qt::UTC);
// ... serialise
// ... deserialise date, time, spec separately.
// spec == 2, the value of QDateTimePrivate::UTC.
// spec != UTC, will be set to LocalUnknown.
QDateTime deserialised(date, time, spec);
This patch serialises QDateTime objects in UTC and the value of
timeSpec() as opposed to QDateTimePrivate's spec. This changes the
serialisation behaviour of QDateTime for version 13 of QDataStream.
Task-number: QTBUG-4057
Change-Id: If650e7960dca7b6ab44b8233410a6369c41df73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The asymmetry is intentional: the getters can use toLatin1() because the
called functions, with a QUrl::FullyEncoded parameter, return ASCII
only. This gives a small performance improvement over the need to run
the UTF-8 encoder.
However, the data passed to setters could contain non-ASCII binary data,
in addition to the percent-encoded data. We can't use fromUtf8 because
it's binary and we can't use toPercentEncoded because it already encoded.
Change-Id: I5ecdb49be5af51ac86fd9764eb3a6aa96385f512
Reviewed-by: David Faure <faure@kde.org>
Just in case someone (like me) changes the function signatures or adds
new functions.
Change-Id: I1025fea012d95ffe89acaf799aa58fd2b0babc80
Reviewed-by: David Faure <faure@kde.org>
Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Task-number: QTBUG-21804
Change-Id: I475166f3f60b1278089baa255ace4e18baeb568e
Reviewed-by: Jani Honkonen <jani.honkonen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When a stylesheet was set on a parent widget then in some cases it would
not get applied to all the child widgets. This was because the order of
the children list may have been modified while it was being set on
children. By making a copy of the list we prevent this from being a
problem.
Task-number: QTBUG-26321
Change-Id: Iea6bf72c69a0c39746f7ef5e7893dda5a93ed7e5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The listitem width was calculated incorrectly because spacing was
not considered. This fixes the second part of the reported bug where
spacing is set. Added some tests to catch the issue relating to the
reported bug.
Also added a test to check spacing in general.
Task-number: QTBUG-21804
Change-Id: Icc6326bce914264d882a60a9fc0ebe7d2a08dbf6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the selected item is scrolled with keyboard keys the selected item
will go outside the visible area. The scrolling did not take hidden
items into account when calculating the amount to be scrolled.
Task-number: QTBUG-21804
Change-Id: I63da0248cec43be464898f9dc8167e739f00ccd0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix for this failing test is not yet agreed to. Disable it to
allow progress with the CI system while the fix is decided.
Task-number: QTBUG-26869
Change-Id: Ia8089b8e66d750353e7c1c69597916af0d042856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qUncompressCorruptedData() no longer hangs on QNX 650 and Blackberry OS
sytems.
Change-Id: Id131f9f1c6dcd358c152675c7e29ab937052c1d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
main.cpp:165:60: warning: ‘type’ may be used uninitialized in this function [-Wmaybe-uninitialized]
app.arguments().at(3).toInt());
^
Change-Id: Ib0f6847031437b588e14c6708fdddea5fd474b58
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The bug is that the connection to emit that signal can be made
obsolete if the connection is made too early and the model is replaced.
In the bug report, the connection is made by calling view() early (thereby
causing the creation of a view and a QItemSelectionModel which operates on
the built-in QItemSelectionModel, and then connecting to that
QItemSelectionModel), and then when QComboBox::setModel() is called later
the built-in view creates a new QItemSelectionModel for it. The bug was
that that new QItemSelectionModel is not connected to. This patch fixes that
bug.
Task-number: QTBUG-4454
Change-Id: Ibbdb8731f16ab071008b4a19dc2cc7ae03cebc84
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There are some security issues with undo/redo. User should not be
able to get the erased password back in any situation. Therefore
redo must be disabled completely and undo is limited only for erasing
previously entered text.
Task-number: QTBUG-14226
Change-Id: I2b38aca84adbad1c14db76b56ad6303d56b35b4d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26687
Change-Id: Iaa0197efe64c61505e22e4a63a1f5c012af0bc78
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
src/testlib/qtestmouse.h:219:67: warning: ‘popupMenu’ may be used uninitialized in this function [-Wmaybe-uninitialized]
{ mouseEvent(MouseClick, widget, button, stateKey, pos, delay); }
tests/auto/widgets/widgets/qtoolbar/tst_qtoolbar.cpp:862:12: note: ‘popupMenu’ was declared here
Change-Id: I19cfd1790fbd948e97bf740d4412ccf3bb98a330
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
