This only updates data on languages already present in 5.12; once it
has merged up to dev, the scripts need to be run again to pick up a
few more languages and possibly add any more new languages present in
v34. Change some tests to match changes in en_AU's abbreviated day
and month names.
[ChangeLog][ThirdParty][CLDR] Update locale data to CLDR v34.
Task-number: QTBUG-71144
Change-Id: I68402b5e7e9d3dba669b8ba31b9a8abd86675c6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Otherwise, the rects will pile up when the item is not part of a view.
Task-number: QTBUG-54275
Change-Id: I29c989e25ce0ca1ac0b87d0388a476ef1acd9cfd
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
As the test was unstable, we qskip the failing parts
instead of mark the whole test insignificant.
Task-number: QTBUG-50842
Change-Id: Ib8f5b7ead07d65cc624fa72b190ecee0338c8183
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
tst_QMdiSubWindow::setOpaqueResizeAndMove checks if a resize of the mdi
subwindow works as expected by simulating mouse events. Those events are
sent to fast and therefore the operationMap of QMdiSubWindowPrivate is
not yet updated which let the test fail. There was already a call to
qWait(250) to wait for the 200ms timer but sometimes (esp. in virtual
environments) the timer was not triggered after this period.
Fix it by checking if resizeTimerId is set back to -1 which means that
updateDirtyRegions() was called.
Change-Id: I961ba80589d2f725a6858ba70b84fb35750a6964
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
tst_QItemView::indexAt() was disabled since Qt 5.0 (and maybe earlier)
maybe due to it's long runtime (15s on my machine).
Speed it up by checking only some special positions inside the visual
rect (borders, center) as it will likely not fail on other positions but
succeed for the ones which get tested.
Task-number: QTBUG-22470
Change-Id: I5c7135757049176f9daca4afc1b7f40c75b9ecd9
Reviewed-by: David Faure <david.faure@kdab.com>
When the first row(s) of a QTableView is hidden, PageUp could not reach
the first visible row because logicalRow(0) is taken without checking
if the row is visible.
Task-number: QTBUG-70215
Change-Id: Ic7820352b8988accb685ea7d16908d3fa8bf2847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
For ControlType != QSizePolicy::DefaultType, qCountTrailingZeroBits()
is used which, MSVC 15.8.1 does not consider constexpr due to built-ins.
Exclude the check by #ifdef.
Task-number: QTBUG-69983
Change-Id: Ifc3dc3d94a804246bee1705fc8f3ac9b04ee4d32
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test had some shortcomings:
- Flakyness due to not waiting for the file dialog list
to be populated.
- It assumed that the hardcoded directory name
____aaaa... always would show first in the list. This may
not be true on Windows, where names like .designer show above.
- On failure, the test directory would leak.
This manifested in failures like:
FAIL! : tst_QFiledialog::clearLineEdit() '(fd.directory().absolutePath() != QDir::home().absolutePath())' returned FALSE. ()
To fix this, use QTemporaryDir and introduce predicates that
can be used to check whether the dialog has been populated
and the right file/directory is selected by pressing cursor down.
Use the temporary directory as not to pollute the home directory.
Change-Id: Ic504b91325993dcd6099c99e125e7ed8ff1d7672
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
Under certain circumstances, if you had a widget with a QOpenGLPaintEngine,
and drew QStaticText into this, and then later had Qt Quick access the same
cache and try to resize it, we would get a crash because the resize function
would have a pointer to the paint engine and try to access its shader manager
(which would now be null, since this is outside the begin()/end() phase of the
paint engine.
The solution is to reset the paint engine pointer to null on the cache once it
has been populated and it is no longer needed.
[ChangeLog][QtGui][Text] Fixed a possible crash when combining QStaticText,
QOpenGLWidget and Qt Quick in the same application.
Task-number: QTBUG-70096
Change-Id: I7383ad7456d1a72499cfcd2da09a5a808d4b3eff
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fails on previous 42.3 and also 15.0. Just covering "opensuse" saves
us from new commits every time we upgrade our openSUSE. We have a bug
open of it after all.
Task-number: QTBUG-51399
Change-Id: I5c0869daea41b1886faba3d0caaa0804a3705d54
Reviewed-by: Liang Qi <liang.qi@qt.io>
Frameless obscured windows do not receive WM_PAINT/expose events on
Windows. Qt::WA_Mapped needs to be set on them to ensure updating works.
Task-number: QTBUG-39220
Task-number: QTBUG-52039
Task-number: QTBUG-58575
Task-number: QTBUG-63927
Change-Id: Ic6c11f2be96378b6a6b61296f1f3e13cd49b50a6
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
I've tried to reproduce the failures in the CI a couple of times now,
but it keeps passing. Let's leave some debug output in the test so
that if/when it does fail, we might know a bit more about why it does
so.
Task-number: QTBUG-69492
Change-Id: I5b39ac692e9026ce4b25cd13d342b11e061b777b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Nathan Collins <nathan.collins@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QMessageBox window ignores QCloseEvent if it was created
with Ok button and the detailed text was set. But it can
be closed if it contains only one button.
Make it closable if there are two buttons and one of them
is the "Show Details..." button.
[ChangeLog][QtWidgets][QMessageBox] A message box with two
buttons, one of which is the "Show Details..." button,
can be closed by clicking the X button on the window's
title bar.
Task-number: QTBUG-69526
Change-Id: Iba09e38561eb3898dc2aecfd38d8519d512a71c1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The QTRY_VERIFY was needed because the window doesn't initially have a handle,
and QTest::qWaitForWindowActive(QWidget *) only checks the active state of the
widget if it does, returning false if not.
This broken logic should be fixed, but for now let's make it clear what's
actually going on by using an explicit wait for the window handle.
Change-Id: I6dd89e0894efed14f4b9a2562dfe8ca76b5ef89c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test was un-blacklisted in 4050ee6ac7
but apparently it is still not stable.
Task-number: QTBUG-69666
Change-Id: Iaf933ee27d54ebbfa52d0a8d7b1def0ca91808e7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's useful to know how many times the signal was emitted, because it
gives us insight into why the test may have failed, especially when
it's difficult to reproduce.
Task-number: QTBUG-69492
Change-Id: I94796ed880512b060e0a724c87edde8c3b91bb7c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests could change this property, and since the majority of the tests
share testWidget instead of creating local instances, we should be
thorough when cleaning up.
Change-Id: I6039fb6857f4f788f809b1d1fd491b4ef34923ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The majority of the test reuses testWidget. While this may be faster
than creating a QDateTimeEdit instance on the stack for each test,
it introduces issues when certain properties aren't unset when cleaning
up. This happens easily when new tests are introduced which rely on
certain properties, for example.
Rather than making the newly introduced step-modifier-related tests
use testWidget, this patch goes with the simpler option of hiding
testWidget, just like other tests currently do.
Eventually we should probably switch to using local instances
everywhere.
Task-number: QTBUG-69492
Change-Id: I4d5625be0b7c72db793346f43fe3a7e7c1241f13
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By making the test independent of fixed top level widget sizes, it can
also be run on platforms, that do not support this feature.
Task-number: QTBUG-68297
Change-Id: I6945d259801360a9819b9b631d0a7497d3d27a9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The min/max section size was not checked when setting the default
section size. This was an oversight when the check for min/max section
size was added to resizeSection().
[ChangeLog][QtWidgets][QHeaderView] setDefaultSectionSize() now
checks if the given value is inside min/max section size
Task-number: QTBUG-69431
Change-Id: I1b5704282927ce5a8520f52174ebf91d9840bc8a
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Visual Studio complained about the usage of a potentially uninitialized
variable which made compilation fail.
Change-Id: I0bc9d1e47d3b00b047912164c3bc4197a2058f85
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-68864
Change-Id: I799defcec3a41d86a604bfcd4c2e1081ae4e0e53
Reviewed-by: Simo Fält <simo.falt@qt.io>
