It prints the warning even if we surround the affected code with
QT_WARNING_DISABLE_GCC("-Wstringop-overflow") (see e4eaa62943),
so we have no alternative other than to disable the warning completely.
Change-Id: Ia3e896da908f42939148fffd14c488c4006040e6
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use Qt's flags instead of WS_DLGFRAME which matches WS_CAPTION as
well (WS_BORDER | WS_DLGFRAME).
Amends 886ce572d6.
Task-number: QTBUG-58959
Change-Id: Ifdc106667d67cc6f5d3611806aae1035742fb882
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fixes dubious lock protecting the platform interface handle, and makes
sure that we lock and hold a valid reference to the platform
interface before accessing it. Since the platform interface is exposed
we also need to expose the mutex protecting it.
Change-Id: I1ec1219a75c589bc793676369b11fb403de20102
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The code was trying to open a local file with the same path
as the remote URL, which is unnecessary and wrong in the unlikely
case where such a file would exist.
Spotted by Christoph Feck when reading the code.
Change-Id: I1d77e5781cf606b025d2877f48a9914dd1e36b1d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This provides a helper function which does the check on the string.
QFileInfo::isRoot() in addition checks for the existence of
the directory, which can cause hangs with network drives.
Use the new function in appropriate places in QtWidgets.
Task-number: QTBUG-6039
Change-Id: I54d0d860713e82b28fa4069a5345b042337f9c52
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They don't have any meaning, seems like they were meant for a future
extension. Documenting them, documents that they need to be escaped.
Change-Id: I90079766ffd45fab8c4676f7a9212ff6dec4a732
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
And remove the corresponding defines.
Note that XCB_USE_GLX and XCB_HAS_XCB_GLX were used as synonyms
because QGLXBufferSwapComplete was wrapped in #if defined(XCB_USE_GLX)
and at the same time it was used only when XCB_HAS_XCB_GLX
was defined.
Change-Id: I6c04b0ccfd5369b78b3e8af2ec39d38ae5c311dc
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Documentation does not match the sample code. There is no explicit
call to QWindow::create(). It is called implicitly by QWindow::show().
Furthermore, QWindow::create() documentation states: "Note that it is
not usually necessary to call this function directly, as it will be
implicitly called by show(), setVisible(), and other functions that
require access to the platform resources.".
Change-Id: I632da86438f7f88c1fd8359b9fd6d52f329291cb
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
We're only supporting builds with MinGW-w64 these days.
Change-Id: I1198551ba85132c3f0f81e32f11aa149126ca61f
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
When the switching to the non-simple offline style is done after
document load, the navigation to anchors completely breaks. So, do
the switch without the additional delay.
Task-number: QTCREATORBUG-18448
Change-Id: I5abbc3bbe1c743d2a5e493bb9e0916c5d092942a
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
To make it more reliable and efficient we now do the reverse of what we
are doing when redirecting the items. This will ensure that the actions
are correctly reset to the original target and action. The original
approach of updateMenubarImmediately() was not always doing this and it
also does other unnecessary things as a result when all we need is to
just reset the things we changed.
Change-Id: Icefa38d47ec9434894f05caeed75fbf8bdfecb93
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
References to these screenshots have been removed from the
docs in other commits.
Change-Id: I1af72f0160382f1fe98740c664258a9b35ca0e64
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Building qtbase 5.9.1 on Linux always results in a build with
accessibility support disabled.
The problem is that the config option for accessibility-atspi-bridge
checks for config.atspi, which isn't defined anywhere - it should
check for libs.atspi (which is set if pkg-config finds atspi-2) instead.
[ChangeLog][QtGui][Platform Specific Changes][Linux/XCB]
Fixed detection of AT-SPI, allowing accessibility support to be built
again.
Task-number: QTBUG-61731
Change-Id: If3bd5dfccda40158c566f8507e34b6877b59b6fb
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Bernhard Rosenkränzer <bero@lindev.ch>
Reads the v4 and v5 info-header together with the rest of the info-
headers, and use that to report the correct image format before
decoding.
Change-Id: I69e2bcc54367b7f14820815ae2ae1fa2d8d5dc8c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
By reverting ANGLE change d3b84ab51db09de238459b0dff2e8420c09aabf3
we get rid of the flickering that happens on resize when D3D9 is
used. The issue that was fixed there is not relevant in Qt's
context so it is safe to revert the change.
Task-number: QTBUG-59893
Change-Id: I9306314b892612fbd1f7a058a2e606aedc0367bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
System headers like tchar.h need the _UNICODE define, not UNICODE.
While qplatformdefs.h already provides _UNICODE when UNICODE is
defined, users might want to include tchar.h without Qt includes.
This is consistent with Visual Studio's default defines.
Task-number: QTBUG-61411
Change-Id: I2f604368080270d840f0dbb2cf273805d2ba5239
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The strings in Windows VersionInformation resources should be
capitalized by convention, and the entries are usually not terminated
by a dot. However, "Ltd." is an abbreviation and should be
dot-terminated.
Change-Id: Ibea3443ac38846e29a3e77ab3e8d5d77b9370272
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This creates a VersionInfo resource on Windows for Qt's tool
executables similar to what Qt's DLLs contain.
Task-number: QTBUG-55755
Change-Id: I9e5d7bedaec9d14f29a9eeeb6697b07241f860d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Any version prior to 2015 is not supported anymore.
Change-Id: I9ccc87fc506521b560fda1b4c88f9c3aebd7a485
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Introduce uap3 namespace which is used for newly introduced
capabilities. In addition, the autodetection of namespaces for
capabilities within the uap namespace is disabled in Visual Studio
lately. Hence, the output needs to be more verbose including the
namespace for a capability.
Task-number: QTBUG-60899
Change-Id: Ia1ccf825d4c257d2661e34c195c45fd37e0b6413
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
A deadline timer is more correct for timeouts.
Also starts the timer before trying to acquire the mutex for more
precise timeouts.
Task-number: QTBUG-58745
Change-Id: I230266a3a5d7b7af33981efed4e6882e5727a41c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
uikit/sdk.prf replaces QMAKE_MAC_SDK_PATH with a make expansion of that
variable, which of course does not work when we use the contents
directly.
amends 6d5489f5d.
Task-number: QTBUG-61690
Change-Id: Id77dff8ee7d737dd35f74cc7d39faaa50b4b1ab9
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Fix one #include as only QCompleter is used and not QFSCompleter.
Change-Id: Ia1e722122f7e322c678d2db6962c6086c684ddd9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A visibile QOpenGLWidget receives a QEvent::WindowChangeInternal which triggers
a QOpenGLWidget::reset(). A hidden QOpenGLWidget never received this event
so it was never reset, resulting in a black rendering.
Includes unit-test that fails without this patch.
Change-Id: I9d2c57d66fa629f631a9829a5ebf4de09998ad75
Task-Id: QTBUG-60896
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
If an application proxy has been set or the usage of the system proxy
configuration has been turned off then these should be respected rather
than querying the system for the proxy. By using proxyForQuery() over
systemProxyForQuery() it ensures that it first checks if there is an
application proxy set before falling back to the system proxy, if using
the system proxy has not been turned off.
Task-number: QTBUG-61692
Change-Id: I65ed3e6bd7b3449cd4ae3757e583aa8d7724221b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
