When the exampledirs qdocconf variable is . the first 2 characters of
the file to quote from were being cut off, since there was a string
comparison between the size of the strings with and without './'
Change-Id: Iede54b5f77ec8a7530c608908f08e7eb4351f0f1
Reviewed-by: Martin Smith <martin.smith@nokia.com>
After we have change the policy we should set the readbuffersize to
unlimited again, so that we try to download all data.
Change-Id: I1b9bdb6c2e5f408c920f6e6d7e85a39e4c18316b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Added the setReadBufferSize functionallity again by limiting the
amount that the delegate read from the channel. Each time that data is
fetched from the reply buffer, we communicate back to the thread so
that more data can be fetched.
Task-number: QTBUG-25327
Change-Id: I2f9950196e64acd09bc8da50c1116f2c9deacad4
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMAKE_RPATHDIR, QT_LIBINFIX and QT_NAMESPACE were previously set in
qmodule.pri on Windows, and qconfig.pri on platforms other than Windows.
Make the behavior consistent, move them to qconfig.pri.
qconfig.pri is the correct file because these variables need to be
visible for _all_ users of Qt, and not only the other Qt modules (the
ones who load qmodule.pri).
Change-Id: I4d517488a80b134a78ebde8d3196bdab3c3ab991
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
since the entire range of a valid unicode code points is in use, QHash
is suboptimal and could be replaced with QList;
taking the value by ref and not inserting it back to the map + not calculating
the default value over and over gains us up to 60% performance boost!
Change-Id: I48c54a8e88472cf76c79c0aac44e65eeefa44861
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
error: logical 'or' of collectively exhaustive tests is always true
[-Werror=logical-op]
Indeed these asserts do not test anything, given that MouseButtonMask is
0xffffffff
Change-Id: I33cf59d3e77d9c644fc307de36f4e0ab1bea80f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Http proxy cannot support server sockets or udp sockets, so don't
offer it as the system proxy (in the generic environment variables
implementation)
Change-Id: I234ab1024952b2630e668ddc35c665efade8e2b9
Reviewed-by: Adrien Bustany <adrien@bustany.org>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Ensure comma between elements (757 missing), single space and curly-
braces around title elements, etc.
Change-Id: Id16c3fda7fc47a12a0682f8720214f4990609a97
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
- Adds support for doing NTLMv2 integrated authentication via logged in
users domain credentials using the Windows SSPI api.
Task-number: QTBUG-17332
Change-Id: I4e840f7fb54ce1ace8a6151868f59f413d232295
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The only use for storing charset loaded by fontconfig in font engines
is for determine if a font supports certain codepoint, however FreeType
already does that. The charset loaded is sometimes not complete, for
instance in fontconfig 2.9.0 it removed Apple Roman platform support
for cmap loading, thus results a regression in common symbol fonts
(Wingdings, Webdings) rendering. Because those symbol fonts produced
by Monotype only contain two cmap tables: Apple Roman and Microsoft
Symbol, since the Microsoft Symbol table has a weird 0xF000 offset,
we always fallback to the Apple Roman cmap table.
Removing freetype charset cache also make each font engine consuming
less memory.
Change-Id: I88f3f44981f3a1c517b84809a3f5b834ffff7681
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Add some more of the prefix options that are
already implemented to the usage information.
Change-Id: I89ee37ebc6deee8b6a5fd5a1c16d26ae3ead1f30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This changes all the containers that uses QtPrivate::RefCount
(QMap already had one), and QVariant
In Qt 4.8, it was pointless to have the move constructor because we did
not have quick way to re-initialize a null container. (shared_null still
needed to be refcounted)
But now that we have RefCount, and that the shared_null do not have
reference count, we can implement a fast move constructor that do not generate
code to increment the reference count.
Change-Id: I2bc3c6ae96983f08aa7b1c7cb98d44a89255160b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This commit matches the previous documentation commit that says that
the conversions are applied using to/fromUtf8.
Change-Id: I304e4d866ddedac5094fef8500cbeba299a02cb5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This cmake function handles all of the necessary logic for using the
include directories of Qt modules, linking to Qt modules, adding
the required definitions, and most importantly, adding the position
independent flags required on UNIX systems to use Qt by default.
The function relies on functionality available in CMake 2.8.8, so it
is only available if that version of CMake or greater is used.
Change-Id: Ibe698e06819129479348c240844264c41553b5fb
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Use new objectNameChanged() signal.
Change-Id: I247566bd51d23ec65ff74ba9ac7be0d18e8ff160
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Made opengl optional.
Made Clipboard and Accessability optional.
Moved internal mime data into its on source file,
was implemented in the clipboard source
which is just strange.
Change-Id: I6ddf0c656533bd45e22e24492fc2254d15b7822f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Change-Id: I4c70ed2808396931fff986fbfad5940dd39e74f6
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I9f0e9316241b4cb615350876b11ee263f7efd3bf
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Use inline functions, instead of defines for global
functions. As the defines will break member functions
that have the same name. As inline functions are only
available for C++, just define them for C++. This will
only effect 3rd party dependencies, but they don't need
them anyhow.
Change-Id: I929562401e03f08b068edba107a3f67a585952a2
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
A leading byte order mark is valid in utf-8 and we should
parse documents starting with those correctly.
Change-Id: Id85398ff6e05b93ceefbaf4a6de5571d5e61ca13
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Also removed a few useless comments.
Change-Id: I62a52bb826c1299ea9da3f0f3c23f267703c6509
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
qatomic_msvc.h declares some Windows intrinsic functions which should
not be in the Qt namespace.
Change-Id: I1b2f91798159c08cf167ee3d1ed2818c12c9b833
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
No shaping rectangles means no interaction with the window
The shaping rectangles are based on the window coords, so need to substract the window coords when checking for the point
Change-Id: Ic9004a8ec0f447cddcd1b4324d9fd60a94787cb9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
When a page exists in more than one file,
qdoc was reporting this sometimes without
reference to the locations of the files.
This has now been fixed.
Change-Id: I0697acc170b94a74b15fb384556dd76f764f7792
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
there are several reasons to do this:
* text breaking is not a shaper's job;
* since the text breaking rules are bound to a specific Unicode version,
updating Qt's internal unicode data would require updating the data in HB as well;
* makes porting to HurfBuzz-NG some easier
Change-Id: I0bbf8e8a343bc074696f4ddf2ae4e7fa32a61629
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
in order to reduce code duplication and prepare the ground for upcoming changes
Change-Id: I980244149f65384c9484bbec4682de8b7b848b08
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Leads to parse errors, and we don't really put copyrights into these
files anyways.
Change-Id: I4b423b3f4f5c4f1f5051d8e3613133c4f1df342a
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This function isn't really needed. The QDialogPrivate destructor deletes
the platform helper, so the QDialog destructor does not need to do it.
Subclasses of QPlatformDialogHelper are now responsible for deleting any
native resources they create.
The one place in QFileDialog that needs to recreate the native dialog
can simply recreate the helper. QDialogPrivate::deleteNativeDialog() now
becomes QDialogPrivate::deletePlatformHelper(), which resets all state
to allow the platform helper to be recreated.
Change-Id: I58adfe8801e02e63b3cb4a9a3a0b8cb5b3c7b161
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove the _sys suffix from all members of QPlatformDialogHelper and its
subclasses. The QPlatform* class prefix already implies that these
methods are system specific, we don't need the method suffix as well.
Change-Id: I5ad1f928fab3a989992951acc244915e7fa48d32
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This was crashing because the ':' was found past the end of the
username, causing the recoder to run from position 22 to 11, via the
long way around the memory.
Change-Id: Ic1ae596f34f7db857fb4210294974fb5a6adf691
Reviewed-by: Alexis Menard <alexis.menard@openbossa.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The consequence of this was e.g. that it would be impossible to
set the capitalization of TextEdit elements (or Text elements
with RichText format) in QML.
Change-Id: Ie219fac7e4305efc59a4ac9da5b06c25ff3ac9ac
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Because SSL2 is disabled in ubuntu's openssl binaries, the SSL
connection is expected to succeed rather than fail when the server
side is using SSL3/TLS1.0.
Used the OPENSSL_NO_SSL2 macro to decide this.
Change-Id: I2c35aa5aa0c9432ae78000c81f70086bdc31843d
Reviewed-by: Richard J. Moore <rich@kde.org>
There is now an actual NOTIFY signal for this property, and the callback
is no longer necessary.
Change-Id: I664714e22e607c747f144250cfb78de8c1d28686
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
The files in this change were still in qtbase/doc/src or required for
it. qtbase/doc/src should now only contain example documentation and
images for the example documentation.
Change-Id: Ia7ca8e7fd2b316e77c706a08df71303bc8294213
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
1. For QML properties documented in a .qml file,
qdoc no longer prints the error message that it
can't detect whether the property is read-only.
2. For QML properties documented in .cpp files,
qdoc now includes the file path and line number,
when it prints the error that it can't detect
whether the property is read-only.
3. qdoc also includes the completely qualified
property name in the error messages described
in 2.
Change-Id: If88381783fd0f29271f579ae170a0a6f4b1a7344
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
generateQmlDesc was basically a copy of generateApiDesc. Just using
generateApiDesc also fixes a bug with the generation of a <shortDesc>
inside an <apiDesc>
Change-Id: I129a24ab0244283cc394c2afacc0f8227e4e5a88
Reviewed-by: Martin Smith <martin.smith@nokia.com>
