don't try to execute a binary from the install dir.
amends 8e776d39f.
Change-Id: I37990bc83b295379f0c93f4ca712e1bbf980fd44
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
A Q_OS_MAC ifdef was left from the days of macOS-only support.
Task-number: QTBUG-59956
Change-Id: Ia10258910ad14ecccee8f0ec22e53f9299a672ff
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The 16-bit multiplication can not handle the case where one of the
numbers is 65536, so skip it in that case as we do when the y remainder
triggers the same issue.
Task-number: QTBUG-62165
Change-Id: Iea2ebe557949797d9aa77b8d7cdac9247eea7b84
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Setting the clip needs to be followed by a call to
QPaintEnginePrivate::systemStateChanged() since the raster paint engine
overrides the function to set some variables.
Amends change 4ae1025c0b54a535ef9f50c6cdab5ef752b667dc.
Task-number: QTBUG-44067
Task-number: QTBUG-56282
Task-number: QTBUG-55698
Change-Id: I7983ddd087deb484d9dbbf955eb1d6f903ef59fe
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Scale velocity and raw positions as does
QWindowSystemInterfacePrivate::fromNativeTouchPoints().
Change-Id: I4c9e03e4c2f4ca807319b1a7d1f4a9e56a25b06c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Rewrite instantiation of QWindowsRemovableDriveListener to check
for the presence of the event dispatcher.
Task-number: QTBUG-62242
Change-Id: Ibb5726864058593e5341e0d411aaf5432e2f108a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The image appears to be 128x128. Fixes test failures
FAIL! : tst_QImageReader::readFromResources(rect.svg) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
.\tst_qimagereader.cpp(1493) : failure location
FAIL! : tst_QImageReader::readFromResources(rect.svgz) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
which likely do not show in the CI since the qtsvg module is not
available when checking only qtbase.
Change-Id: I84ebdde6f2251f56a00f16a54bd20d0c2b23638e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Availability of D3D11_QUERY_DATA_TIMESTAMP_DISJOINT depends on the used
MinGW version so that the check for MINGW is not sufficient. The newly
added configure test can be used for every toolset.
Task-number: QTBUG-57916
Change-Id: Ia9cb48f3e673841101a93cbc8ea23aff9547f639
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
only few tests remain, and many of these were mis-classified anyway.
Change-Id: Ic3bc96928a0c79fe77b9ec10e6508d4822f18df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
testing the non-xkb xcb parts is unnecessary, as we already did that
separately.
Change-Id: I452cc746315117a0169f0e0c764fe7e0229437e9
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
just use 'which' and be done with it. the script was rather arcane, and
worked around deficiencies of cygwin (no longer relevant) and solaris
(assumed to be somewhat sane meanwhile).
Change-Id: I2e11ea3c87ac06a85604ac8d58d8fee95eae2e15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
replace the custom QT_NO_STD_ATOMIC64 with a regular public feature, and
give libatomic an empty source rather than using a separate config test.
Change-Id: Iaf4a7f4c4874f61bf93aa58fe41843a86baf1ab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
libraries::journald is the actually used one.
Change-Id: I2da4ae106dd1041cdb269e05def93523ed5011b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
remove useless define and ifdef/error, and check for a more appropriate
function.
Change-Id: I1a1622cc157c49ebb6787068ade7b33e45e228ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
these would be caught by the central verifyspec test, if we even got
that far.
Change-Id: I3eda80c4614b94f869d907f0a40166f4914ea692
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- #error hack for MIPSpro compiler from unix/clock-*
- irix exclusions from unix/*iconv
- hpux defines from unix/{getifaddrs,ipv6ifname} (the obsolete
hpuxi-g++-64 spec would add them automatically anyway)
Change-Id: Ib227e5626c0e8c8f6faebf76c312d77955f80b92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
amends b4525b3407, which gives no indication for why this was done.
judging by other tests, it wasn't cargo-culted. i presume it was just
about disabling debug-and-release, and the debug choice was arbitrary.
the central system nowadays does the same, just that it uses release.
amends 1533bfc5fc, which certainly _was_ cargo-culted from the former.
as a side effect, this removes some other CONFIG manipulations which are
handled centrally or are wholly ineffective nowadays.
Change-Id: Ib9af2837925a2f19af05506e798a26d363635735
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in the gles tests, use #ifdef __APPLE__ directly instead of defining
BUILD_ON_MAC. this is consistent with the desktop gl test, less magic,
and corresponds with the later usage (which does #ifdef Q_OS_MAC).
amends f3d82a89.
in the desktop gl test, clean out the dead Q_OS_MAC define from the
project file (added in 45dc5852 concurrently to the more direct fix in
864815ef).
Change-Id: Ieebad3c7e87218b887f61485c331b93eadfcf406
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
CID 11161 (#1 of 1): Missing break in switch (MISSING_BREAK)
unterminated_case: The case for value Qt::BottomToolBarArea is not terminated by a 'break' statement.
Coverity-Id: 11161
Change-Id: Ie254d0339e41a58004632e9997febac4a1ab4edd
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The coordinates need to be representable in signed 16-bit not unsigned.
Task-number: QTBUG-62251
Change-Id: I1d4aaa2fb90b8f428380277d5b4e416a4672ee6a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Commit 9e64fc9e1c caused a regression
which stored all QDateTime entries as if they were in localtime,
which causes them to be offset by the amount of local timezone
offset. This is fixed by adding "Z" if the time should be in UTC or
using "+/-hh:mm" if it should use fixed UTC offset or specific
timezone.
Task-number: QTBUG-57138
Change-Id: Ie60905dfb3a517db442b636ca41daf8348753d84
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
For clang -Os is very similar to -O2 and doesn't really reduce size much.
-Oz is usually what you want to use with clang for code reduction.
Now clang binaries are only 9% bigger than gcc's, instead of 22%.
Change-Id: Ib0ba560be26db68aeb21c13df4b151b7fbd81431
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If ibus has been set, but either isn't installed or doesn't launch, all
composition fails on xcb. This ensures we fallback to "compose" which
is needed for working composition on XCB.
Change-Id: Ic2061c330bcb907759a13920c3eede14f3036563
Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, the updating of drives in QFileSystemModel was connected
to a signal triggering when a drive containing watched files was
removed via QFileSystemWatcher notification. This did not trigger
when a drive that was not expanded in the view was removed, since
no files were watched.
Since QFileSystemModel is not interested in the path of the drive
being removed, add a generic signal triggered by
DBT_DEVTYP_VOLUME/DBT_DEVICEREMOVECOMPLETE and use that to update
the drives.
Complements 8e79806d08.
Task-number: QTBUG-18729
Task-number: QTBUG-53436
Change-Id: Ibcde4665824c41151042237d4d620c48bc1e2e18
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move the logic to set default values for VERSION,
QMAKE_TARGET_DESCRIPTION to qt_app.prf. This way,
a lot more executables get sane defaults.
Change-Id: I8394418c118a8877cec792eddc8894397c0fbf2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the tool description even simpler so that e.g. moc shows up as
"Qt Moc". The 'description' is shown in various places as the mere
title, so it shouldn't be too verbose.
This augments change ad68bf51e7.
Task-number: QTBUG-61970
Change-Id: I4b30b95a10d597a9a8a2c388c2381ea38a340be6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Restrict the checking to the internal window handle to prevent it being
thrown off by other WM_USER messages used by applications.
Complements change 124b9a6ff8.
Task-number: QTBUG-62083
Change-Id: Ifb1b00e4ff70cb7e53873943e46cea0d72ff6257
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is just wrong.
It suggests, that it tests minimal block size,
but in reality it is checking if a maximal peak of block size
is bigger then expected minimum block size.
The minimal block size is 1, not 1024 / ideal threads count and
it is defined in BlockSizeManagerV2.
The maximal block size is defined and it is fixed, but it is an
implementation detail, probably not worth testing.
The test is based on a race condition as peakBegin and
peakBlockSize are modified in parallel from multiple threads,
without any synchronization.
Change-Id: I430eedcf83b0fa3e2ce2cfd294eaee7b301e48ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In QFileDialog, when a resolved symlink gets deleted, the actual target
it points to gets deleted instead of the symlink itself. The patch is to
delete the symlink rather than actual target by doing the following:
1. In QFileDialog, if a directory being deleted is a resolved symlink,
do not remove the directory. Instead, call QFileSystemModel to remove
the model index.
2. In QFileSystemModel::remove(), use the full file path instead of
the resolved file path for deletion. For a symlink, delete the symlink
itself.
The patch is for Windows and Linux.
Task-number: QTBUG-29770
Change-Id: I4db545f0b5963acde3f89a8ee858338c23104804
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This fixes a problem introduced in a60571b370
The problem happens when an application like Kate (actually, ktexteditor)
uses QSaveFile to save files. So if you open a secretfile.txt file (with
permissions 0600), edit and save it, then QSaveFile currently
generates a temporary file with 0666 that afterwards gets chmod'ed to
0600 again, but in between, some other user in the system can open the
temporary file and get a file descriptor that would allow him/her to read
the contents of a file with 0600 permissions.
Change-Id: I824025f54d6faf853da88e4dfcb092b577b4df04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Before we generated the following content:
set(_qt5_corelib_extra_includes "${_qt5Core_install_prefix}/X:/src/qt5.9/qtbase/mkspecs/win32-msvc")
Which lead to the following error when used:
CMake Error at Z:/build/qt59/qtbase/lib/cmake/Qt5Core/Qt5CoreConfig.cmake:15 (message):
The imported target "Qt5::Core" references the file
"Z:/build/qt59/qtbase/X:/src/qt5.9/qtbase//mkspecs/win32-msvc"
=> We prefixed an absolute path with another absolute path which is
obviously wrong
After the patch we generate this content:
set(_qt5_corelib_extra_includes "X:/src/qt5.9/qtbase/mkspecs/win32-msvc")
This patch ensures we never prefix an absolute path additionally
Patch by Konstantin Tokarev
Change-Id: I05dab7f681958723594ceb78064be41798e83fb8
Task-number: QTBUG-61768
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
A crash has been observed on Windows in the use case below:
1) In a non-native QFileDialog, select a file and press "Del" key to
delete it, and a warning message box appears for user to confirm the
deletion.
2) Delete the file in the Windows Explorer.
3) Click "Yes" on the warning message box, a crash happens
In QFileDialog::_q_deleteCurrent(), use QPersistentModelIndex
instead of QModelIndex to ensure that the index is valid to be
deleted. The change is intended to fix .
The patch is to use QPersistentModelIndex instead of QModelIndex
in QFileDialog::_q_deleteCurrent() to ensure that the index is
valid to be deleted.
Change-Id: I8959124dc071f7cf0ab47f954d611211a789978d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Passing a null pointer as a parameter to the setChild function no
longer crashes when calling the
QStandardItemModelPrivate::itemChanged signal. The child is removed
from the model.
The patch also fixes the behavior of deleting a item. A
dataChanged signal is emitted.
Change-Id: I027e8b0d84fe33c5fca056df870f0e60a020824b
Reviewed-by: David Faure <david.faure@kdab.com>
This reverts commit 346cd79192. The bug
report was incorrect, since the suggested file name is actually valid,
it just happens to name an Alternate Data Stream (ADS) "20:803Z.txt" in
file "testLog-03".
[ChangeLog][QtCore][QFile] Reverted an incorrect change from Qt 5.9.0
that forbade the creation and access to Alternate Data Streams on NTFS
on Windows. This means that file names containing a colon (':') are
allowed again, but note that they are not regular files.
Task-number: QTBUG-57023
Change-Id: I81480fdb578d4d43b3fcfffd14d4f2147e8a0ade
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Output family and format error message using _comerror struct.
QWindowsMultiFontEngine::loadEngine: CreateFontFromLOGFONT failed (The operation completed successfully.)
becomes
QWindowsMultiFontEngine::loadEngine: CreateFontFromLOGFONT failed for "8514oem": error 0x88985002 : Indicates the specified font does not exist.
Change-Id: Iccd4622127d94870b4b7465a4b4fdbf34ad1c434
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
OpenType support missing for script 11
becomes:
OpenType support missing for "SimSun", script 11
Change-Id: I562e20d630c9cdd888f75fd99b987de5152cd77e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The test is marked as expected failure for the last 3 years, in CI it
is proven to be somehow flaky and it is failing now because of XPASS
which is not covered by blacklist feature.
This patch extends efforts of 7eba6d039d
and 03b4838cb5 by blacklisting the test
completely.
Change-Id: Ia295d61620fa6bc97b168d4de9456a18ed5c064f
Task-number: QTQAINFRA-1333
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
