Vertical scrollbar may get out of sync. When this happens, the calculation of
firstVisibleItem will retrun "-1". This must be handled in ::sizeHintForColumn().
Added an auto-test for the crashes.
Task-number: QTBUG-34717
Change-Id: I867fd144ef3ce45e382337c5eafe345f573cd944
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Center windows on screen to avoid conflicts with Unity taskbars,
observe minimum geometry for Windows, move cursor out of the
way for Mac. Introduce QScopedPointer to ensure cleanup in
case of failures.
Change-Id: Ic169e015e795597457b8e85a28ff7fcb7b9b9430
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
It's not really clear if styles *must* return a non-negative value for
QStyle::pixelMetric(PM_Layout{Vertical,Horizontal}Spacing), but both
QBoxLayout and QGridLayout seems to be robust enough to handle this.
They will simply make sure that the spacing is never negative.
We therefore make QFormLayout equally robust.
Task-number: QTBUG-34731
Change-Id: I62235bfcd8adf7757cf15bc9927b29650ae6459d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Previously matched Qt.platform.os, however that can only provide one
string. Multiple selectors can be present at once, so we can provide
both unix and linux instead of having to pick the most specialized one.
Task-number: QTBUG-34796
Change-Id: I219517d740fa7385e923a9e09cb7e241378fbaee
Reviewed-by: David Faure <david.faure@kdab.com>
Up to now, the feature classe Uniform Initialization was subsumed by the
Q_COMPILER_INITIALIZER_LISTS flag together with support for
std::initializer_list.
This caused at least two problems:
1. On QNX, the standard libray does not ship <initializer_list>, even
though the compiler (a GCC 4.6, IIRC) supports it. But since there
was only one Q_COMPILER flag for both, support for the compiler-only
part of the feature had to be disabled, too.
2. MSVC 2013 supports initializer lists, but has a bug that renders full
uniform initialization support, as required for QUuid, useless.
By splitting the feature into two, we can separate them better, and do
so in QUuid, which is the only class that currently takes advantage of
uniform initialization (to provide constexpr constructors).
Since Q_COMPILER_INITIALIZER_LISTS worked as a flag for uniform
initialization so far, with the two known exceptions above,
UNIFORM_INIT is defined whenever INITIALIZER_LIST is, except that
I don't revert UNIFORM_INIT on QNX as I do for INITIALIZER_LISTS
and that I expect the MSVC 2013 features to set INITIALIZER_LIST,
but not UNIFORM_INIT.
Task-number: QTBUG-34705
Change-Id: I81916e950a0f3aab3de7977e0326d2de3d31b14c
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When EnumForms was used then the dmPaperSize was not always correct for
the custom paper sizes available on some printers. By using
DeviceCapabilities we can be sure that the information is correct in this
respect.
This also fixes respecting of the custom paper size if one is given and
there is no corresponding existing paper size for it.
Task-number: QTBUG-34276
Change-Id: I9924d5be8527027fc434261e37f6c7aae66210c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
As the test case shows, clear() is semantically equivalent to
setKeySequence(QKeySequence()), so implement it that way.
Change-Id: Id68edbbf85aac3bcff82c81310c38274ed8e6708
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
With 46a8885ae4, we failed when parsing
entities whose partially expanded size was greater than 1024
characters. That was not enough, so now we fully expand all entities.
Amends 46a8885ae4.
Change-Id: Ie80720d7e04d825eb4eebf528140eb94806c02b1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
need to leave some items out like media folder access, as this is not
available by default and also requires certain capabilities to use
those.
Furthermore updated the tests for sandboxing as well as skip cmd.exe
related tests as that does not exist on WinRT.
Change-Id: I992b1e195b79615bea0be4f84f56cfb8f0d902bf
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
All ci nodes are currently missing 3d support, when that is enabled
this test will start to fail.
Task-number: QTQAINFRA-711
Change-Id: Ie6b840e290a9371fa895681e58d6dedf55b777e6
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Currently network is only required to gather the host info for one
test case. That does not justify to disable all other tests, which can
provide useful information on the state when doing a port. Hence
disable that testcase if no network is available.
Change-Id: I202ef49b3e07ae69ec85ee0432ae0a771a90e816
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It is probably better not to have a default boolean in
QHeaderView::setResizeContentsPrecision
Task-number: QTBUG-34665
Change-Id: I0bb2c35abc1d5713bb3ee65df3af86c04f175a38
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
to reflect the fact that this returns and sets the whole session
ticket, and not just the session ID.
Change-Id: I00fe2bc4197dbcd7a02b3ae4f2f84e3a2a7edad0
Reviewed-by: Richard J. Moore <rich@kde.org>
Add few cases where conversion to or from LongLong was missing
We need to make it work if we want to use variant.canConvert<qint64>
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert with longlong
Change-Id: I0f65073802b62d99250601dd90a8cd2e4d934b60
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
It introduces QTBUG-34653 (Qt Designer widget box no longer
repainted after collapsing items or using the filter).
This reverts commit 04de24c644.
Task-number: QTBUG-13522
Task-number: QTBUG-34653
Change-Id: Ieb9766e7f15acea901fce4ad7142aa72557b9957
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The tracing API still misses some real-world exposure. Let's
re-do this in dev to have more time.
This reverts parts of following commits:
466e0dff4b7a47aebe9ea652bab6a78f0654ceb84162522edd32f27b43679ff81bdc1a
Change-Id: If97340c37b8b3363f597683336a8390d5ff386f1
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The problem is the verifyConstExpr<>() line involving the ~ operator.
The result as an integer is a value that can no longer be represented
in an int. This is known at compile time and thus template deduction,
which only has an int to match against, fails.
To fix, use an unsigned int as the first template argument of
verifyConstExpr<>().
Clang's error message for this is really sub-optimal, cf.
http://llvm.org/bugs/show_bug.cgi?id=17834
Change-Id: I3a77dc54d2bee12b016d75724ac1bd7801f4cf2d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure that the size of QIntegerForSize<N>::{Signed,Unsigned} is
actually N.
Change-Id: I221304f7c420e80758ef7b115bafb7cf1f8c8829
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since the original change caused a problem with the CSS
rules being always inherited where in some cases this should
not be happening.
This reverts commit 6f65466137.
Change-Id: I6e9cf163d752b1869b5e967a7ab59963d655ba87
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This is what ConfigLocation was meant to be. A directory shared by all
applications. Unfortunately when I wrote the fallback on Windows,
I picked DataLocation (which is app-specific) instead of
GenericDataLocation (which is shared between apps). This makes it
impossible to have config files shared between apps, e.g. for libraries.
It also makes ConfigLocation quite inconsistent (on Windows one cannot
use it to load another app's config file, while it works everywhere else).
All this is fixed by GenericConfigLocation, which is shared between apps.
Change-Id: I23a755131061d4fea01e13dd1038fbd8ef333a5d
Reviewed-by: Alex Richardson <arichardson.kde@googlemail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only DirectConnection is tested
Change-Id: I525c6a65428489c34e58d1d9600b4e5ebda733b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Nested references with a depth of 2 or greater will fail. References
that partially expand to greater than 1024 characters will also fail.
Change-Id: Id4e49d6f7cf51e3a247efdb4c6c7c9bd9b223f6e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Allowing for creating a printer in various modes
and toying with the paper settings.
Task-number: QTBUG-34276
Change-Id: Ieb35dc55c509f84d7d81817c7903e02a41ba8b44
Reviewed-by: John Layt <jlayt@kde.org>
WinRT doesn't use the Windows Timezone backend, so don't build the
Windows test.
Change-Id: I32620546de3ad1f19402cc1359f8038200c915ec
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This should be using qputenv; putenv is deprecated on MSVC.
Change-Id: I7c27cf5f7955624fa3553b7a34ab11c6fae462b8
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The grabbing always grabbed the desktop. This caused it to also grab
tooltips, siderbars etc that could overlap the window which again
caused the pixmap comparison to obviously fail.
This will currently only fix it on windows. If needed, it should also
be fixed for other platforms.
Task-number: QTBUG-30566
Change-Id: I5cee8651e1d94dedded0acae8b19f351acd976c4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Check if the item is hidden before show the item(QWidget)
Task-number: QTBUG-13522
Change-Id: I1c605d5cb8a80f340e9b7601612d3760f51cb4a7
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The current synchronization mechanism was racy: decrementing waitingThreads
and then hoping that the wakeOne will wake a thread before its expiry
timeout happens. In other words, on timeout, a just-assigned task would
never run. And then no other task would run, if maxThreadCount is reached.
Fixed by using a queue of waiting threads (rather than just a count), and by
moving the wait condition into the thread itself, so we know precisely
which one we're waking up, and we can remove it from the set of waiting threads
before waking it up, and therefore it can determine on wakeup whether it
has work to do (caller removed it from the queue) or it expired (it's still
in the queue). This is reliable, whereas the return value from QWaitCondition::wait
isn't reliable, when the main thread has already decided that this thread
has work to do.
Task-number: QTBUG-3786
Change-Id: I1eac5d6c309daed7f483ac7a8074297bfda6ee32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass window flags on to ColorWidget constructor and use a window
frame + stay on top-hint for the moveChild/showAndMoveChild tests
to make the screen grabbing more reliable.
Disable animations on Windows since they seem to affect screen
grabbing as well (fading in of windows).
Task-number: QTBUG-30566
Change-Id: I8eacfc203d26674dc1b283d6643f3d434f218f26
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It is now configurable if test results are stored in xml, plain text
or in both formats. Default is xml, like it was,
Max runtime is also configurable so that we can reduce the CI round.
With default setting it takes more than eight hours within current
CI node.
The latest test result dir is linked as latest.
Change-Id: I5d27cefe17e4f86648132db7ec104711d993c3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We must not include qt_windows.h in public headers,
otherwise we're cluttering the environment with a colorful
bouquet of Windows API preprocessor macros and typedefs.
Task-number: QTBUG-34058
Change-Id: I415717ea2a47f39e7f4b7ce1c1df9d49afc99278
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
CGPostMouseEvent is obsolete and known to have "undocumented special
cases and undesirable side effects." The newer Quatz API doesn't
allow neither multiple mouse button events nor preserving the mouse
cursor location.
Change-Id: I121b02fd01e2990488b05e45431cbdc13589656e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
[ChangeLog][QtWidgets][QAbstractSpinBox] QTBUG-5142 - This will
allow a group (thousand) separator to be shown in QSpinBox
and QDoubleSpinBox widgets.
Task-number: QTBUG-5142
Change-Id: I2e23f5f83c93bb092a2dbd784e06d17d40d42909
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Only Commit, Finish and Cancel didn't have an object name, yet.
Also Extract Method on the switch statement, add a test, and
use QStringBuilder.
Task-number: QTBUG-29924
Reported-by: Leo Arias
Change-Id: I8c29606bc53e9d4caab631da2089e971a9da2d75
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Move the test for QAbstractPrintDialog from widgets into printsupport
Change-Id: Ia7595fa650a7ad565df3090207500ed06564e842
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Required for QQuickText & friends to implement image resource handling
in a clean way - to get rid of QQuickTextDocumentWithImageResources and
eventually make QQuickTextEdit's document interchangeable.
Change-Id: I97314a6c3e2d5726539d5722795a472631388cb0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
After Ic12de12ec51c20de52d040514e90be5e783add43 this functionality
was broken. Added an autotest.
Task-number: QTBUG-34159
Change-Id: I8f41b7073dc57fea855ab87796f09e8a91520d13
Reviewed-by: David Faure <david.faure@kdab.com>
The default link color used to be resolved to the link color of the
application palette, but got lost during the Qt 5 modularization (see
commits 7351a43 and 3f9a7f9).
Task-number: QTBUG-28998
Change-Id: I7f07427f6c03f83c557100938ad9f7a39349d303
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
the method returns true if there is not such field.
Change-Id: I25db8de4561d3e0604f3e64edc1810140ba4aad2
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We change the behavior slightly from the initial implementation in
5.1. Forcing the use of native child widgets is causing massive
performance issues so instead, we attach the embedded QWindow directly
to the root window. The only exception is QScrollArea and QMdiArea
which still enforces native windows for the entire parent chain
to make clipping and stacking work.
Task-number: QTBUG-34138
Change-Id: If713637bd4dce630552ace2f8ad6b2e86c063721
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Introduce QStyleHintsPrivate and introduce internal
setters called by QApplication.
Task-number: QTBUG-33991
Change-Id: Id61f8b1e2b5c9cfd7b4713aaded66e93e6f63719
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
- Fixed issues when having multiple devices connected at the same
time.
- Fixed hard coded paths
- Removed not existing function call, which caused test run to exit
too early.
- Added possibility to add and connect to device, configured as env
variable.
Task-number: QTQAINFRA-641
Change-Id: I8c1e003ce4ffbc9fdd9572dc55eef8fe92330cba
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The handling of the null QPolygonF case was not correct as it would
always be seen as valid. This ensures it is treated in the same way as
QPolygon when it is in fact null.
[ChangeLog][QtGui][QPolygonF] When a QVariant holds a QPolygonF()
then it will be correctly seen as a null QVariant.
Change-Id: Icae34f513c3a8e1dd3f50cb64a3d13ae7c636cc4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The RFC 2822 date format should always use en_US locale for month and
day names instead of whatever the system locale is. Also remove some
duplicate code.
Change-Id: Ia2f7ee405b4e0e2f04980301783b9488628da73f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added clarifying explanations to the QEXPECT_FAIL statements.
Now it should be easier to understand what is expected from the parser.
Change-Id: I1dacd60564f292d9ce43de7254525c34fa7cdc55
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Check if the datetime is valid before converting it to a different time
spec. If it is invalid then just change the spec to keep behavior
consistent with 5.1.
Task-number: QTBUG-34020
Change-Id: I6630ec1d50f810a2178ab3222bd32af018085f81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the default output of the logging framework to prefix messages
with a 'category: ' in case the category is not "default", so that e.g.
QLoggingCategory cat("qt.core.codes.windows");
qCWarning(cat) << "MultiByteToWideChar: Cannot convert multibyte text";
will print
qt.core.codes.windows: MultiByteToWideChar: Cannot convert multibyte text
while output from qWarning etc will show unaltered output. This should
help users to discover categories, and to group output together.
Change-Id: Iac2e1514f7dc5671966c36a440a119c857564cfc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
the function is a trivial wrapper for the QTextCodec one, so there is
little point in explicitly testing it.
Change-Id: I0c4950e5a54b7ffff9ba73a001cedb517497a596
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are a few problems with the Quadruplor setup in Qt 5.
First of all, it doesn't work with modules, since it has
a hard coded library dependency list. Second of all, it
duplicates the application template, so changes need to also
be duplicated. This often gets out of sync. Third of all,
it duplicates a lot of deployment rules which are now contained
in androiddeployqt.
Task-number: QTBUG-33996
Change-Id: I0630a38aeba7d0075df8fae671abc311fc36de61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
No need to default to yet another SDK here. This is a left-over
from Necessitas, which supports versions down to android-4.
Change-Id: I2e79be641288c14f92c205b30f2db6db793d783f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This fixes QStatusBar so it is back to the original behavior of only
emitting the signal when the message has changed. The intention of the
code that caused this to break in the first place is kept intact.
Change-Id: I2f57c2abec01246ed924626ad954ac9ff9889855
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QAccessibleImageInterface already has an API to return the
size of the image.
This function ensures that their API's are not overlapping.
Alternatively, we could merge both functions into
QAccessibleImageInterface::imageRect(), but the assumption is that
images change position more often than their size.
Change-Id: I55c25cdff187b9f497828f04cfd5f969cfbc451f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This is a performance and memory optimization which also fixes bugs
that are related to creating widgets, file system models etc.
despite using platform native dialogs. Similar to
785bc64f8e for QColorDialog.
Task-number: QTBUG-33039
Change-Id: Ia1aa7ec1f43b47006b9ebd377aed15c958538a17
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the QPolygonF type was added to QMetaType it did not bump up the
values in load() and save() for QVariant.
Task-number: QTBUG-33981
Change-Id: I7ad99cda70620c5449c15527c3daf920972d047f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The test is randomly failing on CI when ran on 10.7.
Task-number: QTBUG-31454
Change-Id: I79fce9a37616c6abaee960e338f8eea8fe6f31cf
Reviewed-by: Jani Heikkinen <jani.heikkinen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Position cursor outside and move once more.
Task-number: QTBUG-33972
Change-Id: If060f1359361981cf1243d8d2a4ebef181689d74
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This patch merges the two classes that were used to make
dock widgets accessible into one.
The title bar does not need to be represented by its own
accessible object.
In addition the buttons on the toolbar are now labelled.
Task-number: QTBUG-33946
Change-Id: Id90d8c09f15ed683e64dbe3f6ac55bca7a0b300f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The pointer can be null. Going trough the reference invokes undefined
behavior here.
Change-Id: Ia84e4e732cdcbbaee0f5f0679765d18069ea8b2d
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The cursor needs to be within the view from start on Mac.
Task-number: QTBUG-33973
Change-Id: I313c9fd1c3a917e135a92497f1818d1b0d8b7698
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When CSS was set in the head tag then it was not being inherited by the
child tags. This ensures that the inhertiance happens and that the deeper
the CSS is set then it will ensure that it has precedence over the ones
set on the parent.
A test is added that shows the standard inheritance from the head tag and
the precedence from child tags in effect too.
Task-number: QTBUG-28770
Change-Id: I30be3ec141b2cd8d6e0db8a92669aed34da93b33
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This makes it so that two QVariants created from the same
QIcon (or from QIcons that were assigned one from eachother)
compare to true.
Unfortunately creating two QIcons with the same path and
comparing them still gives false as they have different cacheKeys
Change-Id: Iafe2bc4082a830f9c6469f083c26a7abbe4b35c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This yields the same results as previously and is more in line
with existing interfaces.
Change-Id: I0bf0372bf18f3bfde579385cddbe594bf71e3c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qtbase/tests/auto/corelib/io/qfilesystemwatcher/tst_qfilesystemwatcher.cpp:652:36: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
f.write(QByteArray("i am " + i));
~~~~~~~~^~~
qtbase/tests/auto/corelib/io/qfilesystemwatcher/tst_qfilesystemwatcher.cpp:652:36: note: use array indexing to silence this warning
f.write(QByteArray("i am " + i));
^
& [ ]
Change-Id: Icc966559be3c2cde3416193b8a1ddab7e0323ade
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I5a1e601e3aa6e84300efa09bfbd9232fecab903e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: Ib1047731667ba8a7b9db2f62924eb42a6b85b4fd
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Change-Id: I88d98421978e0f5c55af8647f3f74c265b45bd37
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On one suse box I have both /usr/bin/sh and /bin/sh which means that the
test should prefer the one first in the path instead of random order.
Change-Id: Ie94bf8404479fa42a36a8ee45e09986114693871
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QCoreApplication test has quite a few test cases that we would like
to exercise using the GUI event-dispatcher. Instead of duplicating the
tests for the GUI dispatcher, we inherit tst_QCoreApplication, which
also lets us add extra tests that are specific to tst_QGuiApplication.
Change-Id: Ib411457131b8d3fed871f682c1c0568577f6127d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
If create() or makeCurrent() calls fail, the test should fail fast.
Change-Id: I025c541f94c8eee492cf0e1545bfbb8027eff2a7
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
At the Daylight Tme to Standard Time transition, the local time repeats
itself, i.e. 2am occurs twice. Qt's behavior when setting this using
the local time is ambiguous, as it depends on the system implementation
of mktime, which behaves differently on different platforms. Currently
this behavior remains undefined. When setting using an msecs or time_t
value however we can determine the correct instance to use and cache it
to ensure that any conversion back from local time to msecs is performed
consistantly on all platforms.
Note that caching this value will result in any calculations being wrong
should the system time zone change, or its rules change. This will be
fixed in Qt 5.3 when the system time zone change signal is implemented
and QDateTime switches to using QTimeZone instead of mktime to provide
consistnt behavior across platforms.
The QTimeZone spec does not require this fix as it already caches the
correct offset in setMSecsFromEpoch().
Change-Id: I799588db474e744a6d81e80f6a0442920569ebd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function is useful if a floating point comparison requires a
certain precision. The return value can be considered as the precision.
For instance, if you want to compare two 32-bit floating point values
and all you need is a 24-bit precision, you can use this function like
this:
if (qFloatDistance(a,b) < (1 << 7)) { // The last 7 bits are not
// significant
// precise enough
}
Task-number: QTBUG-32632
Change-Id: I020a58d2f9f9452ac3c510b4bb560dc806f0d93c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-26722
Change-Id: I579111b5d34f8e3cdc6bb016d9c0e42ec3ffb8c9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Stephen Chu <stephen@ju-ju.com>
Mac uses the CLDR format codes which need to be translated into their
Qt equivalent. The existing code mistranslates the year code, is
outdated for a number of new codes introduced in recent versions of
CLDR, and by default accepted any codes it didn't recognize.
This change updates support to the latest version of CLDR, fixes the
treatment of years, and defaults to ignoring any new format codes
added in the future.
Note that this change cannot have auto tests written as the system
locale formats change between versions of OSX. Testing must be
done manually by changing system locale and formats.
Task-number: QTBUG-25057
Change-Id: I69dda25b4a0b38d3971995644546306876922d57
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In case of implicit memory sharing, QString::reserve caused data
truncation if given size was smaller than size of data.
Task-number: QTBUG-29664
Change-Id: If2da5ad051385635ebb829c18b5ebaa349f08e8a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
If we end up QSKIP'ing the test 'wronlyFileName' is never created.
Change-Id: I2ccbfdb630b58d7904e73b476a65a82a45ab90d7
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Commit 310031188c (Fix moc stumbling over gcc __attribute__
extensions, 2012-10-01) applied similar logic for GNU style
attributes.
Change-Id: I550eaefd703b4e974e6ffae7716f02074c8a8823
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This simplifies the code a bit and ensures that it is respecting what
the relevant function expects the size to be as.
Change-Id: Iec88fab84c27a33d6f1a9e9413ea6beb0a39c68d
Reviewed-by: John Layt <jlayt@kde.org>
Unfortunately we returned the column description when the AT client
asked for the row description....
Change-Id: I46bc0edb4fd0f7cc6d98d7d6e0d8ca6f77553a26
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Fixes the obvious race between the test of 'release' in the thread
and the setting of 'release' in the test function.
Change-Id: I92df52d7b18e8154f17229a3dbd4a0e58f4a3b5b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The code uses a QSignalSpy to check whether the thread started,
but the signal emission (and subsequent appending to the spy) and
the check for spy.count() before the final thr.wait() are not
synchronized:
The signal emission happens-after the thr.start() and -before the
final thr.wait(). Likewise, the spy.count() happens-after thr.start()
and -before thr.wait(), but neither one happens-before the other.
Thus, there is a data race.
The wait(200) between thr.start() and mutex.unlock() doesn't help,
either, because we check only that it doesn't return true, iow, we
check that it timed out. But it will happily do that if the thread
has not yet started executing, so there's no happens-before relation
to be had via that avenue, either.
I first fixed by moving the spy.count() check to after thr.wait().
In that case:
signal emission happens-before thread finishing
happens-before thr.wait() returning
happens-before spy.count()
so no race.
Arguably, that makes the check rather useless, so I decided to remove
it completely.
Change-Id: I6bb47c4114961ee6e9251cfebeb4b7794ba674a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Remove benchmark tests that are no longer required as they are simple
overloads of other methods.
Change-Id: I610211543d17c077f482fa2145ac3da7d0767282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support to QDateTime for time zones using the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Add support for a new Qt::TimeZone
spec to be used with QTimeZone to define times in a specific
time zone.
Change-Id: I21bfa52a8ba8989b55bb74e025d1f2b2b623b2a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add backend implementation for Windows times zones.
Change-Id: I30946f6672488c3f1d1d05754e9479aa62cce46f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a backend for TZ Files.
If available uses ICU for the display names and translations, otherwise
the abbreviation is used.
Change-Id: I58c777462810b1a76ea7bd95886836b70b8a3db5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement the new QTimeZone class based on the Olsen Time Zone ID's.
This is the base implementation and does not include the Platform
backends which are implemented separately.
This change does include a default UTC backed to be used if no Platform
backend is available, i.e. if QT_NO_SYSTEMLOCALE is set and ICU is not
configured. This backend also provides a default set of time zones in
the standard "UTC+00:00" offset format that are guaranteed to always
exist regardless of the Platform backend.
This change includes conversion functions between the Olsen ID's and
Windows ID's using a conversion table based on Unicode CLDR data.
This is implemented for all platforms for scenarios such as a Linux
program needing to communicate with a Windows Exchange Server using
the Windows ID.
The CLDR conversion table is included under the UNICODE license, see
http://unicode.org/copyright.html for details.
[ChangeLog][QtCore][QTimeZone] Added new QTimeZone class to support
time tone calculations using the host platform time zone database
and the Olsen time zone ID's.
Change-Id: Ibb417d08cf2663a0979d2be855d2c6ad6ad01509
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using __LINE__ to construct unique names, use of Q_STATIC_ASSERT
is limited to one instance per line of code. On compilers that support
__COUNTER__ (GCC and MSVC, probably others), we can get around that
limitation by using that one to always get a new unique number, so
use it.
Change-Id: I89bcfaa32376b7a665f03e4275e89b13fa3e650d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sometimes it is nice to be able to replace a widget in a layout.
Change-Id: I23a6a65e417e94d53bc48639503db1a142bc3f10
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
New API:
static QString QString::fromCFString(CFStringRef string);
CFStringRef QString::toCFString() const;
static QString QString::fromNSString(const NSString *string);
NSString *QString::toNSString() const;
static QUrl QUrl::fromCFURL(CFURLRef url);
CFURLRef QUrl::toCFURL() const;
static QUrl QUrl::fromNSURL(const NSURL *url);
NSURL * QUrl::toNSURL() const;
Add Q_OS_MAC-protected function declarations to header
files, add implementation to _mm files.
CF and NS types are forward-declared in the header
files to avoid including the CoreFoundation and Foundation
headers. This prevents accidental use of native types
in application code. Add helper macros for forward-
declaration to qglobal.h
Add cf_returns_retained/ns_returns_autoreleased attributes
to toCFString() and toNSURL(). These attributes assists
the clang static analyzer. Add Q_DECL_ helper macros
to qcompilerdetection.h.
Add test functions (in _mac.mm files) to the QString
and QUrl tests. Split out the test class declarations
into a separate headers files.
Change-Id: I60fd5e93f042316196284c3db0595835fe8c4ad4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is consistent with other areas of Qt:
qmake, Qt.platform.os (QML), qbs.targetOS (QBS), and #define Q_OS_OSX.
Change-Id: Ibf98e6ba3556a14187dadae1b0235e9c907c9001
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QCompleter::setFilterMode(Qt::MatchContains) will enable filtering
out entries that contain typed characters in any place, instead of the
default behavior when only those entries that start with typed characters
are displayed. Qt::MatchEndsWith is also possible.
QCompleter::setFilterMode(Qt::MatchStartsWith) will bring the default
behavior back.
Task-number: QTBUG-3414
Change-Id: I3845704c59eb8fc401e9a650c54a9c934ed28c2e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The compiler complained that the specialization was required
before it was issued. Fixed by moving it up to the others
near the top of the file.
Change-Id: I0ae162a5db5ef29f24cd1d32285a1870fdd24b9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Merge most parts of the qlogger framework from
git://gitorious.org/qtplayground/qlogger.git
The categorized logging feature is a replacement for qDebug, qWarning and
friends. With logging statements in an app/library, a developer can
turn on the statements they care about and turn off the ones they don't.
Most work for this was done by Wolfgang Beck and Lincoln Ramsay.
Task-number: QTBUG-25694
Change-Id: Ib0cdfbbf3694f86ad9ec553b2ea36f09a477cded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add new method to return if the current time is Daylight Time.
[ChangeLog][QtCore][QDateTime] Added new method isDaylightTime() to
return if the datetime is in Daylight Time or not.
Change-Id: Icb93fd5dd0b2f7d83d2d4643eeb12922c1137e3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When Daylight Time transtion goes from Standard Time to Daylight Time
there is a "missing" hour, i.e. at 2am CET the clock goes forward to
3am. Currently QDateTime ignores this gap and considers the time to be
valid and able to be manipulated. This change respects the transition,
so any time set in the missing hour is considered invalid, and any date
maths returns valid results.
The validity in the current time zone needs to be checked every time
isValid() is called in case the system time zone has changed since the
last time it was checked. This is done by calling mktime to check the
returned result matches the expected result. This could be very
inefficient, but the returned offset value is cached each time so
mktime is not required to be called again within each method call,
effectively meaning mktime is called the same number of times by
each method. Note that this means any new methods added must be
careful to ensure either isValid() or refreshLocalTime() is called
first by any method needing to use the UTC value.
[ChangeLog][QtCore][QDateTime] The Standard Time to Daylight Time
transition for Qt::LocalTime is now handled correctly. Any date set
in the "missing" hour is now considered invalid. All date math results
that fall into the missing hour will be automatically adjusted to a
valid time in the following hour.
Change-Id: Ia652c8511b45df15f4917acf12403ec01a7f08e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change from storing the date and time as QDate and QTime to a serialised
msecs format. This format is a direct translation of the QDate and
QTime values, it is not the actual msecs since the Unix epoch. This
msecs format ensures we are always able to recreate the original QDate
and QTime values, but should still simplify the code and improve
performance.
Because we no longer store the explicit date and time we need to store
their isNull()/isValid() status separately.
The changes in storage results in the same memory footprint as before.
Note that this change does not optimize the code nor set out to fix the
known bugs, it only seeks to maintain the current behavior, although
some bugs are fixed implicitly. More bug fixes and optimizations will
follow.
[ChangeLog][Important Behavior Changes] The supported date range in
QDateTime has been reduced to about +/- 292 million years, the range
supported by the number of msecs since the Unix epoch of 1 Jan 1970
as stored in a qint64, and as able to be used in the
setMSecsSinceEpoch() and toMSecsSinceEpoch() methods.
Change-Id: I98804d8781909555d3313a3a7080eb8e70cb46ad
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids the assertion in iaccessible2.cpp(510)
Change-Id: I1a4c007ffcbcda70f0e37ef3cf55a303683b58c1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The test has been failing on all platforms. Usually it just times out,
but it also have behavied flaky, failing with different error codes
when executed twice in a row.
Task-number: QTBUG-29403
Change-Id: Ic06638f0ffd23131b4c1aa4136f715195727e959
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This allows the application developer to restructure the application,
including moving the central widget some place else.
Change-Id: Idca2f74c190500db24404e020b0eb400e41aad10
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
There is no point in having QAccessible2, so merge it with the normal
QAccessible. The header will be removed in a subsequent commit as it is
still needed by declarative at this point in time.
Change-Id: I1fc47d484d482f25387eba827bc5a373536b7a8b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
On linux using QFileSystemWatcher with inotify backend when a watched
file is moved and added again to the watched files its path is not
replaced with the new one. This behavior prevents the emission of
the fileChanged signal with the wrong file path.
Task-number: QTBUG-33211
Change-Id: Ib45d8efdf5afbf8b8f6b4b26e43f3d6ee740aca6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a disagreement between the a11y plugin and QTreeView
whether the horizontal header should have been exposed or not.
When the header was hidden, this resulted in that we sent an event
with a child id that was wrong, or in worst case higher than
QAI::childrenCount(). This was the reason we got the warning
output as described in the task.
With this commit, we consistently *expose* hidden headers both for
QTreeView and QTableView, but ensure that their state().invisible is
set to true instead.
This makes it consistent with how hidden cells are exposed.
This also fixes a bug in QTableViewPrivate::accessibleTable2Index
where we always added 1 to the index, which was spotted while
writing the test.
Task-number: QTBUG-33247
Change-Id: Ifd1f83d56296dd071424fdb81fce7628bc24fe0a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Similar to commit 8b062418 (MetaType: Fix operator{+,-}(int)
with the type-erased const_iterators., 2013-09-11), explicitly
create a copy of the iterator and intialise it.
Change-Id: I8b9edef40ca00c826f72768cba4a0992e55371f8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For easy cross-platform and cross-device UIs, automatic asset swapping
based on filename is being developed. This API provides the logic for
the swapping, so that applications can use it themselves with the same
logic as any automatic swapping done in application templates.
Selector set is initially minimal, aiming for just platform selection
and enabling a common selection mechanism for Qt platforms to use.
Change-Id: I219517d740fa7385e923a9e09cb7e241378f857a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The responsibility of sendWindowSystemEvents() is to process events from
the window system. Historially that logic was part of the QPA/QWS event
dispatcher, which naturally also sent posted events. Through refactoring,
the code at some point ended up in in the QWindowSystemInterface class,
still with the posting of events in place.
This resulted in QPA event dispatchers adopting a pattern of just calling
sendWindowSystemEvents(), as that would cover both posted and window system
events. Other event dispatchers would call sendWindowSystemEvents(), and
then use a base-class implementation from QtCore for processing events,
resulting in two calls to QCoreApplication::sendPostedEvents() per
iteration of processEvents(). This breaks the contract that processEvents
will only process posted events that has been queued up until then.
We fix this entanglement by removing the sendPostedEvents() call from
QWindowSystemInterface::sendWindowSystemEvents() and move it to the
respective event dispatchers. For some EDs it means an explicit call
to sendPostedEvents, while others were already doing sendPostedEvents
though a separate source (GLib), or using a base-class (UNIX/BB), and
did not need an extra call.
We still keep the ordering of the original sendWindowSystemEvents()
function of first sending posted events, and then processing any
window system events.
Task-number: QTBUG-33485
Change-Id: I8b069e76cea1f37875e72a034c11d09bf3fe166a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Center gravity doesn't mean center the window, it only affects the
method of converting between internal window bounds and decorated bounds.
So wanting to have each dialog centered w.r.t. its transient parent
is not a reason for using center gravity. Instead it caused the
bug that when you resize a QMessageBox by clicking the Show Details
button, it jumps downwards on the screen.
Task-number: QTBUG-32473
Change-Id: I3fabf3caa1e4d10fd4f7508e297f73efe5cc51b6
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This also fixes it in case of hidden or system files, which
were missing from the filter (found by Denis Kovalskiy).
Change-Id: Ic12de12ec51c20de52d040514e90be5e783add43
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code smply copied 100 shorts from the pointer passed into the
ushortarray ctor, regardless of the actual bounds of the original array.
Fix by making the ctor take the array by deference, deducing the size
as a template parameter, and only copying that much.
Fixes asan trace:
==18660==ERROR: AddressSanitizer: memcpy-param-overlap: memory ranges [0x7fff3c56de00,0x7fff3c56dec8) and [0x7fff3c56dd60, 0x7fff3c56de28) overlap
#0 0x457161 in memcpy asan_interceptors.cc:330
#1 0x4c40fe in ushortarray::ushortarray(unsigned short*) qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:62
#2 0x4b0437 in ushortarray::ushortarray(unsigned short*) qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:63
#3 0x47b643 in tst_QUrlInternal::idna_testsuite_data() qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:119
...
Change-Id: Ie497bc8d337bc680a562482ca71ace535797ffb3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'val' was set to
QList<...>() << ... << ...
further down.
Fixes a Clang warning.
Change-Id: I5fe80d87dbe2c1d50652dfd7b6c5f4a9198cd467
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_STATIC_ASSERT gives better error with C++11 enabled.
Aslo the qt_check_for_QOBJECT_macro had warning on some compiler since
it used null reference
Change-Id: Ic6115da800064b00c50a5762f0b79f5f656bf750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A number of QDateTime functions directly use or modify the data stored
in the private, but future changes to store msecs and status make this
maintenance more complicated. Where possible simplify this code to use
the standard msecs functions, standard constructors, or public api
instead. This greatly simplifies the functions and the following msecs
storage code changes.
This is an intermim step towards storing the time in msecs. Some
functions will be slower as a result of this change, optimization
will take place after all the msecs changes are completed.
Note this also removes a test that used valid QDates outside the range
of msecs, this change in behavior will be documented in the final
mscs change.
Change-Id: I6ef710f24babc7024091010064082e9be0b5bbfe
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test the Daylight Time transitions. QDateTime does not correctly deal
with many of these scenarios so those tests are marked as QEXPECTFAIL.
These bugs will be progressively addressed in coming commits.
Change-Id: I01eba9d6143a792f081542cb198e221efcf28e98
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The "base64url" encoding is defined in RFC 4648, which is the newest
version of Base64. There are also a few situations where the ending
'=' is not desired.
Change-Id: I9bb9fa55817b57d125189e4e795d6fde97caea6d
Reviewed-by: Richard J. Moore <rich@kde.org>
Add new public api to get and set the number of msecs since the start
of the day. Modify QDateTime to use the new msecs api.
[ChangeLog][QtCore][QTime] Added new methods fromMSecsSinceStartOfDay()
to create a new QTime from an msecs value, and msecsSinceStartOfDay()
to return the QTime as the number of msecs since the start of the day.
Change-Id: I285b725b883f1f5524fda87ca81bd64ed99fe6f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A module plugin in qml belongs to a URI/namespace. This
uri is resolved run-time by QtDeclarative by knowing the
path of the qmldir that references the plugin.
For static plugins this becomes a problem, since we lost
the information regarding which plugin belongs to which
qmldir, since a static plugin has no file path.
To avoid pushing the responsibility of clarifying this
onto the application developer, it is better to embed this
information into the meta data of the plugins themselves.
Since this information can be resolved by the
build system, a new option to moc has been added:
-M<key=value>
that will let you add meta tags to the meta data from
the command line to each class that has an IID specified.
For the URI case, we can then e.g do:
-Muri=QtQuick.Controls -Muri=QtQuick.Controls.Private
Change-Id: I81a156660148fc94db6f3cac0473e9e1c8458c58
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These structures do not need to be packed. With some compilers, Q_PACKED
was defined to be empty, which means that the code was working fine
without packing. Or there were some lingering problems on those
platforms (MSVC) and we're now exposing them in all platforms.
Actually, it shouldn't be a problem anywhere. QCharAttributes, quint24
and QFontEngineQPA::Glyph have only char/uchar members, so they're
packed already (they have alignof == 1). The only platform where that
wasn't true was ARM OABI, which we don't support anymore.
QFontEngineQPA::Header seems to always come from a QByteArray, so it
doesn't neeed to be packed either. However, just to be sure, I'm
inserting a check for alignment.
And QFontEngineQPA::Block isn't used anywhere.
Change-Id: Iacfa25edf336ef2a03aeb6e40ae90937a21661ae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
New functions left, right, mid were missing in the api.
Change-Id: I3590a84431555d009d5012b204c111385bdceed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
which would interpret 'path' as a hostname.
The check is in the public setPath so that the internal one can still
support parsing URLs such as ftp://ftp.example.com//path.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
normalizes the path given in setPath, removing ./ and ../ and duplicate
slashes.
Change-Id: I05ccd8a1d813de45e460384239c059418a8e6a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-DKEY="VALUE" was correctly turned into -DKEY=VALUE,
but -DKEY=\"VALUE\" was turned into -DKEY=\VALUE"
due to the erroneous check ('quote' is still 0 when
encountering the first '\' character).
This fixes QCoreApplication::arguments() as used by
moc.exe after porting to QCommandLineParser.
Further investigation shows that double-quotes and single-quotes
are handled differently. The tests now ensure that this parser
respects what Windows sends in argv, and in particular that
QTBUG-15379 doesn't regress, as well as fixing QTBUG-30628.
Task-number: QTBUG-15379, QTBUG-30628
Change-Id: I95062c9a6022632b321b2f6fae3089f07be7b5c6
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of 5.0, this always return true.
Change-Id: If225c7219e283da97e870f0d66a87b21c3cacfc0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMap explicitly sorts its entries by key value. For an ordered container
it's (often?) useful to access the first or last entry, for instance to
quickly compute the next key of the mapping. The first entry is easily
accessible by the STL begin() method, but for accessing the last entry
pretty ugly iterator arithmetics must be applied: *(end() - 1). With
their first() and last() accessors the container classes QList and
QVector provide a much nicer method of accessing extrema, so for
consistency this syntactical sugar also should be applied to QMap.
Change-Id: Ibd544acbad8c3ac16f12a1e74362207ea1694375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Do the same as in mousePressEvent.
Otherwise it is not possible to handle the event
in one of the graphics views parents.
Task-number: QTBUG-8061
Change-Id: I67c7635361a9ed595c513c28ea016e6253fa2101
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Change the debug format from Qt::TextDate to a more detailed ISO style
format including better time spec output.
[ChangeLog][QtCore][QDateTime] The debug datastream is now an ISO-like
format instead of Qt::TextDate
Change-Id: Iddbb8199c3bfbf7bca845482617e7a85da43259d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this patch,
qRegisterMetaType<QSharedPointer<double> >("QSharedPointer<double>")
without a metatype declaration fails to compile, whereas it works
with Qt 5.1 (ie, before commit e9a69c3ba9)
Change-Id: I9408f711c9df810ff29b879b7696dab81c1160f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Clean-up the implementation of toString() and fromString() methods in
QDate, QTime and QDateTime code to be more consistent in ISODate and
TextDate behavior, especially when handling TimeSpec.
Reformat some code so all methods are consistent in appearance and
function to make maintenance easier.
This changes some corner-case behavior in TextDate and ISODate, but
this either fixes bugs or makes the behavior match the documentation.
Change-Id: I457aa1d7cd4f448cd9f8a2e80ec635f3cb98e58c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Switch the implementation of toString() methods in QDate, QTime and
QDateTime to use the QLocale formatter, and remove the now redundant
QDateTime formatter.
Change-Id: Ie4f17c8a6e31acde3ce066f19835bb2b83351ce8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Modify the QLocale date formatter to be consistent with the QDateTime
date formatter and able to replace the QDateTime formatter in a
subsequent change.
Fix the treatment of negative years.
The internal QLocale::timeZone() has been replaced by the
QDateTime::timeZoneAbbreviation() to ensure the correct tz for the
date/time is used rather than always the current system default.
Change-Id: I2ef26700856e2e69b979069226aa504ecbb50071
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
this enables forwarding standard input from the parent process.
Change-Id: I7ee72b9842acc96320d4da693b95dd15d9a7b4d4
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The destructor of the ConverterFunctor calls unregisterConverter. If
the instance is static (as it is in qmetatype.h), then this method
can be called after the QGlobalStatic has already been destroyed.
Change-Id: I33b70734cbe09dfa888e887280c349e43ad1b855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
forwardedChannelsOutput() actually tests forwarding. also having the
older test only eats CPU cycles.
rename the new test to the old name for clarity.
Change-Id: I16a326c8692bb594d7df7897bc53d31b23c66d90
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
close stdin and let the process finish right away instead of first
waiting for a reaction (which is not supposed to come) and then
finishing.
Change-Id: Ifcf200eead5ed95217843e105f9d2dbb5398d646
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
§24.4.1 [iterator.traits] of N3337 makes it *mandatory* to define the
various types
std::iterator_traits<Iterator>::{value,pointer,...}
for any given iterator.
§24.4.1.2 makes it enough to define them within our iterator class.
Change-Id: I1305c8392d224889b09395e30ecc77b194020a15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 5b9006bbdb.
Also revert "Doc: Enable documentation for QScopedPointer's rvalue ref functions"
This reverts commit 5f8416ec65.
Adding a move contructor to QScopedPointer makes no sense, because moving
means 'escaping the scope', which breaks the fundamental point of
QScopedPointer.
Change-Id: I4ac1b108bf199af6e436fa1629aa2d3b93c27724
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Layout items with a Preferred size policy would be treated as fixed
size if they were in the same layout as an Expanding item (or one with
a stretch factor).
This occurred e.g. if a layout was configured similar to this:
1. One item with ExpandFlag/stretch but with a maximumSize set,
e.g. (100x100).
2. Another item with 'just' GrowFlag, and a maximum size bigger than
its size hint.
If the above layout was resized to e.g. (200x50) it would cause the
expanding item to correctly get the size (100x50), but the 'growing'
item would not stretch beyond its size hint.
Instead, it would distribute space around both items, behaving as if
the 'growing' item was fixed'.
The expected behavior is to continue to grow the 'growing' item after
the expanding item has reached its size limit.
Task-number: QTBUG-33104
Change-Id: Ie410653d905f7ca4d702528dafb269f30a0e4f61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Currently there is no API to extract the meta data
from static plugins. This is needed in e.g QtDeclarative
for loading static module plugins.
This patch moves the 'staticPlugins' function from
QLibraryPrivate into QPluginLoader, and makes it public.
As such, we now also export QStaticPlugin.
Since an application developer cannot do much with raw
metadata, we add a new function
QStaticPlugin::metaData() that returns the QJsonObject
for the plugin. The old metaData function is
renamed 'rawMetaData'.
Change-Id: Idb0bf9ad8ebb13340565512e1998b26e762a357e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a new method to return the time zone abbreviation for the current
time spec. For LocalTime this is the abbreviation returned by mktime.
This new method will later be used in changes to the date formatter
and QTimeZone.
Note this change does not implement WinCE support.
[ChangeLog][QtCore][QDateTime] Add method timeZoneAbbreviation() to
return effective time zone abbreviation.
Change-Id: I265a5e96c72eb7236974f80f053f1fb341e3c816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The implicitConstruction() test case will fail to compile if QCursor is
unavailable.
Change-Id: If26743995505a48da648a2fa2a498debec91c933
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When we auto resize it is handy to be able to limit the maximum
size (just like the minimum size).
[ChangeLog][QtWidgets][QHeaderView]A maximumSize for sections
has been introduced. The maximum section size is by default
the largest possible section size which in Qt 5.2 has been
limited to 1048575 pixels.
Task-number: QTBUG-4346
Change-Id: Ida9cbcc11bd5c4498e319df2e6379c69a7033c04
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCheckBox cycles through the 3 states, but item delegates didn't
do that.
Change-Id: Iad1e464341033ca357925fe8064f53bb584459f4
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QTEST_NOOP_MAIN was removed in Qt 5, but was still in the source of the
QProcessEnvironment auto test.
Change-Id: I0048c330c9d4e99c46192cc05ffd3b77d404fb6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Since Qt5, the QMetaObject do not contains the string name of the
builtin types, but only the QMetaType id. QMetaMethod::typeName
convert back from the id to the string. But if the type is aliased,
the string of the main type is returned.
This was the case for example for qint64 which is transformed to
"qlonglong".
This causes a regression in QMetaType::invoke when trying to invoke a
method which return an aliased type, since the string comparison would
fail.
Fix the problem by also comparing the metatype id.
Changelog: QMetaMethod::invoke: Fix return of aliased meta type
Task-number: QTBUG-33222
Change-Id: Iec7b99dcbf7b23eb818de74f413e4451ce510ac4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The new Cocoa event dispatcher made apparent some deficiencies in the
way the dialog helpers were being hidden. In particular, we would not stop
a dialog helper's modal loop when closing the dialog, resulting in the
auto-tests hanging. Also, since the QApplication event loop is runnig with
[NSApp run] in the stack, the previous workarounds are no longer needed.
Task-number: QTBUG-24321
Change-Id: Ifba713c286638d78a699c319a15683d09714f06f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Currently just a convenience method for setNameFilters(), it uses
QMimeType to create a name filter from the glob patterns and
description defined in each MIME type.
In the longer term, this API could be used to do proper mimetype-based
filtering using QMimeDatabase::mimeTypeForFile() in the builtin
QFileDialog (aka "not native"), instead of only looking at globs via the
name filters.
Change-Id: I0edccf5f30c514481b47cd100d743d1ed7a24024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
(dacf9961da)
In order to see 2 active threads, we must check activeThreadCount() before
the runnable finishes.
Change-Id: I1a48b41e0c1fd81a65d915b9bd1e741ff267ed2b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This extends the QLinkedList auto test. This is copy paste
with small edits from the QList auto test.
Change-Id: I5bce7ee304998d1c7258f11b2f31a7fb87706936
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The test was re-using a main window and menu bars for all tests,
clearing and repopulating them. Rewrite the code to be able to
use menu bars and windows on the stack separately for each test.
Change-Id: I13ab31b26b70bc8537e8d8ab164051b3197cd68e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Done with Jan Arve
Task-number: QTBUG-33104
Change-Id: I8319748536d448d1c37a26527ced53156d8c2f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Try to stabilize doubleRepaint and others, try to get them away
from taskbar areas.
Change-Id: Icae8da575999afccb314edafd7deb16446e3d1c2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
This test works with no Qt version (4 or 5) when testing with the
Squid (HTTP proxy) version deployed on the new test server image.
Task-number: QTBUG-33180
Change-Id: If244526a4baed9f3836dade007fe0f15649a8f86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl("http%3A%2F%2Fexample.com") has only a path of
"http%3A%2F%2Fexample.com". In Qt 5.0 and 5.1, the %3A would get decoded
to ':', which in turn makes the URL invalid (colon before first slash).
Found via discussion on the interest mailing list.
Change-Id: I7f4f242b330df280e635eb97cce123e742aa1b10
Reviewed-by: David Faure <david.faure@kdab.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
