This change adds support for BackgroundRequestAttribute to local file request. It is useful
when opening files located in network drives where the file open operation could take several
seconds to complete. When this attribute is activated the QNetworkAccessManager::get call
returns the reply immediately and the user has to wait until QNetworkReply::finished signal
is emitted or QNetworkReply::isFinished function returns true.
Task-number: QTBUG-45925
Change-Id: Ie2019dd94fe04253d1ef6874811d7e749a5aad93
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
A receiver of TouchUpdate and TouchEnd events is determined either
as a widget which has an implicit grab for the touch point or as a
visible widget if there are no implicit grabs. The events are sent
if the receiver has accepted TouchBegin event or if it is subscribed
to a gesture. Before sending the events to the widget they are
delivered to the gesture manager. Thus, in order to detect gestures
for the widget, it must own an implicit grab or be a visible widget.
It can happen that the parent widget is subscribed to a gesture, but
doesn't accept TouchBegin event, as in the case of QScrollArea. Then it
will not get an implicit grab and gesture detection will be impossible.
Activate an implicit grab for such widgets. Also don't send TouchUpdate
and TouchEnd to them, because it's against the documentation.
Task-number: QTBUG-43277
Change-Id: Id767583991def6d76c48ad15eb39af822cad115d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
QTcpServer::addPendingConnection() is protected, so it is possible to
add pending connections from a class derived from QTcpServer. This
derived class can get a QTcpSocket from somewhere else, in which case
d->socketEngine will not be set (or used). Given that it is possible to
add pending connections in this scenario, it would make sense to be able
to retrieve them as well.
[ChangeLog][QtNetwork][QTcpServer] Permit using a QTcpServer with
externally created QTcpSocket.
Task-number: QTBUG-51288
Change-Id: I830c10f1a881e2bca4e4ad716d8be865e1c27a9f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The data function for this test re-used listenAndConnect_data that
has an additional column "connections" which was never used in sendData.
Thus sendData executed three times the same code which is just uselessly
burned CI time.
Copied the actually needed code of listenAndConnect_data to sendData_data.
Change-Id: I6cdb1c1b72cb4ce7be7c13e90eea30ac09a14914
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If a user selected the text "foo" and typed "bar", upon pressing undo,
the text would change to "b". This is incorrect and does not match the
functionality of QLineEdit or the default behaviours of Windows/OSX/Ubuntu.
This was fixed by a change made to always merge two sequential inserts
if they are not part of the same block. Previously the selection delete
and the "b" were part of one edit block and "ar" was part of another.
With this change, the selection delete and "bar" are part of the same
edit block.
Unit test changes are part of a separate review (Part #1) since they
required changes in qtdeclarative.
[ChangeLog][QtGui][Important Behavior Changes] Fixed QTextEdit to match
undo functionality of QLineEdit to group two sequential inserts into one
undo action.
Task-number: QTBUG-38825
Change-Id: I76bf30e331e3526277c3e0ade58cf95b611fc117
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add missing slash to the prefix pointing to the temporary directory.
Change-Id: I0d00f706af58214a9922758a60d097cab7d6bc9d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Verify that the temporary directory could be created. Check whether
the gtk-update-icon-cache binary exists before running and skip cleanly.
Check successful execution. Fixes Windows warnings:
SKIP : tst_QIcon::fromThemeCache() gtk-update-icon-cache not run
.\tst_qicon.cpp(707) : failure location
QWARN : tst_QIcon::fromThemeCache() QTemporaryDir: Unable to remove "D:\\temp\\tst_qicon-DSSn9G" most likely due to the presence of read-only
files.
Change-Id: Ibc8f883121e62b30d71586bc64b42eb6c480925f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calling qMin often prevents effective vectorization, and it is only
necessary when converting from formats with mixed color-channel widths.
Change-Id: I2a0f3f3fb528d45be1fd025758f9d915ee1736c0
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Using shuffle and align storing our quint24 format can be done much
faster. This in particular improves conversions to RGB888.
Change-Id: I179748706a33a43fd6f60f5c40287317418c8867
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Suppose the user connects QProcess::readyReadStandardOutput with a
slot that calls QCoreApplication::processEvents.
Assume the event loop did not handle events between QProcess::start
and QProcess::waitForFinished. The process writes to stdout and exits.
QProcessPrivate::waitForFinished calls drainOutputPipes which calls
QWindowsPipeWriter::waitForReadyRead. This in turn will trigger
_q_processDied via the readyRead signal and processEvents.
_q_processDied will delete the pid object and set pid to null.
After drainOutputPipes returns, _q_processDied is called again but it
must not be called if pid is already destroyed.
Prevent calling _q_processDied if pid is null.
Task-number: QTBUG-48697
Change-Id: Iee047938ee1529057a1a43d71f4e882750903c7e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove the member variable and instantiate only where needed
on the stack to prevent it from interfering with windows created
by other tests.
Remove flag Qt::X11BypassWindowManagerHint as it does not seem
to have any effect.
Task-number: QTBUG-51516
Change-Id: I3bf88bf148f365c57aaf989671f8b9c3c3f0d8e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use default timeouts for wait functions. The increased timeouts will
only have an effect if the tests fail.
Print process errors if the process could not be started, while we're at
it.
Contract consecutive "#ifndef Q_OS_WINCE" blocks.
Change-Id: I6324e4c5b91b89ebb2580635b88705bbda922907
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is what std::vector implementations usually do,
because it minimizes memory fragmentation and useless
allocations since no user will call clear() unless
she intends to append new data afterwards.
Fix calls to resize(0) that show how existing code
tried to work around the issue.
Adjust test. Port from QVERIFY(==) to QCOMPARE as a
drive-by.
[ChangeLog][QtCore][QVector] clear() now preserves
capacity. To shed capacity, call squeeze() or swap
with a default-constructed QVector object, see the
documentation for an example.
Change-Id: I9cebe611a97e027a89e821e64408a4741b31f1f6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Virtually all code in Qt that inspects a QRegion does
so by calling rects(), which returns a QVector<QRect>.
But rects() has a problem: A QRegion that contains just
one rectangle internally is not represented by a QVector,
and the mere act of calling rects() makes QRegion create
one.
So, expose the fact that QRegion is a container of QRects
to users by providing iterators and begin()/end(), which
can be nothrow, since for the one-rectangle case, instead
of vectorize()ing the region, we just return pointers to
(and one past) the 'extent' rectangle.
As a consequence, the iterator type is just const QRect*,
but I think that whatever containers QRegion may use under
the hood in the future, it will be certainly one that is
layout-compatible with a C array.
No mutable iterators are provided, since QRegion maintains
a running bounding-rect, so a mutable iterator would have
to call into QRegion for every change, which doesn't make
sense.
[ChangeLog][QtGui][QRegion] Is now iterable as a container
of QRects: added {c,}{r,}{begin,end}().
Change-Id: I2fa565fac0c1d26e2c0937604b23763cd4e23604
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Given the flakyness of cursor positioning, loosen the check to only verify
that the cursor is outside the window. The hint is only active on Windows
depending on a system setting.
Task-number: QTBUG-51516
Change-Id: I474d251cc41e68f182baf8dba84eaf38d914d7ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test has failed already in openSUSE 13.1 where
it has been marked as insignificant. Incorrect font
size is returned from a font dialog in tst_qfontdialog.
Task-number: QTBUG-46056
Change-Id: I7b5841e90d4cbe9d9573b46ec7dec64432160473
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
It made us skip the rest of the test, not just the small set of
sub-tests that were conditioned by the if () in whose else it sat.
Change-Id: I5e914e0aeb9d5ba44b21966d071aaccbc590365d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QTypeInfoQuery was introduced for 5.6 to decouple isStatic
and isRelocatable so old code continues to work. But since
this test still uses !isStatic to mean trivially-relocatable,
it will fail as soon as one of the checked types is marked as
Q_RELOCATABLE_TYPE instead of Q_MOVABLE_TYPE.
Incidentally, such a change is in the pipeline for Qt 5.7/5.8,
so fix the test by porting to QTypeInfoQuery. Do this in 5.6,
because that's when QTypeInfoQuery was introduced.
Change-Id: I06f815f26ca9b430e124c4a2f8de2a729999762b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The coordinates need to be scaled before calling QPlatformScreen::grabWindow()
On return, set a devicePixelRatio on the pixmap.
Adapt the QWidget test to scale the grabbed pixmaps.
Fixes pixeltool displaying the wrong part of the screen when High DPI scaling
is in effect.
Task-number: QTBUG-46615
Change-Id: I12de7df0da669230cf0fae74f4a42d43f061d5ff
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
As already reported in 2009 (Qt 4.6) QPrinter never actually set the
printer resolution. This change adds the necessary call to
PMPrinterSetOutputResolution (available since OS X 10.5).
[ChangeLog][QtPrintSupport][OS X] QMacPrintEngine now really sets the
printer resolution.
Task-number: QTBUG-7000
Change-Id: I3e851b62e1a7ed78564a8a6fd576b0a18d7eff63
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
OpenSUSE 42.1 failed this case for some reason. With this change
the test tests the anchor from the middle of the string instead
of looking for it from the end.
Task-number: QTBUG-51345
Change-Id: I2fc7496399f46926f261c7a1f48756bfaf782f7b
Reviewed-by: Pekka Vuorela <pvuorela@iki.fi>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The windows.h include is not needed, the enums are properly known to
the metaobject system nowadays, and qprocess_p.h already has a
QT_NO_PROCESS guard.
Change-Id: I6bbdce19f097feb8260c51a29425279049aa0192
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not use a loop to execute similar but separate tests in
tst_QProcess::softExitInSlots. Use separate test rows with
distinguishable data tags instead.
This way we can deduce from CI output which part of this test failed.
Change-Id: Ic9bc996f2ced11b2bb1c33c1970e64937d860976
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When a modal window is closed and the mouse is not under the modal
window - find a proper window and send a fake enter event.
Added auto test for checking enter event on window when modal window
is closed.
Task-number: QTBUG-35109
Change-Id: I370b52d386503820ac9de21e6d05fd019ca456ec
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
First-level context menu grabs the mouse, so all mouse events are
delivered to it. This menu passes the mouse events to submenus. Any
platform delivers mouse enter/leave event differently when window is
grabbed. This patch unifies event delivery to context menus - it can
block some unwanted events and it emulates fake events if necessary.
This patch can reduce duplicated events and can provide proper enter
or leave event to additional widgets in the context menu. It can also
prevent submenu from unwanted close on Windows and X11.
Added autotest.
Task-number: QTBUG-45565
Task-number: QTBUG-45893
Task-number: QTBUG-47515
Change-Id: I7dd476d0be23afa34e947e54aef235012d173dcf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
If QT_PRESERVE_TESTLIB_PATH is set, then LD_LIBRARY_PATH and
QT_PLUGIN_PATH won't be filtered out for the sub-tests started by
tst_selftest.
Change-Id: Ic43ba9b4d882ee36b2f7495b1c880f26aefd2629
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
The protocol was originally developed by Canonical, currently supported
by Unity and Plasma.
Adjust some tests to use the non-native menu bar when they require it.
[ChangeLog][XCB / X11] QMenuBar uses the unified D-Bus AppMenu menubar
when the desktop environment supports it.
Change-Id: Iea74b40522573bcc4f70168fe7fa2a49b4f3fc21
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The auto.pro file would bail out or skip based on the availability of
the session bus at qmake time. That does not make sense for cross
compilation: the session bus may be available on the target even if it
is not on the compilation host.
Change-Id: I459a518f3411acb39e8dcdad9d32ded1f9b57029
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test fails in distros using GNOME due to
most likely bad usage of native dialogs.
Task-number: QTBUG-51148
Change-Id: I6e539b429266e298ce413565e0191bffa7fbe6bc
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QListWidget uses a set of slots for its selection model that are
connected only at creation time. This patch adds the missing
connections cleanup and setup when a user changes the selection
model.
Task-number: QTBUG-50891
Change-Id: I942bae6c471ea1ae22637d09b96d6fbd422f653f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QLatin1String can be used as a string-view-like type.
When attempting to do so in uic, mid() and at() were
found to be missing. Added the others for completeness.
Use the new functions in uic, for which they were
originally conceived.
[ChangeLog][QtCore][QLatin1String] Added at(),
operator[](), mid(), right(), left().
Change-Id: I4cfe3e9ed1157dedee754b2012d9678fe72b161e
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test was made insignificant for Windows in change
f3939d943e. As the failure is not
reproduceable locally, re-enable it. Also split apart the test.
Task-number: QTBUG-51149
Change-Id: I6a06bdf2369bc3bdbc73dfe4fa416e9d644f8b01
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Ensure that the window is active (as otherwise
QMdiArea::activeSubWindow() returns 0) and add a QTRY_COMPARE.
Change-Id: I7edb01d43fd2635864266614ef9a0e844f76edbf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
If the WHERE clause is used in a query involving multiple tables,
such as generated by QSqlRelationalTableModel, the table prefix
may be necessary to disambiguate column references. It is harmless
if not needed.
Task-number: QTBUG-43320
Change-Id: I39e1ab7359bf748afa8bcd8578220e3abb3ee24a
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Pass modeltest after clear(). Otherwise it fails because more flags
than Qt::ItemIsDropEnabled get returned for the QModelIndex().
Change-Id: I8f11515cc7dc9383f528f785312ffb77b3c2699d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The test was already blacklisted in openSUSE 13.1 and
was found not to work in 42.1 either.
Task-number: QTBUG-51172
Change-Id: I9f8f7b2251a230596a25183dee04ed37824f8ad7
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
A bad test that assumes hard disk being
partitioned in a specific way
Task-number: QTBUG-51174
Change-Id: Ic4d56fbd041444e00bd656372e9190ba07ff2704
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
Some entries were not updated and tests failed to succeed on platforms
which need to deploy content/testdata.
Change-Id: Ieb2b44c375b04cbaaecc1fb2303cc2478b86a100
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
testdata needs to be deployed to temp and current directory
needs to be set to that directory for the test to succeed.
Change-Id: I2dd023af9073d90afbb4ad60fcfb50bb1af4e159
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
WinRT does not allow do connect to the localhost due to security
constraints and sandboxing. Hence we need to disable those
currently.
Change-Id: Idb8c71397a41e5fa5bad9d618dba1bb389e71b9c
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
I had intermittent failures with this kind of code in my unittests,
not sure why yet. This test seems to pass reliably, apart from
helgrind saying it triggers the known race in QFuture::isFinished,
for which Marc is working on a fix.
Change-Id: I4aabe77566dc1af859a016ffe8a4cce19ddf25c8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This allows methods that return an icon name, to sometimes also
return an icon full path (e.g. because the icon was dynamically generated
and stored into a local cache on disk)
Change-Id: Ib01c3955f4b64236463846241d9814b2d0686634
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
I had a doubt about what it would be, turns out it's ReadWrite.
Turns out it's documented, too :-)
Change-Id: I87c2ffc81aa240ffa88c495fe250b022d7fb3c21
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Similar to QMap::equal_range().
Will allow to easily fix inefficient code such as:
foreach (auto value, hash.values(key)) { ... }
[ChangeLog][QtCore][QHash] Added QHash::equal_range()
Change-Id: I6e19e25de632e897ad83d3141d9d07f0313f7200
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I didn't add a transpose(), because r = r.transposed() is
perfectly capable of filling that role, and just as
efficient. Existing API mistakes are no excuse to create
more of them.
[ChangeLog][QtCore][QRect/QRectF] Added transposed().
Change-Id: Ic38721e9028496fc9b50f4d4cef2e7a60532eed8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
After this change, this was the distribution of calls in
QtGui and QtWidgets when the patch was developed for 5.4:
QtGui QtWidgets
move 23 63
copy 23 36
Change-Id: If3f536e52fc242c585e7fa0662049c0657efcc9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This patch makes sure that all events posted using Qt on top of the
GLib event loop have the loopLevel counter incremented.
This is done since Qt depends on the fact that all deleteLater() calls
are issued within the scope of some signal handler (in other words,
triggered by the chain sendEvent() -> notifyInternal2()).
There is a side effect though: in the conditions affected by this
patch, that is deleteLater()s issued within a glib event handler for
example, manually calling processEvents() or sendPostedEvents() with
or without the QEvent::DeferredDelete flag has the same effect, and
deferred deleted events are always processed.
While this is not a currently working feature which the patch breaks,
this side effect seems to be difficult to avoid without separating
sendPostedEvents() and processEvents() into a public and a private
method, in order to detect when they are manually called.
Such change could perhaps be done for Qt6.
An autotest for QTBUG-36434 is also included.
Autotesting for QTBUG-32859 seems to be more challenging in this
respect, due to its dependency on GLib.
Task-number: QTBUG-18434
Task-number: QTBUG-32859
Task-number: QTBUG-36434
Change-Id: Ib89175aa27c9e38bca68ae254d182b2cd21cf7e9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It must clear the previously cached sharedData->staticSelectors,
or else QFileSelectorPrivate::updateSelectors() does nothing and
the newly added static selectors end up being ignored.
Change-Id: If6997664629199be9f00de64c5dd01de2bf0a044
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
On OS X, the default scrolling mode of item views should be
per pixel instead of per item. We enforce this through a new
style hint. On all other platforms, the behavior remains the
same.
It's still possible to override the style hint by using the
regular scroll mode setters. Any subsequent style change will
result in a no-op once the setters have been called and until
the properties are reset.
Some auto-tests had to be update to to take the new behavior
into account.
[ChangeLog][QtWidgets][Styles] Added SH_ItemView_ScrollMode
style hint.
[ChangeLog][QtWidgets][Item Views] Item views scroll per pixel
on OS X now.
[ChangeLog][QtWidgets][Item Views] QAbstractItemView::verticalScrollMode
and QAbstractItemView::horizontalScrollMode are now resettable.
Change-Id: I3f923275c99aa4389323b52fc1c5455fe71f8d73
Task-number: QTBUG-50102
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Labels would use a statically defined font for <pre> blocks.
Use the one defined by the QPlatformTheme instead, through
QFontDatabase::systemFont(FixedFont)
Task-number: QTBUG-50564
Change-Id: I5491bd0defce651bdf809bcbc6a529a900f4959b
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
This makes implementing class methods that enable or disable a feature
stored in a QFlags<> member easier.
[ChangeLog][QtCore][QFlags] Added setFlag method to set or unset a flag
Task-number: QTBUG-27100
Change-Id: Ic602abbbf3100df78f21b7918573744d1bbd18c1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
A malformed bmp file header could specify a negative color table
size. The bmp handler would then return a QImage that claimed to be
valid, but actually was invalid, having an empty color table. This
would cause crash later, e.g. when attempting to paint it.
Change-Id: I7df7c40867557a82dbcee44c7de061226ff232c0
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
To calculate the real count we need to use the actual fixed point
increment and can not use the floating point value increment wass based
on since it might round differently.
Includes auto-test by Gabriel de Dietrich.
Task-number: QTBUG-50153
Change-Id: Ia973088f361c90370fa20bac14a4b8f373b5d234
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Generate the qundo*.qm files for tst_QUndo*::commandTextFormat() in
the current directory (out of source, for a shadow build) rather than
alongside the qundo*.ts from which they're derived (in the source
tree); and remove them once loaded, if that succeeds. (On failure, we
might even want to look at them.)
Task-number: QTBUG-49081
Change-Id: I666985fa3ceb8c25c917b617d6d39141eddebb76
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Rename TestWidget to PaintTestWidget, because this class tests only
whether paint event occurs.
Remove unused variables.
Remove reset() method, because there is no need to reset only one
variable in class method.
Change-Id: I8f442c73598e3431baf2b0433fefc157d3f10ea6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This solves an instance where restoreState() was used when the
dockwidget was already floating and the saved state was also for
a floating dockwidget.
Change-Id: I1fe764ae2a6b0351ae26e33ffec682ad37c944d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The QKeySequence test no longer uses private members (since commit
725bdc3fd2), so that is no longer needed.
Also, remove the unused include from the test.
Change-Id: I4d252bb3efd7282f74c44e48444c23ab51d48ea5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This reverts commit 4c71db7567.
It's too risky for 5.6, we should let it cook in dev for a while
and backport when ready.
Change-Id: I91e677e65d967f29c84a254cd3dffc8bb847b263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
After the commit 7ff655360f, case 4 in SoftExitProcess class relates
to a channelReadyRead() signal instead of stateChanged(). Accordingly,
terminateSlot() is fixed to handle a special case when process is not
running.
Change-Id: Ie0d3284f5d264037d00e4ad6d927c0766be562b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Empty clipRect means "clip away completely", not "no clipping".
Task-number: QTBUG-50719
Change-Id: I6a9dd66130716a921fe9fc245582274e3c9718fe
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
When getting the glyph runs from a QTextLayout with multiple
lines, the glyph runs would be merged if possible, but not their
bounding rects. This was an oversight.
[ChangeLog][Text][QTextLayout] QTextLayout::glyphRuns() now returns
united bounding rects for glyph runs that are merged.
Change-Id: Ibbeaa99ecfc4e82e7965342efdae7c3c2b637343
Task-number: QTBUG-50715
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Resetting focus_window and other internal QGuiApplication variables before
calling setVisible(false) and destroying the platform window means that the
platform window can't reason about whether or not it was the focus window
unless it can resolve that using native APIs. We should let the platform
window take care of resetting the focus window and related states, and
only execute our fallback logic if the plugin doesn't do the right
thing.
We also use QPA to update the state instead of modifying the internal
QGuiApplication variables directly, so that events and signals are
emitted as a result of the reset.
The QLineEdit test gets two added calls to processEvents(), since
assuming that activateWindow() is synchronous is not correct, and
would result in the QMenu resetting the focus window to 0 on destroy.
Task-number: QTBUG-46414
Change-Id: I562788393ed0ffd77d7a4be2279862322f721c1a
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
We have to make sure that the plugins to be tested are located inside
the virtual sandbox / relative to the application binary. Launching via
winrtrunner, a test can find those plugins then. It is not possible to
those via TESTDATA and extract them to temp, as LoadPackagedLibrary only
loads inside the sandbox.
Unfortunately this also implies that running those tests inside Visual
Studio will fail, as Visual Studio copies the virtual sandbox to another
location missing the plugins. For automated testing this should not
matter though.
Change-Id: I70f5ef2d56b3cf526b731fd885f12583c8f6e103
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Parse the requested family before we're looking/saving into the cache,
thus hitting the cached EngineData for:
* quoted family names (eg. QFont("'Arial'"))
* non-simplified family names (eg. QFont(" Arial "))
* substituted family names (\sa QFont::insertSubstitution())
* explicit fallback list, where possible (eg. QFont("Tahoma, Arial"))
This also improves the cache hitting for the font engines in some cases.
Change-Id: I18cdc3e8d669cccec961f84e9b27329402e2b7ed
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Setting conflicts to isSet & DaySection cleared it if we hadn't seen
the day stipulated, even if there had been a conflict (e.g. over year)
before we hit the day-of-week that didn't match the (unset, so
defaulting to) 1st of the month. Explicitly test for conflict and
only set conflicts (to true) if there is a conflict. Added regression
test.
Change-Id: I7363eb66a8bb808d341738d14969039834f50db8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
As a result, this patch eliminates double-buffering in QProcess.
Change-Id: I436faa4a5ffc28ce77f959dd6089bef400ac39f6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Also, bump the TypeInformationVersion field in qtHookData, to notify
the Qt Creator developers that the offset of QFilePrivate::fileName
was changed and dumpers should be adapted.
Change-Id: I71bc5f509b733c0ab3430cd47ff08961f0388839
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We depend on the assumption QFontCache::findEngine(key) for key.multi=1
returns a font engine of type QFontEngine::Multi;
guarantee that by checking it in a single place.
Change-Id: I287da4fd62deb22fc5520cde5b0505bc44547609
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When the window container already has a window handle, allow embedded
windows to use this handle as a parent. This change will allow proper
window stacking and clipping.
Task-number: QTBUG-50477
Change-Id: I8d656ecb99e0c42ae7a7ac461e5e5b5d801f5493
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
When we want to use qtTrId function instead QApplication::translate in
generated files it's not possible to use custom function with presented by
the --tr argument due to signature difference between qtTrId and
QApplication::translate function.
With this argument present, uic will generate qtTrId function with second
argument empty. When used together with --tr parameter it will use
presented function instead.
Change-Id: I0d986e4ea25ce58917fd9a2866b1eac0a4671502
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
This test ensure that a connection made to either an invalid host or an
unreachable host fails properly.
Task-number: QTBUG-47452
Change-Id: If31d23d815e496fc21ef2e1e19c34c2723bd3504
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By default, the read chunk size is QIODEVICE_BUFFERSIZE and the write
chunk size is 0 (which means that we don't use the internal write buffer).
Derived classes may override these values to define the size of
QIODevice's write buffer or to optimize the read buffer use.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: Ib732bc94be8da8a5514a6e5dcc04445895f130d8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some sequential devices allow data to be partitioned into several
channels that have the property of independently sequenced delivery.
Supporting such devices uniformly requires a unified API which provides
the user with a uniform concept of multistreaming.
This patch is based on QProcess's multiplexing model and introduces
the following features:
- ability to get the number of channels;
- multiple internal read/write buffers;
- channel selection functions;
- notification signals on channel activity.
To keep the source code compatible with single-channel implementations,
introduce a private class that references the current read buffer and
hides multistreaming internals from the user.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added multistreaming to QIODevice.
Change-Id: Idcaa6a618927c101c4c7284d2a633913be6a6ee2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Uses a time derived via .toUTC() to ensure the .toLocalTime() comes
out at the time we expect.
Task-number: QTBUG-49008
Change-Id: I2005127929c7eab1b7a3cbaba8d21df8c9585d17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Make it possible to pass an optional root widget to dumpAllWidgets().
- Add option to output size constraints of widgets/windows.
- Output normal geometry of top levels.
Change-Id: Ib48809d070c5721fe4688a2ad39cb99f286618de
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Remove several test from black-list - they do not seem to fail anymore.
Change-Id: Idb7d6925a4fdea9b47d963e33a455af0afb7b432
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This allows TeamCity to parse realtime test-results instead of using
post-build XML Report Processing. This does not support logging of
benchmarks.
[ChangeLog][QTest] Added a new logging mode that allow test-results to
be parsed on-the-fly when using Jetbrains TeamCity as CI-server. This
mode is enabled by using the -teamcity option on the command-line.
Change-Id: Ie730beb643043eb0f448f99abe6c0b5ac48aaf03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime::toString for Qt::TextDate unconditionally uses the system
locale (because QDate::shortDayName and QDate::shortMonthName do).
Setting the default QLocale has no effect. If you ask me, those two
QDate methods are buggy, but they are documented that way.
Change-Id: I408dcb81ba654c929f25ffff1427366b04da5a43
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both constructors were taking a pointer, so they participated in
overload resolution along with QTextDocument and QTextFrame pointers.
Instead, make them take references and move them to the private section
of QTextCursor. That necessitated adding a method to QTextCursorPrivate
to access that private constructor from non-friend classes.
Change-Id: I7e6338336dd6468ead24ffff1410e3bc534d77dd
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
msvc2015 reintroduced a couple of functions from the win32 API
towards WinRT.
Enable usage of those and simplify the file system engine.
Furthermore update the autotests.
Change-Id: I9eafffba0ddfd05917c184c4a6b9e166f86d71d9
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
It's possible to configure an interface so that it isn't the case. I have
no idea if this is a valid scenario, but the unit test shouldn't enforce
that.
ip addr can report:
inet 192.168.1.1/32 brd 192.168.1.255 scope global vlan0
valid_lft forever preferred_lft forever
Change-Id: I8de47ed6c7be4847b99bffff141c337575760bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
The important one is EET, for the benefit of our CI system; but other
European zones and the USA's coastal zones likely have enough hackers
in them to make this worth checking.
Change-Id: Idcc703bce29808e1a0a6279680cc8d3cbed38dac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Time zones change on the whim of politicians. Consequently, we can
seem to be in CET/CEST or on UTC (because we tested sample dates when
our zone coincided) when we aren't (i.e. we're in a materially
different zone at the time probed by some particular test). Make the
initialization of the globals that test this more robust against
governmental meddling and document the unfixable problem with Algeria:
a DST transition *on the epoch*.
Change-Id: I17c5c81d339b80af12f4ffab367e28052dd6c2fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are several European time zones; the only one relevant to the
tests here is CET. They won't work with WET, GMT or EET. So name
them and related variables for CET, not for Europe.
CET's summer-time isn't called CST; and the (existing) spring forward
test works only in CET/CEST, not elsewhere in Europe.
Change-Id: I55c7544bf792de7495700b749b935ec534831d8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using QUrl::PreferLocalFile we do want to strip the leading slash,
as toLocalFile() would do as well.
Behavior change by means of an example:
QUrl url(QUrl::fromLocalFile("C:/file.txt")
url.toLocalFile() --> "C:/file.txt"
Before:
url.toDisplayString(QUrl::PreferLocalFile) --> "/C:/file.txt"
After:
url.toDisplayString(QUrl::PreferLocalFile) --> "C:/file.txt"
Task-number: QTBUG-41729
Change-Id: I7d425541f6077ebcf3fcf46feeb7e0f03a0d7fe2
Reviewed-by: Dominik Haumann <dhaumann@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In German layout, "Ctrl+/" is "Ctrl+Shift+7".
Change-Id: I50f3d77c4c76e7eb7cffe31283a3b73074324fea
Task-number: QTBUG-47122
Task-number: QTBUG-50360
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
1. Use qrc for test data so that it can be found on all platforms.
2. Skip a test which does not work on platforms where show() implies
showMaximized(), as it depends on the window size being 150x150.
3. Skip test for hover event which depends on having a valid
mouse cursor position.
4. Skip a couple of tests that fail on some Android devices.
It's not worth spending a lot of time investigating this at the
moment.
Change-Id: Icb2b7f1d82981546a2154a76535b95606d7f40da
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
[ChangeLog][Important Behavior Changes] Starting with Qt 5.7, Qt
requires a C++11 compiler with support for C++11 atomics. This affects
user code too: Qt headers no longer compile with a C++98 compiler. The
minimum compiler versions for this release are:
* Clang 3.4 (found in XCode 5.1)
* GCC 4.7
* Microsoft Visual Studio 2012
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f496ea9363f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
The test inserts strings "0" ... "9" into the text document,
takes the half of resulting document's size, makes half of
lines invisible and compares sizes. On OS X 10.11 after inserting
"4" the width changes, so making "4" invisible also reduces the width
and QCOMPARE(currentSize, previosHalfSize) fails. Instead of digits,
insert the same string "A" 10 times.
Change-Id: Ie88a0442703f98949cea9bcdb694cecee59695f3
Task-number: QTBUG-49848
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When the remote peer closed the connection, a read notification needs
to always be emitted, otherwise the higher layer does not get the
disconnected signal. From the other side, underlying QAbstractSocket
object could temporarily disable notifications from the engine at
any time. To avoid possible blocking of the socket, take a pending EOF
into account when the read notifications are re-enabled.
Change-Id: Iac9d4e2f790530be3500baf5a2000f1f63df5cc2
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
This adds a way to resume reading from a stream after a ReadPastEnd error.
This is done by introducing a stream read transaction mechanism that keeps
read data in an internal buffer and rolls it back on failure.
[ChangeLog][QtCore] Added QDataStream startTransaction(),
commitTransaction(), rollbackTransaction(), abortTransaction()
functions to support read transactions.
Task-number: QTBUG-44418
Change-Id: Ibf946e1939a5573c4182fea7e26608947218c2d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There are three deprecated language codes that Java still uses for the
locale so we need to account for these inside QLocale by mapping them to
the right language.
Task-number: QTBUG-49632
Change-Id: Ib66b3f2763e085f7384228f2490b048bb56be259
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Added a new overload function that allows the developer to
specify the desired precision. Until 6.0, it will require
the symbol and precision to be passed to it. Once Qt is at
version 6.0, it will replace the overload function that
requires a value and optionally a symbol.
[ChangeLog][QtCore][QLocale] Added an overload for toCurrencyString()
that allows the decimal precision to be specified.
Change-Id: I1fb7dde3583f46de2ed20ec2a7abaeca23a903ef
Task-number: QTBUG-46595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When closing a popup dialog using a shortcut, when the popup
was originally opened using a shortcut, the closing-shortcut
would interfere with the state of the first shortcut, and we
ended up sending a key event for the original shortcut.
Task-number: QTBUG-50360
Change-Id: I62e5ddb9ca43b28519ede629775bc0d7598dccc4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Make a private member mutable to enable default assignment operator.
Change-Id: I1216875c186ed800e07c6b41a5bae18c3b71b2fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Introduce a transaction mechanism that gives the ability to read the
data atomically. Current implementation supports transactions for both
types of devices. For sequential devices, it records the whole input
stream during transaction. For random-access devices, device position
is saved when transaction starts. If an error occurs, the application
may be able to recover the input stream by rolling back to the start
point.
Also, QIODevice::peek() was rewritten to make use of transactions
internally. The replacement of QIODevicePrivateLinearBuffer by
QRingBuffer is closely entangled with that, which makes it unfeasible
to do separately.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added QIODevice's startTransaction(),
commitTransaction(), rollbackTransaction(), isTransactionStarted()
functions to support the read transactions.
Task-number: QTBUG-44418
Change-Id: I3564b343ebeeaaf7c48a1dcdb7ef0a7ffec550f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When QDateTime::addDate() and friends sanitize their end-state, they
were using the DST status of their start-state (if known) to control
it. This lead to misguided results and, in particular, inconsistent
results given that a raw-constructed QDateTime comes into being
ignorant of its DST, while a .toLocalTime() one knows its DST.
Furthermore, the code to do this was triplicated, tricky and poorly
explained. So pull it out into a local static function and explain
what it's doing, and why, more clearly and only once.
Task-number: QTBUG-49008
Change-Id: Ia4bb3c5e9267fff8bb963ea705267998218ed623
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This partially reverts commit e486d69133.
It broke too many users, even though all of them deserved to be broken.
The new functionality will be provided by differently-named functions,
where possible (problem: equality operators).
I did not revert the fix for the off-by-one error in
tst_qtextdocumentfragment.cpp.
I also didn't revert the change in the inequality relational operators,
since for all strings s1, s2 and s2' where s2' is s2 truncated at the
first NUL, s1 < s2 ⟺ s1 < s2' (since NUL < c for any c != 0), and,
trivially, for ≤, >, ≥, too. This does not hold for = and ≠, of course,
since "foo\0bar" ≠ "foo".
[ChangeLog][Important Behavior Changes][EDITORIAL] Reverted: All
conversions from QByteArray to QString now preserve embedded NULs...
Change-Id: If4b47048b39ae5be6ed08e6d91809626a67ea7f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Whether or not to call XInitThreads() doesn't apply since Qt-5.0's switch to XCB.
Change-Id: I5f1e5e664a251c98af6357c87fc9a6bb03a46ce3
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
CMake newer than 2.8.12 automatically adds the
appropriate flag, but CI still runs 2.8.11.
Change-Id: Ie61375f2feb54a92c9d8f0ed6ad5227a67343bc5
Reviewed-by: Stephen Kelly <ske@ableton.com>
When recursing over the windows, the code did not take into account
that EnumChildWindow enumerates grand children as well. Exclude
those by checking for the direct parent in the recursion so that
the hierarchy is printed correctly. Add more information about
class and module and rearrange the output a bit so that the window
title is more prominent.
Task-number: QTBUG-50206
Change-Id: Iffb12c44eda9d09da5eb14a8405aee52ed3aa849
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Widen its interval (to work in more TZs) and test spring as well as
autumn. Anywhere that does have a DST transition probably has it
between August and December; and there's no benefit to using a narrow
window.
There's also no sense skipping the test if we don't know there's a DST
transition: the test should still work, it just won't be testing
anything (about DST transitions).
Combine date and time checks into date-time checks, so that, when one
of them fails, QCOMPARE lets us know how the other changed, too.
Task-number: QTBUG-49008
Change-Id: I145b939ffef0dd0b54fd0e3cdf72a159c57ec00b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just fuzzily equal. The fuzzy comparison fails for infinities, since
the expression p1 - p2 where p1 = p2 = infinity is NaN. And NaN
comparisons are always false.
As a nice side-effect, we don't do the more expensive computation of a
multiplication if the two numbers really are equal.
Task-number: QTBUG-50036
Change-Id: I11f559ef75544c50b3f8ffff1420cec7c7273295
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This reverts commit 618e2cc081. The
original commit has a section of code that I failed to review properly
and is of questionable functionality.
Change-Id: I61c53d7b8b2aa7c3312292b017a18aba7da11bc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed as of commit v5.6.0-beta1~483 (Add an automatic use of
the ELF-versioned QtCore symbol, 2015-10-20). Even if a translation
unit only contains
#include <QtCore/QString>
int main(int,char**)
{
return 0;
}
it must link to QtCore which provides the qt_version_tag symbol.
Change-Id: I827c0a7403320e7e5b384d8608face20fcecdaea
Reviewed-by: Stephen Kelly <ske@ableton.com>
If CountedStruct is passed a GetSenderObject object,
it will attempt to call a member on it from within
its own destructor.
That works usually quite well, but in this test case,
which tests for function object leaks when a connection
is torn down because the sender object is destroyed,
the destruction of the CountedStruct happens when all
connections are severed in ~QObject. At that point,
what used to be a GetSenderObject instance no longer
is one and the call into one of its member functions
invokes undefined behavior.
Fix by making QObject::sender() public by a using
declaration instead of a wrapper function.
Found by UBSan:
tests/auto/corelib/kernel/qobject/tst_qobject.cpp:6007:104: runtime error: member call on address 0x7ffc6e7538b0 which does not point to an object of type 'GetSenderObject'
0x7ffc6e7538b0: note: object is of type 'QObject'
Change-Id: Ia973140037b3c1b5a670a8a3949d09b956f40349
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Off-by-one error: we should have calculated whether the current year is
leap, not the next year. This affected any 53-week leap years.
Task-number: QTBUG-50273
Change-Id: I134ce5db2f82468585ffffff14264cb9f12998fd
Reviewed-by: Martin Klapetek <mklapetek@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Don't try to run test_interface when Qt is configured without QtWidgets.
Change-Id: If6c376c250215c1d639b06881d16c0141091f288
Reviewed-by: Stephen Kelly <ske@ableton.com>
Binding a reference to the nullptr is undefined
behavior.
Just skip that particular test when 'ptr' is null.
Found by UBSan:
tests/auto/corelib/tools/qsharedpointer/tst_qsharedpointer.cpp:258:32: runtime error: reference binding to null pointer of type 'struct Data'
Change-Id: I125588b9d269a6f76716d660d03142f409513885
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Don't cast a QDialog to a subclass it is not.
Fix by creating it as the required subclass in the
first place.
Found by UBSan:
tests/auto/widgets/dialogs/qdialog/tst_qdialog.cpp:203:20: runtime error: downcast of address 0x2b5f5000ad40 which does not point to an object of type 'DummyDialog'
tests/auto/widgets/dialogs/qdialog/tst_qdialog.cpp:203:46: runtime error: member call on address 0x2b5f5000ad40 which does not point to an object of type 'DummyDialog'
Change-Id: I63ae7e782bda6a78d11af5c2bc2f7d88aacd0ac0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If QObjectPrivate::declarativeData is set, it is
in various places in Qt expected to point to a
QAbstractDeclarativeDataImpl, from which ownedByQml1
is unconditionally read.
In noDeclarativeParentChangedOnDestruction(), the
declarativeData pointer is, however, set to a local
QAbstractDeclarativeData instance, which, being an
empty class, has size 1 and alignment 1.
Depending on the compiler's idea of bit field order,
this code either read uninitialized data from the
dummy object, or else some random stack memory outside
any (valid) object.
What caught UBSan's attention, though, was the
difference in alignment between the two classes:
src/corelib/kernel/qobject.cpp:917:9: runtime error: member access within misaligned address 0x7fffc9cf706f for type 'struct QAbstractDeclarativeDataImpl', which requires 4 byte alignment
Fix by providing a properly initialized object of the
correct type.
Change-Id: Iae83a949ee5a7bc98df13e35ea614c063085fa13
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This patch includes setup of class member 'msg' in
QDBusMessagePrivate::toDBusMessage() to be able to get the
serial after message sending.
Testcases for comparing the 'reply serial to' with the 'serial'
are included.
Task-number: QTBUG-44490
Change-Id: Iae7c48f5b0c70a6c5ae500904072b38b46dfd876
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't pass around meta-type IDs in QMetaType::Type
variables. It leads to reading values from an enum
variable that are invalid.
Fix by passing the IDs around as int.
Found by UBSan:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:408:5: runtime error: load of value 4028, which is not a valid value for type 'Type'
Change-Id: Idd106ee3d7960fe3d8fefc0fc5830fc22d38a513
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The reinterpret cast from a QTcpSocket → QAbstractSocket → QIODevice
to MyIODevice → QIODevice was undefined.
Fix by simply instantiating a MyIODevice, which must then inherit
from QTcpSocket, of course.
Instead of fixing the class name in the overridden setOpenMode()
method, simply make the base class' implementation public with
a using declaration.
Found by UBSan:
qtbase/tests/auto/corelib/io/qiodevice/tst_qiodevice.cpp:84:22: runtime error: member call on address 0x7ffcca2d23f0 which does not point to an object of type 'MyIODevice'
0x7ffcca2d23f0: note: object is of type 'QTcpSocket'
Change-Id: I939b3548949b9b5765df4a6cc81875e169fd69dd
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
openStandardStreamsFileDescriptors and openStandardStreamsBufferedStreams
fail on OS X: lseek somehow works on sequential streams (standard streams)
but QFile has pos() == 0 (since it's sequential).
Change-Id: I6a6161c012a91de189f59c533880fb8fe7a66d37
Task-number: QTBUG-49841
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
While a native dialog is open, the application message queue is
handled by the native event loop which is external to Qt. In this
case, QEventDispatcherWin32::processEvents() does not run and socket
notifiers will not be activated. So, this patch moves the notifier
activation code into the window procedure, which enables socket
event processing with native dialogs.
Task-number: QTBUG-49782
Task-number: QTBUG-48901
Change-Id: Icbdd96b2e80c50b73505f4fe74957575b83d6cf1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
qstrtod() used to accept trailing junk until libdouble-conversion was
introduced and we need this behavior in order to implement EcmaScript's
parseFloat() correctly. The QString and QByteArray methods should not
accept trailing junk, though.
Task-number: QTBUG-50131
Change-Id: Ide922da0d65b2576be2c9f47f6053057eff77994
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When a high-priority event is posted in overrided
'QStateMachine::beginSelectTransitions', the event may be remained in
event queue, and be not dispatched until another event posted.
Change-Id: Ifda288d9c00ac7985e426b9cc02bda382ebaac35
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
This reverts commit 56aad2ad60.
QWidget::mapFromGlobal() does not work correctly when the widget is
a child widget of another widget embedded into a QGraphicsView with a
transformation (scaling/rotation). It starts applying offsets going
up the widget tree (just as mapToGlobal) until it hits the embedded widget
not taking into account the transformation.
It would need to go in from to top to bottom or better be reimplemented
such that a QTransform for mapping coordinates from/to global is determined
which is then applied in reverse.
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Change-Id: Iadeb891d793be1938c64942bfbf38d541a281c33
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
This test seems to be quite broken on OS X: qWaitForWindowExposed returns
too early (while no window is on screen) so gestures can not be dispatched
QApplication::topLevelAt(pt) - returns null.
Use qWait + isExposed combo instead (similar to qWaitForWindowExposed, but
there is no isExposed test before the loop).
Change-Id: I85fbd773ccce0ca92b2dceb1749d67ef767aa0cf
Task-number: QTBUG-49849
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When using cipher algorithms with forward secrecy an ephemeral key is
used to generate the symmetric session key. Beside the SSL certificate's
key, this ephemeral key is of cryptographic interest.
The ephemeral key is chosen by the server side - currently statically in
the Qt implementation - so it is only of interest on the client side to
check it. Therefore the ephemeral key is the null key if the connection
is set up in server mode or a cipher without forward secrecy is used.
Change-Id: If241247dbb8490a91233ae47f2b38952c6591bf4
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
The #if had a condition that was needlessly hard to understand;
and was widely separated from its #else clause.
Change-Id: I43f4282993f4f2e8c4b5ad07dc2c2e06a6b95aa9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This often happens in applications. Besides, we are expecting at least a
call to RequestName to happen.
Change-Id: Ifd2454ffba454fd591d0ffff1425a84563267d19
Reviewed-by: David Faure <david.faure@kdab.com>
To retain a bit compatibility with applications developed in the last 9
years that expect that QDBusConnections won't process their events until
the event loop runs, we now suspend the handling of incoming messages
in the two default buses (and only in them) and resume when the event
loop starts. This is required because the new threaded QtDBus would
otherwise process incoming messages that the application didn't expect
it to.
For example, if the application first acquires names on the bus and only
after that registers objects with QtDBus, there's a small window in
which the name is acquired and visible to other applications, but no
objects are registered yet. Calls to those objects may be received,
would then be processed in the QDBusConnectionManager thread and fail.
The work around is to disable the actual handling of method calls and
signals in QDBusConnectionPrivate::handleMessage. Instead, those
messages are queued until later.
Due to the way that libdbus-1 works, outgoing method calls that are
waiting for replies are not affected, since their processing does not
happen in handleMessage().
[ChangeLog][Important Behavior Changes] QtDBus now uses threads to
implement processing of incoming and outgoing messages. This solves a
number of thread safety issues and fixes an architectural problem that
would cause all processing to stop if a particular thread (usually the
main thread) were blocked in any operation. On the flip side, application
developers need to know that modifications to a QDBusConnection may be
visible immediately on the connection, so they should be done in an
order that won't allow for incomplete states to be observed (for
example, first register all objects, then acquire service names).
Change-Id: I39cc61d0d59846ab8c23ffff1423c6d555f6ee0a
Reviewed-by: David Faure <david.faure@kdab.com>
- Instead of QString::split()-ing the path, just to inspect the
first item in the list returned, simply find the location of
the first separator and work with that.
-> saves creating a QList, and its QString elements
-> saves attempted detaches of that list when calling
first()
- When extracting the user name, don't do it in a QString, do
it in a QStringRef.
- When constructing the result, don't use QString::replace(),
use QStringBuilder with a QStringRef into the original string.
- Eradicate the out parameter, it is easily calculated from the
return value.
- Don't calculate userName on VXWORKS and INTEGRITY, where it
is not used. Requires a different #ifdef sequence. Fixed
preprocessor directives' indention as a drive-by.
Costs 84b in text size on optimized GCC 4.9 Linux AMD64 builds.
Change-Id: I61f1e8d558db7fb0c5c1170bdfd6f5ac1f1a9e62
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In setStretchLastSection we restore a default section size
if we no longer use stretch. That size was however not
sufficient - we should restore the actual size.
Furthermore we should also always stretch the last section
(last visible index) - and not leave a section with a
huge size and stretch another.
This patch refactors stretch handling and keeps track
of the last section and its size in eg. moveSection,
swapSection, hideSection, showSection etc.
There is an auto test showing and guarding its behavior.
[ChangeLog][QtWidgets][QHeaderView] Fixed some issues
(e.g QTBUG-39010) with restoring of section size after
a section is no longer the last visible section
(in stretchLastSection mode).
Task-number: QTBUG-39010
Change-Id: Id47075b5a9dfeb250027374ecbd10eb8babbf9ef
Reviewed-by: David Faure <david.faure@kdab.com>
We already include <utility> in <qglobal.h>, so we might
as well provide a qHash() overload for std::pair.
[ChangeLog][QtCore] Added qHash(std::pair), defined in
<QHashFunctions>.
Change-Id: I0f61c513e82e05ce9d2e56bcf18f3be9e2da4da9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This was documented, but not what the code did.
Task-number: QTBUG-48529
Change-Id: I4849778c61dcae13be27c62b24717693c0c07d78
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be used in QTextStream to speed up padding processing.
[ChangeLog][QtCore][QString] Added resize(int, QChar) overload.
Change-Id: Id51f8cdacb167310157100b05cacf20e9a5d2716
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test produces compiler warnings in release builds:
tst_qgraphicswidget.cpp: In member function 'void tst_QGraphicsWidget::setTabOrderAndReparent()':
tst_qgraphicswidget.cpp:1521:89: warning: 'w2' may be used uninitialized in this function [-Wmaybe-uninitialized]
tst_qgraphicswidget.cpp:1536:88: warning: 'w1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Use arrays instead of the variables w1,2... and rewrite the helper
function compareFocusChain() to work on iterators allowing to
remove some temporary lists. Also return error messages in a
QByteArray ready for the Q[TRY_]VERIFY2 macros.
Change-Id: I43466921af59521d1faf00b75fe943508418abb3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
/home has been observed to be writable on some CI machines.
Add checks verifying existence and correct permissions.
Change-Id: Ie0f952e20d0d8eb0b57234eea2e2ecb78f5a7b58
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If the variant contains a known json type (value, array, object or
document), simply unwrap those. In the case of the json document
wrap the contained object/array into a QJsonValue.
This should be the expected behavior, and makes more sense than
returning a null QJsonValue.
Task-number: QTBUG-41234
Change-Id: Id084fc11220d51aaf78b7694fd0ebef1411f5c51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Path normalization should happen only when NormalizePathSegments is set.
Use a less intrusive fix for the setPath("//path") issue that
commit aba336c2b4 was about.
This allows fromLocalFile("/tmp/.") to keep the "/." at the end,
which is useful for appending to the path later on (e.g. to get "/tmp/.hidden")
Change-Id: Ibc3d4d3276c1d3aaee1774e21e24d01af38fa880
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the environment variable is set, but points to a non-existing directory,
the user would get a warning about chmod failing. Better be clear and
warn about the fact that the directory itself doesn't exist.
Also warn if $XDG_RUNTIME_DIR points to a file rather than a directory.
Task-number: QTBUG-48771
Change-Id: If84e72d768528ea4b80260afbbc18709b7b738a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This partially reverts commit 025d6a778c.
Change-Id: I7b964b0d598abe46137c22177fe2b5dcca5bb812
Task-number: QTBUG-49831
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Commit ed0c0070 introduced qt_subtract_from_timeout but used it
incorrectly in several places.
Change-Id: I80ea16088707929a45d5a61ec6f3370f8e63d1cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When the byte sequence for a BOM occurs in the middle of a utf8 stream,
it is a ZWNBSP.
When a ZWNBSP occurs in the middle of a utf8 character sequence, and the
SIMD conversion does some work (meaning: the length is at least 16
characters long), it would not recognize the fact some charactes were
already decoded. So the conversion would then strip the ZWNBSP out,
thinking it's a BOM.
The non-SIMD conversion did not have this problem: the very first
character conversion would already set the headerdone flag.
Change-Id: I39aacf607e2e068107106254021a8042d164f628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was improved by:
- Use QCOMPARE instead of QVERIFY
- Use QTRY_ macro instead arbitrary qWait
- Use longer time line
The test executes faster and it should be less vulnerable to
an unreliable timer.
Change-Id: I92675015a6251b47eaf20b0fc916f3a36b52d783
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test run faster and it less vulnerable to an inaccurate time.
Change-Id: I19475095395dcf1e6d47fdbba5eeffabab1fc7b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Now the test is less fragile to time and it executes 4s faster
Change-Id: Id3eb8ed2c03317e7d2f2c3cd17f889a8d8e7e5b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test still can fail because 1s is quite a short time.
Change-Id: I6f42c182f2932d5a053f6a69667210529c9a7697
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
- Do not save geometry when going from maximized->fullscreen
- Use SW_SHOWNA instead SW_SHOWNOACTIVATE as otherwise the
maximized geometry is restored.
- Add a test for Windows.
Task-number: QTBUG-49709
Change-Id: Ic81e7398ee90d499a50b02192a45cb09276a2105
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Adds NEON version of interpolate_4_pixels used by smooth upscaling, and
bilinear sampling.
The SSE2 version is reordered to match the NEON version so they have
the same order of operations and a faster version that loads directly
into vector registers.
Testing is extended so we have a test of smoothness that can catch more
possible mistakes.
Change-Id: I0de4aecf5cb79468e7c8f19f421aa24b2955547c
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
Strings do not have to be overly specific to test parser function.
Change-Id: I345dfec7fb4b8004661f6757cfd53b428ad87b6b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Previously, the geometry stored for floating dock widgets
in QPlaceHolderItem::topLevelRect and QDockAreaLayoutInfo::saveState()
included the window frame (frame position/content area size).
This does not work in the case where a floating dock widget is deleted
since the geometry is determined after reparenting the widget when the
frame geometry is no longer available. Change the behavior to store
the geometry excluding frame to avoid such problems and adapt
QDockWidgetPrivate::setWindowState() accordingly.
Task-number: QTBUG-49832
Task-number: QTBUG-45780
Change-Id: I84b5c80df6e1c9e738bbb1407b9047cc84719ce0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test is marked as blacklisted on 10.10, and it
is found to still fail in 10.11.
Task-number: QTBUG-49834
Change-Id: Ibddb1af6b61f3fca2b2aea18102bbaa5390a40d3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts commit 9a6a58a95a,
which was a work-around for a qmake bug, now fixed.
Task-number: QTBUG-19393
Change-Id: Id467bb5907a88f03eac0e29a90f4ff7e97045423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is used throughout Qt and resolves to
operator op(QChar, QChar)
This test makes sure we don't break those
use-cases as we fix missing relational
operators as found by tst_QStringBinOps.
In the other direction, 0 op QChar is
ambiguous, due to op(const char*, QString)
etc, so only test the uint op QChar case.
Change-Id: Ifae7fb65bf3269583898cfea3fc6c95547c75122
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Added method
setCreateProcessArgumentsModifier to QProcess on Windows to enable
users to intercept and modify CreateProcess parameters.
With such a modifier, calling code can decide whether to inherit
handles, modify the STARTUPINFO struct, and pass its own
combination of process flags to CreateProcess.
Task-number: QTBUG-390
Task-number: QTBUG-6917
Task-number: QTBUG-9350
Task-number: QTBUG-24619
Change-Id: I14757dbbacfebb1c89f52402d36fba0ba9c45f3a
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When a QLineEdit is readonly there's a discrepancy between key press
events and shortcut override events. For instance, presses Ctrl+C
copies the text unless there's also a shortcut for the same key sequence.
In this case, the shortcut override event is not handled, and no text
is copied. Fix it by splitting the handling of shortcut override
events between "read only" access (copy, select, etc.), which still
makes sense on a read only line edit, and write access (paste, ...)
which doesn't.
[ChangeLog][Important Behavior Changes][QLineEdit] QLineEdit will
now accept certain shortcut override events even if it is read only.
Change-Id: Ie5b048259b99a1eff0581129e3ad97f27a88fe86
Task-number: QTBUG-21217
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The documentation says that we scroll one pixel, but changing the
behavior in 934f062203 to do that
was not well received.
People were relying on the undocumented behavior - and the new behavior
was considered to be a regression. (Nobody called setSingleStep since
Qt in many cases provide a reasonable singleStep - which implied that their
programs scrolled with 1 pixel which was quite slow). Furthermore getting
the old behavior (auto set of single step) was nearly impossible.
However the revert (done in 0e69230d02)
gets us back to QScrollbar::setSingleStep not working in pixel scroll mode
(even without it being documented - but we should also have a working API
rather than documenting that it is not working)
The previous approach was directly prevented Qt from changing
single step (on e.g resize) at all. This patch only prevents Qt from
changing when a user explicitly has called the function
QScrollBar::setSingleStep (in pixel scroll mode).
That is we expect that calls to setSingleStep means that the user actually
wants to set the singleStep and doesn't want Qt to control that value.
Furthermore it is possible to switch back to the automatically adjusted
singlestep with QScrollBar::setSingleStep(-1).
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
when scrollMode is set to scrollPerPixel, it is now possible to
change the single step. Qt will automatically adjust the single step
until setSingleStep is called. When setSingleStep is called it will
however respect the set and stop doing automatic changes of the value.
Calling setSingleStep(-1) will switch mode back to automatic adjust.
Task-number: QTBUG-7232
Change-Id: Ibfe0caa9751d3bcc11bfc6e0654a3d1ac35ac8ae
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If the LHS is detached and has existing capacity that is large
enough to hold the RHS, re-use the memory instead of allocating
a new buffer and throwing away the old.
Change-Id: I53d42825da92c264c7301e8e771cba9fb35c321b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][State Machine] Added constructor overload that
takes a pointer-to-member for the QSignalTransition.
Change-Id: I80ac6e16d0edf7d2ab09882b6f6db4cbd73364e1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
It should compile, since the std::shared_ptr does.
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that would cause a
compilation error when constructing a QSharedPointer of a const type
when the type derives from QEnableSharedFromThis.
Task-number: QTBUG-49748
Change-Id: I8de47ed6c7be4847b99bffff141c84f5e0b6bea8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In a QPair, the member names {first, second} have no semantic
value. A simple struct, while not as featureful as QPair, can
be given meaningful member names, {rect, index}, in this case.
Change-Id: If1e289ecee82a1cb020ac3a854efd2ec1096493b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The qt_poll function calls recv to query whether fds marked by select
as readable should be marked POLLIN or POLLHUP in the pollfd structure.
On many platforms such as QNX this requires extra link-time libraries
which were not previously required by QtCore.
While the qt_poll function is intended as a fallback mechanism only for
those platforms which do not implement poll natively, the function was
compiled unconditionally whenever QT_BUILD_INTERNAL was defined, e.g.
in developer builds.
Additionally the function was included on those systems that define poll
in system headers so that configure determines build-time availability,
but do not define _POSIX_POLL > 0 or indicate POSIX:2008 compliance via
either the _POSIX_VERSION or _XOPEN_VERSION macros. On those systems a
sysconf query for _SC_POLL was performed to determine at runtime whether
to call the system poll or qt_poll.
Both of these cases are in fact counterproductive. In the first case the
sole consumer of the function is a single manual unit test. In the
second, to my knowledge no platform requires the runtime fallback.
Despite that, we were forcing an extra dylib in both cases.
Both cases are fixed by 1) moving the implementation into its own file
for the unit test to include and 2) dropping the dynamic fallback if
configure determines availability of poll at compile-time.
This also reverts commit 1377709711, which
added -lsocket for QtCore on QNX.
Change-Id: I2dd10695c5d4cac81b68d2c2558797f3cdabc153
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QColor always uses unpremultiplied alpha, but the new QImage methods
were based on the QRgb versions which might be either. This patches fixes
the two new methods so they treat QColor alpha correctly.
Change-Id: I78a5b875ad4e78ad7fde3b811c6187482b4f6d15
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This follows up 130c2baa93.
Change-Id: I2f6c9b4f995af427cec9a2162b782039debf8564
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The file exists but it isn't listed in TESTDATA. This is only a problem
when the target is a another system as is the case with Qt for QNX.
Tests fail because the file isn't deployed.
Noticed this while testing the changes for custom spacing of JSON
output.
Task-number: QTBUG-47437
Change-Id: I098c34d2ab9027956d9233b24f30b5192ecfe96f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This function is introduced to safely provide poll(2)-like semantics for
socket multiplexing on Unix-like platforms. For platforms where no poll
system call is available, an implementation based on select(2) is provided.
Change-Id: I320e97dae5924316675a74d1897c48cae292ac6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was extremely inefficient, and QCollator
can provide the same functionality in a much better
and faster way.
Task-number: QTBUG-30902
Change-Id: Iaf5dbe587d9a6ebca26885259fdee74a29d3c84f
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVariant was using QColor::name() to convert a color to string, which by
default loses alpha value. The patch is fixing the problem by always
including the alpha value in the string when required.
[ChangeLog][Core][Variant] QVariant(QColor)::toString() uses
QColor::HexArgb format when the alpha component is different from 1.
Task-number: QTBUG-37851
Change-Id: I887460c1ea151180ba99d64dd873ba9d6e2268f2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In QMenuPrivate::hideMenu(), delay clearing of 'causedPopup.widget'
to after the QMenu::close() call, so that it is still accessible
in QMenu::hideEvent() which calls QMenuBarPrivate::setCurrentAction(0)
if the caused widget is a QMenuBar.
Task-number: QTBUG-47377
Task-number: QTBUG-49592
Change-Id: Idbda48e918dae799afea84068a60d7383d7b4971
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The platform window geometry can be misleading until it has
been properly positioned and
QWindowPrivate::resizeEventPending has been cleared.
Task-number: QTBUG-49588
Task-number: QTBUG-48396
Change-Id: Ie065f62478fc8522a9ad51391bb897510afa5aad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove unused ctors and dtor, add Q_OBJECT, indent,
privatize slots, don't check for nullptr before
delete'ing a pointer, and add one override keyword.
Setting test_box (a QPointer) to nullptr is already
done by the variable's default ctor.
Change-Id: I13f06dc8104ef1c0ac08a25c960641c076f10499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Ensure the test works in a working directory with read-only
permission and that the file names are unique.
The test can then be executed repeatedly by COIN even in case
left-over hanging process helpers still lock the files. Also
disambiguate the "data" files used by various tests.
Task-number: QTBUG-47370
Change-Id: I3b9c7b70828da78f400196fcbba27bc61ea4538f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was used to verify waitForFinished() and printed QProcess::errorString()
on failure, which is misleading, since the process is not
in an error state - it is still running. Example:
QWARN : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() QProcess error: 5: Unknown error
FAIL! : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() 'ret' returned FALSE. ()
Use a plain QVERIFY instead.
Task-number: QTBUG-47370
Change-Id: Iacfa6e1a5ffd2be4e1257a27a400ccc59671e8c8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Silence warning:
Don't know how to handle 'hint', use qRegisterMetaType to register it.
Task-number: QTBUG-49623
Change-Id: Iec0a823c7af87eddd9a3f126a1b970da1ff2f03f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On Windows, the wrong value was used to calculate the
design-to-device scale. The assumption has been that tmHeight
in the TEXTMETRIC is the pixel size of the em square, but
it is not, it's the height of the font (ascent + descent).
The pixel size of the font is defined to be the em square size
in pixels.
On OS X, the kerning data was never actually read from the
font. I've added a lazy initialization for this similar to
the one in the FT engine.
This was discovered when investigating QTBUG-48546, as it turned
out that the kerning information extracted by Qt in this case was
different from the one used by Harfbuzz.
I've changed testfont.ttf to kern "_2" so that the digit is positioned
directly on top of the underscore and constructed a test.
[ChangeLog][QRawFont] Fixed kerning on advances in QRawFont for
OS X and Windows.
Change-Id: Ic9a321ad119ea880cef89b861c75a820ab8d3182
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use a QTemporaryFile in readFromFileAfterJunk() instead writing
to the current directory which might not have write permission.
Enclose each call to QFile::open() in QVERIFY2() with error message.
Change-Id: I3c5da31c6681a2396cee473cafe7d92c5c220de3
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Create a temporary directory instead of writing to the
test data directory or home path (Android).
Change-Id: I6af583e5da91eefb603eaae179e7d789487dc626
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
VS2010 is not supported in Qt5.7+
Task-number: QTBUG-31611
Change-Id: I4b2bd703f6462e6f0a4de9e75bca8316b8707680
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Ubuntu 10.04 is not supported anyways in Qt 5.7+
Task-number: QTBUG-25293
Change-Id: I6420f76b12835aca268455341b46be61e9a2b143
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The EcmaScript format for printing doubles in exponent form differs
from Qt's format only in this aspect. EcmaScript explicitly prohibits
leading zeroes in exponents. It is thus worthwhile to add those flags
in order to be able to generate and parse doubles in compliance with
EcmaScript.
[ChangeLog][QtCore][QLocale] Additional flags in QLocale::NumberOption
allow generating and parsing doubles in EcmaScript compliant format.
Change-Id: Ia7b82c2e67bb8b80bd890014ff5cd4563faf2a03
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Also use this for converting doubles with QVariant. We generally want
exact results there, rather than adding rounding errors whenever we
convert.
[ChangeLog][QtCore][QLocale] Added special value for double conversion
precision to get shortest accurate representation.
Change-Id: I905b8a103f39adf31d24b6ce2c8a283cf271b597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Check that we can use std::forward, and that the compiler
synthesizes move special member functions when it should.
MSVC only supports the latter since the Nov 2013 CTP,
which, for our intents and purposes, means VC2015.
Change-Id: I8d8e4ae064abce90076a05b3b637950ab7d21dac
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QString::asprintf() has the ability to take a ushort* array as
obtained from QString::utf16() and insert that into the output
with an %ls conversion.
But no-one ever used this, because just passing QString::utf16()
to QString::asprintf() creates a warning about wchar_t* expected,
but ushort* provided.
The new qUtf16Printable() macro adds the necessary casts (via void*
to prevent any "type-punned pointer" warnings) to make
passing QString::utf16() to QString::asprintf() work silently.
This should greatly reduce the need to do a round-trip via utf-8
just to print the contents of a QString.
[ChangeLog][QtCore] Added qUtf16Printable().
Change-Id: I7ddd8d2b2a2191c9faa26aca95d49850d94b287c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that it works on C arrays, with auto type deduction
and with types that only provide free begin()/end()
functions that can only be found through ADL.
Change-Id: I760722a0f56c9ebe967070ff68af90b96ed77e66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A loop to skip space and comments was meant to break on anything else
but would have not broken on a division operator (where it should) due
to it getting caught in the check for a comment-start, without falling
back suitably when it didn't complete that check.
Managed to contrive a suitably twisted change to findDeps test to
reveal the bug; broken previously, now fixed. Not ideal, as it relied
on another bug to fail previously - backslash-newline shouldn't end a
preprocessing directive line - but it should still pass once that's
fixed, too. Exercising a bug in qmake usually involves code that
won't compile anyway, making it tricky to write a test that reveals
the bug but that passes once it's fixed.
Change-Id: I08a1d7cc5e3d7fd1ac0a48e5c09dfdfbb7580b11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... at the cost of a bunch of warnings about
ushort*/wchar_t*.
It wasn't checked at all, which isn't really a solution,
either.
Split off the %s checks into a separate function, which
makes obvious the sorry state of sprintf non-%s, non-%d
testing that's left.
Change-Id: I6312f984bacfb568b609e34b5218b3ab9a9765c4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In C++, signed overflow math is Undefined Behavior. However, many CPUs
do implement some way to check for overflow. Some compilers expose
intrinsics to use this functionality. If the no intrinsic is exposed,
overflow checking can be done by widening the result type and "manually"
checking for overflow. Or, for X86, by using inline assembly to use the
CPU features.
Used in QtQml.
Change-Id: I2ef2523ccaa98f6757a45e24862a2fa730a26bb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The ppm decoder used a fixed size buffer to discard comment lines,
which would fail for comments longer than 100 characters.
Task-number: QTBUG-49414
Change-Id: I92e910e025cf7584a6ff1c0e5b0e8a4ab281d479
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Call begin/endResetModel() in QSqlQueryModel and all
derived classes.
Task-number: QTBUG-49404
Change-Id: I11492d6386efb4c945c246a6379aaa6ca4502a25
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
When that happens, we need to detach (in-place conversion won't work),
so we recurse back into the same function, but the template version that
does detaching.
Task-number: QTBUG-49181
Change-Id: Idba8c29717f34c70a58fffff1412fea3acc95f98
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extend the current BLACKLIST to cover all all Windows versions
and add watchFileAndItsDirectory:native backend-testfile.
Task-number: QTBUG-30943
Change-Id: Ic58c090f23d3584843bc1e74eba533d75c530ad3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The file exists and it's listed in json.qrc (for Android) but it isn't
listed in TESTDATA. This is only a problem when the target is a another
system as is the case with Qt for QNX. One of the tests fails because
the file isn't deployed.
Noticed this while testing the changes for custom spacing of JSON
output.
Task-number: QTBUG-47437
Change-Id: I627592a5a225f50fdb8e3cdd6ac72dff43936ae5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apple changed some enums in the 10.11 SDK from being just:
enum { ... }; typedef uint64_t Foo;
to:
typedef CF_ENUM(uint64_t, Foo) { ... };
which in C++11 mode expands to:
typedef enum Foo : uint64_t Foo; enum Foo : uint64_t { ... };
The use of strongly typed enums means we need to explicitly cast from
int in the places where we know what we are doing.
Change-Id: I7c8cfdbc0549471a3292de14d8b766fe17133e25
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This is due to the Gtk style in use. It is already blacklisted for
Ubuntu and in Qt 5.7 we'll use Gtk 3, so there is no reason to invest
into fixing this.
The test used to pass because we would build with -no-gtkstyle.
Change-Id: I1cf26301ba8b19be9a995837b0b5984838ec777a
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
tst_qmenubar::taskQTBUG4965_escapeEaten
tst_qtabbar::sizeHints
These tests will not pass when Gtk style is enabled, similar to the Ubuntu
blacklisting.
Change-Id: I590d84fb7ce0df28d0e8525e0f04b676280a12ff
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
The test is new and something seems to go wrong on the Ubuntu test
machines.
Since it ends up failing a lot, blacklist it for the time being.
Task-number: QTBUG-49388
Change-Id: I06de7ba15aaee68351a747e3a06c0150018b39de
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Test that stepping into the missing hour lands us somewhere sane.
Check that raw instance and product of .toLocalTime() agree.
Task-number: QTBUG-49008
Change-Id: I430382ae223bcb43b151d2d6054ecbdd7edc8a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is follow-up for QTabBar fix ea47d152b3.
In native OS X applications using mouse wheel on combo boxes have absolutely no
effect. We should bring the same behavior to Qt based OS X apps too, as users
are complaining of unexpected behavior, eg. randomly switching Qt Creator
sidebar mode when scrolling file list and moving mouse pointer little bit
above. Moreover inertial mouse behavior on OS X makes combo box usually move
several indexes, rather than single one on slight finger slide.
This also applies to iOS apps so the change affects all Apple platforms.
Task-number: QTBUG-10707
Change-Id: I6582265039198707ad8c2f54de96ee2a0b0e0b47
Reviewed-by: Adam Strzelecki <ono@java.pl>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Otherwise write() for my python (OS X 2.7) wants strings, which is incorrect.
Change-Id: Ibd9d050646d1039ba8370d121dd25756ceffdb7a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
As these are strongly typed, they won't implicitly convert to int, so make sure
to cast explicitly.
Change-Id: Ic8daa31c528bbd8f399ab401d0963e13db191312
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
warning: 'typemsg1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: Ie68d279eccb003a2ca5a0116eea336cbc8776660
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce class ExecCloseHelper which runs a timer
timer checking for the test candidate to become
the active modal window and closing it either
by key event or calling close.
The test then runs in 4s as opposed to 45s before.
Task-number: QTBUG-38890
Change-Id: I610fb09e6b8269d218cddc8d11abae2bd3317f9d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The behavior from before libdouble-conversion is that in case of an
overflow the OK flag is set to false, but the returned number is still
infinity, rather than 0. Also, the number of processed characters is
always set to the number of characters actually processed, unless
garbage is found.
There is an important distinction between an overflow and garbage. The
client code may accept overflows and infinity may be a valid result.
Garbage is most certainly not acceptable. Having an infinity/false result
in addition to 0/false allows the client code to distinguish those.
One application where this is useful is parsing JavaScript.
Change-Id: I4b8581568144b44fca3353c4bd9685c702762af9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A dialog embedded into QGraphicsView has Qt::WA_DontShowOnScreen set
(similar to a native dialog). It must not trigger the modal handling
though as not to lock up.
Task-number: QTBUG-49124
Change-Id: I22ce3f18d01df017b9317666770686bd4491387f
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
When rebuilding the tab bar after hiding several dock widgets,
the index gets offset.
Task-number: QTBUG-49045
Change-Id: I05f6a976ca1d8c6f7cdf6532f1a728483398eabc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On some platforms our 1200 x 1000 bytes seems to be not enough to
fill kernel buffers (socket write). But it's not a reason to fail test,
just skip it.
Task-number:QTBUG-49205
Change-Id: I13ea6f315f9318288ba054cf8bfa6cdd61e489d2
Reviewed-by: Richard J. Moore <rich@kde.org>
This test keeps on failing on Windows 8 with 32 bit.
Let's add the platform despite this one test failing.
Change-Id: Id6a2b3e0b587d3cff29d1f616d5edacfcf68746d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The previous implementations did not check the full mantissa. The result
was that certain NaN values were seen as +/-Infinity.
A nice benefit is that the generated code for this implementation is also
faster.
Task-number: QTBUG-47692
Change-Id: I1507ec579ccd9a2ab97da8cf83dabbc5d6e28597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We want to be sure that the conversions are independent of the current
locale set by setlocale(3) and we want to test both directions of the
conversion.
Change-Id: I01be19e680588478d07fd65a48796e806e681863
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>