Straightforward ports where the container could be made const.
Use C arrays instead of QList if the data is known at compile time.
Drive-by, where appropriate make the for-loop variable a const& (e.g.
QString) instead of copying it for no reason.
Task-number: QTBUG-115839
Change-Id: I273a386e414e5923e750072f0407226efcd4531e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In both cases, the container is a member of the unittest, initialized in
initTestCase(), then not changed after that. So use std::as_const.
Task-number: QTBUG-115839
Change-Id: I3b66127e10ac94137260d99f354de9f66a74bec7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The containers are created locally in the top level test functions, they
can't be made const due to the way they are filled, however the loop
body don't change them; even if the code in a loop would cause
re-entrance du due to signal emittance or events processing, those
containers aren't affected and aren't changed during iteration because
the top-level test functions themselves aren't re-entered, hence
use std::as_const.
Drive-by change: take QHostAddress by const& when it's used as a
for-loop variable (it has a QExplicitlySharedDataPointer d-pointer).
Task-number: QTBUG-115839
Change-Id: I443169e10d973aba2f62854aba200fc2dc2c80aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The loops were iterating over a temporary, so use a local const auto
variable to hold it, and use ranged-for.
Drive-by, make the for-loop variable const& instead of copying it,
for any object that has a d-pointer (QNetworkAddressEntry, QHostAddress,
QNetworkInterface).
Task-number: QTBUG-115839
Change-Id: If96c0b2a6142fe2fa2ed45ed7e2435cc1f80e005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
while touching code, use inline string, since there is only one user
Change-Id: I6e89c24d8a37da090203e6eaf690d9094c5aa76a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The was introduced with the rewrite of QMetaObject::invokeMethod() in
commit 0f76e55bc4, because we have an
optimization for zero timers to avoid creating a temporary
QSingleShotTimer object. The old implementation did attempt to normalize
the target slot name, but did so because it looked metamethods up using
QMetaObject::indexOfMethod:
int idx = meta->indexOfMethod(sig.constData());
if (idx < 0) {
QByteArray norm =
QMetaObject::normalizedSignature(sig.constData());
idx = meta->indexOfMethod(norm.constData());
}
The new implementation does not use this method so it didn't need to
attempt to normalize.
I am fixing this only in QTimer and not in QMetaObject::invokeMethodImpl
(even though it is trivial to do so) because I don't believe spaces in a
pure string to invokeMethod were ever expected to work:
QMetaObject::invokeMethod(obj, "slotName ", Qt::QueuedConnection);
The Q_ARG and Q_RETURN_ARG (for code not recompiled) still does
normalization inside QMetaType::fromName().
Fixes: QTBUG-116060
Pick-to: 6.5 6.6
Change-Id: I964c2b1e6b834feb9710fffd177cac60c83ef413
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If qt is first configured without -developer-build, and then
reconfigured with -developer-build, QT_FEATURE_developer_build will be
ON but QT_FEATURE_private_tests remains OFF, and is not reset to ON.
This causes a link failure in Network, because the source files
defining the QNetworkAccessDebugPipeBackendFactory class are only
added if QT_FEATURE_private_tests is ON, which is not the case above,
but the C++ code checks for the QT_INTERNAL_BUILD define which is
defined when -developer-build is ON.
Align the C++ code to check for the private_tests feature.
Pick-to: 6.5 6.6
Task-number: QTBUG-112957
Change-Id: Ib6ed891a84c6b118836497d6ead48019bb1b9052
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This is to avoid it formatting lambda => as = >
Change-Id: Ie9cb19c8594cab6fe33910f52800fc1b6207a6f6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The recent change in QCocoaScreen (108d2e4486)
fixed the problem with no widget found at 'hot spot' (while we know
it's there, since we create it and wait for it to get expose event).
Pick-to: 6.6 6.5
Fixes: QTBUG-108402
Task-number: QTBUG-115945
Change-Id: Ibbf6867bb3381b8137d64cdbd15cc467d8fcf348
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Unix dispatcher is not used and - as such - redundant on WASM.
Change-Id: Ia8789ef783b06ce9cfba2ce9d67159db2355b594
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Make `mutex` member private and make all former users call
new public member functions that perform locking. Make
old non-locking member functions private.
Change-Id: I29092d1bd785aa6b830183c1c1fe125b16e0d633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QMetaObject::invokeMethod() with a lambda instead of setting
up a permanent signal/slot connections with BlockingQueuedConnection
type. This makes the code flow easier to follow.
Change-Id: I0e77433e3fb96f99ed39f2d14dad737d444d3269
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If OpenSSL version is 3.1.1 or above - this version moved the protocol
under security level 0, but the default one is 1.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-116166
Change-Id: Iaabb2cf33e2a9f280d6167233ee16080dee808b0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Static variables for a message handler were used only in developer
build, while they were declared unconditionally.
That has lead to compiler warnings about unused variables in a
non developer build.
=> declare them only in developer build
=> move assignment and static method in front of the method,
that uses them.
Pick-to: 6.6 6.5
Change-Id: Ie06f91f7857130f08fd484a6e7319ddfd16c546b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The [NSWidow windowNumberAtPoint:belowWindowWithWindowNumber] API has issues
with sometimes being out of sync with the window server, resulting in failing
to hit test windows that we know are there.
This has manifested in flakeyness in our tests, for example in tst_QWindow's
testsInputEvents: http://testresults.qt.io/grafana/goto/YNGj7TgIg
A workaround is to call [NSWindow windowNumbersWithOptions:0] to force a sync,
but we might as well use the more modern block based API to iterate our own
windows in Z-order. This API seems to do the required sync on our behalf,
or at least doesn't operate on stale data.
The logic has been otherwise kept as is, including treating non-top-level
windows as candidates for hit testing, which seems strange for a function
named topLevelAt(). This is to be investigated further.
Task-number: QTBUG-108402
Task-number: QTBUG-115945
Pick-to: 6.6 6.5
Change-Id: I5599881c381a0a673d262e4b9585e2c6798c9810
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Back then elfreader and other unix functionality was added for the
purpose of having one generic deployment tool but it was never used.
Remove the code to be more clear on what to expect.
Pick-to: 6.6
Change-Id: I2b7a759de04afe0c5fb210ad65f1c86e32934f18
Reviewed-by: Timothée Keller <timothee.keller@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As /examples/opengl is already listed in exampledirs, .qdoc source
files under that directory do not need to be listed in sourcedirs.
Doing so will cause the example to be listed twice in lists generated
by the \generatelist and \annotatedlist QDoc commands.
Same applies to imagedirs variable.
Pick-to: 6.6 6.5
Change-Id: I168dbfe111a4cb9615626eb9869f97d3814a14b7
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Safiyyah Moosa <safiyyah.moosa@qt.io>
We updated FreeType to 2.13.1, but forgot the attribution file.
Pick-to: 6.6 6.5 5.15
Task-number: QTBUG-115340
Change-Id: I1e7bc91b9fd4a7674d40d15b3f2759f38831cd8e
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
When using MinGW compiler and Qt is configured with "-static-runtime",
we should pass "-static" to g++ while linking, like Qt 5, instead of
"-Wl,-Bstatic", to get rid of dependencies on libgcc_s_seh-1.dll,
libwinpthread-1.dll and libstdc++-6.dll.
Because syncqt doesn't link to any Qt library,
"target_link_options(${target} INTERFACE -static)" has no effect on it.
So we should use "PRIVATE" instead of "INTERFACE" for executables.
Pick-to: 6.6 6.5
Change-Id: Icf551783f92ef3615b3840c9af16d163eee09fdb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Also while touching code, replace arg usage with QSB to prevent temp allocation
Change-Id: I3573266dbee8a00ae917773c107b5df7774acb79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When appending to an empty string or byte array, we optimize and
copy the internal pointer. But if the other string/byte array was
created with fromRawData this might be temporary data on the stack/heap
and might be de-allocated or overwritten before the string/byte array
is used or is forced to make a deep-copy. This would lead to incorrect
data being used.
This is easy to overlook if you plan to append multiple strings
together, potentially supplied through an argument. Upon appending a
second string it would make a full copy, but there might not be a
guarantee for that. So, it's hard for users to avoid this pitfall!
Fixes: QTBUG-115752
Pick-to: 6.6 6.5 6.2
Change-Id: Ia9aa5f463121c2ce2e0e8eee8a6c8612b7297f2b
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IndexedDB version of QSettings will now use solely the sync versions
of data access functions. Those will suspend with JSPI.
This makes IDB settings conform to the QSettings contract - and also
allows us to enable tests in tst_qsettings for the IDB version of
QSettings.
Also, do not treat the IndexedDB format as one defining read/write
functions in QSettings - those are the same as for ini format, as
IndexedDB settings backend uses a backing ini file.
Change-Id: Iee3471cc79c0cea87378923cf9baac58e56d1272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Starting from OpenSSL v 3.1.1 DTLS 1.0 is only available, if the
security level is 0, which is not the case most of the time. So
we consider this version number to be a 'threshold' after which
we don't test v 1.0 anymore.
Pick-to: 6.5 6.6 6.2 5.15
Task-number: QTBUG-116166
Change-Id: I9763703f36ae742e1d3c7cb17872cf8d0d82ab85
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Observers should only be registered when _reading_ the property.
Otherwise we get binding loops.
Pick-to: 6.6 6.5
Change-Id: I974f6ea444fa7a5d333ed79eea6f34e3d757d169
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Use QMetaObject::invokeMethod() with a lambda instead of setting
up a permanent signal/slot connections with BlockingQueuedConnection
type. This makes the code flow easier to follow.
Change-Id: Ib6566e7a4694ecbd69900b645d020b3331fb3462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Split the source code into a separate file for easier code
navigation and to better match the rest of Qt.
Update the link to the blog post explaining the
preventDllUnload() function, mention the blog post title
to make it easier to find it again when the link breaks.
Change-Id: I061d72bc795110f03352abf10fc639ddd6243527
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only create a qtrepo_src_for_examples target that examples, built as
external projects, can depend on.
Change-Id: I334bc67b9b78f49d5c345cb256132f42dc2c5f5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Create the global static free timer ID list in the constructor
so that it is destroyed after any global static QDaemonThread instance
that may be using it.
Fixes: QTBUG-58732
Pick-to: 6.6
Change-Id: Ic2d33ac3aa2ec3ca0261be9996920aae260e16fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
During refactoring of the vista style in
46f98147f4 a regression slipped into
subControlRect()'s default branch which lead to a double call of
visualRect(). This breaks nearly all subControlRect() calculations in
rtl mode.
Fixes: QTBUG-116224
Pick-to: 6.6 6.5
Change-Id: Ida722e1b6c6a311b27a9b48d1fe1378b47c21cf4
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
The loop was iterating over a temporary, so it couldn't have changed it.
Store the container in a local const variable and port to ranged-for.
Drive-by change: don't call ps->availablePrintDeviceIds() multiple
times.
Task-number: QTBUG-115839
Change-Id: If2cabec68040dc7096acf0b7ddeff72d7c8c7750
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
resolution(): a local const container, Q_FOREACH wasn't needed here to
begin with, port to ranged-for
The rest, the loops were iterating over temporaries, so just put them in
local const auto variables and use ranged-for.
Task-number: QTBUG-115839
Change-Id: Iebe6d164661d74df9fefb764c370cdc9a8e817ff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
msgMimeTypeForFileNameFailed(): the method takes the container by const&
and I've made the container const at the call site, so now it's
iterating over a const container.
allMimeTypes(): iterating over a const container.
checkHasMimeType(): was iterating over a temporary, store it in a const
auto variable.
Task-number: QTBUG-115839
Change-Id: If10eb425d55484bc1857dfdeafa9d65b2beb765f
Reviewed-by: David Faure <david.faure@kdab.com>
proEval(), proParser(): the loop was iterating over a temporary so it
couldn't have changed it. Hold the container in a const auto variable
and use ranged-for.
formatValue(): iterating over a const QList& parameter, and the container
isn't changed at the call sites during iterating, so Q_FOREACH wasn't
needed to beging with. Use ranged-for instead.
Task-number: QTBUG-115839
Change-Id: Idabe0bbd84b5bcc86cef275f80497651353a4d9e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
systemEnvironment(): the loop was iterating over a temporary; hold the
temporary in a local const auto variable and use ranged-for.
runCommand(): the container is a const&, the loop doesn't change the
container and the containers the method is called on aren't changed
during iteration.
Task-number: QTBUG-115839
Change-Id: I6687e5ff64ff8c2fa26e34abf4044b98718e65d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
specifyMetaTagsFromCmdline(): the loop was iterating over a temporary so
it couldn't have modified it; hold it with a const auto variable and use
ranged-for.
relatedMetaObjectsNameConflict_data(): make the container const and port
to ranged-for.
Task-number: QTBUG-115839
Change-Id: I6a5afdf0e5a3dd47818da0025fbbeacd05335b39
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The loop was iterating over a temporary container, so it couldn't have
changed it. Use a const auto variable to hold the container and port to
ranged-for
Task-number: QTBUG-115839
Change-Id: I66e7cbdb811666ca352cdf064b1228caa346d876
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
badString(): const'ify the static QList, this is both faster as the
compiler doesn't need to check if it has been already initialized, and
it means we can use it directly in ranged-for as the method returns
const QList&.
Drive-by change: don't go the long way around to get a const char*:
qPrintable(QString("fail %1").arg(ba))
instead use:
QTest::addRow("fail %s", ba.constData())
(thanks to dfaure for pointing it out in review).
Task-number: QTBUG-115839
Change-Id: I6e8efa6df47ee94f1d71a63e22ab121647e6bf20
Reviewed-by: David Faure <david.faure@kdab.com>
The container is local to the function, but can't be made const due to
the way it's filled. The loop clearly doesn't modify the container so
use std::as_const and ranged-for.
Task-number: QTBUG-115839
Change-Id: Ia9f01dfaccfca3225fe0487aafd0a386605cf466
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These are member containers of nested (in the test function) structs.
It's clear the container isn't modified in the loop body, so use
ranged-for and std::as_const.
Remove "#undef QT_NO_FOREACH".
Task-number: QTBUG-115839
Change-Id: I0588bf4b6520b42d6d8678d702192fb894956b05
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is a local container that isn't modified in the loop, so use a
ranged-for loop with std::as_const.
Task-number: QTBUG-115839
Change-Id: Ie9129e065f8ae9bd8c93cf95093a77529aef0803
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
