This is useful when writing a generic preview-icon-generator which
should work with different type of views, itemviews and QML views.
A way to be notified of a change of icon size was missing on the itemview side.
[ChangeLog][QtWidgets][QAbstractItemView] Added iconSizeChanged signal.
Change-Id: I19b3049961002ca27d71aefbb6980d1e6f225c79
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Avoids allocating a QString for every char being written out.
The benchmark went from 5.5 ms per iteration to 0.8 ms,
and from 40 million instructions to 6 million.
Found using Milian Wolff's heaptrack tool.
Change-Id: I1784c47b944454bc947a607a22c39d249372ed55
Reviewed-by: Adam Majer <adamm@zombino.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QIODevice makes readData() call only when its read buffer is empty.
Also data argument points to the user or reserved read buffer area.
So, no need in data transfer from read buffer at this point at all.
Change-Id: Ieb4afdf7eec37fdf288073e4a060e64424f22b9c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you configure QOpenGLWidget to use sampling, the 'resolvedFbo' isn't
updated during resizing. This leads to garbled views.
Change-Id: I9f9265520134bcf12436778773507df936c5fbb6
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
According to the XDND standard (http://www.newplanetsoftware.com/xdnd/)
if the proxy window exists then it should be checked for the XdndAware
property rather than the target window directly.
c3f9de6296 introduced the mistake.
In the old code the proxy window was used.
Change-Id: I83b66d4b1f08a1f44d5c1451d0f1735c084bcf09
Spotted-by: Alexander Smirnov
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In both cases theme.rect calculated right after the
"sub & SC_ScrollBarSlider" test.
Change-Id: I9fa0c4e1327e68b4184674a13e7a4bf362f8deff
Reviewed-by: Adam Majer <adamm@zombino.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If defined, the value of this variable is prepended to the built shared
library's SONAME identifier.
For more information, see: qmake/doc/src/qmake-manual.qdoc#qmake-soname-prefix
Task-number: QTBUG-31814
Change-Id: I4bceaf0c93162e4fad6bb424af1b82e74d38acdc
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
QOpenGLWindow already has some notes regarding this. It must be
mentioned in QOpenGLWidget too.
Change-Id: I0af90c9410a1c44cb9dd9ce58aa0371a58c57f65
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Make it clear that the class is usable regardless of the OpenGL version
the app is targeting. It may just do nothing.
Change-Id: I50e68a46e36ef1f4694016311af93c6f8719ce4f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
To convert coordinates to a parent's coordinate system one should
translate them by an offset of a child widget relative to it's
parent widget. QRect::moveCenter() doesn't translate, it sets
the coordinates of the touch point's center to this offset.
Change-Id: I9d823784803bd1448c0d665944090674d3ff518b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Otherwise the protos are not pulled in so the ANGLE-only build cannot
suceed (unless the flag is defined from somewhere else).
Task-number: QTBUG-41164
Change-Id: I959d154da88f7ccc8159ec7e810ffdba0e7f50ea
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
While GCC 4.4 has the required header, it is missing important
typedefs requiring use of pointers instead. This is acceptable if only
used in one or two places, but a quick search through the source code
lists quite a few usages of const_iterator typedef.
$ git grep -c initializer_list\<.\*\>::const_iterator
src/corelib/global/qflags.h:2
src/corelib/json/qjsonarray.h:1
src/corelib/json/qjsonobject.h:1
src/corelib/tools/qhash.h:2
src/corelib/tools/qmap.h:2
src/corelib/tools/qset.h:1
The lesser-evil is to bump Q_COMPILER_INITIALIZER_LISTS to version
GCC 4.5 and retain usage of required (by standard) initializer_list
typedefs.
Change-Id: I38d6fa0ef3dc7d958587b406d33e3e3a7378c026
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have no business defining types which come from another library.
These originally stem from the S60 port without further explanation
and Qt and its examples today compile without them, so remove them.
Change-Id: I683ea897c00ab3a1f7c809c45352fe590ae9a41f
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Use the new dedicated field instead of just assuming that the evaluation
timespan is buildtime + 30 days.
Change-Id: Ibf4078f030ea609d823fe01889a106a5da345817
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
It was decided not to port the handling of the saved
screen size to Qt 4.8, so, bump the major version to
ensure Qt 4.8 bails out.
Task-number: QTBUG-38858
Change-Id: Ia870519553172cd383830d9a722b0fada180ee1b
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
Windows does not automatically move WS_EX_TOOLWINDOW type windows.
Task-number: QTBUG-39320
Change-Id: If9804f32beb534a27ba649abf5eaceb686af8f50
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit adds id tags with the anchor reference as the value
to html entities for documentation section titles and function
signatures, properties etc. for both C++ and QML documentation
pages.
Together with new CSS rules, we can dynamically highlight the
title that the user clicked on. This helps to locate the item
of interest on a crowded page or when the page cannot be
scrolled down enough to place the selected item on top.
Change-Id: I7d1db2ed4e12779e1a9e571996ee65c3befa4e7a
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Don't wait for the GUI thread when it's already waiting for us.
An application that uses the virtual keyboard may get an inputmethod
query just when it is being suspended. If the GUI thread is already
blocking on a semaphore at that point, waiting for the android thread,
we really do not want to wait for the GUI thread...
Task-number: QTBUG-40955
Change-Id: Iea2cf0dd058a41a897d596c4bcf16f0508adb20b
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
When we suspend the app, we destroy the surface to save resources.
We don't want to create it again just as we are shutting down.
Task-number: QTBUG-41072
Change-Id: I7a616249bee869b92716d0911201a80d73c2f8da
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Currently the peerVerifyError test for QSslSocket makes an assumption
about the order in which SSL errors are emitted by peerVerifyError. This
assumption does not necessarily hold for non-OpenSSL backends.
This change fixes this assumption, and also checks that HostNameMismatch
was found both in the errors emitted by peerVerifyError and by sslErrors.
Change-Id: I856d1ea43b36332db0f178d35fc14a4bb18ad673
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the QSslSocket tests use OpenSSL-specific symbols. This
change fixes this issue.
Change-Id: Ib67efa42a15facaf0ad34fc0466341a37d945d1e
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Metrics obtained from the system must be scaled down
when device pixel ration scaling is in effect. Factor out
functions to return the device pixel values which might still
be used for drawing.
Task-number: QTBUG-38993
Task-number: QTBUG-38858
Change-Id: I6b90629e4979436bbb46f8c1fa1ee2253ada7ece
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
Also, remove the -angle-d3d11 configure option, as it no longer is
necessary to select the renderer at build time.
The D3D11 renderer is the default renderer in upstream ANGLE, and has
been shown to be a more reliable solution for developers running over
remote desktop and inside virtual machines. It also provides more features
to the OpenGL ES implementation.
This configuration switch does not disable the D3D9 render; if the GPU
does not support D3D11, D3D9 is used instead.
[ChangeLog][QtGui][Windows] The ANGLE D3D11 renderer was enabled by
default. Systems which cannot use the new renderer will automatically fall
back to the D3D9 renderer at runtime.
Task-number: QTBUG-41031
Change-Id: If894309c07d9309c236b63c36f37679f74375133
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
The code says
bool QRect::isValid() const { return x1 <= x2 && y1 <= y2; }
so the documentation should say <= as well, rather than <.
Change-Id: If52005879d2a758b5d1d64b552e6cd96341fae76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
This one is a bit more complicated, as the QPolygon was returned
from a helper function, so I wrapped the array in a minimal
std::array-like StaticPolygonF.
Together, these four QPolygon -> QPoint[] changes result in
ca. 4.5K text size reduction for libQtWidgets.
Change-Id: I082f199d5edb7a7782173fe3748220f373edac8a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
Change-Id: Ie1eecd376a52b73572998ba253a032deaa0daaf9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
Change-Id: Ifdf8224ddffe06ef7848562023e372e2c32b9ad6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
Change-Id: I50c69103bba47e9f6de4f5616e8f40fee522ddc2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Both Q_LITTLE_ENDIAN and Q_BIG_ENDIAN macros are always defined
on all architectures. So, byte order detection results in
"little_endian" value for big endian systems. Test the system
endianness in a right way, according to Q_BYTE_ORDER macro
documentation.
Change-Id: I5523f90567e78d679a3ff2902a8f5377ed39ceb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For iOS8 and up [UIScreen bounds] changes based on the interface orientation,
so we need to use [UIScreen nativeBounds] instead.
Change-Id: I3fc12cfa417df26ca94c803e970bc2dc18a94378
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Provide workarounds for things GCC doesn't like, and define a number
of macros not found in the MinGW headers.
Change-Id: I254c208209c0071fae5efb6727f2b3cfd5542da6
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
When we strip the & we should also report the hotkey.
In addition only strip labels when they are buddys and try not to remove
ampersands from all kinds of random text.
This fixes https://bugs.kde.org/show_bug.cgi?id=338282
Change-Id: I401281cd9ff43b23a3923ad9909ca9c469b59506
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
These functions are supposed to make it easy for third parties (and
QLineEdit) to implement the textAt/Before/AfterOffset functions.
Before the functions were ignoring newlines completely and thus only somewhat
useful.
Change-Id: I7136b9502a7fa6f8ad9ad7236761a34c1a7fd4da
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
I was actually wondering if the test always succeeds (i.e. should
be turned into a Q_ASSERT), but I don't know the codebase enough to
justify such a change.
Change-Id: Id01b8de7244428e9b1c240dc365c66eeef0d6111
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Trying to be smart and minimizing the amount of GL calls per frame
to provide a good example was a mistake (in a way): There are
components, like the eglfs mouse cursor, that change the context state.
To make sure the example work in these cases, set the state upon
each frame.
Change-Id: Ief1fd7bbb0fb1955a64dac97a071b7a3d9d506d4
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Read and store softInputMode set at AndroidManifest.xml on QtActivityDelegate.
When showSoftwareKeyboard is requested setSoftInputMode for main window if
softInputMode is not defined fall back to old behavior.
Change-Id: I71cb27d4bdb4ae4e3c2a0706560173703a2f5a50
Task-number: QTBUG-34401
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
