Replace the identity check with a check for the underlying QHash
objects being shared and replace backwards iteration, which is really
forwards iteration with wrapping at bucket boundaries, with forward
iteration. QSet cannot contain duplicates, so the order in which the
RHS elements are presented to the algorithms does not matter.
Change-Id: Iad8528e3a9501b14cb85601b221a848aad91480c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QWidgetPrivate::windowHandle() should not return nullptr from the
WindowHandleMode::Direct branch in case WindowHandleMode::Closest was
passed.
Ameds eed9a8fbd3.
Task-number: QTBUG-62094
Task-number: QTBUG-73231
Change-Id: Ia55fff15f0a499cef9525e53111ddd55b2e012d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
g_options.buildPath did not have native separators. This caused
INSTALL_ROOT to not have native path separators, which again made
'mingw32-make check' fail to deploy the .apk. (The actual failure was that
mkdir failed because it did not accept paths with forward-slashes, so the
install_target rule failed. For the record, the command of that rule had
the following call to mkdir:
mkdir $(INSTALL_ROOT:@msyshack@%=%)\libs\x86
Change-Id: Id792c36986b52a527546d48aa9f7d9587e7a18d9
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
RenderHint::HighQualityAntialiasing and NonCosmeticDefaultPen are
obsolete since Qt5 but not marked as such. Therefore add
Q_DECL_ENUMERATOR_DEPRECATED_X now so those two enumerations can be
removed with Qt6.
[ChangeLog][QtGui][QPainter] HighQualityAntialiasing and
NonCosmeticDefaultPen are marked as deprecated and don't have an effect
anymore
Change-Id: Ib0c966a078a1d23d492d0255288e2066c50e87b6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Remove the mainW, edit widget member variables from the test and use
widgets instantiated on the stack in the tests.
For the data-driven tests, use a static QScopedPointer, which is
reset by a newly introduced TestEnd action.
The book-keeping logic maintaining a list of shortcuts can then be
removed.
The setupShortcut() helpers are simplified and the special case
TestWidget::SendKeyEvent is replaced by a lambda in
keypressConsumption().
Task-number: QTBUG-76493
Change-Id: I15dfa86dfa0666ed8288b7190e37cdb862c261c8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Use member initialization
- Introduce nullptr
- Use auto where applicable
- Use range-based for
Task-number: QTBUG-76493
Change-Id: Ic4dbee2d76a65be1f8a4c25f4ca7e4f032443579
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Varying versions of the library may be available depending on build tool
chain or Windows version. Try to dynamically resolve the D3DCompile
function.
Fixes: QTBUG-76845
Change-Id: Ib7eb3b8c454e9c25731eb2ba9ba45e54fe3f1283
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This is in preparation of deprecating QLinkedList.
Most is straight-forward, except where operator+ was used on linked-list
iterators. In one case, replaced this with std::next, in the other, with
prefix increments, since the advancement was always equal to the loop
control variable. Since advancing a linked-list iterator is a linear
operation, this removes a source of quadratic complexity.
Another obstacle was the overloaded op< set, which was in the Qt namespace
while the iterator is from std and the payload, as before, was global.
This breaks ADL, so move these operators to namespace std. This violates
the standard, but the functions are tagged with our distinct types, so it
shouldn't cause any trouble.
Change-Id: Ifec0a927bfdabb002838cdf86fb8d23b32a38ff7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This class was introduced to modify the hook handling of
QWindowsGuiEventDispatcher. As the hook handling code is removed now, we
can remove QWindowsDirect2DEventDispatcher entirely.
Change-Id: I56491a67f163784f43b1025225e536d386cead1d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The main goal of this patch was to port away from Java-style
iterators, to make QtBase QT_NO_JAVA_STYLE_ITERATORS-clean. And this
the patch achieves.
But I couldn't resist a few drive-by fixes, too, to wit:
- Use qDeleteAll() instead of while(!isEmpty()) delete takeFirst()
- Use QMap::last() instead of iterating to the end, remembering the
last-seen value
- Use QMap::contains() instead of QMap::keys().contains()
- Use qExchange() instead of copy+clear
- Make some functions const (requires the mutex member to be marked as
mutable, which is common for mutex members)
I am almost certain that getSsidFromNetworkName() cannot work correctly.
But this patch does not attempt to change the algorithm.
Change-Id: Ifa04d7837bdc0837036c3a7a73f8c51f4e681f42
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since commit 6a7cea64 qt_GetMessageHook is effectively a no-op, and
we can remove the complete hook handling code.
Change-Id: I90383c0c09c2b0f1d715872de5f9519a879d9bae
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Use nullptr
- Fix static method invocations
- Use QString() instead of QString("")
- Use override
- Use member initialization
- Remove unimplemented code related to status bars
- Use Qt 5 connection syntax
- Fix apparent oversights in ambiguousItems() and
unicodeCompare(),where the 2nd shortcut was assigned to the wrong button
- Use Q_ENUM for the enumerations which will output the value in
QCOMPARE and automatically declare them to be a metatype
- Use enums in helper function signature for clarity
Task-number: QTBUG-76493
Change-Id: I0ed6ee7ee8dc2dbb48160a8383e6ed29164c3449
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise "QVarLengthArray<Foo> x = {};" gives a warning. Also, some
compilers get confused about "QVarLengthArray()" this way.
Task-number: QTBUG-76199
Change-Id: I4296586c0181d3e6e82ca8b7b79aeb9a21645d1f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This opportunity was missed when adding the QStringView overload of
QStringList::filter() in 2a99f60cfb.
Change-Id: I8d679b92de6cc76c4d59fd54f01a25579ab3488f
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As planned when adding YearRange: now that it's merged up to dev, move
it to QDateTime, since we can add to the API at 5.14.0.
This follows up on commit 82ad4be4a2.
Change-Id: I81b6c2331121a71e2592514781c02c5756e70c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We've not run util/locale_database/cldr2qtimezone.py for a while, so
CLDR has had time to add several more zones. Catch up, inserting the
new entries in order.
Change-Id: I8625548b0f7775958230eccbd89b897d7afed9e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It wasn't mentioned in cldr2qlocalexml.py's instructions, so I didn't
know to run it. The data it used in an illustration was out of date.
Two tests could be combined with no loss.
Change-Id: I26e619e6210ea5b1258326fc4bc2b6aee9d6a999
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When scanning the CLDR data, the script raised an exception if it
didn't recognize a zone ID. Instead, collect up such unrecognized IDs
in a list and report them all at the end, so that whoever runs this
can do them all in one go, rather than doing one, running the script,
doing the next, running the script, ad nauseam.
Change-Id: Ia659f1d1c7e1c1b4ccb87cc23828a0588a5bf958
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use tuples for the fixed data. The numbering of rows in the data
tables isn't part of any public API, so we can change it freely; it is
thus unnecessary, as we can just enumerate a tuple of the data values
to generate sequential indices on the fly. (Updates to the data shall
no longer need to renumber in order to insert entries.)
Restore ordering of the data tables, and remove wanton spacing from
inside parens, in the process.
Change-Id: I59956cfb6191fe729300b57070671b7e66bd0379
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Casting an object to a subclass that is not the dynamic type of the
object constitutes undefined behavior.
Fix by befriending QObject.
Change-Id: Ib70dbef9095df31a6d89449d82a02cef9fccd348
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Since commit 20e9422e we don't ignore exit codes when installing files
anymore. This patch does the same for meta file installation. We
really should be notified properly if something goes wrong here.
Task-number: QTBUG-18870
Change-Id: Ib6a20293380f400379b10ec767bf38dc74d5beeb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
With all of their special behavior deprecated, QCharRef and QByteRef
can simply be removed. Add a comment.
Change-Id: I8bad95424207ae281b5edf348b9ad81c6807dc12
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The resetShaderResources() done when starting a render or compute pass
purges all vertex, index, SRV, and UAV bindings. This will be optimized
at a later point, but until then the command buffer's state should be
updated accordingly, otherwise certain use cases end up with incorrect
rendering results due to not binding vertex/index/shader resources
as appropriate.
This fixes the shadowmap example on d3d.
Change-Id: I4d07929b8664b64bc608c6c8df474b0ee7c2ddbb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Have feature flags as appropriate. OpenGL is causing a mess here
but let's support what we can since some of this will become relevant
in more sophisticated mesh drawing cases with 3D in particular.
Change-Id: Idfa7b4642ec87147978e03d78d6233efbd151491
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Draws 1024 cubes at random x,y positions with varying color with
a single instanced draw call.
Change-Id: I8737503acf23866ad4734b1d88753415a3b93445
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Enforce the maximum texture size limit both for textures and renderbuffers,
showing warnings and adjusting the size automatically.
On the low end ES 2.0 devices we can easily hit a maximum size of 2048x2048.
For example a Raspberry Pi running in full HD with the Controls 2 Material
style breaks right away as it tries to create slightly wider than 2048 texture
for its ShaderEffect.
Instead of breaking with an obscure framebuffer incomplete warning at best,
show something more informative and adjust the sizes so that something shows
up on the screen still.
(naturally applications not taking the maximum sizes returned from QRhi
into account are technically incorrect and may well end up with incorrect
rendering, but we should still try handling this as gracefully as possible)
Change-Id: Ib75eb893ab4774e1a3c49ed2d14c6bf9be8c807a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So that we can now operate on plain ES 2.0 implementations like the
Broadcom stack on the Raspberry Pi (which does not even have packed
depth stencil).
Also add the WebGL-specific combined attach logic to enable WebAssembly.
This has not been tested in practice.
Change-Id: I21219319062f295c1e88e3057c0c2ede724ac664
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...but this will vary between backends, or in some cases
even between implementations of the same API.
Point size is settable only via the vertex shader (gl_PointSize).
It is silently ignored with D3D and HLSL.
Line widths other than 1 are supported only on OpenGL and Vulkan.
(but this is in fact deprecated with GL and optional with Vulkan)
Add QRhi::Feature values for both.
The line width is now settable on QRhiGraphicsPipeline. It is not a
dynamic state since the static, per-pipeline width is good enough for
most cases. (and the feature is not supported on half of the backends
anyways so it will get limited use in practice).
Change-Id: I6d3a32269527c452b794b2cb8b0f03101eab40b2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
By default RTEMS does not support linux extensions for errno.
Enable it for build.
Change-Id: I43b346794b99ac0ed339bfbe6e39684071615503
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
The default stack size is too small on RTEMS.
Qt uses threads internally and there is no way to change their stack
size.
Change-Id: I94a42c7a70c745f0b50d7051d9320edfabd1e09e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtCore][QStringList] Added QStringView overloads of join(),
filter(), and replaceInStrings().
Change-Id: I9636e21e2e43ed46cce0aa7fa23ab0710aa641ba
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This change is used to generalize a template docker-compose file for all
modules. Ideally, the leaf module only need to keep a docker compose
file for all platforms (docker-compose.yml).
NOTE:
The version of docker-compose file downgrades from 3.4 to 2.1 because
the 'extends' keyword is not supported in Compose version 3.x.
Change-Id: I2e36fd9236eda86cb5fcf940d787ccefe9200696
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
RTEMS does not have "timezone" global variable.
Change-Id: Ifa4c6f8939270a83fb7b5ba623daafa1e9f81003
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I366cca6e5755719e8241e76774af6be2b5312627
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because it is.
Change-Id: I8d5204c30884b2c8656615a7d82428c539672d28
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The array of QAtomicPointer<QMutex> can be initialized using relaxed
stores of nullptr, since nullptr is the whole data. But once we store
an actual QMutex pointer in the array, we need to publish the indirect
data thus created. We did this, with testAndSetRelease(); what was
missing was a corresponding acquire fence on load, without which there
is no happens-before relationship between the writes performed by the
QMutex ctor and the reads performed by a subsequent mutex.lock(), say,
on the same data.
Fix by adding acquire fences to all loads. That includes the dtor,
since mutexes may have been created in different threads, and never
been imported into this_thread before the dtor is running.
As a drive-by, return a new'ed QMutex that was successfully installed
directly to the caller, without again going through a load-acquire.
Change-Id: Ia25d205b1127c8c4de0979cef997d1a88123c5c3
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and schedule it for removal in Qt 6.
This appears to have come to some fame on the internet, so better add
a deprecation warning before we remove it in Qt 6.
Change-Id: I42d91d933f47dfd2d8d54c92358e9e46ced6bf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This appears to have come to some fame on the internet, so better fix
the implementation before we remove it in Qt 6.
Change-Id: Ia37ca89105b13bea1ffcdce8b2e8cd957b7bd108
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
