This simplifies the code a little by having a single code path. More
importantly, we no longer need to call the evil function
dbus_connection_send_with_reply_and_block. That function acquires a lock
on the socket transport inside libdbus-1, which means all threads need
to wait until the one call gets unblocked before they can continue.
To do that, this commit reimplements the QDBus::Block part of
QDBusConnectionPrivate::sendWithReply by reusing the existing call to
sendWithReplyAsync() and then doing a blocking-wait with
QDBusPendingCallPrivate::waitForFinished().
By using (Q)DBusPendingCall and the threaded connection approach (next
commit), now we never block on the socket. That also means the code to
call dbus_pending_call_block() is no longer necessary and the
waitForFinished() function itself can be considerably simplified.
As a side-effect of no longer blocking, a number of pre-existing race
conditions that used to be hidden showed up.
Note: this commit deadlocks without the threading (next commits).
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b73754954a3f7d
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I363776ef664c97bca0071d57cf78a8fe935bce8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, if I open tests/auto/dbus/dbus.pro in Qt Creator, it shows me
"test", "test2", "test3", "test4" and it's very hard to know which test
is which.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0654696c025b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This isn't specific to an Ubuntu version, unfortunately. It also fails
on OpenSuSE occasionally and other Ubuntu versions.
Change-Id: I6a1ca55a198270f1a1e8a9916e9f768762211550
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This function was introduced alongside the support for Unix file
descriptors, so it's a good indicator of whether Unix FDs are
supported. Ever since dbus_minimal_p.h, however, DBUS_TYPE_UNIX_FD may
be defined even if the system libs don't support it.
In order to fix this issue, I had to fix what was apparently a merge
conflict resolution mistake and remove the #ifdef around the test. Doing
the latter is a good idea due to moc being unable to find <dbus/dbus.h>.
This was tested with both linked and dynamically-loaded libdbus-1.
Task-number: QTBUG-46199
Change-Id: I66a35ce5f88941f29aa6ffff13dfb4b5438613a3
Reviewed-by: Jani Vähäkangas <jani.vahakangas@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Because if it doesn't, then calling dbus_type_is_fixed or is_basic may
result in a failed assertion.
process 16304: arguments to dbus_type_is_fixed() were incorrect,
assertion "_dbus_type_is_valid (typecode) || typecode ==
DBUS_TYPE_INVALID" failed in file dbus-signature.c line 345.
Change-Id: Idf715b895bac4d56b4afffff13db2ed71b1516a5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Commit 748abf9347 changed the message, but
the CI either did not run the QtDBus tests when integrating or it
ignored the results.
Task-number: QTBUG-45317
Change-Id: Iee8cbc07c4434ce9b560ffff13d058f21b73ac05
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Tests are now passing in CI.
Change-Id: I0051fb7070c1c1027c557eba9dde6367ad59ac7a
Task-number: QTQAINFRA-837
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QDBusMessage::createSignal() static method doesn't take a parameter
for specifying the destination service of the signal. While this is not
a widely used feature, it can be useful to avoid waking up all connected
clients when the service knows what are the clients which are interested
in the signal.
This commit adds a QDBusMessage::createTargetedSignal() method which
also takes the destination service as its first parameter.
Change-Id: I9fdca53673a6944c39c93c1efd69a9d02859684e
Task-number: QTBUG-44704
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QDBus relies on a key in QMetaClassInfo to understand the DBus interface name.
This patch allows QDBus to also use a specified interface name in the registerObject call
instead of relying on QMetaClassInfo that might not be there (if the QObject was created
in QML or Javascript for example).
Change-Id: Ie02b2c67e7deb07f43e35eb166c11833fcbf38f3
Task-number: QTBUG-44074
Reviewed-by: Kevron Rees <kevron.m.rees@intel.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
isnan is C99 and POSIX.1, which the older MSVC do not support. Use the
Qt equivalent.
Change-Id: Ic5d393bfd36e48a193fcffff13b8679cb83d12db
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Two serious mistakes:
- we need to call dbus_server_free_data_slot as many times as we call
dbus_server_allocate_data_slot
- we need to delete the d pointer...
The changes to the unit tests are simply to cause the used peer
connections to be removed so they don't show up in valgrind.
Change-Id: I9fd1ada5503db9ba481806c09116874ee81f450d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This has been deprecated since QDBusContext was introduced (Qt 4.3). So
it's time to remove the functionality.
[ChangeLog][Important Behavior Change] QDBusConnection::sender()
(deprecated since Qt 4.3) has changed to always return an invalid
QDBusConnection. To know what connection the incoming call was received
from, use QDBusContext.
Change-Id: I355efb82c14e54ed718c8f892d8267e727b19118
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
There's a change in Qt 5.4.0 that makes Qt compile with its own set of
D-Bus headers, which means QT_CFLAGS_DBUS may be empty. Thus, we can't
compile or link if we're using the actual libdbus-1 API to build the
test.
This commit makes these unit tests use the same dynamic loading
mechanism.
Change-Id: I56b2a7320086ef88793f6552cb54ca6224010451
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The error of "Not connected".
This incidentally solves a crash when QDBusServer().lastError() is
called but libdbus-1 couldn't be found.
Change-Id: Id93f447d00c0aa6660d4528c4bbce5998d9186a8
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
On the unit test side, everything is sequential: we first ask for the
connection, verify that it is connected, then ask the remote side via
the session bus if it is connected. Unfortunately, the remote site may
handle things in a different order: it may handle the incoming function
call to "isConnected" before doing accept(2) on the listening socket.
So, instead, make the local side block until the connection is received
on the other side. On the remote, we don't block, instead we use the
feature of delayed replies.
Change-Id: Ie386938b8b39dd94a9d7e5913668125fb4a3c7da
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
So we can get the output when running with QDBUS_DEBUG=1.
Change-Id: I6a6b8e0d82727c522914fb90a7ce594c86307d8f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Instead of killing them outright (and note that terminate() doesn't work
on Windows), ask them nicely to exit on their own. This way, if we run
them in valgrind, valgrind gets a chance to print the leak check output
and summary.
Change-Id: Ib6cc8d4560ff0bf255f94980eb220e97592c00f0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Wait for the subprocess to print "ready" before assuming that it is
ready to receive calls. waitForStarted() will return as soon as the
child is running, but it may not have registered on D-Bus yet.
This also solves the synchronization problem more elegantly than how
tst_qdbusmarshall.cpp was trying to do it.
Change-Id: I548dfba2677cc5a34ba50f4310c4d5baa98093b2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The executables are not in the same dir as on Unix, so we need to use
QFINDTESTDATA to find them. The DESTDIR setting prevents qmake from
placing the executables in a "debug/" subdir.
Change-Id: I1d6d10e6f6f109f55fd9809dcf83da0386f38772
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Rohan was right in e88f9a92b7 to stabilize
the test and reset the state, but killing the subprocess is overkill.
All we need is to reset the state in both applications, which includes
disconnecting and reconnecting to the peer, to discard any sent but not
yet received messages.
Change-Id: Ie01392e6e63bd70ef8345217d3fc641ed63c7aba
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QDBusServer::address() will return an empty QString, which caused the
tests to fail later with no apparent reason.
Change-Id: I86f448dfc67a6cdb27ecda2d490f335766cfaf4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows the tests to be run on Windows too by using TCP socket
connections instead of requiring Unix sockets. The tests shouldn't have
hardcoded the path, which came from QDBusServer anyway. Now the tests
simply defer to QDBusServer.
This is a slight behavior change for Windows, but not one that should
matter since anyone who was using the default constructor resulted in a
QDBusServer that failed to listen.
[ChangeLog][QtDBus][QDBusServer] Fixed a bug that made QDBusServer's
default constructor try to bind to a Unix socket on non-Unix systems.
Now QDBusServer will attempt to bind to a TCP socket instead.
Change-Id: I2a126019671c2d90257e739ed3aff7938d1fe946
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When generating the DBus signature of a registered custom type the
marshaller appends the signatures of the map entries and array items
after the map/array causing an invalid DBus signature to be generated.
This happens because beginArray() and beginMap() output the full
signature of the data.
Fixed by suppressing changes to the signature within
beginArray()/endArray() and beginMap()/endMap() blocks.
Change-Id: Icaf23b2fe58a3e1f575b81e4a100f02684f68452
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Several of the unit tests request that the peer emit more than one
signal, but only handle one. The rest of the signals stay queued in the
socket and will be delivered at the next test, causing it to fail often.
This doesn't happen in the tests with the bus. There, we don't receive
the extraneous signals due to AddMatch/ReceiveMatch on each signal
individually and the synchronous nature of the emission (the signals
have already been emitted by the next AddMatch and cannot match it).
Task-number: QTBUG-42145
Change-Id: I743a0553074972042fca46b76db5d9e7b3209620
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Convert qWait to QTRY_ where we can, and make the qWait durations explicit (not
buried in a function call, but inline in the actual test) where we can.
Total runtime for me goes from 91 seconds to 2 seconds.
Change-Id: I45b3562cb94721a521718365fd51a4172a2e4e18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That long call chain is screaming "here, I'm dereferencing dangling
pointers! Valgrind me!" but 2006 Thiago didn't see them...
Change-Id: I44de5aea113d05edec2227e9db6be8cec9303be9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The main test won't find them if they are.
Change-Id: Iae3ffe4c0289a0c88d46c1bd2e414c20def89ab4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
D-Bus libraries were recently added to OS X 10.7 making these
tests to be executed for first time.
Task-number: QTBUG-37469
Change-Id: Ia7a74a45b18d4a645307f7fb7666236c5e009e5f
Reviewed-by: Simo Fält <simo.falt@digia.com>
It has been discovered it changes the behavior of qdbuscpp2xml
resulting in builds of some apps breaking. Even if the
behavior is more correct, such behavior change in a stable branch is
not acceptable
Change-Id: I1d79104ebf11c3f48c84f109be2926af96cddae7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without it the invocations were working but were not listed on introspection
Change-Id: Ie62f7dc3577f52b6888ddebf0392fdf51f2845d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not attempt to lookup the service owner on peer connections (it will
fail).
Make QDBusAbstractInterface::isValid() return a sensible result on peer
connections, instead of always returning false.
Task-number: QTBUG-32374
Change-Id: I1b02feaffb3b255188f8d63306f89f5034a32f22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVariantMap would work too; I presume this is why the annotation is needed,
rather than QtDBus automatically figuring out which type to use.
This even checks that QHash<QString,QVariant> works in the annotation,
although QVariantHash would be simpler to write, obviously.
Change-Id: I7a339ca90f10e5ec97dcea1bb4dbba3c515e6b23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
in order to test for regressions in qdbusxml2cpp too.
Change-Id: Icd2a6f319c5fabf0b0f2a1fe8c70afcd2c84263e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
This has been broken forever, just like generic signal
disconnection. It didn't use to show up before because in Qt 4,
QObject's destructor would not call disconnectNotify().
Just like in the previous commit, we need to verify whether the signal
was disconnected from the last receiver. A wildcard disconnect might
be disconnecting only from a specific receiver.
Task-number: QTBUG-29498
Change-Id: I0790128ea878fdf3ac563c99d96c6aa7d270e9a3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
There has been a latent bug forever in QtDBus that would make a signal
disconnect actually disconnect too much. The reason is that
disconnectNotify() is called every time a signal is disconnected from
a receiver, but that doesn't mean it was the last connection.
This test checks whether disconnecting from voidSignal() to our test
receiver will also disconnect from exitLoop(). If it does, we'll get a
timeout. I could have implemented it with two receivers, but in the
buggy case, it would always fail first in the timeout verification.
Change-Id: I5766d8a38594eb25e65b304913251303660fad41
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In Qt 4, QSignalSpy didn't *really* connect to the signal it was
spying on. See the "we need to connect the signal somewhere in order
for D-Bus to enable the rules" comments.
In Qt 5, it connects, which rendered this section of the test bogus:
since the signal is still connected, the QSignalSpy will notice that
fact and will not be empty. This is passing due to a false
positive. The upcoming fix breaks it, so we need to remove it.
Change-Id: Ic8fbf7d0e941403e97149f5bc392334a52c66ab1
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
The new member variable activeChildren shall contain the number of
direct children that are active. This number differs from
children.count() because the vector may contain empty entries that
haven't been garbage-collected yet (obj == NULL and activeChildren ==
0).
When this count drops to zero, we know we can simply erase the vector of
children.
Change-Id: Ia20604d3fac852ea4a6e8862d934fbb936fa5e18
Reviewed-by: David Faure (KDE) <faure@kde.org>
QDBusReply allows one to extract a QVariant and the type reply from an
error reply and getting a default-constructed value. This is useful when
a valid reply can never contain the default-constructed value (0, false,
empty strings, empty arrays, etc.), so it simplifies error checking.
More importantly, qdbusxml2cpp was changed a while ago from generating
QDBusReply to generating QDBusPendingReply, so we need to have the same
behavior.
Task-number: QTBUG-29046
Change-Id: Ia873b9fd4311c0d4e94f0ef623ba405c20bc0e8c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
In some cases, the type is required to be registered with the typedef
name, so those Q_DECLARE_METATYPE uses remain for now. In a future
patch we can also remove those and the typedefs themselves.
Change-Id: I5721955c86f566ae09024203954840f817bd3088
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As recommended by Giuseppe, don't rely on the env var, but use the
internal but exported seed atomic int. This way, the compiler will
detect breakages, rather than runtime.
Change-Id: Iec2bc88c53532d3463d2dc5c73631fc9bc34747b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid QHash randomization so that the order of the XML attributes is stable
This was causing intermittent failures.
Change-Id: I4cc0dba4b0c2ec36601f3b06fb17ff80005cc9fb
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Commit 0696071316 moved away from QDom but
also lost the ability to fill the introspection field of the created
QDBusIntrospection::Interface instances. This commit now generate the
string again as we proceed with the QXmlStreamReader based parsing.
Task-number: QTBUG-26668
Change-Id: I8f406e1f4e9d3e667a8557db69da36cac369ba4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Omit the whole test and relative types if DBUS_TYPE_UNIX_FD is not defined
since the test is not relevant in that case (D-Bus library too old).
Change-Id: I167622f485c0f34d64984c4fa96be974e54f56bc
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Create a new QDBusConnectionPrivate for every new connection in
qDBusNewConnection instead of creating a single QDBusConnectionPrivate
in the QDBusServer constructor which gets assigned the latest connected
DBusConnection in qDBusNewConnection (and loses track on all previous
DBusConnections).
Also extend tst_QDBusConnection::registerObjectPeer() test with multiple
connections to the server.
Task-Number: 24921
Change-Id: I4341e8d48d464f3fe0a314a6ab14f848545d65a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I807b0e88ac71a0cb367fb4170cca8f2cb0ad43f3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
I wrote nonsense in that commit. The older methods that take a timeout
all take milliseconds, and the comments in the unit test really meant
milliseconds, not seconds. 1s is not shorter than 100ms....
Change-Id: Ic18899bb0462d89575dc5a9a311478adc4dea1cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Lots of uses of the annotations and error names, plus a bunch of local
unit test names (including one file that had to be renamed).
The meta object generator is updated to support both the old and new
names. That means some references to com.trolltech *must* remain in the
source code.
Task-number: QTBUG-23274
Change-Id: Icc38ae040232f07c437e7546ee744a4703f41726
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Change the old com.trolltech ones to org.qtproject and introduce Use
the alternate domain name for the Qt Project because the dash
character is not valid in interface and error names.
Task-number: QTBUG-23274
Change-Id: Iac1699e70525d67f983c10560932acff6b2ecde6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Instead use QMap if we want a stable order.
Task-number: QTBUG-24995
Change-Id: I93f643df236f5078768f539615fa47163e5262e8
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They predate Qt 4.5, but it looks like the comments are indicating
that QVariantList and QVariantMap types will use the basic template,
but that is not the case. Instead they will use the compare
specializations for QList<T> and QMap<T> respectively.
Change-Id: Iebf7e9b8aaa8a699ea720090fbf641dfecde0ff7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a semi-automatic search, so I'm
reasonably sure that all the exported ones
have been caught.
Change-Id: I314d341ad0db4e9d4bbf353a9537c9422ad8a54b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCOMPARE should only be used in a test function because it makes the
test function return if the compare fails. The test wants to compare
without returning on failure because the compare is inside a helper
function called by many test functions, so the test was calling
testlib's internal QTest::compare_helper() functions instead of
QCOMPARE.
This commit makes this code slightly less objectionable by calling the
public QTest::qCompare() instead.
Change-Id: Ida17a641e89f8a297d6a036449f44b33aa266368
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adapts QDBusMetaObject to be in sync with the moc/meta-object
changes for property and method descriptors (storing the name and
argument count of methods, and more elaborate type information).
Now that the method name is stored in the standard method
descriptor, QtDBus doesn't need to store it separately anymore,
and the QMetaObjectPrivate::rawStringData() function can be
removed.
Change-Id: I04efdbe05b52bbd85405e1713509e55308ac42da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QVariant::Type is marked as obsolete. It is not possible to get rid of
it completely, in a source compatible way, but at least we can remove it
safely from a method arguments list.
Change-Id: I26b58099bfa6d32f3a583a8ae0047f0bb36bcd0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was written incorrectly in a way which happened to allow it to
pass most of the time (but not all the time).
Reset the state of test objects between each test function, and mark the
broken functions with QEXPECT_FAIL and a link to a task.
Replace the unusual WaitForPinger construct with the usual
QTRY_VERIFY/QTRY_COMPARE method of verifying asynchronous operations.
Task-number: QTBUG-24262
Change-Id: I82d09002307c0b500bf60cd5b583674321b37609
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Replace the QDom based code in qdbusxmlparser
with code using QXmlStreamReader.
Task-number: QTBUG-20856
Change-Id: I294e3ebd6faa813c20806be3ae225ac00befb622
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QByteArray extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QByteArray when the value actually is e.g. a struct of
mixed types the byte array extraction will crash as it attempts to extract
the struct data as a fixed array.
The fix adds DBus type checks to QDBusArgument byte array extraction
operator implementations.
The checks invalidate extracting arrays of other types than bytes to a
QByteArray that worked with the unchecked implementation. The rationale
for this restriction is
1) extracting a QByteArray to a variant checks already that the array
element type is byte
2) Results of extracting arrays of types wider than a byte to a QByteArray
are architecture-dependent making such code inherently non-portable.
Task-number: QTBUG-22840
Change-Id: Ie20f2adc06c697a68055c803215fb408568fdd90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QStringList extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QStringList and the value actually is e.g. an array of
bytes the string list extraction will crash as it interprets the bytes as
char pointers.
The fix adds DBus type checks to QDBusArgument QStringList extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Task-number: QTBUG-22840
Change-Id: I4b67d75b59c5052d939f3a69f3e92dabdb3bdd6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument string extraction operators and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting string-like basic DBus type that actually is e.g. an
integer the string extraction will crash as it blindly attempts to use the
integer as a pointer to char.
The fix adds DBus type checks to QDBusArgument string type extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Previously supported functionality of extracting an object path or type
signature to a string type is retained.
Task-number: QTBUG-22840
Change-Id: I29be1ae592658ca268c65ed692e1d42619d52280
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
