On some platforms (like UWP) files that are copied during
qfile auto tests are not writable by default. The cleanup will fail for
these files if the permissions are not set accordingly.
Change-Id: Id925dcadfc6b505c87f1f55d5ea05e286b60a5a5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Ceiling width/height fails to take into account rects that do no have
their top left position on an exact point boundary.
Example: QRect(0,0 20x20) and QRect(1,1 20x20) with scale 2.0 would give
the same result of QRect(0,0 10x10). The correct rects are QRect(0,0 10x10)
and QRect(0,0 11x11), so that we are sure to repaint all pixels within the
exposed region.
Before 5138fada0b, rects were also rounded incorrectly. The old method
would give the result of QRect(0,0 11x11) in both cases, causing the
exposed region to be larger than a window.
Amends 5138fada0b
Task-number: QTBUG-63943
Change-Id: I9f3dddf649bdc506c23bce1b6704860d61481459
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
So far we just write ... '.'. , which looks weird.
Change-Id: Iac6fc781c80976994ea0a182b55958baa39a7e52
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
This patch works around Windows X86 on QEMU antics.
It appears on this platform the test behaves in some unpredictable manner:
- WSAConnect with 255.255.255.255 does not always immediately fail with
some error, so socket engine waits for a connection timeout (30 s.),
but the test itself
- only waits for 5 seconds and then tests that a request has finished with
error, which is not true (we are still connecting).
To make it work - whenever we have bearermanager feature enabled, set
a connection timeout to something reasonable, not 30 s.
Since we try to connect to each address twice, make timeout 1.5 s
(so it's 3 s. in total and still is < 5 s.).
Task-number: QTBUG-64264
Change-Id: I1d40c140667fca8402ec9344e66d313b6df54256
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Clang compiler defines fallthrough, but wrongly detects QT_HAS_CPP_ATTRIBUTE(fallthrough).
This makes compiler breaks compilation due clang be expecting
clang::fallthrough.
Change the order makes the exceptions. clang/gnu, been tested before
the generic, setting then proper defines at end.
LLVM-bug: https://bugs.llvm.org/show_bug.cgi?id=33518
Change-Id: Ic287e9028936af3bdade5c1ee319ca8914b36ea7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Contrarily to what the comment stated, we actually rely on automatic
menu validation, even for submenu items. This is visible in the menu
delegate's validateMenuItem: and itemFired: methods.
This solves the last visible issue in BigMenuCreator where, under
ASP/ASP, ASP/SAP, SAP/ASP and SAP/SAP, all A*S submenus would be
disabled. The cause was an incorrect target/action setup.
Menurama still behaves as expected.
Change-Id: I2599d6fb0d51f56f5d36f03b69647e35ff6c550a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
In QMainWindow::setMenuBar(), we hide and schedule the current
menubar, if any, to be deleted later. However, it remains installed
as its whole ancestry's event filter, which could conflict with the
newly assigned menubar until the old menubar is destroyed. In our
case, we have noticed issues with the Cocoa QPA plugin.
We force uninstalling the old menubar as event filter by setting its
parent to null, pending its deletion shortly after.
This fixes BigMenuCreator's empty menubar when calling it with only
the "--new-menubar" option. It also fixes QTBUG-34160 example which
was not behaving as well as it should.
Task-number: QTBUG-34160
Change-Id: Ifefb72affad01e7b7371005442074afd6a39a5b8
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When one of the menubar actions changed, we would omit to
update several properties on the platform menu, most notably
its title.
Manual tested with BigMenuCreator, where the sequence
menu->addAction(action); // A-operation
action->setMenu(submenu); // S-operation
would result in an "Untitled" menubar item on macOS, and this
regardless of when the submenu is populated.
Change-Id: I43989f36f6bf3f0b7056310ac986c06f8e02f128
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This saves 32 bytes per instance on 64-bit macOS, from 888
down to 856 bytes.
Change-Id: I2592631aa3566d2eab72bad338aacfe76bee8ef3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Xcode 9 introduced the main thread checker, which detects invalid
use of AppKit, UIKit, and other APIs from background threads.
https://developer.apple.com/documentation/code_diagnostics/main_thread_checker
In our case these are accesses to e.g. [UIView layer] and
[UIScreen scaleFactor] from the render thread of QtQuick,
things we should look at, but that might not be easily solvable.
In any case, these are not warnings the user can do anything about,
so in lack of a per-library disable of the checker, we have to
globally disable it for the whole Xcode project.
Task-number: QTBUG-63822
Change-Id: Ibfcdf23891cf6bfbbc9b9b3349e4c256c273c7de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The glyph cache resize is clearly doing something that is not actually
legal with OpenGL ES. Until this gets investigated properly, add the
Vivante GC2000 (found in the commonly used i.MX6 quad) to the list since
reports show that the issue occurs there as well.
Task-number: QTBUG-49490
Change-Id: Ia890346d8dbb1691bc113e2ef522713ba6709393
Reviewed-by: Louis Kröger <louis.kroeger@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
All code should be using the license header in header.BSD or header.FDL
now. If modules still use outdated headers, they should be fixed or
as a stop-gap measure add header.BSD-OLD, header.FDL-OLD files locally.
Change-Id: If462f1646ab413c18d2d3c61197773dca2a036ec
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
I updated signals and slots and for each loops to the new syntax and
replaced most free functions with std::function.
Task-number: QTBUG-60641
Change-Id: I7693f81f71c7f53fcbe83189a0de2fb76ddf99a8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This fixes an upstream bug in the existing version 1.6.32 which would
cause certain valid png files to be rejected.
The remaining diff to clean 1.6.34 is archived in the qtpatches.diff file.
[ChangeLog][Third-Party Code] libpng was updated to version 1.6.34
Task-number: QTBUG-63950
Change-Id: Ie6f2a09c78a93b6e5623848776b75650bb5bca66
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This test was failing recently on Windows 7, mingw, x86. It's not
failing now and attempts to reproduce the failure on CI's VM were
unsuccessful. Anyway, just reading the code is enough to spot
race-conditions: two threads are accessing two shared boolean
variables without any protection.
It's unclear if these races were the reason why the test was failing,
but we fix them for good anyway. Also, a failure to start a thread
or to start listening on a TCP socket is not treated as XML-related
failure anymore and QSKIPped instead.
Change-Id: I5115ce6c33cafc91485f8cf6e7e268d954976556
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When a section is hidden, QHeaderViewPrivate::cascadingResize() does
resize a section even it is hidden. This leads to space between the
neighbor sections and also some unneeded calculations.
Task-number: QTBUG-54601
Change-Id: Ie139417ae2c77ef25e66cf628bfe400185f88ee8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test contains Oracle specific queries and will fail for other DBMS.
Currently it doesn't fail, because it is skipped for drivers that doesn't
support BatchOperations and only QOCI supports batch operations.
Change-Id: I8f1e7c7244726fa11c841023dec186553747a6b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Qt draws the backing store to the window using CoreGrahics,
which will trigger a slow RGB32 -> RGB64 conversion
when the output display is a deep color display.
Disable NSWindow dynamicDepthLimit and force the depthLimit
to WindowDepthTwentyforBitRGB for the common case of
8-bit-per-component raster surfaces.
This was benchmarked by resizing a simple QRasterWindow
test case which fills the window area using QPainter::fillRect().
Before:
67.1% rgba64_image_mark_rgb32
10.8% __vImageCopyBuffer_block_invoke
6.0% madvise
5.0% _kernelrpc_mach_vm_deallocate_trap
4.1% qt_memfill32(unsigned int*, unsigned int, int)
After:
30.7% __vImageCopyBuffer_block_invoke
20.3% madvise
12.3% __vOverwriteChannelsWithScalar_ARGB8888_block_invoke
12.2% qt_memfill32(unsigned int*, unsigned int, int)
4.6% _kernelrpc_mach_vm_deallocate_trap
The test program now spends significantly more of its
time allocating/deallocating the backing store (madvise),
and running the Qt paint event (qt_memfill32).
Task-number: QTBUG-47660
Change-Id: I878be7a0e6eee4ad798f7a53f7f9f79b7950af26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Bitmap glyphs are returned prescaled, which means we should include
the transform in their bounding box.
Additionally painting them should stick the smallest rect to avoid
writing outside the allocated area, and assert in debug builds.
Task-number: QTBUG-64239
Change-Id: I5f877d36566891323f528018f910798344ba4ce2
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
The algorithm triggers on the word "cursor" in the device name, which
would also happen for devices from the manufacturer Cursor Controls.
Task-number: QTBUG-48034
Change-Id: I9645c0d0bc1fa951d0ea00480572fd0df0220eb5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
According to Qt documentation http://doc.qt.io/qt-5/sql-driver.html#qpsql
minimum supported version of PostgreSQL is 7.3
Change-Id: I30cffaddc29fd56b534bfd259cc235ea1204a21f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Set byte_output to 'escape' mode for server version 9 and later,
no matter what version of client library we use.
Since setting byte_output doesn't depend on client version anymore,
we can move it to separate function.
This fixes qtbase\tests\auto\sql\kernel\qsqldatabase
tst_QSqlDatabase::psql_escapeBytea() test
(before this change test did not pass on PostgreSQL 9.6)
Change-Id: I37aaa18267d7e6459c00010ed899536c01e8124e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Fixed parsing version string for PostgreSQL.
PostgreSQL versioning changed since version 10, see link:
https://www.postgresql.org/support/versioning
Extended QPSQLDriver::Protocol enum for PostreSQL 9.x and later,
added underscore to item names to separate major and minor version.
Changed long switch-case statements to if-else.
Change-Id: Ib19ae7ba426f262e80c52670e7ecb3532ff460a0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test is flaky on Unity due to regression introduced by QTBUG-39362.
Skip the test functions until QTBUG-39362 is resolved.
These test functions do not fail on Gnome and KDE, so the functionality
tested by check_cursorKeys* will be covered by other linux distributions
in CI.
Change-Id: Ifd1a7779a9728142424f4956dd6466c822ccde91
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If you had never used QHash before, this function returned -1. That's
not useful if you're trying to implement your own QHash that uses Qt's
global seed.
Change-Id: Ib0e40a7a3ebc44329f23fffd14b2e875b970a55c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not attempt to copy directory items, which will fail and result
in empty result lists. Amends 5865e582fd.
Task-number: QTBUG-57070
Task-number: QTBUG-63645
Change-Id: I59efce196b28099ec8aff5a802ef0a4d9a098453
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Qt cannot handle places like 'Network', etc.
Task-number: QTBUG-63645
Change-Id: I53d0eedc2996af6a1ec3230e3d65a3e272aa3710
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Previously, the native event filter listening on removable drivers
was installed on QCoreApplication::eventDispatcher() which led to
a mismatch when launched from a non-GUI thread since
~QAbstractNativeEventFilter() removes itself from
QAbstractEventDispatcher::instance().
Amends 45580aa925,
e612fe8d47.
Task-number: QTBUG-64171
Change-Id: Icbe289bd585f124d66989d0cd574040b986e680c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both of the new toolchains (armv7 + arm64) have some problems with d-bus
tests. Skip them until the toolchain has been fixed.
Task-number: QTBUG-60263
Change-Id: Ic300f419635fb6b49b3ea7f48fa76c19088c88bd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
When the dataChanged() signal is handled by QIconModeViewBase, the size
of the items are recalculated. During this operation the optional
grid size is not taken into account which leads to a screwed up layout.
This patch adds the missing check similar it is done in
doStaticLayout()/doDynamicLayout().
Task-number: QTBUG-45427
Change-Id: Iba7adb44b1510c511a69c289ccb4f168992a6871
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If a window is blocked by a WindowModal dialog, it should not be
possible to trigger window shortcuts on that window if it receives
a WindowActivate event.
This currently happens if the blocked window gets clicked, because the
window becomes the active_window and then QApplication sends it a
WindowActivate event (this doesn't happen with application modal dialogs).
The correctWidgetContext() function calls QApplicationPrivate::tryModalHelper()
only if the shortcut context is ApplicationShortcut. This patch makes it
call even if the shortcut context is WindowShortcut.
Change-Id: Iff87d85bcae603a6a24128e0cedfa9d33b6485fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
udev encodes the labels for /dev/disk/by-label/ with ID_LABEL_FS_ENC
which is done with blkid_encode_string(). This function encodes some
unsafe 1-byte utf-8 characters as hex (e.g. '\' or ' ')
Task-number: QTBUG-61420
Change-Id: If82f4381d348acf9008b79ec5ac7c55e6d3819de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A regression was introduced with a3d59c7c7f
which caused dragging to fail within a modal dialog on the XCB platform.
By adding an exception for the QShapedPixmapWindow, which is the window
used for the drag, we can allow that to continue to work whilst blocking
to the other newly created windows.
Task-number: QTBUG-63846
Change-Id: I7c7f365f30fcf5f04f50dc1a7fff7a09e6e5ed6c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
