EGL support in src/platformsupport/eglconvenience requires OpenGL ES
to be enabled, so it makes no sense to test for the presence of EGL if
we're not enabling OpenGL ES.
EGLFS has similar requirements, so ensure it gets disabled
too. Otherwise we're going to get lots of undefined symbols in the
EGLFS plugin to things in QtPlatformSupport that did not get compiled
in either.
Change-Id: Ie55dd2e2597ec0594aa589ee8aac150c71104b46
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Ensure corelib and the iconv configure test link against libiconv on QNX-based
platforms. This now includes the Blackberry mkspecs which were
previously excluded.
Change-Id: I60677ab8506b7cf47f504b880bb1078036984e85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
There's not much point having this with the xcb plugin being present, and xlib
is pretty much unmaintained / broken anyway.
Task-number: QTBUG-24913
Change-Id: I090a9a0e6d2f893c030574e23f1d59f610282bd3
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Rick Stockton <rickstockton@reno-computerhelp.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Instead of getting errors just to feed them to the default error handle,
the corresponding unchecked request is used which automatically makes
errors go to the default error handler.
Change-Id: Ib213a860affb72de6f9896f68505e283a809d58f
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This test allows us to recreate any modal scenario. Multiple top-level
windows with any depth of window and application modal dialogs is
possible.
Change-Id: Ieef2c557d2f9ad2d2b2d2b598e9415f4c1e2dcb5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This type is not a typedef anymore, it's a proper class.
Change-Id: I611df067f2983baf262d84a82fb98e61124956d2
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Some code intended to be disabled when QT_NO_PRINTDIALOG is defined
was being compiled due to misplaced #ifdef and/or #endif.
Change-Id: Ic8587872fae03cac2895e54e34f8f20cb575d92b
Reviewed-by: John Layt <jlayt@kde.org>
See e.g. f3141c58ba for rationale.
The problematic part here is the array member
which in C++98 cannot be initialised in the
ctor-initializer-list. For this, C++11 Uniform
Initialisation is needed, for which Qt does
not yet have a Q_COMPILER_* macro. I'm not sure
we need one, either, since I doubt that there's
a compiler that implements std::initializer_list,
but not uniform initialisation.
Change-Id: I4fa8f4f9db8703096358634fb2e6f5de61f0fedd
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The speed calculation caused a dived by zero exception.
Change-Id: I83281c8e66b9c18e7d282920901ccac1e9444a68
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On RTL layout, right key should move to previous button, and left key should
move to next button.
Task-number: QTBUG-15790
Change-Id: If0753f9082b3a3624b95276840f5f3799b5e14bf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
For FreeType Windows font database, use the application font loading
implementation of the parent class.
For native Windows font database, the implementation was adapted from
Qt 4.8.
Also fixed a bug in font database population, where old data was not
destroyed before population, resulting in fonts not getting properly
repopulated when a new font was added.
Task-number: QTBUG-24193
Task-number: QTBUG-24195
Task-number: QTBUG-24196
Change-Id: Ie224a87baf7500b9867aaafa807f62dd4503dee8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is implemented for GCC, ICC, Clang and MSVC. With this macro, the
compiler can generate better code because it knows that the function
being called will not return.
Change-Id: Iea2bc7be464606639be65ccb73911d7ed1b29a64
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Feature to be reimplemented simplified. Cases when input method
needs to be reset with possibility to commit use
QInputMethod::commit() again.
Change-Id: Ibfe7aecc0799e7a76c7ac4f5d860971cfe6e97ca
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
- Allocate gamma tables on the heap in a thread-safe way, use
font smoothing returned by the style hints of the platform to
calculate them.
- Improve font rendering on Windows.
Change-Id: I8cd39b51cf03cbd642474c02b9076814baecd597
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Commit 5e9089135b had some problems:
* It left out the cast to IServiceProvider in the refactoring of
QueryInterface. This broke IAccessible2.
* It also failed to enable the codepath for MinGW inside wrap(), which
effectively caused MSAA for MinGW to be disabled.
It also adds an autotest to the bridge (finally). It is simple,
but it should help avoiding committing stuff that completely breaks
the bridge.
Change-Id: I459d89c3bdb93e54ddea85872b50fc1dba0fe4a0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qcocoawindow.mm:99:7: warning: field 'm_glContext' will be initialized
after field 'm_inConstructor' [-Wreorder]
, m_glContext(0)
^
Change-Id: I9e090ddeeaeea581b480b2e7b2b99360062c0632
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
PLATFORM_QPA is always true
PLATFORM_X11 is always false
remove/collapse all related conditional statements to lend greater clarity
to the configure script
Change-Id: I4998edf5402019370333ed79effcd0cacafbe87d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The code in question was already commented out before the test was added
to the Qt repository in 2006. After changing the code to use
QFile::rename() for portability, the test appears to pass.
Change-Id: I52a8578a47da419cabf5826b633cc4f2ac2c5218
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The warning is presented now that we use __assume in every
Q_ASSERT. It presents itself in code that calls functions, like:
tools/qbitarray.h(128): warning #2261: __assume expression with side effects discarded
{ Q_ASSERT(i >= 0 && i < size());
^
Change-Id: I5851b3c35b56c00b9c541c2489233121ef621e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
This autotest gives different results on consecutive runs, and is
therefore insignificant for the purpose of detecting regressions.
Task-number: QTBUG-24977
Change-Id: I5c4dfd663ce5df6b60ae47a29d332c06e3c0585f
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This silences warnings from valgrind about a conditional depending on an
uninitialized value.
Change-Id: I819a44ed5dc02e163c00849811870c94f66b6651
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
That compiler is no longer supported
Change-Id: I6ff9003a8b986478850ad2e6e6662a44264236d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If we deprecate the entire class, then we get the warning for every use
of it with GCC, including the three operators defined inside the class.
So instead, mark as only the constructors as deprecated, which should
reduce the warnings to the places where the class was instantiated.
That should be enough to poison the code enough: to fix the warning, you
need to stop using the class there and/or stop calling one of the
deprecated functions that deal with it.
Unfortunately, we still get one more warning inside the inline code, in
QImage::textList. To remove that warning, we disable all deprecation
warnings around that code block.
Change-Id: If3c11647a9d2cab055e15810d7cfe0d8f5e7042f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Unlike QNX mkspecs, these mkspecs target more specific, BlackBerry-only
devices. So far, the only difference is the definition of Q_OS_BLACKBERRY
and linking with -lbps, but this will likely change with time. It will also
allow conditional compilation to distinguish between qnx and blackberry
devices.
Change-Id: Ia44e9b4059f720c308240e9dac7e90f7ae7920d0
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The static qt_mac_is_sheet() function in qcocoafiledialoghelper.mm was
not called anywhere, remove it.
Change-Id: I88785e15aa17ae9c9ffbc33eba30433c8834b798
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Silence warnings about unused function parameters and local variables
while building the Cocoa platform plugin.
Change-Id: I6aedc4cb21c5fb48d2d6e501561473d3f7112aed
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Remove unused (and misspelled) flipedRect() function, as well as several
unused variables.
Change-Id: I48a5bf2eaad67686f60523a5c22262cad5314128
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
clearNSWindow() should also clear the delegate and remove the
contentView from the window, since we are no longer using that window.
Make sure the QCocoaWindow::~QCocoaWindow() doesn't release the
m_contentView until after clearNSWindow(), to avoid crashes while
trying to cleanup the window and view.
Change-Id: Ia081488f629a4fd4cf10fb1053fb8183b1914d35
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Calling raise() on a hidden window should not show it. The setVisible()
function will ensure that the window is raised (since we use orderFront
or makeKeyAndOrderFront). This fixes the failing
tst_QDockWidget::task169808_setFloating() test as well.
Task-number: QTBUG-24774
Change-Id: If34472ebbcd615c10654efafd54c84c03d10bc8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
THe UK still uses the Imperial system at least for distances
and many other things.
Change-Id: I99379de35620114328ad6a7fc9b226a46692bedd
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Replaced hard coding as QT_GUI_PASSWORD_ECHO_DELAY with
a style hint.
Change-Id: I0b78ebad723dbe19d9b9496583203e31545874e2
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Apparently there are still issues here and there (e.g. in declarative)
with properly recognizing more complex event sequences (like triple
clicks). The behavior of qtbase is correct but we need a test case
that makes sure the functionality will not regress.
Change-Id: I08c558fcfdde0dd06e194b4f0affc6f6896573bf
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Qt and Cocoa opacity levels are compatible, so we just need to forward
the setOpacity() argument to [NSWindow setAlphaValue]
Change-Id: I5fd5678894fd6949811ad1c4b493e592561f01f6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Start from 2.9, fontconfig will reset the result to FcResultNoMatch at
the beginning of FcFontSort().
According to
http://lists.freedesktop.org/archives/fontconfig/2012-March/003857.html
the result value of FcFontSort() can be ignored, checking the nfont
value of the fontset returned is sufficient.
The fix works for pre-2.9 versions as well, since those versions don't
touch the result at all.
Change-Id: Iba6c1157e314088a90867292a4bd970bb873e284
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This implementation was disabled and didn't really work
properly, so it doesn't make sense to update or do
bug fixes to it. Removing it completely instead.
Change-Id: I62abe35f0f9a91bb207b87296d25c3c62d58228e
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Use qt_scrollImageInRect() from QtGui to accelerate scrolling in the
Cocoa plugin.
Change-Id: I8ad1377ed3307345f72d17c72049cec5472c97d3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Make sure that the keybaord modifiers are maintained properly when
handling window system events.
Change-Id: Ie75cbe5eb509c29e3d2291694f2de509fbf3098a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Implement -flagsChanged: in QNSView so that we can calculate the
necessary modifier key events to send.
Change-Id: I3de89537d6e22b4a6d69ae646a71d9722dd9f82a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The NSWindow we create could either be a QNSWindow (our NSWindow
subclass) or a QNSPanel (our NSPanel subclass).
Change-Id: I6e5c18328bf0fd1786a042d1fddc5b3e8be17f89
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Appears as though the QT_NAMESPACE macros are incorrect here.
In fact in qisenum.h because the #define is no respecter of a namespace
in most of these conditional compile cases they will be ignored
effectively. The QT_HEADER also - if qtypetraits.h conditional compile
occurs then it will result in adding extern "C" { twice. For the macros
invoking them will not cause the extern "C" { to be used anyway, so just
remove this altogether.
Task-number: QTBUG-24903
Change-Id: I710dc330f58357f395241a0cf3172e41a5864576
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Glenn Watson <glenn.watson@nokia.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
